Hi, This patch must come first. Also, the correct prefix is dt-bindings: rtc: On 10/04/2020 19:26:59+0300, Claudiu Beznea wrote: > Add microchip,sam9x60-rtt to compatible list. > > Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt > index 6ae79d1843f3..b2f913ff6c69 100644 > --- a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt > +++ b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt > @@ -1,7 +1,7 @@ > Atmel AT91SAM9260 Real Time Timer > > Required properties: > -- compatible: should be: "atmel,at91sam9260-rtt" > +- compatible: should be: "atmel,at91sam9260-rtt" or "microchip,sam9x60-rtt" If you had a fallback on atmel,at91sam9260-rtt, this would make merging this series easier as this removes the need for 1/5 and 2/5. I think 2/5 may be useful in the future but as far as the aic fixup is concerned, both IPs are identical. > - reg: should encode the memory region of the RTT controller > - interrupts: rtt alarm/event interrupt > - clocks: should contain the 32 KHz slow clk that will drive the RTT block. > -- > 2.7.4 > -- Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
