Linux RTC
[Prev Page][Next Page]
- Re: [GIT PULL] RTC for 5.6
- [GIT PULL] RTC for 5.6
- Re: [PATCH v8 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- [PATCH v8 3/5] mfd: Add support for the MediaTek MT6358 PMIC
- [PATCH v8 5/5] arm64: dts: mt6358: add PMIC MT6358 related nodes
- [PATCH v8 2/5] dt-bindings: mfd: Add compatible for the MediaTek MT6358 PMIC
- [PATCH v8 1/5] mfd: mt6397: modify suspend/resume behavior
- [PATCH v8 4/5] rtc: mt6397: Add support for the MediaTek MT6358 RTC
- [PATCH v8 0/5] Add Support for MediaTek PMIC MT6358
- Re: [PATCH v7 3/6] mfd: Add support for the MediaTek MT6358 PMIC
- Re: rtc rtc0: Timeout trying to get valid LPSRT Counter read
- Re: [PATCH] rtc: class: support hctosys from modular RTC drivers
- Re: rtc rtc0: Timeout trying to get valid LPSRT Counter read
- Re: rtc rtc0: Timeout trying to get valid LPSRT Counter read
- [PATCH 14/17] rtc: cros-ec: Use cros_ec_send_cmd_msg()
- [PATCH 00/17] platform/chrome: Replace cros_ec_cmd_xfer_status
- Re: rtc rtc0: Timeout trying to get valid LPSRT Counter read
- Re: rtc rtc0: Timeout trying to get valid LPSRT Counter read
- Re: rtc rtc0: Timeout trying to get valid LPSRT Counter read
- Re: rtc rtc0: Timeout trying to get valid LPSRT Counter read
- Re: [PATCH] dt-bindings: rtc: at91rm9200: document clocks property
- [PATCH] dt-bindings: rtc: at91rm9200: document clocks property
- [PATCH 4.9 047/271] rtc: cmos: ignore bogus century byte
- Re: [PATCH 2/9] dt-bindings: rtc: at91rm9200: convert bindings to json-schema
- [PATCH 4.4 037/183] rtc: cmos: ignore bogus century byte
- Re: [PATCH] rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
- Re: [PATCH] rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
- Re: [PATCH] rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
- Re: [PATCH] rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
- [PATCH 2/2] rtc: Kconfig: select REGMAP_I2C when necessary
- [PATCH 1/2] rtc: Kconfig: properly indent sd3078 entry
- Re: [PATCH v2 3/3] rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper
- Re: [PATCH v2 2/3] rtc: cmos: Use predefined value for RTC IRQ on legacy x86
- Re: [PATCH v2 1/3] rtc: cmos: Stop using shared IRQ
- Re: [PATCH v1] rtc: tps6586x: Use IRQ_NOAUTOEN flag
- Re: [PATCH 4.19 143/639] rtc: cmos: ignore bogus century byte
- [PATCH 4.19 143/639] rtc: cmos: ignore bogus century byte
- [PATCH 4.14 071/343] rtc: cmos: ignore bogus century byte
- [PATCH v3] rtc: pcf85063: Add pcf85063 clkout control to common clock framework
- [PATCH v2] rtc: pcf85063: Add pcf85063 clkout control to common clock framework
- Re: [PATCH v10 11/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
- [PATCH v2 3/3] rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper
- [PATCH v2 2/3] rtc: cmos: Use predefined value for RTC IRQ on legacy x86
- [PATCH v2 1/3] rtc: cmos: Stop using shared IRQ
- Re: [PATCH v1 1/3] rtc: cmos: Stop using shared IRQ
- Re: [PATCH] rtc: pcf85063: Add pcf85063 clkout control to common clock framework
- Re: [PATCH v1 1/3] rtc: cmos: Stop using shared IRQ
- Re: [PATCH v1 1/3] rtc: cmos: Stop using shared IRQ
- Re: [PATCH v1 1/3] rtc: cmos: Stop using shared IRQ
- Re: [PATCH v1 1/3] rtc: cmos: Stop using shared IRQ
- Re: [PATCH v1 1/3] rtc: cmos: Stop using shared IRQ
- [PATCH v1 3/3] rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper
- [PATCH v1 2/3] rtc: cmos: Use predefined value for RTC IRQ on legacy x86
- [PATCH v1 1/3] rtc: cmos: Stop using shared IRQ
- Re: [PATCH v1 1/8] rtc: cmos: Use shared IRQ only for Microsoft Surface 3
- Re: [PATCH v1 1/8] rtc: cmos: Use shared IRQ only for Microsoft Surface 3
- Re: [PATCH v1 1/8] rtc: cmos: Use shared IRQ only for Microsoft Surface 3
- From: Guilherme G. Piccoli
- Re: [PATCH v7 3/6] mfd: Add support for the MediaTek MT6358 PMIC
- Re: [PATCH v12 00/10] Support ROHM BD71828 PMIC
- Re: [PATCH v12 00/10] Support ROHM BD71828 PMIC
- Re: [PATCH v1 5/8] x86/quirks: Add a DMI quirk for Microsoft Surface 3
- Re: [PATCH v1 5/8] x86/quirks: Add a DMI quirk for Microsoft Surface 3
- Re: [PATCH v1 7/8] ASoC: Intel: Switch DMI table match to a test of variable
- [PATCH v12 10/10] rtc: bd70528: add BD71828 support
- [PATCH v12 09/10] mfd: bd70528: Fix hour register mask
- [PATCH v12 08/10] regulator: bd718x7: Split driver to common and bd718x7 specific parts
- [PATCH v12 07/10] clk: bd718x7: Support ROHM BD71828 clk block
- [PATCH v12 06/10] mfd: bd71828: Add power-key support
- [PATCH v12 05/10] mfd: bd71828: Support ROHM BD71828 PMIC - core
- [PATCH v12 04/10] mfd: bd718x7: Add compatible for BD71850
- [PATCH v12 03/10] mfd: rohm PMICs - use platform_device_id to match MFD sub-devices
- [PATCH v12 02/10] dt-bindings: mfd: Document ROHM BD71828 bindings
- [PATCH v12 01/10] dt-bindings: leds: ROHM BD71282 PMIC LED driver
- [PATCH v12 00/10] Support ROHM BD71828 PMIC
- Re: [PATCH v11 06/13] mfd: input: bd71828: Add power-key support
- Re: [PATCH v10 12/13] leds: Add common LED binding parsing support to LED class/core
- Re: [PATCH v11 06/13] mfd: input: bd71828: Add power-key support
- Re: [PATCH v11 03/13] mfd: rohm PMICs - use platform_device_id to match MFD sub-devices
- Re: [PATCH v10 11/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
- Re: [PATCH v10 08/13] regulator: bd718x7: Split driver to common and bd718x7 specific parts
- Re: [PATCH v10 11/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
- [PATCH v11 13/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
- [PATCH v11 12/13] leds: Add common LED binding parsing support to LED class/core
- [PATCH v11 11/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
- [PATCH v11 10/13] rtc: bd70528: add BD71828 support
- [PATCH v11 09/13] mfd: bd70528: Fix hour register mask
- [PATCH v11 08/13] regulator: bd718x7: Split driver to common and bd718x7 specific parts
- [PATCH v11 07/13] clk: bd718x7: Support ROHM BD71828 clk block
- [PATCH v11 06/13] mfd: input: bd71828: Add power-key support
- [PATCH v11 05/13] mfd: bd71828: Support ROHM BD71828 PMIC - core
- [PATCH v11 04/13] mfd: bd718x7: Add compatible for BD71850
- [PATCH v11 03/13] mfd: rohm PMICs - use platform_device_id to match MFD sub-devices
- [PATCH v11 02/13] dt-bindings: mfd: Document ROHM BD71828 bindings
- [PATCH v11 01/13] dt-bindings: leds: ROHM BD71282 PMIC LED driver
- [PATCH v11 00/13] Support ROHM BD71828 PMIC
- Re: [PATCH 08/12] linux-user: Add support for setting alsa timer enhanced read using ioctl
- Re: [PATCH 08/12] linux-user: Add support for setting alsa timer enhanced read using ioctl
- Re: [PATCH 08/12] linux-user: Add support for setting alsa timer enhanced read using ioctl
- From: Aleksandar Markovic
- Re: [PATCH v1 7/8] ASoC: Intel: Switch DMI table match to a test of variable
- From: Pierre-Louis Bossart
- Re: [PATCH] rtc: cmos: Don't enable shared interrupts if using HPET-based IRQ handler
- [PATCH v1 7/8] ASoC: Intel: Switch DMI table match to a test of variable
- Re: [PATCH] rtc: cmos: Don't enable shared interrupts if using HPET-based IRQ handler
- [PATCH v1 4/8] x86/quirks: Convert DMI matching to use a table
- [PATCH v1 3/8] x86/quirks: Add missed include to satisfy static checker
- [PATCH v1 2/8] x86/platform: Rename x86/apple.h -> x86/machine.h
- [PATCH v1 8/8] rtc: cmos: Switch DMI table match to a test of variable
- [PATCH v1 6/8] platform/x86: surface3_wmi: Switch DMI table match to a test of variable
- [PATCH v1 5/8] x86/quirks: Add a DMI quirk for Microsoft Surface 3
- [PATCH v1 1/8] rtc: cmos: Use shared IRQ only for Microsoft Surface 3
- Re: [PATCH] rtc: cmos: Don't enable shared interrupts if using HPET-based IRQ handler
- Re: [PATCH] rtc: cmos: Don't enable shared interrupts if using HPET-based IRQ handler
- Re: [PATCH v10 00/13] Support ROHM BD71828 PMIC
- Re: [PATCH v10 08/13] regulator: bd718x7: Split driver to common and bd718x7 specific parts
- Re: [PATCH v10 00/13] Support ROHM BD71828 PMIC
- Re: [PATCH v10 08/13] regulator: bd718x7: Split driver to common and bd718x7 specific parts
- Re: [PATCH v10 00/13] Support ROHM BD71828 PMIC
- Re: [PATCH v10 08/13] regulator: bd718x7: Split driver to common and bd718x7 specific parts
- Re: [PATCH v10 09/13] mfd: bd70528: Fix hour register mask
- Re: [PATCH v10 11/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
- Re: [PATCH] rtc: cmos: Don't enable shared interrupts if using HPET-based IRQ handler
- From: Guilherme G. Piccoli
- [PATCH v10 13/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
- [PATCH v10 12/13] leds: Add common LED binding parsing support to LED class/core
- [PATCH v10 11/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
- [PATCH v10 10/13] rtc: bd70528: add BD71828 support
- [PATCH v10 09/13] mfd: bd70528: Fix hour register mask
- [PATCH v10 08/13] regulator: bd718x7: Split driver to common and bd718x7 specific parts
- [PATCH v10 02/13] dt-bindings: mfd: Document ROHM BD71828 bindings
- [PATCH v10 00/13] Support ROHM BD71828 PMIC
- [PATCH v10 07/13] clk: bd718x7: Support ROHM BD71828 clk block
- [PATCH v10 01/13] dt-bindings: leds: ROHM BD71282 PMIC LED driver
- [PATCH v10 06/13] mfd: input: bd71828: Add power-key support
- [PATCH v10 05/13] mfd: bd71828: Support ROHM BD71828 PMIC - core
- [PATCH v10 04/13] mfd: bd718x7: Add compatible for BD71850
- [PATCH v10 03/13] mfd: rohm PMICs - use platform_device_id to match MFD sub-devices
- [PATCH AUTOSEL 5.4 120/205] rtc: bd70528: fix module alias to autoload module
- [PATCH AUTOSEL 5.4 152/205] rtc: msm6242: Fix reading of 10-hour digit
- [PATCH AUTOSEL 4.19 127/671] rtc: cmos: ignore bogus century byte
- [PATCH AUTOSEL 4.19 156/671] rtc: ds1672: fix unintended sign extension
- [PATCH AUTOSEL 4.19 161/671] rtc: ds1307: rx8130: Fix alarm handling
- [PATCH AUTOSEL 4.19 164/671] rtc: 88pm80x: fix unintended sign extension
- [PATCH AUTOSEL 4.19 165/671] rtc: pm8xxx: fix unintended sign extension
- [PATCH AUTOSEL 4.19 163/671] rtc: 88pm860x: fix unintended sign extension
- [PATCH AUTOSEL 4.19 277/671] rtc: Fix timestamp value for RTC_TIMESTAMP_BEGIN_1900
- [PATCH AUTOSEL 4.19 278/671] rtc: mt6397: Don't call irq_dispose_mapping.
- [PATCH AUTOSEL 4.19 425/671] rtc: pcf8563: Fix interrupt trigger method
- [PATCH AUTOSEL 4.19 502/671] rtc: rv3029: revert error handling patch to rv3029_eeprom_write()
- [PATCH AUTOSEL 4.19 507/671] rtc: pcf2127: bugfix: read rtc disables watchdog
- [PATCH AUTOSEL 4.14 064/371] rtc: cmos: ignore bogus century byte
- [PATCH AUTOSEL 4.14 082/371] rtc: ds1672: fix unintended sign extension
- [PATCH AUTOSEL 4.14 085/371] rtc: ds1307: rx8130: Fix alarm handling
- [PATCH AUTOSEL 4.14 088/371] rtc: pm8xxx: fix unintended sign extension
- [PATCH AUTOSEL 4.14 086/371] rtc: 88pm860x: fix unintended sign extension
- [PATCH AUTOSEL 4.14 087/371] rtc: 88pm80x: fix unintended sign extension
- [PATCH AUTOSEL 4.14 234/371] rtc: pcf8563: Fix interrupt trigger method
- [PATCH AUTOSEL 4.14 235/371] rtc: pcf8563: Clear event flags and disable interrupts before requesting irq
- [PATCH AUTOSEL 4.14 275/371] rtc: pcf2127: bugfix: read rtc disables watchdog
- [PATCH AUTOSEL 4.9 045/251] rtc: cmos: ignore bogus century byte
- [PATCH AUTOSEL 4.9 061/251] rtc: 88pm80x: fix unintended sign extension
- [PATCH AUTOSEL 4.9 057/251] rtc: ds1672: fix unintended sign extension
- [PATCH AUTOSEL 4.9 157/251] rtc: pcf8563: Clear event flags and disable interrupts before requesting irq
- [PATCH AUTOSEL 4.9 242/251] rtc: msm6242: Fix reading of 10-hour digit
- [PATCH AUTOSEL 4.4 037/174] rtc: ds1672: fix unintended sign extension
- [PATCH AUTOSEL 4.4 039/174] rtc: 88pm80x: fix unintended sign extension
- [PATCH AUTOSEL 4.4 040/174] rtc: pm8xxx: fix unintended sign extension
- [PATCH AUTOSEL 4.4 038/174] rtc: 88pm860x: fix unintended sign extension
- [PATCH AUTOSEL 4.4 035/174] rtc: cmos: ignore bogus century byte
- [PATCH AUTOSEL 4.4 167/174] rtc: msm6242: Fix reading of 10-hour digit
- [PATCH AUTOSEL 4.4 104/174] rtc: pcf8563: Clear event flags and disable interrupts before requesting irq
- [PATCH AUTOSEL 4.9 062/251] rtc: pm8xxx: fix unintended sign extension
- [PATCH AUTOSEL 4.9 060/251] rtc: 88pm860x: fix unintended sign extension
- [PATCH AUTOSEL 4.14 356/371] rtc: msm6242: Fix reading of 10-hour digit
- [PATCH AUTOSEL 4.19 640/671] rtc: brcmstb-waketimer: add missed clk_disable_unprepare
- [PATCH AUTOSEL 4.19 650/671] rtc: msm6242: Fix reading of 10-hour digit
- [PATCH AUTOSEL 4.19 426/671] rtc: pcf8563: Clear event flags and disable interrupts before requesting irq
- [PATCH AUTOSEL 5.4 119/205] rtc: bd70528: Add MODULE ALIAS to autoload module
- [PATCH AUTOSEL 5.4 118/205] rtc: brcmstb-waketimer: add missed clk_disable_unprepare
- Re: [PATCH v4 4/5] ARM: at91/defconfig: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B
- Re: [PATCH v4 5/5] ARM: dts: at91: sam9x60: add device tree for soc and board
- Re: [PATCH v3 5/7] dt-bindings: atmel-usart: add microchip,sam9x60-{usart, dbgu}
- Re: [PATCH v3 1/7] dt-bindings: atmel-tcb: remove wildcard
- Re: [PATCH v3 2/7] dt-bindings: atmel-tcb: add microchip,sam9x60-tcb
- Re: [PATCH 08/12] linux-user: Add support for setting alsa timer enhanced read using ioctl
- Re: [RFC 00/25] arm64: realtek: Add Xnano X5 and implement TM1628/FD628/AiP1618 LED controllers
- Re: [PATCH v4 1/5] dt-bindings: atmel,at91rm9200-rtc: add microchip,sam9x60-rtc
- [PATCH v4 5/5] ARM: dts: at91: sam9x60: add device tree for soc and board
- [PATCH v4 4/5] ARM: at91/defconfig: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B
- [PATCH v4 3/5] dt-bindings: atmel-usart: add microchip,sam9x60-{usart, dbgu}
- [PATCH v4 2/5] dt-bindings: atmel-usart: remove wildcard
- [PATCH v4 1/5] dt-bindings: atmel,at91rm9200-rtc: add microchip,sam9x60-rtc
- [PATCH v4 0/5] add device tree for SAM9X60 SoC and SAM9X60-EK board
- Re: [PATCH v3 2/7] dt-bindings: atmel-tcb: add microchip,sam9x60-tcb
- Re: [PATCH v3 1/7] dt-bindings: atmel-tcb: remove wildcard
- [RESEND PATCH v9 12/12] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
- [RESEND PATCH v9 11/12] leds: Add common LED binding parsing support to LED class/core
- [RESEND PATCH v9 10/12] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
- [RESEND PATCH v9 09/12] rtc: bd70528: add BD71828 support
- [RESEND PATCH v9 08/12] regulator: bd718x7: Split driver to common and bd718x7 specific parts
- [RESEND PATCH v9 07/12] clk: bd718x7: Support ROHM BD71828 clk block
- [RESEND PATCH v9 06/12] mfd: input: bd71828: Add power-key support
- [RESEND PATCH v9 05/12] mfd: bd71828: Support ROHM BD71828 PMIC - core
- [RESEND PATCH v9 04/12] mfd: bd718x7: Add compatible for BD71850
- [RESEND PATCH v9 03/12] mfd: rohm PMICs - use platform_device_id to match MFD sub-devices
- [RESEND PATCH v9 02/12] dt-bindings: mfd: Document ROHM BD71828 bindings
- [RESEND PATCH v9 01/12] dt-bindings: leds: ROHM BD71282 PMIC LED driver
- [RESEND PATCH v9 00/12] Support ROHM BD71828 PMIC
- Re: [PATCH v2 10/17] dt-bindings: atmel-smc: add microchip,sam9x60-smc
- Re: [PATCH v9 02/12] dt-bindings: mfd: Document ROHM BD71828 bindings
- Re: [PATCH v8 08/12] regulator: bd718x7: Split driver to common and bd718x7 specific parts
- Re: [PATCH v9 02/12] dt-bindings: mfd: Document ROHM BD71828 bindings
- Re: [PATCH v8 08/12] regulator: bd718x7: Split driver to common and bd718x7 specific parts
- Re: [PATCH v2 10/17] dt-bindings: atmel-smc: add microchip,sam9x60-smc
- Re: [PATCH v3 2/7] dt-bindings: atmel-tcb: add microchip,sam9x60-tcb
- Re: [PATCH v3 1/7] dt-bindings: atmel-tcb: remove wildcard
- Re: [PATCH v3 4/7] dt-bindings: atmel-usart: remove wildcard
- Re: [PATCH v3 4/7] dt-bindings: atmel-usart: remove wildcard
- Re: [PATCH v2 05/17] dt-bindings: atmel-isi: add microchip,sam9x60-isi
- Re: [PATCH v3 4/7] dt-bindings: atmel-usart: remove wildcard
- Re: [PATCH v3 4/7] dt-bindings: atmel-usart: remove wildcard
- Re: [PATCH v3 4/7] dt-bindings: atmel-usart: remove wildcard
- [PATCH v3 7/7] ARM: dts: at91: sam9x60: add device tree for soc and board
- [PATCH v3 6/7] ARM: at91/defconfig: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B
- [PATCH v3 5/7] dt-bindings: atmel-usart: add microchip,sam9x60-{usart, dbgu}
- [PATCH v3 3/7] dt-bindings: atmel,at91rm9200-rtc: add microchip,sam9x60-rtc
- [PATCH v3 1/7] dt-bindings: atmel-tcb: remove wildcard
- [PATCH v3 2/7] dt-bindings: atmel-tcb: add microchip,sam9x60-tcb
- [PATCH v3 4/7] dt-bindings: atmel-usart: remove wildcard
- [PATCH v3 0/7] add device tree for SAM9X60 SoC and SAM9X60-EK board
- Re: [PATCH] rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
- Re: [PATCH v2 15/17] dt-bindings: arm: add sam9x60-ek board
- Re: [PATCH v2 11/17] dt-bindings: atmel-gpbr: add microchip,sam9x60-gpbr
- Re: [PATCH v2 10/17] dt-bindings: atmel-smc: add microchip,sam9x60-smc
- Re: [PATCH v2 09/17] dt-bindings: atmel-sysreg: add microchip,sam9x60-ddramc
- Re: [PATCH v2 08/17] dt-bindings: atmel-nand: add microchip,sam9x60-pmecc
- Re: [PATCH v2 07/17] dt-bindings: atmel-matrix: add microchip,sam9x60-matrix
- Re: [PATCH v2 06/17] dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc
- Re: [PATCH v2 05/17] dt-bindings: atmel-isi: add microchip,sam9x60-isi
- Re: [PATCH v2 03/17] dt-bindings: atmel-can: add microchip,sam9x60-can
- Re: [PATCH v2 02/17] dt-bindings: at_xdmac: add microchip,sam9x60-dma
- Re: [PATCH v2 01/17] dt-bindings: at_xdmac: remove wildcard
- Re: [PATCH v2 12/17] dt-bindings: atmel,at91rm9200-rtc: add microchip,sam9x60-rtc
- Re: [PATCH v2 15/17] dt-bindings: arm: add sam9x60-ek board
- Re: [PATCH v2 13/17] dt-bindings: atmel-usart: remove wildcard
- Re: [PATCH v2 10/17] dt-bindings: atmel-smc: add microchip,sam9x60-smc
- Re: [PATCH v2 11/17] dt-bindings: atmel-gpbr: add microchip,sam9x60-gpbr
- Re: [PATCH v2 08/17] dt-bindings: atmel-nand: add microchip,sam9x60-pmecc
- Re: [PATCH v2 07/17] dt-bindings: atmel-matrix: add microchip,sam9x60-matrix
- Re: [PATCH v2 09/17] dt-bindings: atmel-sysreg: add microchip,sam9x60-ddramc
- Re: [PATCH v2 06/17] dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc
- Re: [PATCH v2 04/17] dt-bindings: atmel-tcb: add microchip,sam9x60-tcb
- Re: [PATCH v2 02/17] dt-bindings: at_xdmac: add microchip,sam9x60-dma
- Re: [PATCH v2 01/17] dt-bindings: at_xdmac: remove wildcard
- Re: [PATCH v2 05/17] dt-bindings: atmel-isi: add microchip,sam9x60-isi
- Re: [PATCH v2 03/17] dt-bindings: atmel-can: add microchip,sam9x60-can
- Re: [PATCH] cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
- From: Enric Balletbo i Serra
- Re: [PATCH v8 08/12] regulator: bd718x7: Split driver to common and bd718x7 specific parts
- Re: [PATCH v8 08/12] regulator: bd718x7: Split driver to common and bd718x7 specific parts
- Re: [PATCH v8 08/12] regulator: bd718x7: Split driver to common and bd718x7 specific parts
- Re: [PATCH] rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
- Re: [PATCH] rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
- Re: [PATCH] rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
- Re: [PATCH] rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
- Re: [PATCH] rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
- Re: [PATCH] rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
- Re: [PATCH] rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
- [PATCH] rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
- Re: rtc rtc0: Timeout trying to get valid LPSRT Counter read
- Re: [PATCH v2 06/17] dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc
- [PATCH v9 12/12] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
- [PATCH v9 11/12] leds: Add common LED binding parsing support to LED class/core
- [PATCH v9 10/12] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
- [PATCH v9 09/12] rtc: bd70528: add BD71828 support
- [PATCH v9 08/12] regulator: bd718x7: Split driver to common and bd718x7 specific parts
- [PATCH v9 07/12] clk: bd718x7: Support ROHM BD71828 clk block
- [PATCH v9 06/12] mfd: input: bd71828: Add power-key support
- [PATCH v9 05/12] mfd: bd71828: Support ROHM BD71828 PMIC - core
- [PATCH v9 04/12] mfd: bd718x7: Add compatible for BD71850
- [PATCH v9 03/12] mfd: rohm PMICs - use platform_device_id to match MFD sub-devices
- [PATCH v9 02/12] dt-bindings: mfd: Document ROHM BD71828 bindings
- [PATCH v9 01/12] dt-bindings: leds: ROHM BD71282 PMIC LED driver
- [PATCH v9 00/12] Support ROHM BD71828 PMIC
- Re: [PATCH v12 0/3] Use MFD framework for SGI IOC3 drivers
- Re: [PATCH 16/16] ARM: dts: at91: sam9x60: add device tree for soc and board
- [PATCH v2 12/17] dt-bindings: atmel,at91rm9200-rtc: add microchip,sam9x60-rtc
- [PATCH v2 17/17] ARM: dts: at91: sam9x60: add device tree for soc and board
- [PATCH v2 14/17] dt-bindings: atmel-usart: add microchip,sam9x60-{usart, dbgu}
- [PATCH v2 15/17] dt-bindings: arm: add sam9x60-ek board
- [PATCH v2 16/17] ARM: at91/defconfig: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B
- [PATCH v2 13/17] dt-bindings: atmel-usart: remove wildcard
- [PATCH v2 11/17] dt-bindings: atmel-gpbr: add microchip,sam9x60-gpbr
- [PATCH v2 10/17] dt-bindings: atmel-smc: add microchip,sam9x60-smc
- [PATCH v2 09/17] dt-bindings: atmel-sysreg: add microchip,sam9x60-ddramc
- [PATCH v2 08/17] dt-bindings: atmel-nand: add microchip,sam9x60-pmecc
- [PATCH v2 07/17] dt-bindings: atmel-matrix: add microchip,sam9x60-matrix
- [PATCH v2 06/17] dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc
- [PATCH v2 05/17] dt-bindings: atmel-isi: add microchip,sam9x60-isi
- [PATCH v2 04/17] dt-bindings: atmel-tcb: add microchip,sam9x60-tcb
- [PATCH v2 03/17] dt-bindings: atmel-can: add microchip,sam9x60-can
- [PATCH v2 02/17] dt-bindings: at_xdmac: add microchip,sam9x60-dma
- [PATCH v2 01/17] dt-bindings: at_xdmac: remove wildcard
- [PATCH v2 00/17] add device tree for SAM9X60 SoC and SAM9X60-EK board
- Re: [PATCH 11/16] dt-bindings: atmel,at91rm9200-rtc: add microchip,sam9x60-rtc
- Re: [PATCH 03/16] dt-bindings: atmel-tcb: add microchip,<chip>-tcb
- Re: [PATCH 13/16] dt-bindings: atmel-usart: add microchip,<chip>-usart
- Re: [PATCH 11/16] dt-bindings: atmel,at91rm9200-rtc: add microchip,sam9x60-rtc
- Re: [PATCH 03/16] dt-bindings: atmel-tcb: add microchip,<chip>-tcb
- Re: [PATCH 03/16] dt-bindings: atmel-tcb: add microchip,<chip>-tcb
- Re: [PATCH v5 0/5] Add rtc support for rn5t618 mfd
- Applied "dt-bindings: spi_atmel: add microchip,sam9x60-spi" to the spi tree
- Re: [PATCH 07/16] dt-bindings: atmel-nand: add microchip,sam9x60-pmecc
- Re: [PATCH] rtc: cmos: Don't enable shared interrupts if using HPET-based IRQ handler
- From: Guilherme G. Piccoli
- Re: [PATCH 04/10] rtc: at91rm9200: use of_platform_populate as return value
- Re: [PATCH 04/10] rtc: at91rm9200: use of_platform_populate as return value
- [PATCH v12 0/3] Use MFD framework for SGI IOC3 drivers
- From: Thomas Bogendoerfer
- [PATCH v12 2/3] MIPS: SGI-IP27: fix readb/writeb addressing
- From: Thomas Bogendoerfer
- Re: [PATCH] rtc: cmos: Don't enable shared interrupts if using HPET-based IRQ handler
- Re: [PATCH] rtc: cmos: Don't enable shared interrupts if using HPET-based IRQ handler
- [PATCH 16/16] ARM: dts: at91: sam9x60: add device tree for soc and board
- [PATCH 14/16] dt-bindings: arm: add sam9x60-ek board
- [PATCH 09/16] dt-bindings: atmel-smc: add microchip,sam9x60-smc
- [PATCH 07/16] dt-bindings: atmel-nand: add microchip,sam9x60-pmecc
- [PATCH 15/16] ARM: at91/defconfig: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B
- [PATCH 13/16] dt-bindings: atmel-usart: add microchip,<chip>-usart
- [PATCH 12/16] dt-bindings: spi_atmel: add microchip,sam9x60-spi
- [PATCH 11/16] dt-bindings: atmel,at91rm9200-rtc: add microchip,sam9x60-rtc
- [PATCH 08/16] dt-bindings: atmel-sysreg: add microchip,sam9x60-ddramc
- [PATCH 10/16] dt-bindings: atmel-gpbr: add microchip,sam9x60-gpbr
- [PATCH 06/16] dt-bindings: atmel-matrix: add microchip,sam9x60-matrix
- [PATCH 05/16] dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc
- [PATCH 04/16] dt-bindings: atmel-isi: add microchip,sam9x60-isi
- [PATCH 03/16] dt-bindings: atmel-tcb: add microchip,<chip>-tcb
- [PATCH 01/16] dt-bindings: at_xdmac: add entry for microchip compatibles
- [PATCH 02/16] dt-bindings: atmel-can: add microchip,sam9x60-can
- [PATCH 00/16] add device tree for SAM9X60 SoC and SAM9X60-EK board
- Re: [PATCH v8 08/12] regulator: bd718x7: Split driver to common and bd718x7 specific parts
- Re: [PATCH v8 09/12] rtc: bd70528: add BD71828 support
- Re: [PATCH v8 09/12] rtc: bd70528: add BD71828 support
- Re: [PATCH v8 08/12] regulator: bd718x7: Split driver to common and bd718x7 specific parts
- Re: [PATCH v8 04/12] mfd: bd718x7: Add compatible for BD71850
- Re: [GIT PULL] RTC fixes for 5.5
- Re: [PATCH] rtc: cmos: Revert "rtc: Fix the AltCentury value on AMD/Hygon platform"
- Re: [PATCH] cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
- [PATCH v1] rtc: tps6586x: Use IRQ_NOAUTOEN flag
- [GIT PULL] RTC fixes for 5.5
- [PATCH] rtc: pcf8523: fix ptr_ret.cocci warnings
- Re: [bugreport] "hwclock -w" reset time instead of setting the right time
- Re: [bugreport] "hwclock -w" reset time instead of setting the right time
- Re: [bugreport] "hwclock -w" reset time instead of setting the right time
- Re: [bugreport] "hwclock -w" reset time instead of setting the right time
- [PATCH] rtc: cmos: Revert "rtc: Fix the AltCentury value on AMD/Hygon platform"
- Re: [bugreport] "hwclock -w" reset time instead of setting the right time
- [PATCH] rtc: cmos: Don't enable shared interrupts if using HPET-based IRQ handler
- From: Guilherme G. Piccoli
- Re: [bugreport] "hwclock -w" reset time instead of setting the right time
- Re: [bugreport] "hwclock -w" reset time instead of setting the right time
- Re: [bugreport] "hwclock -w" reset time instead of setting the right time
- Re: [bugreport] "hwclock -w" reset time instead of setting the right time
- Re: [bugreport] "hwclock -w" reset time instead of setting the right time
- Re: [bugreport] "hwclock -w" reset time instead of setting the right time
- Re: [bugreport] "hwclock -w" reset time instead of setting the right time
- rtc rtc0: Timeout trying to get valid LPSRT Counter read
- [PATCH v8 12/12] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
- [PATCH v8 11/12] leds: Add common LED binding parsing support to LED class/core
- [PATCH v8 10/12] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
- [PATCH v8 09/12] rtc: bd70528: add BD71828 support
- [PATCH v8 08/12] regulator: bd718x7: Split driver to common and bd718x7 specific parts
- [PATCH v8 07/12] clk: bd718x7: Support ROHM BD71828 clk block
- [PATCH v8 06/12] mfd: input: bd71828: Add power-key support
- [PATCH v8 05/12] mfd: bd71828: Support ROHM BD71828 PMIC - core
- [PATCH v8 04/12] mfd: bd718x7: Add compatible for BD71850
- [PATCH v8 03/12] mfd: rohm PMICs - use platform_device_id to match MFD sub-devices
- [PATCH v8 02/12] dt-bindings: mfd: Document ROHM BD71828 bindings
- [PATCH v8 01/12] dt-bindings: leds: ROHM BD71282 PMIC LED driver
- [PATCH v8 00/12] Support ROHM BD71828 PMIC
- Re: [PATCH v7 11/12] leds: Add common LED binding parsing support to LED class/core
- [PATCH 9/9] ARM: dts: at91: sama5d4: use correct rtc compatible
- [PATCH 8/9] ARM: dts: at91: sama5d2: use correct rtc compatible
- [PATCH 7/9] rtc: at91rm9200: add correction support
- [PATCH 6/9] rtc: at91rm9200: use FIELD_PREP/FIELD_GET
- [PATCH 5/9] rtc: at91rm9200: avoid time readout in at91_rtc_setalarm
- [PATCH 4/9] rtc: at91rm9200: move register definitions to C file
- [PATCH 3/9] rtc: at91rm9200: add sama5d4 and sama5d2 compatibles
- [PATCH 2/9] dt-bindings: rtc: at91rm9200: convert bindings to json-schema
- [PATCH 1/9] rtc: at91rm9200: remove procfs information
- Re: [PATCH] rtc: class: support hctosys from modular RTC drivers
- Re: [PATCH v7 11/12] leds: Add common LED binding parsing support to LED class/core
- Re: [PATCH v7 11/12] leds: Add common LED binding parsing support to LED class/core
- Re: [PATCH v7 12/12] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
- Re: [PATCH v7 07/12] clk: bd718x7: Support ROHM BD71828 clk block
- Re: [PATCH 08/10] iio: adc: at91-sama5d2_adc: implement RTC triggering
- Re: [PATCH 07/10] iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
- Re: [PATCH 06/10] iio: adc: at91-sama5d2_adc: handle unfinished conversions
- Re: [PATCH 05/10] iio: trigger: at91-rtc-trigger: introduce at91 rtc adc trigger driver
- Re: [PATCH 03/10] dt-bindings: iio: trigger: at91-rtc-trigger: add bindings
- Re: [PATCH 02/10] dt-bindings: iio: adc: at91-sama5d2: add rtc-trigger optional property
- Re: [PATCH 01/10] iio: adc: at91-sama5d2_adc: update for other trigger usage
- Re: [PATCH 04/10] rtc: at91rm9200: use of_platform_populate as return value
- Re: [PATCH v7 11/12] leds: Add common LED binding parsing support to LED class/core
- Re: [PATCH] rtc: rx8010: Remove struct i2c_client from struct rx8010_data
- Re: [PATCH] rtc: moxart: Convert to SPDX identifier
- Re: [PATCH] rtc: pcf8563: Use BIT
- Re: [PATCH] rtc: ds1343: Remove unused struct spi_device in struct ds1343_priv
- Re: [PATCH] rtc: rx8025: Remove struct i2c_client from struct rx8025_data
- Re: [PATCH] rtc: rx8010: Fix return code for rx8010_probe
- Re: [PATCH v2 2/2] rtc: hym8563: Read the valid flag directly instead of caching it
- Re: [PATCH v2 1/2] rtc: hym8563: Return -EINVAL if the time is known to be invalid
- [PATCH v2] rtc: rv3029: annotate init and exit functions
- Re: [PATCH] rtc: omap: Remove unneeded semicolon
- Re: [PATCH] rtc: asm9260: add the missed check for devm_clk_get
- [PATCH v2] rtc: rv3029: remove useless error messages
- Re: [RFC 00/25] arm64: realtek: Add Xnano X5 and implement TM1628/FD628/AiP1618 LED controllers
- Re: [PATCH v7 12/12] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
- Re: [PATCH v7 11/12] leds: Add common LED binding parsing support to LED class/core
- Re: [PATCH v7 01/12] dt-bindings: leds: ROHM BD71282 PMIC LED driver
- Re: [RFC 00/25] arm64: realtek: Add Xnano X5 and implement TM1628/FD628/AiP1618 LED controllers
- [PATCH v5 0/5] Add rtc support for rn5t618 mfd
- [PATCH v5 1/5] dt-bindings: mfd: rn5t618: Document optional property interrupts
- [PATCH v5 5/5] rtc: rc5t619: add ricoh rc5t619 RTC driver
- [PATCH v5 3/5] mfd: rn5t618: add RTC related registers
- [PATCH v5 2/5] mfd: rn5t618: add IRQ support
- [PATCH v5 4/5] mfd: rn5t618: add more subdevices
- Re: [PATCH v7 02/12] dt-bindings: mfd: Document ROHM BD71828 bindings
- Re: [PATCH v7 02/12] dt-bindings: mfd: Document ROHM BD71828 bindings
- [PATCH][next] rtc: rv3029: remove redundant return statement
- Re: [PATCH v7 02/12] dt-bindings: mfd: Document ROHM BD71828 bindings
- Re: [PATCH 04/10] rtc: at91rm9200: use of_platform_populate as return value
- Re: [PATCH v7 02/12] dt-bindings: mfd: Document ROHM BD71828 bindings
- [PATCH v7 12/12] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
- [PATCH v7 11/12] leds: Add common LED binding parsing support to LED class/core
- [PATCH v7 10/12] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
- [PATCH v7 09/12] rtc: bd70528: add BD71828 support
- [PATCH v7 08/12] regulator: bd718x7: Split driver to common and bd718x7 specific parts
- [PATCH v7 07/12] clk: bd718x7: Support ROHM BD71828 clk block
- [PATCH v7 06/12] mfd: input: bd71828: Add power-key support
- [PATCH v7 05/12] mfd: bd71828: Support ROHM BD71828 PMIC - core
- [PATCH v7 04/12] mfd: bd718x7: Add compatible for BD71850
- [PATCH v7 03/12] mfd: rohm PMICs - use platform_device_id to match MFD sub-devices
- [PATCH v7 02/12] dt-bindings: mfd: Document ROHM BD71828 bindings
- [PATCH v7 01/12] dt-bindings: leds: ROHM BD71282 PMIC LED driver
- [PATCH v7 00/12] Support ROHM BD71828 PMIC
- Re: [PATCH v11 net-next 2/2] mfd: ioc3: Add driver for SGI IOC3 chip
- From: Thomas Bogendoerfer
- Re: [PATCH 04/10] rtc: at91rm9200: use of_platform_populate as return value
- Re: [PATCH v11 net-next 2/2] mfd: ioc3: Add driver for SGI IOC3 chip
- Re: [PATCH] cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
- Re: [PATCH] rtc: pcf8563: Replace i2c functions for smbus ones
- Re: [PATCH v4 1/5] dt-bindings: mfd: rn5t618: Document optional property interrupts
- Re: [PATCH v6 03/15] dt-bindings: mfd: Document ROHM BD71828 bindings
- Re: [PATCH v6 02/15] dt-bindings: leds: ROHM BD71282 PMIC LED driver
- Re: [PATCH v6 08/15] regulator: bd718x7: Split driver to common and bd718x7 specific parts
- Re: Applied "regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators" to the regulator tree
- Re: [PATCH 04/10] rtc: at91rm9200: use of_platform_populate as return value
- Re: [PATCH 04/10] rtc: at91rm9200: use of_platform_populate as return value
- Re: [PATCH 04/10] rtc: at91rm9200: use of_platform_populate as return value
- [PATCH 08/10] iio: adc: at91-sama5d2_adc: implement RTC triggering
- [PATCH 09/10] ARM: dts: at91: sama5d2: add rtc_adc_trigger node
- [PATCH 10/10] ARM: dts: at91: sama5d2_xplained: enable rtc_adc_trigger
- [PATCH 06/10] iio: adc: at91-sama5d2_adc: handle unfinished conversions
- [PATCH 04/10] rtc: at91rm9200: use of_platform_populate as return value
- [PATCH 03/10] dt-bindings: iio: trigger: at91-rtc-trigger: add bindings
- [PATCH 05/10] iio: trigger: at91-rtc-trigger: introduce at91 rtc adc trigger driver
- [PATCH 07/10] iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
- [PATCH 01/10] iio: adc: at91-sama5d2_adc: update for other trigger usage
- [PATCH 02/10] dt-bindings: iio: adc: at91-sama5d2: add rtc-trigger optional property
- [PATCH 00/10] Enhancements to at91-sama5d2_adc and rtc trigger
- Re: Applied "regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators" to the regulator tree
- Re: Applied "regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators" to the regulator tree
- Re: Applied "regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators" to the regulator tree
- Re: [PATCH v6 08/15] regulator: bd718x7: Split driver to common and bd718x7 specific parts
- Re: [PATCH] rtc: pcf8563: Replace i2c functions for smbus ones
- [PATCH] rtc: moxart: Convert to SPDX identifier
- [PATCH] rtc: pcf8563: Replace i2c functions for smbus ones
- [PATCH] rtc: pcf8563: Use BIT
- [PATCH] rtc: ds1343: Remove unused struct spi_device in struct ds1343_priv
- [PATCH] rtc: rx8025: Remove struct i2c_client from struct rx8025_data
- Re: Applied "regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators" to the regulator tree
- Re: [PATCH v2] dt-bindings: rtc: Convert stm32 rtc bindings to json-schema
- Re: [PATCH v4 4/5] mfd: rn5t618: add more subdevices
- Re: [PATCH v6 05/15] mfd: bd71828: Support ROHM BD71828 PMIC - core
- Re: [PATCH v6 05/15] mfd: bd71828: Support ROHM BD71828 PMIC - core
- From: gregkh@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH v6 05/15] mfd: bd71828: Support ROHM BD71828 PMIC - core
- Applied "dt-bindings: regulator: Document ROHM BD71282 regulator bindings" to the regulator tree
- Applied "regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators" to the regulator tree
- [PATCH] rtc: rx8010: Fix return code for rx8010_probe
- [PATCH] rtc: rx8010: Remove struct i2c_client from struct rx8010_data
- Re: [PATCH v4 4/5] mfd: rn5t618: add more subdevices
- Re: [PATCH] rtc: pcf8523: fix ptr_ret.cocci warnings
- Re: [PATCH v6 05/15] mfd: bd71828: Support ROHM BD71828 PMIC - core
- Re: [PATCH v6 09/15] regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators
- Re: [PATCH v11 net-next 2/2] mfd: ioc3: Add driver for SGI IOC3 chip
- Re: [PATCH v4 4/5] mfd: rn5t618: add more subdevices
- Re: [PATCH v6 09/15] regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators
- Re: [PATCH] rtc: sun6i: Add support for RTC clocks on R40
- [PATCH] rtc: pcf8523: fix ptr_ret.cocci warnings
- Re: [PATCH v6 07/15] clk: bd718x7: Support ROHM BD71828 clk block
- Re: [PATCH v6 05/15] mfd: bd71828: Support ROHM BD71828 PMIC - core
- Re: [PATCH v6 04/15] mfd: rohm PMICs - use platform_device_id to match MFD sub-devices
- Re: [PATCH v4 2/5] mfd: rn5t618: add IRQ support
- Re: [PATCH v4 4/5] mfd: rn5t618: add more subdevices
- Re: [PATCH v11 net-next 2/2] mfd: ioc3: Add driver for SGI IOC3 chip
- From: Thomas Bogendoerfer
- Re: [PATCH v4 4/5] mfd: rn5t618: add more subdevices
- Re: [PATCH] cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
- From: Enric Balletbo i Serra
- Re: [PATCH v4 3/5] mfd: rn5t618: add RTC related registers
- Re: [PATCH v4 1/5] dt-bindings: mfd: rn5t618: Document optional property interrupts
- Re: [PATCH v4 2/5] mfd: rn5t618: add IRQ support
- Re: [PATCH v7 6/6] rtc: Add support for the MediaTek MT6358 RTC
- Re: [PATCH v7 1/6] mfd: mt6397: modify suspend/resume behavior
- Re: [PATCH v7 3/6] mfd: Add support for the MediaTek MT6358 PMIC
- Re: [PATCH v6 09/15] regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators
- Re: [PATCH v6 10/15] gpio: devres: Add devm_gpiod_get_parent_array
- Re: [PATCH V2] rtc: ds1307: Enable battery backup on RX8130
- Re: [PATCH v6 10/15] gpio: devres: Add devm_gpiod_get_parent_array
- Re: [PATCH v6 13/15] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
- Re: [PATCH v6 11/15] docs: driver-model: Add missing managed GPIO array get functions
- Re: [PATCH v6 10/15] gpio: devres: Add devm_gpiod_get_parent_array
- [PATCH] rtc: omap: Remove unneeded semicolon
- Re: [PATCH v11 net-next 2/2] mfd: ioc3: Add driver for SGI IOC3 chip
- [PATCH 01/16] rtc: rv3029: use proper name for the driver
- [PATCH 10/16] rtc: rv3029: add RTC_VL_READ and RTC_VL_CLEAR support
- [PATCH 07/16] rtc: rv3029: simplify rv3029_alarm_irq_enable
- [PATCH 06/16] rtc: rv3029: get rid of rv3029_get_sr
- [PATCH 08/16] rtc: rv3029: simplify rv3029_set_alarm
- [PATCH 12/16] rtc: rv3029: convert to devm_rtc_allocate_device
- [PATCH 13/16] rtc: rv3029: let the core handle rtc range
- [PATCH 09/16] rtc: rv3029: drop rv3029_read_regs and rv3029_write_regs
- [PATCH 15/16] rtc: rv3029: annotate init and exit functions
- [PATCH 11/16] rtc: rv3029: correctly handle PON and VLOW2
- [PATCH 14/16] rtc: rv3029: remove useless error messages
- [PATCH 16/16] rtc: rv3029: add nvram support
- [PATCH 05/16] rtc: rv3029: avoid reading the status register uselessly
- [PATCH 02/16] rtc: rv3029: let regmap validate the register ranges
- [PATCH 03/16] rtc: rv3029: remove open coded regmap_update_bits
- [PATCH 04/16] rtc: rv3029: remove race condition when update STATUS
- [PATCH 00/16] rtc: rv3029: cleanup and features
- [PATCH 03/17] rtc: abx80x: return meaningful value for RTC_VL_READ
- [PATCH 01/17] rtc: define RTC_VL_READ values
- [PATCH 06/17] rtc: pcf8563: remove RTC_VL_CLR handling
- [PATCH 02/17] rtc: Document RTC_VL_READ and RTC_VL_CLR ioctls
- [PATCH 05/17] rtc: pcf8523: return meaningful value for RTC_VL_READ
- [PATCH 04/17] rtc: pcf2127: return meaningful value for RTC_VL_READ
- [PATCH 07/17] rtc: pcf8563: remove conditional compilation
- [PATCH 09/17] rtc: pcf8563: return meaningful value for RTC_VL_READ
- [PATCH 08/17] rtc: pcf8563: stop caching voltage_low
- [PATCH 10/17] rtc: pcf85063: remove RTC_VL_CLR handling
- [PATCH 11/17] rtc: pcf85063: return meaningful value for RTC_VL_READ
- [PATCH 15/17] rtc: rv8803: return meaningful value for RTC_VL_READ
- [PATCH 13/17] rtc: rv3028: return meaningful value for RTC_VL_READ
- [PATCH 14/17] rtc: rv8803: avoid clearing RV8803_FLAG_V2F in RTC_VL_CLR
- [PATCH 16/17] rtc: rx8010: remove RTC_VL_CLR handling
- [PATCH 12/17] rtc: rv3028: remove RTC_VL_CLR handling
- [PATCH 17/17] rtc: rx8010: return meaningful value for RTC_VL_READ
- [PATCH 00/17] rtc: Unify RTC_VL_READ meaning
- [PATCH v2] dt-bindings: rtc: Convert stm32 rtc bindings to json-schema
- [PATCH] rtc: asm9260: add the missed check for devm_clk_get
- Re: [PATCH] dt-bindings: rtc: Convert stm32 rtc bindings to json-schema
- Re: [RFC 00/25] arm64: realtek: Add Xnano X5 and implement TM1628/FD628/AiP1618 LED controllers
- Re: [RFC 00/25] arm64: realtek: Add Xnano X5 and implement TM1628/FD628/AiP1618 LED controllers
- [PATCH v11 net-next 1/2] MIPS: SGI-IP27: fix readb/writeb addressing
- From: Thomas Bogendoerfer
- [PATCH v11 net-next 2/2] mfd: ioc3: Add driver for SGI IOC3 chip
- From: Thomas Bogendoerfer
- [PATCH v11 net-next 0/2] Use MFD framework for SGI IOC3 drivers
- From: Thomas Bogendoerfer
- [PATCH] rtc: rv3029: drop deprecated compatbiles
- Re: [RFC 00/25] arm64: realtek: Add Xnano X5 and implement TM1628/FD628/AiP1618 LED controllers
- [PATCH v2 1/2] rtc: hym8563: Return -EINVAL if the time is known to be invalid
- [PATCH v2 2/2] rtc: hym8563: Read the valid flag directly instead of caching it
- Re: [RFC 00/25] arm64: realtek: Add Xnano X5 and implement TM1628/FD628/AiP1618 LED controllers
- [PATCH] rtc: zynqmp: Clear alarm interrupt status before interrupt enable
- Re: [PATCH 1/2] rtc: hym8563: Read the valid flag directly instead of caching it
- [PATCH 2/2] rtc: hym8563: Return -EINVAL if the time is known to be invalid
- [PATCH 1/2] rtc: hym8563: Read the valid flag directly instead of caching it
- [RFC 00/25] arm64: realtek: Add Xnano X5 and implement TM1628/FD628/AiP1618 LED controllers
- [PATCH v4 0/5] Add rtc support for rn5t618 mfd
- [PATCH v4 2/5] mfd: rn5t618: add IRQ support
- [PATCH v4 1/5] dt-bindings: mfd: rn5t618: Document optional property interrupts
- [PATCH v4 4/5] mfd: rn5t618: add more subdevices
- [PATCH v4 3/5] mfd: rn5t618: add RTC related registers
- [PATCH v4 5/5] rtc: rc5t619: add ricoh rc5t619 RTC driver
- Re: [PATCH v3 6/6] rtc: rtc-rc5t619: add ricoh rc5t619 RTC driver
- Re: [PATCH v3 6/6] rtc: rtc-rc5t619: add ricoh rc5t619 RTC driver
- Re: [PATCH] rtc: pcf2127: default power management mode
- Re: [PATCH v7 6/6] rtc: Add support for the MediaTek MT6358 RTC
- Re: [PATCH v7 5/6] rtc: mt6397: fix alarm register overwrite
- Re: [PATCH v6 12/15] rtc: bd70528 add BD71828 support
- Re: [PATCH v3 3/6] mfd: rn5t618: add irq support
- Re: [PATCH v6 12/15] rtc: bd70528 add BD71828 support
- [PATCH v6 15/15] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
- [PATCH v6 14/15] leds: Add common LED binding parsing support to LED class/core
- [PATCH v6 13/15] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
- [PATCH v6 12/15] rtc: bd70528 add BD71828 support
- [PATCH v6 11/15] docs: driver-model: Add missing managed GPIO array get functions
- [PATCH v6 10/15] gpio: devres: Add devm_gpiod_get_parent_array
- [PATCH v6 09/15] regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators
- [PATCH v6 08/15] regulator: bd718x7: Split driver to common and bd718x7 specific parts
- [PATCH v7 2/6] dt-bindings: mfd: Add compatible for the MediaTek MT6358 PMIC
- [PATCH v6 07/15] clk: bd718x7: Support ROHM BD71828 clk block
- [PATCH v7 3/6] mfd: Add support for the MediaTek MT6358 PMIC
- [PATCH v7 1/6] mfd: mt6397: modify suspend/resume behavior
- [PATCH v7 4/6] arm64: dts: mt6358: add PMIC MT6358 related nodes
- [PATCH v7 5/6] rtc: mt6397: fix alarm register overwrite
- [PATCH v7 6/6] rtc: Add support for the MediaTek MT6358 RTC
- [PATCH v7 0/6] Add Support for MediaTek PMIC MT6358
- [PATCH v6 06/15] mfd: input: bd71828: Add power-key support
- [PATCH v6 05/15] mfd: bd71828: Support ROHM BD71828 PMIC - core
- [PATCH v6 04/15] mfd: rohm PMICs - use platform_device_id to match MFD sub-devices
- [PATCH v6 03/15] dt-bindings: mfd: Document ROHM BD71828 bindings
- [PATCH v6 02/15] dt-bindings: leds: ROHM BD71282 PMIC LED driver
- [PATCH v6 01/15] dt-bindings: regulator: Document ROHM BD71282 regulator bindings
- [PATCH v6 00/15] Support ROHM BD71828 PMIC
- Re: [PATCH v3 3/6] mfd: rn5t618: add irq support
- Re: [PATCH v3 2/6] mfd: rn5t618: prepare for irq handling
- Re: [PATCH v6 5/6] rtc: mt6397: fix alarm register overwrite
- Re: [PATCH v3 2/6] mfd: rn5t618: prepare for irq handling
- Re: [PATCH v3 3/6] mfd: rn5t618: add irq support
- Re: [PATCH] rtc: ds1343: Do not hardcode SPI mode flags
- Re: [PATCH v6 6/6] rtc: Add support for the MediaTek MT6358 RTC
- Re: [PATCH v6 5/6] rtc: mt6397: fix alarm register overwrite
- Re: [v5,1/2] dt-bindings: rtc: pcf85263/pcf85363: add some properties
- Re: [PATCH 1/2] rtc: zynqmp: re-use rtc_time64_to_tm operation
- Re: [PATCH -next] rtc: mt6397: drop free_irq of devm_ allocated irq
- [PATCH] mailmap: Update email address for Alexandre Belloni
- Re: [PATCH] rtc: sun6i: Add support for RTC clocks on R40
- Re: [PATCH] rtc: stm32: add missed clk_disable_unprepare in error path of resume
- Re: [PATCH v5 13/16] rtc: bd70528 add BD71828 support
- Re: [PATCH v5 01/16] dt-bindings: regulator: Document ROHM BD71282 regulator bindings
- Re: [PATCH v5 01/16] dt-bindings: regulator: Document ROHM BD71282 regulator bindings
- Re: [PATCH v5 01/16] dt-bindings: regulator: Document ROHM BD71282 regulator bindings
- Re: [PATCH v5 01/16] dt-bindings: regulator: Document ROHM BD71282 regulator bindings
- Re: [PATCH v5 01/16] dt-bindings: regulator: Document ROHM BD71282 regulator bindings
- Re: [PATCH v5 01/16] dt-bindings: regulator: Document ROHM BD71282 regulator bindings
- Re: [PATCH v3 3/6] mfd: rn5t618: add irq support
- Re: [PATCH v3 2/6] mfd: rn5t618: prepare for irq handling
- Re: [PATCH v3 1/6] dt-bindings: mfd: rn5t618: Document optional property interrupts
- Re: [PATCH] rtc: sun6i: Add support for RTC clocks on R40
- Re: [PATCH] cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
- [PATCH v6 0/6] Add Support for MediaTek PMIC MT6358
- [PATCH v6 6/6] rtc: Add support for the MediaTek MT6358 RTC
- [PATCH v6 5/6] rtc: mt6397: fix alarm register overwrite
- [PATCH v6 3/6] mfd: Add support for the MediaTek MT6358 PMIC
- [PATCH v6 2/6] dt-bindings: mfd: Add compatible for the MediaTek MT6358 PMIC
- [PATCH v6 1/6] mfd: mt6397: modify suspend/resume behavior
- [PATCH v6 4/6] arm64: dts: mt6358: add PMIC MT6358 related nodes
- Re: [PATCH v5 06/10] mfd: Add support for the MediaTek MT6358 PMIC
- Re: [PATCH] rtc: stm32: add missed clk_disable_unprepare in error path of resume
- [PATCH] rtc: stm32: add missed clk_disable_unprepare in error path of resume
- [PATCH] rtc: sun6i: Add support for RTC clocks on R40
- [PATCH] rtc: ds1343: Do not hardcode SPI mode flags
- Re: [PATCH v5 01/16] dt-bindings: regulator: Document ROHM BD71282 regulator bindings
- Re: [PATCH v5 01/16] dt-bindings: regulator: Document ROHM BD71282 regulator bindings
- Re: [PATCH v5 01/16] dt-bindings: regulator: Document ROHM BD71282 regulator bindings
- Re: [PATCH] cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
- Re: [PATCH v2 -next] rtc: mt6397: drop free_irq of devm_xx allocated irq
- Re: [PATCH v2 -next] rtc: mt6397: drop free_irq of devm_xx allocated irq
- Re: [PATCH] cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
- [PATCH v2 -next] rtc: mt6397: drop free_irq of devm_xx allocated irq
- Re: [PATCH -next] rtc: mt6397: drop free_irq of devm_xx allocated irq
- [PATCH -next] rtc: mt6397: drop free_irq of devm_xx allocated irq
- Re: [GIT PULL] RTC for 5.5
- [PATCH] cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
- From: Enric Balletbo i Serra
- [GIT PULL] RTC for 5.5
- [PATCH] dt-bindings: rtc: Convert stm32 rtc bindings to json-schema
- Re: [PATCH v5 01/16] dt-bindings: regulator: Document ROHM BD71282 regulator bindings
- Re: [PATCH v5 01/16] dt-bindings: regulator: Document ROHM BD71282 regulator bindings
- Re: [PATCH v3 6/6] rtc: rtc-rc5t619: add ricoh rc5t619 RTC driver
- Re: [PATCH v5 06/10] mfd: Add support for the MediaTek MT6358 PMIC
- Re: [PATCH v5 01/16] dt-bindings: regulator: Document ROHM BD71282 regulator bindings
- [PATCH v3 4/6] mfd: rn5t618: add rtc related registers
- [PATCH v3 3/6] mfd: rn5t618: add irq support
- [PATCH v3 6/6] rtc: rtc-rc5t619: add ricoh rc5t619 RTC driver
- [PATCH v3 5/6] mfd: rn5t618: add more subdevices
- [PATCH v3 2/6] mfd: rn5t618: prepare for irq handling
[Index of Archives]
[Linux Sound]
[ALSA Users]
[ALSA Devel]
[Linux Audio Users]
[Linux Media]
[Kernel]
[Gimp]
[Yosemite News]
[Linux Media]