On Wed, 11 Dec 2019, Andreas Kemnade wrote:
> This adds support for IRQ handling in the RC5T619 which is required
> for properly implementing subdevices like RTC.
> For now only definitions for the variant RC5T619 are included.
>
> Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
> ---
> Changes in v4:
> merge rn5t618-irq.c into rn5t618.c
> use macros for IRQ table
>
> Changes in v3:
> alignment cleanup
>
> Changes in v2:
> - no dead code, did some more testing and thinking for that
> - remove extra empty lines
> drivers/mfd/Kconfig | 1 +
> drivers/mfd/rn5t618.c | 88 +++++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/rn5t618.h | 15 ++++++++
> 3 files changed, 104 insertions(+)
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index ae24d3ea68ea..522e068d0082 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1057,6 +1057,7 @@ config MFD_RN5T618
> depends on OF
> select MFD_CORE
> select REGMAP_I2C
> + select REGMAP_IRQ
> help
> Say yes here to add support for the Ricoh RN5T567,
> RN5T618, RC5T619 PMIC.
> diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
> index da5cd9c92a59..76d997c0cfe4 100644
> --- a/drivers/mfd/rn5t618.c
> +++ b/drivers/mfd/rn5t618.c
> @@ -8,6 +8,8 @@
>
> #include <linux/delay.h>
> #include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> #include <linux/mfd/core.h>
> #include <linux/mfd/rn5t618.h>
> #include <linux/module.h>
> @@ -45,9 +47,63 @@ static const struct regmap_config rn5t618_regmap_config = {
> .cache_type = REGCACHE_RBTREE,
> };
>
> +static const struct regmap_irq rc5t619_irqs[] = {
> + REGMAP_IRQ_REG(RN5T618_IRQ_SYS, 0, BIT(0)),
> + REGMAP_IRQ_REG(RN5T618_IRQ_DCDC, 0, BIT(1)),
> + REGMAP_IRQ_REG(RN5T618_IRQ_RTC, 0, BIT(2)),
> + REGMAP_IRQ_REG(RN5T618_IRQ_ADC, 0, BIT(3)),
> + REGMAP_IRQ_REG(RN5T618_IRQ_GPIO, 0, BIT(4)),
> + REGMAP_IRQ_REG(RN5T618_IRQ_CHG, 0, BIT(6)),
> +};
> +
> +static const struct regmap_irq_chip rc5t619_irq_chip = {
> + .name = "rc5t619",
> + .irqs = rc5t619_irqs,
> + .num_irqs = ARRAY_SIZE(rc5t619_irqs),
> + .num_regs = 1,
> + .status_base = RN5T618_INTMON,
> + .mask_base = RN5T618_INTEN,
> + .mask_invert = true,
> +};
> +
> static struct rn5t618 *rn5t618_pm_power_off;
> static struct notifier_block rn5t618_restart_handler;
>
> +int rn5t618_irq_init(struct rn5t618 *rn5t618)
Static?
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
