Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH v3 4/5] PCI: j721e: Add PCIe support for AM64
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 3/5] PCI: j721e: Add PCIe support for J7200
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 2/5] PCI: cadence: Add quirk flag to set minimum delay in LTSSM Detect.Quiet state
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 1/5] PCI: cadence: Use bitfield for *quirk_retrain_flag* instead of bool
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 0/6] PCI: Add support for J7200 and AM64
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 2/3] PCI: j721e: Add PCI legacy interrupt support for J721E
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH V2 5/9] cpufreq: omap: Use auto-registration for energy model
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH V2 0/9] cpufreq: Auto-register with energy model
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 0/8] cpufreq: Auto-register with energy model
  • From: Quentin Perret <qperret@xxxxxxxxxx>
• Re: [PATCH 0/8] cpufreq: Auto-register with energy model
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 0/8] cpufreq: Auto-register with energy model
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 0/8] cpufreq: Auto-register with energy model
  • From: Quentin Perret <qperret@xxxxxxxxxx>
• Re: [PATCH 0/8] cpufreq: Auto-register with energy model
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 0/8] cpufreq: Auto-register with energy model
  • From: Quentin Perret <qperret@xxxxxxxxxx>
• Re: [PATCH 0/8] cpufreq: Auto-register with energy model
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 0/8] cpufreq: Auto-register with energy model
  • From: Quentin Perret <qperret@xxxxxxxxxx>
• Re: [PATCH] bus: ti-sysc: Fix error handling for sysc_check_active_timer()
  • From: Pavel Machek <pavel@xxxxxxx>
• Re: [PATCH] bus: ti-sysc: Fix gpt12 system timer issue with reserved status
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] bus: ti-sysc: Fix error handling for sysc_check_active_timer()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/8] cpufreq: Auto-register with energy model
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 0/8] cpufreq: Auto-register with energy model
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH 2/2] crypto: omap - Fix inconsistent locking of device lists
  • From: Ben Hutchings <ben.hutchings@xxxxxxx>
• [PATCH 1/2] crypto: omap - Avoid redundant copy when using truncated sg list
  • From: Ben Hutchings <ben.hutchings@xxxxxxx>
• [PATCH 0/2] omap-crypto fixes
  • From: Ben Hutchings <ben.hutchings@xxxxxxx>
• Re: [PATCH v2 net] net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted by drivers towards the bridge
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH AUTOSEL 4.4 2/6] ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 2/8] ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 02/10] ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 03/11] ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 03/13] ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 05/20] ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.13 05/24] ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 0/8] cpufreq: Auto-register with energy model
  • From: Quentin Perret <qperret@xxxxxxxxxx>
• Re: [PATCH net-next] devlink: Set device as early as possible
  • From: Leon Romanovsky <leon@xxxxxxxxxx>
• Re: [PATCH 0/8] cpufreq: Auto-register with energy model
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: [PATCH v2 net] net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted by drivers towards the bridge
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH] bus: ti-sysc: Fix gpt12 system timer issue with reserved status
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/2] pinctrl: single: Move test PCS_HAS_PINCONF in pcs_parse_bits_in_pinctrl_entry() to the beginning and fix its return value
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 net] net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted by drivers towards the bridge
  • From: Karsten Graul <kgraul@xxxxxxxxxxxxx>
• Re: [PATCH] bus: ti-sysc: Fix gpt12 system timer issue with reserved status
  • From: Pavel Machek <pavel@xxxxxxx>
• Re: [PATCH net-next] devlink: Set device as early as possible
  • From: Prabhakar Kushwaha <prabhakar.pkin@xxxxxxxxx>
• Re: [PATCH v2 net] net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted by drivers towards the bridge
  • From: Leon Romanovsky <leon@xxxxxxxxxx>
• Re: [PATCH 0/8] cpufreq: Auto-register with energy model
  • From: Quentin Perret <qperret@xxxxxxxxxx>
• Re: [PATCH v2 2/3] PCI: j721e: Add PCI legacy interrupt support for J721E
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• [PATCH v2 net] net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted by drivers towards the bridge
  • From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
• Re: [PATCH 5/8] cpufreq: omap: Use auto-registration for energy model
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: [PATCH 0/8] cpufreq: Auto-register with energy model
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: [PATCH net] net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted by drivers towards the bridge
  • From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
• Re: [PATCH 0/8] cpufreq: Auto-register with energy model
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 0/8] cpufreq: Auto-register with energy model
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: [PATCH net] net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted by drivers towards the bridge
  • From: Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH net] net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted by drivers towards the bridge
  • From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
• [PATCH 5/8] cpufreq: omap: Use auto-registration for energy model
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH 0/8] cpufreq: Auto-register with energy model
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: am335x-sancloud-bbe: Fix missing pinctrl refs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH net] net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted by drivers towards the bridge
  • From: Leon Romanovsky <leon@xxxxxxxxxx>
• Re: [PATCH net] net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted by drivers towards the bridge
  • From: Ido Schimmel <idosch@xxxxxxxxxx>
• Re: [PATCH v2 39/40] PCI: dwc: Move N_FTS setup to common setup
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/3] PCI: j721e: Add PCI legacy interrupt support for J721E
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 03/40] PCI: dwc: Allow overriding bridge pci_ops
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH net] net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted by drivers towards the bridge
  • From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
• Re: [PATCH v2 2/3] PCI: j721e: Add PCI legacy interrupt support for J721E
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH net-next] devlink: Set device as early as possible
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH net v2] net: ethernet: ti: cpsw: fix min eth packet size for non-switch use-cases
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH net-next] devlink: Set device as early as possible
  • From: Jiri Pirko <jiri@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] PCI: j721e: Add PCI legacy interrupt support for J721E
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: PCI: ti,j721e: Add bindings to specify legacy interrupts
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 5/6] misc: pci_endpoint_test: Do not request or allocate IRQs in probe
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH net-next] devlink: Set device as early as possible
  • From: Leon Romanovsky <leon@xxxxxxxxxx>
• Re: [PATCH v2 03/40] PCI: dwc: Allow overriding bridge pci_ops
  • From: Vidya Sagar <vidyas@xxxxxxxxxx>
• Re: [PATCH v2 39/40] PCI: dwc: Move N_FTS setup to common setup
  • From: Vidya Sagar <vidyas@xxxxxxxxxx>
• Re: [PATCH net-next] net: ethernet: ti: davinci_cpdma: revert "drop frame padding"
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH net-next] net: ethernet: ti: davinci_cpdma: revert "drop frame padding"
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 1/6] crypto: omap-sham - clear dma flags only after omap_sham_update_dma_stop()
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] phy: phy-twl4030-usb: Disable PHY for suspend
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH net-next 0/3] net: ethernet: ti: cpsw/emac: switch to use skb_put_padto()
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH net-next 0/3] net: ethernet: ti: cpsw/emac: switch to use skb_put_padto()
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH net-next 0/3] net: ethernet: ti: cpsw/emac: switch to use skb_put_padto()
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH net-next 0/3] net: ethernet: ti: cpsw/emac: switch to use skb_put_padto()
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH 2/2] ARM: dts: am335x-sancloud-bbe: Drop usb wifi comment
  • From: Paul Barker <paul.barker@xxxxxxxxxxxx>
• [PATCH 1/2] ARM: dts: am335x-sancloud-bbe: Fix missing pinctrl refs
  • From: Paul Barker <paul.barker@xxxxxxxxxxxx>
• Re: [PATCH v2] ARM: dts: am335x-bone: switch to new cpsw switch drv
  • From: Paul Barker <paul.barker@xxxxxxxxxxxx>
• Re: [PATCH 1/3] arm: omap2: Drop MACH_OMAP3517EVM entry
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] ARM: dts: am335x-bone: switch to new cpsw switch drv
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH next 00/15] ARM: dts: am335x: switch rest boards to new cpsw switch drv
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2] ARM: dts: am335x-bone: switch to new cpsw switch drv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH net v2] net: ethernet: ti: cpsw: fix min eth packet size for non-switch use-cases
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v2] ARM: dts: am335x-bone: switch to new cpsw switch drv
  • From: Paul Barker <paul.barker@xxxxxxxxxxxx>
• [PATCH v2] ARM: dts: am335x-bone: switch to new cpsw switch drv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 1/3] arm: omap2: Drop MACH_OMAP3517EVM entry
  • From: Peter Robinson <pbrobinson@xxxxxxxxx>
• [PATCH net-next 3/3] net: ethernet: ti: davinci_cpdma: drop frame padding
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH net-next 2/3] net: ethernet: ti: davinci_emac: switch to use skb_put_padto()
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH net-next 1/3] net: ethernet: ti: cpsw: switch to use skb_put_padto()
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH net-next 0/3] net: ethernet: ti: cpsw/emac: switch to use skb_put_padto()
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH net v2] net: ethernet: ti: cpsw: fix min eth packet size for non-switch use-cases
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v2 5/6] misc: pci_endpoint_test: Do not request or allocate IRQs in probe
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH v2 0/4] Add support for the SanCloud BBE Lite
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 2/3] Driver changes for ti-sysc for v5.15
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 3/3] Devicetree changes for omaps for v5.15
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 1/3] SoC changes for omaps for v5.15
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] PCI: j721e: Add PCI legacy interrupt support for J721E
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: PCI: ti,j721e: Add bindings to specify legacy interrupts
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH v2 5/6] misc: pci_endpoint_test: Do not request or allocate IRQs in probe
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 3/3] PCI: j721e: Add PCI legacy interrupt support for J7200
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 2/3] PCI: j721e: Add PCI legacy interrupt support for J721E
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 1/3] dt-bindings: PCI: ti,j721e: Add bindings to specify legacy interrupts
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 0/3] PCI: Add legacy interrupt support in pci-j721e
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 0/4] Add support for the SanCloud BBE Lite
  • From: Paul Barker <paul.barker@xxxxxxxxxxxx>
• [GIT PULL] Fixes for omaps for v5.14-rc series
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/11] Add PRU-ICSS nodes on AM335x, AM437x & AM57xx SoCs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/6] PCI: Add support for J7200 and AM64
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH v2 3/6] PCI: j721e: Add PCIe support for J7200
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH v2 2/6] PCI: cadence: Add quirk flag to set minimum delay in LTSSM Detect.Quiet state
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH v2 5/6] misc: pci_endpoint_test: Do not request or allocate IRQs in probe
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• [PATCH v2 6/6] misc: pci_endpoint_test: Add deviceID for AM64 and J7200
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 5/6] misc: pci_endpoint_test: Do not request or allocate IRQs in probe
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 4/6] PCI: j721e: Add PCIe support for AM64
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 3/6] PCI: j721e: Add PCIe support for J7200
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 2/6] PCI: cadence: Add quirk flag to set minimum delay in LTSSM Detect.Quiet state
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 1/6] PCI: cadence: Use bitfield for *quirk_retrain_flag* instead of bool
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 0/6] PCI: Add support for J7200 and AM64
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 1/2] dt-bindings: serial: 8250: Update for standard overrun-throttle property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] memory: omap-gpmc: Clear GPMC_CS_CONFIG7 register on restore if unused
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH 2/2] memory: omap-gpmc: Drop custom PM calls with cpu_pm notifier
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: mfd: Convert ti-tsc-adc bindings to YAML schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 00/11] Add PRU-ICSS nodes on AM335x, AM437x & AM57xx SoCs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 01/11] ARM: dts: am33xx-l4: Add PRUSS node
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 06/11] ARM: dts: am335x-icev2: Enable PRU-ICSS module
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 02/11] ARM: dts: am33xx-l4: Add PRUSS MDIO controller node
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 11/11] ARM: dts: am57xx: Add PRUSS MDIO controller nodes
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 07/11] ARM: dts: am4372: Add the PRU-ICSS1 DT node
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 09/11] ARM: dts: am4372: Add PRUSS MDIO controller node
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 05/11] ARM: dts: am335x-evmsk: Enable PRU-ICSS module
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 03/11] ARM: dts: am335x-bone-common: Enable PRU-ICSS node
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 04/11] ARM: dts: am335x-evm: Enable PRU-ICSS module
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 08/11] ARM: dts: am4372: Add the PRU-ICSS0 DT node
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 10/11] ARM: dts: am57xx: Add PRU-ICSS nodes
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 1/2] memory: omap-gpmc: Clear GPMC_CS_CONFIG7 register on restore if unused
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH] dmaengine: of-dma: router_xlate to return -EPROBE_DEFER if controller is not yet available
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 1/2] serial: omap: Disable PM runtime autoidle to remove pm_runtime_irq_safe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• [PATCH] phy: phy-twl4030-usb: Disable PHY for suspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] usb: musb: Fix suspend and resume issues for PHYs on I2C and SPI
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] serial: 8250: 8250_omap: Fix possible interrupt storm
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] serial: 8250_omap: Handle optional overrun-throttle-ms property
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: serial: 8250: Update for standard overrun-throttle property
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] serial: omap: Only allow if 8250_omap is not selected
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] serial: omap: Disable PM runtime autoidle to remove pm_runtime_irq_safe()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/6] crypto: omap-sham - drop suspend and resume functions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/6] crypto: omap-sham - drop old hw_init and unused FLAGS_INIT
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/6] crypto: omap-sham - drop pm_runtime_irqsafe() usage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/6] crypto: omap-sham - add missing pm_runtime_dontuse_autosuspend()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/6] crypto: omap-sham - initialize req only after omap_sham_hw_init()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/6] crypto: omap-sham - clear dma flags only after omap_sham_update_dma_stop()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] memory: omap-gpmc: Drop custom PM calls with cpu_pm notifier
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] memory: omap-gpmc: Clear GPMC_CS_CONFIG7 register on restore if unused
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] pinctrl: single: Move test PCS_HAS_PINCONF in pcs_parse_bits_in_pinctrl_entry() to the beginning
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/4] Add support for the SanCloud BBE Lite
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] ARM: dts / ti-sysc: Enable McASP on OMAP4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Add support for dra762 abz package
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] ARM: dts: am335x-boneblue: add gpio-line-names
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] arm: omap2: Drop MACH_OMAP3517EVM entry
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] ARM: dts: am437x-l4: fix typo in can@0 node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap2+: hwmod: fix potential NULL pointer access
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] bus: ti-sysc: AM3: RNG is GP only
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2 1/2] ARM: dts: am437x-l4: fix typo in can@0 node
  • From: Dario Binacchi <dariobin@xxxxxxxxx>
• [PATCH] dt-bindings: mfd: Convert ti-tsc-adc bindings to YAML schema
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH v3 1/3] ARM: dts: omap: Drop references to opp.txt
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH 1/2] ARM: dts: am437x-l4: fix typo in can@0 node
  • From: Dario Binacchi <dariobin@xxxxxxxxx>
• Re: [RFC PATCH v1 net-next 1/1] net: ethernet: ti: cpsw: allow MTU > 1500 when overridden by module parameter
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [RFC PATCH v1 net-next 1/1] net: ethernet: ti: cpsw: allow MTU > 1500 when overridden by module parameter
  • From: Colin Foster <colin.foster@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v1 net-next 1/1] net: ethernet: ti: cpsw: allow MTU > 1500 when overridden by module parameter
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v2 1/2] pinctrl: single: Fix error return code in pcs_parse_bits_in_pinctrl_entry()
  • From: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
• [PATCH v2 2/2] pinctrl: single: Move test PCS_HAS_PINCONF in pcs_parse_bits_in_pinctrl_entry() to the beginning
  • From: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
• [PATCH v2 0/2] pinctrl: single: Move test PCS_HAS_PINCONF in pcs_parse_bits_in_pinctrl_entry() to the beginning and fix its return value
  • From: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
• [RFC PATCH v1 net-next 1/1] net: ethernet: ti: cpsw: allow MTU > 1500 when overridden by module parameter
  • From: Colin Foster <colin.foster@xxxxxxxxxxxxxxxx>
• [PATCH] ARM: omap2+: hwmod: fix potential NULL pointer access
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• [PATCH] bus: ti-sysc: AM3: RNG is GP only
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: Clean-up OPP binding node names in examples
  • From: Georgi Djakov <djakov@xxxxxxxxxx>
• Re: [PATCH v3 3/3] dt-bindings: opp: Convert to DT schema
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• [PATCH v3 1/3] ARM: dts: omap: Drop references to opp.txt
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: Clean-up OPP binding node names in examples
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 3/3] dt-bindings: opp: Convert to DT schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/4] ARM: dts: am335x-sancloud-bbe-lite: New devicetree
  • From: Paul Barker <paul.barker@xxxxxxxxxxxx>
• [PATCH v2 4/4] MAINTAINERS: Adopt SanCloud dts files as supported
  • From: Paul Barker <paul.barker@xxxxxxxxxxxx>
• [PATCH v2 3/4] ARM: dts: am335x-sancloud-bbe-lite: New devicetree
  • From: Paul Barker <paul.barker@xxxxxxxxxxxx>
• [PATCH v2 2/4] ARM: dts: am335x-sancloud-bbe: Extract common code
  • From: Paul Barker <paul.barker@xxxxxxxxxxxx>
• [PATCH v2 1/4] ARM: dts: am335x-boneblack: Extract HDMI config
  • From: Paul Barker <paul.barker@xxxxxxxxxxxx>
• [PATCH v2 0/4] Add support for the SanCloud BBE Lite
  • From: Paul Barker <paul.barker@xxxxxxxxxxxx>
• Re: [PATCH v5 3/5] dt-bindings: PCI: update references to Designware schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v5 3/5] dt-bindings: PCI: update references to Designware schema
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v5 0/5] convert designware-pcie.txt to yaml
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH] dmaengine: of-dma: router_xlate to return -EPROBE_DEFER if controller is not yet available
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 3/3] ARM: dts: omap4-l4-abe: Add McASP configuration
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 2/3] bus: ti-sysc: Add quirk for OMAP4 McASP to disable SIDLE mode
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 0/3] ARM: dts / ti-sysc: Enable McASP on OMAP4
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 1/3] ARM: dts: omap4-l4-abe: Correct sidle modes for McASP
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH] ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• Re: [PATCH] pinctrl: single: Fix error return code in pcs_parse_bits_in_pinctrl_entry()
  • From: "Leizhen (ThunderTown)" <thunder.leizhen@xxxxxxxxxx>
• Re: [PATCH] pinctrl: single: Fix error return code in pcs_parse_bits_in_pinctrl_entry()
  • From: "Leizhen (ThunderTown)" <thunder.leizhen@xxxxxxxxxx>
• [PATCH] ARM: dts: Add support for dra762 abz package
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• OMAP2430 kernel hangs on call to omap2xxx_restart
  • From: David Russell <david.russell73@xxxxxxxxx>
• Re: [PATCH] pinctrl: single: Fix error return code in pcs_parse_bits_in_pinctrl_entry()
  • From: "weiyongjun (A)" <weiyongjun1@xxxxxxxxxx>
• [PATCH] pinctrl: single: Fix error return code in pcs_parse_bits_in_pinctrl_entry()
  • From: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 06/10] ARM: dts: omap5-board-common: align gpio hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 18/28] ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 05/10] ARM: dts: am437x: align gpio hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 10/18] ARM: dts: omap5-board-common: align gpio hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 09/18] ARM: dts: am437x: align gpio hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 16/28] ARM: dts: am437x: align gpio hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 17/28] ARM: dts: omap5-board-common: align gpio hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 22/39] ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 15/28] ARM: dts: am335x: align GPIO hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 21/39] ARM: dts: omap5-board-common: align gpio hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 19/39] ARM: dts: am335x: align GPIO hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 29/51] ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 20/39] ARM: dts: am437x: align gpio hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 28/51] ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 23/51] ARM: dts: am335x: align GPIO hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 26/51] ARM: dts: omap5-board-common: align gpio hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 24/51] ARM: dts: am437x: align gpio hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 27/51] ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 25/51] ARM: dts: omap3: align gpio hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 66/88] ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configured
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 39/88] ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 37/88] ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 41/88] ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 38/88] ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 40/88] ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 36/88] ARM: dts: omap5-board-common: align gpio hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 35/88] ARM: dts: omap3: align gpio hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 34/88] ARM: dts: am437x: align gpio hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 33/88] ARM: dts: am335x: align GPIO hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.12 040/102] ARM: dts: am335x: align GPIO hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.12 076/102] ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configured
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.12 048/102] ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.12 047/102] ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.12 046/102] ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.12 045/102] ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.12 044/102] ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.12 042/102] ARM: dts: omap3: align gpio hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.12 043/102] ARM: dts: omap5-board-common: align gpio hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.12 041/102] ARM: dts: am437x: align gpio hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.13 081/108] ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configured
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.13 048/108] ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.13 042/108] ARM: dts: omap3: align gpio hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.13 047/108] ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.13 046/108] ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.13 043/108] ARM: dts: omap5-board-common: align gpio hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.13 045/108] ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.13 044/108] ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.13 041/108] ARM: dts: am437x: align gpio hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.13 040/108] ARM: dts: am335x: align GPIO hog names with dt-schema
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v2] omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v4 3/5] dt-bindings: PCI: update references to Designware schema
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v4 0/5] convert designware-pcie.txt and kirin-pcie.txt to yaml
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH] serial: 8250: 8250_omap: Fix possible interrupt storm
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] serial: 8250: 8250_omap: Fix possible interrupt storm
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] serial: 8250: 8250_omap: Fix possible interrupt storm
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: PCI: designware-pcie.txt: convert it to yaml
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH] serial: 8250: 8250_omap: Fix possible interrupt storm
  • From: andy@surfacebook.localdomain
• Re: [PATCH v3 1/2] dt-bindings: PCI: designware-pcie.txt: convert it to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: PCI: designware-pcie.txt: convert it to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/5] ASoC: ti: davinci-mcasp: Fix the DIT mode and OMAP4 support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] ASoC: ti: delete some dead code in omap_abe_probe()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] ARM: dts: am335x-boneblue: add gpio-line-names
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-boneblue: add gpio-line-names
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v2] ARM: dts: am335x-boneblue: add gpio-line-names
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: PCI: designware-pcie.txt: convert it to yaml
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v3 0/2] convert designware-pcie.txt and kirin-pcie.txt to yaml
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [Backport for 4.19.y PATCH 1/4] ARM: OMAP: replace setup_irq() by request_irq()
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v2 0/5] ASoC: ti: davinci-mcasp: Fix the DIT mode and OMAP4 support
  • From: Péter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH v2 0/5] ASoC: ti: davinci-mcasp: Fix the DIT mode and OMAP4 support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [Backport for 4.19.y PATCH 4/4] clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [Backport for 4.19.y PATCH 3/4] clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [Backport for 4.19.y PATCH 2/4] clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [Backport for 4.19.y PATCH 1/4] ARM: OMAP: replace setup_irq() by request_irq()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/5] ASoC: ti: davinci-mcasp: Fix the DIT mode and OMAP4 support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/5] ASoC: ti: davinci-mcasp: Fix the DIT mode and OMAP4 support
  • From: Péter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH v2 0/5] ASoC: ti: davinci-mcasp: Fix the DIT mode and OMAP4 support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/5] PCI: j721e: Add PCIe support for J7200
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH 5/5] misc: pci_endpoint_test: Add deviceID for AM64 and J7200
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 4/5] misc: pci_endpoint_test: Do not request or allocate IRQs in probe
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 3/5] PCI: j721e: Add PCIe support for AM64
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 2/5] PCI: j721e: Add PCIe support for J7200
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 1/5] PCI: cadence: Add quirk flag to set minimum delay in LTSSM Detect.Quiet state
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 0/5] PCI: Add support for J7200 and AM64
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 5/5] ARM: dts: omap4-l4-abe: Add McASP configuration
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH v2 4/5] ARM: dts: omap4-l4-abe: Correct sidle modes for McASP
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH v2 3/5] ASoC: ti: davinci-mcasp: Add support for the OMAP4 version of McASP
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH v2 2/5] ASoC: dt-bindings: davinci-mcasp: Add compatible string for OMAP4
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH v2 1/5] ASoC: ti: davinci-mcasp: Fix DIT mode support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH v2 0/5] ASoC: ti: davinci-mcasp: Fix the DIT mode and OMAP4 support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH 1/5] ASoC: ti: davinci-mcasp: Fix DIT mode support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/5] ASoC: ti: davinci-mcasp: Fix the DIT mode and OMAP4 support
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 1/5] ASoC: ti: davinci-mcasp: Fix DIT mode support
  • From: Péter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH 0/5] ASoC: ti: davinci-mcasp: Fix the DIT mode and OMAP4 support
  • From: Péter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH 0/5] ASoC: ti: davinci-mcasp: Fix the DIT mode and OMAP4 support
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 5/5] ARM: dts: omap4-l4-abe: Add McASP configuration
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 4/5] ARM: dts: omap4-l4-abe: Correct sidle modes for McASP
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 3/5] ASoC: ti: davinci-mcasp: Add support for the OMAP4 version of McASP
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 2/5] ASoC: dt-bindings: davinci-mcasp: Add compatible string for OMAP4
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 1/5] ASoC: ti: davinci-mcasp: Fix DIT mode support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 0/5] ASoC: ti: davinci-mcasp: Fix the DIT mode and OMAP4 support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH v2] omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] regulator: palmas: set supply_name after registering the regulator
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] regulator: palmas: set supply_name after registering the regulator
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] regulator: palmas: set supply_name after registering the regulator
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] regulator: palmas: set supply_name after registering the regulator
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] ASoC: ti: delete some dead code in omap_abe_probe()
  • From: Péter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH] regulator: palmas: set supply_name after registering the regulator
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] regulator: palmas: set supply_name after registering the regulator
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] regulator: palmas: set supply_name after registering the regulator
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] ASoC: ti: delete some dead code in omap_abe_probe()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm: extend pfn_valid to take into accound freed memory map alignment
  • From: Mike Rapoport <rppt@xxxxxxxxxxxxx>
• Re: [PATCH] regulator: palmas: set supply_name after registering the regulator
  • From: "Graeme Gregory" <gg@xxxxxxxxxxxxxxx>
• Re: [PATCH] regulator: palmas: set supply_name after registering the regulator
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] regulator: palmas: set supply_name after registering the regulator
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] regulator: palmas: set supply_name after registering the regulator
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] regulator: palmas: set supply_name after registering the regulator
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] regulator: palmas: set supply_name after registering the regulator
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] ARM: dts: am335x-sancloud-bbe-lite: New devicetree
  • From: Paul Barker <paul.barker@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm: extend pfn_valid to take into accound freed memory map alignment
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm: extend pfn_valid to take into accound freed memory map alignment
  • From: Mike Rapoport <rppt@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm: extend pfn_valid to take into accound freed memory map alignment
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm: extend pfn_valid to take into accound freed memory map alignment
  • From: Mike Rapoport <rppt@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm: extend pfn_valid to take into accound freed memory map alignment
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm: extend pfn_valid to take into accound freed memory map alignment
  • From: Mike Rapoport <rppt@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm: extend pfn_valid to take into accound freed memory map alignment
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm: extend pfn_valid to take into accound freed memory map alignment
  • From: Mike Rapoport <rppt@xxxxxxxxxxxxx>
• Re: [PATCH] mmc: Prefer unsigned int to bare use of unsigned
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm: extend pfn_valid to take into accound freed memory map alignment
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH -next] drivers: ti: remove redundant error message in adpll.c
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH] PCI: j721e: Fix an error handling path in 'j721e_pcie_probe()'
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH] OMAP: DSS2: OMAPFB: fix potential GPF
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• Re: [PATCH] OMAP: DSS2: OMAPFB: fix potential GPF
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH] mmc: Prefer unsigned int to bare use of unsigned
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH] ARM: omap2: remove unneeded variable: "errata"
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] OMAP: DSS2: OMAPFB: fix potential GPF
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: gpio: pcf857x: Convert to json-schema
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] remoteproc: pru: Add support for various PRU cores on K3 AM64x SoCs
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [PATCH bpf-next v5 19/19] net: ti: remove rcu_read_lock() around XDP program invocation
  • From: Toke Høiland-Jørgensen <toke@xxxxxxxxxx>
• Re: [PATCH] ARM: omap2: remove unneeded variable: "errata"
  • From: Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx>
• [PATCH] ARM: omap2: remove unneeded variable: "errata"
  • From: 13145886936@xxxxxxx
• Re: Regression? omap2plus_defconfig bloat due drivers/media/Kconfig changes
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH 2/2] remoteproc: pru: Add support for various PRU cores on K3 AM64x SoCs
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 1/2] dt-bindings: remoteproc: pru: Update bindings for K3 AM64x SoCs
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 2/2] remoteproc: pru: Add support for various PRU cores on K3 AM64x SoCs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 1/2] dt-bindings: remoteproc: pru: Update bindings for K3 AM64x SoCs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 0/2] Add AM64x SoC support to PRU remoteproc driver
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH bpf-next v4 19/19] net: ti: remove rcu_read_lock() around XDP program invocation
  • From: Toke Høiland-Jørgensen <toke@xxxxxxxxxx>
• Re: [PATCH v2] serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Pali Rohár <pali@xxxxxxxxxx>
• [PATCH v2] serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH] serial: 8250: 8250_omap: Fix possible interrupt storm
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH] serial: 8250: 8250_omap: Fix possible interrupt storm
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCH v2 0/4] PCI: dwc: pci-dra7xx: miscellaneous improvements
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH 0/2] dt-bindings: pwm: pwm-tiecap: Convert to json schema
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: i2c: ce4100: Replace "ti,pcf8575" by "nxp,pcf8575"
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 3/4] ARM: dts: am335x-sancloud-bbe-lite: New devicetree
  • From: Robert Nelson <robertcnelson@xxxxxxxxx>
• Re: [PATCH v2] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH v2] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [GIT PULL 2/2] Devicetree binding clean-up for omaps for v5.14
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 1/2] Non-urgent fixes for omaps for v5.14
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] USB4 regression fix for TI DRA74X
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH bpf-next v3 16/16] net: ti: remove rcu_read_lock() around XDP program invocation
  • From: Toke Høiland-Jørgensen <toke@xxxxxxxxxx>
• Re: [PATCH -next] apply: use DEFINE_SPINLOCK() instead of spin_lock_init().
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 00/10] Rid W=1 warnings from Bus
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/10] Rid W=1 warnings from Bus
  • From: Laurentiu Tudor <laurentiu.tudor@xxxxxxx>
• Re: [PATCH 00/10] Rid W=1 warnings from Bus
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 4/4] MAINTAINERS: Adopt SanCloud dts files as supported
  • From: Paul Barker <paul.barker@xxxxxxxxxxxx>
• [PATCH 3/4] ARM: dts: am335x-sancloud-bbe-lite: New devicetree
  • From: Paul Barker <paul.barker@xxxxxxxxxxxx>
• [PATCH 2/4] ARM: dts: am335x-sancloud-bbe: Extract common code
  • From: Paul Barker <paul.barker@xxxxxxxxxxxx>
• [PATCH 1/4] ARM: dts: am335x-boneblack: Extract HDMI config
  • From: Paul Barker <paul.barker@xxxxxxxxxxxx>
• [PATCH 0/4] Add support for the SanCloud BBE Lite
  • From: Paul Barker <paul.barker@xxxxxxxxxxxx>
• [Backport for 5.4.y PATCHv2 4/4] clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [Backport for 5.4.y PATCHv2 3/4] clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [Backport for 5.4.y PATCHv2 2/4] clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [Backport for 5.4.y PATCHv2 1/4] ARM: OMAP: replace setup_irq() by request_irq()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH -next] drivers: ti: remove redundant error message in adpll.c
  • From: Yu Jiahua <yujiahua1@xxxxxxxxxx>
• [PATCH -next] apply: use DEFINE_SPINLOCK() instead of spin_lock_init().
  • From: Yu Jiahua <yujiahua1@xxxxxxxxxx>
• [PATCH bpf-next v2 16/16] net: ti: remove rcu_read_lock() around XDP program invocation
  • From: Toke Høiland-Jørgensen <toke@xxxxxxxxxx>
• Re: [PATCH] arm: Define arch_is_kernel_initmem_freed() for lockdep
  • From: Jan Kardell <jan.kardell@xxxxxxxxxx>
• Re: [PATCH] wlcore/wl12xx: Fix wl12xx get_mac error if device is in ELP
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: musb: Simplify cable state handling
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Regression? omap2plus_defconfig bloat due drivers/media/Kconfig changes
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• [PATCH 2/3] arm: omap2: Drop obsolete MACH_OMAP3_PANDORA entry
  • From: Peter Robinson <pbrobinson@xxxxxxxxx>
• [PATCH 1/3] arm: omap2: Drop MACH_OMAP3517EVM entry
  • From: Peter Robinson <pbrobinson@xxxxxxxxx>
• [PATCH 3/3] arm: omap2: Drop the unused OMAP_PACKAGE_* KConfig entries
  • From: Peter Robinson <pbrobinson@xxxxxxxxx>
• [PATCH next 15/15] ARM: dts: am33xx: update ethernet aliases
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH next 14/15] ARM: dts: am335x-sl50: switch to new cpsw switch drv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH next 12/15] ARM: dts: am335x-phycore: switch to new cpsw switch drv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH next 13/15] ARM: dts: am335x-shc: switch to new cpsw switch drv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH next 11/15] ARM: dts: am335x-pepper: switch to new cpsw switch drv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH next 10/15] ARM: dts: am335x-pdu001: switch to new cpsw switch drv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH next 09/15] ARM: dts: am335x-osd3358-sm-red: switch to new cpsw switch drv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH next 08/15] ARM: dts: am335x-myirtech: switch to new cpsw switch drv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH next 07/15] ARM: dts: am335x-moxa-uc: switch to new cpsw switch drv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH next 06/15] ARM: dts: am335x-lxm: switch to new cpsw switch drv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH next 05/15] ARM: dts: am335x-igep0033: switch to new cpsw switch drv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH next 04/15] ARM: dts: am335x-cm-t335: switch to new cpsw switch drv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH next 03/15] ARM: dts: am335x-chiliboard: switch to new cpsw switch drv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH next 02/15] ARM: dts: am335x-nano: switch to new cpsw switch drv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH next 01/15] ARM: dts: am335x-baltos: switch to new cpsw switch drv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH next 00/15] ARM: dts: am335x: switch rest boards to new cpsw switch drv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH next] ARM: dts: am335x-bone: switch to new cpsw switch drv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH net] net: ethernet: ti: cpsw: fix min eth packet size for non-switch use-cases
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH net] net: ethernet: ti: cpsw: fix min eth packet size for non-switch use-cases
  • From: Ben Hutchings <ben.hutchings@xxxxxxxxxxxxx>
• Re: Patches for espresso3g
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Patches for espresso3g
  • From: Mighty M <mightymb17@xxxxxxxxx>
• Re: Ethernet padding - ti_cpsw vs DSA tail tag
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] bus: ti-sysc: Fix gpt12 system timer issue with reserved status
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• [PATCH net] net: ethernet: ti: cpsw: fix min eth packet size for non-switch use-cases
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v2 2/4] ARM: dts: dra7x-evm: Drop "ti,pcf8575"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] ARM: dts: ti: Fix DT warnings for ecap nodes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3] arm: dts: ti: drop usage of redundant compatible
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH -next] bus: ti-sysc: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 09/10] bus: ti-sysc: Correct misdocumentation of 'sysc_ioremap()'
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap2/3: Drop dmas property from I2C node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/2] arm: am335x/am437x: Fix ti,pindir-d0-out-d1-in property to boolean
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] bus: ti-sysc: Fix gpt12 system timer issue with reserved status
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4] ARM: dts: dra7: Fix duplicate USB4 target module node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] usb: musb: Simplify cable state handling
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [EXTERNAL] OMAP2430 kernel hangs on ioremap of IVA2.1 addresses
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH bpf-next 17/17] net: ti: remove rcu_read_lock() around XDP program invocation
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [EXTERNAL] OMAP2430 kernel hangs on ioremap of IVA2.1 addresses
  • From: David Russell <david.russell73@xxxxxxxxx>
• Re: [PATCH 1/2] usb: musb: Simplify cable state handling
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH bpf-next 17/17] net: ti: remove rcu_read_lock() around XDP program invocation
  • From: Toke Høiland-Jørgensen <toke@xxxxxxxxxx>
• Re: [PATCH 1/2] usb: musb: Simplify cable state handling
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [Backport for linux-5.4.y PATCH 2/4] ARM: OMAP2+: Prepare timer code to backport dra7 timer wrap errata i940
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Backport for linux-5.4.y PATCH 2/4] ARM: OMAP2+: Prepare timer code to backport dra7 timer wrap errata i940
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [Backport for linux-5.4.y PATCH 2/4] ARM: OMAP2+: Prepare timer code to backport dra7 timer wrap errata i940
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Backport for linux-5.4.y PATCH 2/4] ARM: OMAP2+: Prepare timer code to backport dra7 timer wrap errata i940
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [EXTERNAL] OMAP2430 kernel hangs on ioremap of IVA2.1 addresses
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Backport for linux-5.4.y PATCH 2/4] ARM: OMAP2+: Prepare timer code to backport dra7 timer wrap errata i940
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESEND PATCH v7 5/5] clk: ti: add am33xx/am43xx spread spectrum clock support
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [RESEND PATCH v7 4/5] ARM: dts: am43xx-clocks: add spread spectrum support
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [RESEND PATCH v7 3/5] ARM: dts: am33xx-clocks: add spread spectrum support
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [RESEND PATCH v7 2/5] dt-bindings: ti: dpll: add spread spectrum support
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [RESEND PATCH v7 1/5] clk: ti: fix typo in routine description
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [Backport for linux-5.4.y PATCH 2/4] ARM: OMAP2+: Prepare timer code to backport dra7 timer wrap errata i940
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v4] ARM: dts: dra7: Fix duplicate USB4 target module node
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v2 2/2] ARM: dts: am437x: align ti,pindir-d0-out-d1-in property with dt-shema
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH v2 1/2] ARM: dts: am335x: align ti,pindir-d0-out-d1-in property with dt-shema
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH v2 0/2] arm: am335x/am437x: Fix ti,pindir-d0-out-d1-in property to boolean
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: [PATCH 3/5] arm64: dts: ti: am65: align ti,pindir-d0-out-d1-in property with dt-shema
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH AUTOSEL 4.4 04/14] ARM: OMAP2+: Fix build warning when mmc_omap is not built
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 05/15] ARM: OMAP2+: Fix build warning when mmc_omap is not built
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 05/18] ARM: OMAP2+: Fix build warning when mmc_omap is not built
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 06/21] ARM: OMAP2+: Fix build warning when mmc_omap is not built
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 10/29] ARM: OMAP2+: Fix build warning when mmc_omap is not built
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 14/39] ARM: OMAP2+: Fix build warning when mmc_omap is not built
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 13/39] ARM: OMAP1: Fix use of possibly uninitialized irq variable
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.12 19/49] ARM: OMAP2+: Fix build warning when mmc_omap is not built
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.12 18/49] ARM: OMAP1: Fix use of possibly uninitialized irq variable
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• RE: [EXTERNAL] OMAP2430 kernel hangs on ioremap of IVA2.1 addresses
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• OMAP2430 kernel hangs on ioremap of IVA2.1 addresses
  • From: David Russell <david.russell73@xxxxxxxxx>
• Re: [PATCH 3/5] arm64: dts: ti: am65: align ti,pindir-d0-out-d1-in property with dt-shema
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: [PATCH 3/5] arm64: dts: ti: am65: align ti,pindir-d0-out-d1-in property with dt-shema
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 2/2] power: supply: cpcap-battery: kconfig: depend on ( NVMEM || !NVMEM )
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] power: supply: cpcap-battery: kconfig: depend on ( NVMEM || !NVMEM )
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• Re: [PATCH] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESEND PATCH] pinctrl: single: config: enable the pin's input
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] ARM: OMAP2+: remove duplicated prototype
  • From: Alejandro Lucero <alucero@xxxxxxxxx>
• [RESEND PATCH v7 5/5] clk: ti: add am33xx/am43xx spread spectrum clock support
  • From: Dario Binacchi <dariobin@xxxxxxxxx>
• [RESEND PATCH v7 4/5] ARM: dts: am43xx-clocks: add spread spectrum support
  • From: Dario Binacchi <dariobin@xxxxxxxxx>
• [RESEND PATCH v7 3/5] ARM: dts: am33xx-clocks: add spread spectrum support
  • From: Dario Binacchi <dariobin@xxxxxxxxx>
• [RESEND PATCH v7 2/5] dt-bindings: ti: dpll: add spread spectrum support
  • From: Dario Binacchi <dariobin@xxxxxxxxx>
• [RESEND PATCH v7 1/5] clk: ti: fix typo in routine description
  • From: Dario Binacchi <dariobin@xxxxxxxxx>
• [RESEND PATCH v7 0/5] clk: ti: add am33xx spread spectrum clock support
  • From: Dario Binacchi <dariobin@xxxxxxxxx>
• Re: [PATCH] usb: musb: Check devctl status again for a spurious session request
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: musb: Check devctl status again for a spurious session request
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH] usb: musb: Check devctl status again for a spurious session request
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Regression with 6cfcd5563b4f on BeagleBoard Rev C2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP4460 cpufreq crashes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: gpio: pcf857x: Convert to json-schema
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: gpio: pcf857x: Convert to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: i2c: ce4100: Replace "ti,pcf8575" by "nxp,pcf8575"
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: pwm: pwm-tiecap: Add compatible string for AM64 SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: pwm: pwm-tiecap: Convert to json schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: pwm: tiehrpwm: Make clock and clock-names as required properties
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/4] arm: dts: ti: drop usage of redundant compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: i2c: Move i2c-omap.txt to YAML format
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: i2c: ce4100: Replace "ti,pcf8575" by "nxp,pcf8575"
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] usb: musb: Check devctl status again for a spurious session request
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: Regression with 6cfcd5563b4f on BeagleBoard Rev C2
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: [PATCH] usb: musb: Check devctl status again for a spurious session request
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: OMAP4460 cpufreq crashes
  • From: Florian Boor <florian.boor@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] power: supply: cpcap-battery: kconfig: depend on ( NVMEM || !NVMEM )
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] power: supply: cpcap-battery: Add battery type auto detection for mapphone devices
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v2] power: supply: cpcap-charger: get the battery inserted infomation from cpcap-battery
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v2] power: supply: cpcap-battery: invalidate empty->counter_uah and charge_full when charge_now indicates that they are grossly wrong
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: Check devctl status again for a spurious session request
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH] usb: musb: Check devctl status again for a spurious session request
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: musb: Check devctl status again for a spurious session request
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v3 0/2] dt-bindings: pwm: pwm-tiehrpwm: Convert to json schema
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH] usb: musb: Check devctl status again for a spurious session request
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: musb: Check devctl status again for a spurious session request
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [RESEND PATCH] pinctrl: single: config: enable the pin's input
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] usb: musb: Implement tracing for state change events
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] usb: musb: Simplify cable state handling
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 0/5] clk: ti: add am33xx spread spectrum clock support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Regression with 6cfcd5563b4f on BeagleBoard Rev C2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: musb: Check devctl status again for a spurious session request
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH] wlcore/wl12xx: Fix wl12xx get_mac error if device is in ELP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v4] ARM: dts: dra7: Fix duplicate USB4 target module node
  • From: Gowtham Tammana <g-tammana@xxxxxx>
• Re: [PATCH v2] dt-bindings: mailbox: Convert omap-mailbox.txt binding to YAML
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: pwm: pwm-tiehrpwm: Add compatible string for AM64 SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: pwm: pwm-tiehrpwm: Convert to json schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: i2c: Move i2c-omap.txt to YAML format
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Regression with 6cfcd5563b4f on BeagleBoard Rev C2
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• [RESEND PATCH] pinctrl: single: config: enable the pin's input
  • From: Dario Binacchi <dariobin@xxxxxxxxx>
• [PATCH v7 3/5] ARM: dts: am33xx-clocks: add spread spectrum support
  • From: Dario Binacchi <dariobin@xxxxxxxxx>
• [PATCH v7 1/5] clk: ti: fix typo in routine description
  • From: Dario Binacchi <dariobin@xxxxxxxxx>
• [PATCH v7 5/5] clk: ti: add am33xx/am43xx spread spectrum clock support
  • From: Dario Binacchi <dariobin@xxxxxxxxx>
• [PATCH v7 4/5] ARM: dts: am43xx-clocks: add spread spectrum support
  • From: Dario Binacchi <dariobin@xxxxxxxxx>
• [PATCH v7 0/5] clk: ti: add am33xx spread spectrum clock support
  • From: Dario Binacchi <dariobin@xxxxxxxxx>
• [PATCH 5/5] dt-bindings: spi: omap-spi: Convert to json-schema
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH 4/5] arm64: dts: ti: k3-am642-evm: align ti,pindir-d0-out-d1-in property with dt-shema
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH 3/5] arm64: dts: ti: am65: align ti,pindir-d0-out-d1-in property with dt-shema
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH 2/5] ARM: dts: am437x: align ti,pindir-d0-out-d1-in property with dt-shema
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH 1/5] ARM: dts: am335x: align ti,pindir-d0-out-d1-in property with dt-shema
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH 0/5] dt-bindings: spi: omap-spi: Convert to json-schema
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [Backport for linux-5.4.y PATCH 4/4] ARM: OMAP2+: Handle dra7 timer wrap errata i940
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [Backport for linux-5.4.y PATCH 3/4] ARM: OMAP2+: Prepare to handle dra7 timer wrap issue
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [Backport for linux-5.4.y PATCH 2/4] ARM: OMAP2+: Prepare timer code to backport dra7 timer wrap errata i940
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [Backport for linux-5.4.y PATCH 1/4] ARM: OMAP: replace setup_irq() by request_irq()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 3/3] Devicetree changes for omaps for v5.14
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 2/3] Defconfig changes for omaps for v5.14
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 1/3] Cleanup for omaps for v5.14
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] PM and build warning fixes for omaps
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] SATA regresion fix for TI dra7 for v5.13
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: musb: Check devctl status again for a spurious session request
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Regulators not working
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Regression with 6cfcd5563b4f on BeagleBoard Rev C2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH -next] ASoC: ti: omap-mcbsp: use DEVICE_ATTR_RW macro
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2 4/4] dt-bindings: gpio: pcf857x: Convert to json-schema
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v2 3/4] x86: ce4100: Replace "ti,pcf8575" by "nxp,pcf8575"
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RESEND PATCH v2 00/13] Simplify + drop board file support for Samsung PMIC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: i2c: ce4100: Replace "ti,pcf8575" by "nxp,pcf8575"
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2 2/4] ARM: dts: dra7x-evm: Drop "ti,pcf8575"
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2 3/4] x86: ce4100: Replace "ti,pcf8575" by "nxp,pcf8575"
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2 0/4] pcf857x: DTS fixes and DT binding to json-schema conversion
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: am33xx: Drop interrupt property from ecap nodes
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 2/3] ARM: dts: ti: Fix node name for all ecap dt nodes
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 1/3] ARM: dts: ti: Drop usage of ti,am33xx-ecap from DT nodes
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v3] arm: dts: ti: drop usage of redundant compatible
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 2/2] dt-bindings: pwm: pwm-tiecap: Add compatible string for AM64 SoC
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 1/2] dt-bindings: pwm: pwm-tiecap: Convert to json schema
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 0/2] dt-bindings: pwm: pwm-tiecap: Convert to json schema
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 3/3] ARM: dts: am33xx: Drop interrupt property from ecap nodes
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 2/3] ARM: dts: ti: Fix node name for all ecap dt nodes
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 1/3] ARM: dts: ti: Drop usage of ti,am33xx-ecap from DT nodes
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 0/3] ARM: dts: ti: Fix DT warnings for ecap nodes
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: pwm: pwm-tiehrpwm: Add compatible string for AM64 SoC
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH v3 1/2] dt-bindings: pwm: pwm-tiehrpwm: Convert to json schema
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH v3 0/2] dt-bindings: pwm: pwm-tiehrpwm: Convert to json schema
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH v3] arm: dts: ti: drop usage of redundant compatible
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH 1/4] arm: dts: ti: drop usage of redundant compatible
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: Regulators not working
  • From: Mighty M <mightymb17@xxxxxxxxx>
• Re: Ethernet padding - ti_cpsw vs DSA tail tag
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: Ethernet padding - ti_cpsw vs DSA tail tag
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH -next] bus: ti-sysc: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
  • From: Zhang Qilong <zhangqilong3@xxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Ethernet padding - ti_cpsw vs DSA tail tag
  • From: Ben Hutchings <ben.hutchings@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] arm: dts: ti: drop usage of redundant compatible
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 2/4] dt-bindings: pwm: tiehrpwm: Make clock and clock-names as required properties
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 1/4] arm: dts: ti: drop usage of redundant compatible
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v2] PCI: dra7xx: Fix reset behaviour
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v2 3/4] PCI: dra7xx: Remove unused include
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v2 4/4] PCI: dra7xx: Get an optional clock
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v2 2/4] PCI: dra7xx: Make it a kernel module
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/4] PCI: dwc: Export more symbols to allow modular drivers
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v2 0/4] PCI: dwc: pci-dra7xx: miscellaneous improvements
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH -next] ASoC: ti: omap-mcbsp: use DEVICE_ATTR_RW macro
  • From: Péter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH] dmaengine: ti: omap-dma: Skip pointless cpu_pm context restore on errors
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: mailbox: Convert omap-mailbox.txt binding to YAML
  • From: Suman Anna <s-anna@xxxxxx>
• Regression with 6cfcd5563b4f on BeagleBoard Rev C2
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: [PATCH -next] ASoC: ti: omap-mcbsp: use DEVICE_ATTR_RW macro
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: [PATCH] usb: musb: Check devctl status again for a spurious session request
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v1] kbuild: Disable compile testing if HAVE_LEGACY_CLK enabled
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v1] kbuild: Disable compile testing if HAVE_LEGACY_CLK enabled
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] serial: 8250: 8250_omap: Fix possible interrupt storm
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH -next] ASoC: ti: omap-mcbsp: use DEVICE_ATTR_RW macro
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH] serial: 8250: 8250_omap: Fix possible interrupt storm
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH] usb: musb: Check devctl status again for a spurious session request
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] serial: 8250: 8250_omap: Fix possible interrupt storm
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2 4/4] dt-bindings: pwm: pwm-tiehrpwm: Add compatible string for AM64 SoC
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH v2 3/4] dt-bindings: pwm: pwm-tiehrpwm: Convert to json schema
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH v2 2/4] dt-bindings: pwm: tiehrpwm: Make clock and clock-names as required properties
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH v2 1/4] arm: dts: ti: drop usage of redundant compatible
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH v2 0/4] dt-bindings: pwm: pwm-tiehrpwm: Convert to json schema
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH] pinctrl: Fix kernel-doc
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] usb: musb: Check devctl status again for a spurious session request
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Regulators not working
  • From: Mighty M <mightymb17@xxxxxxxxx>
• [PATCH] dt-bindings: serial: Move omap-serial.txt to YAML schema
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH 3/3] dt-bindings: gpio: pcf857x: Convert to json-schema
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: gpio: pcf857x: Convert to json-schema
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] Cleanup OMAP Mailbox nodes for YAML binding
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] ARM: dts: ti: fix ti,no-reset-on-init usage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/5] dt-bindings: gpio: omap: Convert to json-schema
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3] ARM: dts: dra7: Fix duplicate USB4 target module node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3] ARM: dts: dra7: Fix duplicate USB4 target module node
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v3] ARM: dts: dra7: Fix duplicate USB4 target module node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v3] ARM: dts: dra7: Fix duplicate USB4 target module node
  • From: Gowtham Tammana <g-tammana@xxxxxx>
• RE: [PATCH v2] ARM: dts: dra7: Fix duplicate USB4 device node
  • From: "Tammana, Gowtham" <g-tammana@xxxxxx>
• Re: [PATCH v2] ARM: dts: dra7: Fix duplicate USB4 device node
  • From: Suman Anna <s-anna@xxxxxx>
• RE: [EXTERNAL] Re: [PATCH] ARM: dts: DRA7x: Fix duplicate USB4 device node
  • From: "Tammana, Gowtham" <g-tammana@xxxxxx>
• [PATCH v2] ARM: dts: dra7: Fix duplicate USB4 device node
  • From: Gowtham Tammana <g-tammana@xxxxxx>
• Re: [RESEND PATCH v2 07/13] mfd: twl: Correct kerneldoc
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RESEND PATCH v2 06/13] mfd: wm831x: Correct kerneldoc
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [RESEND PATCH v2 06/13] mfd: wm831x: Correct kerneldoc
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [RESEND PATCH v2 05/13] mfd: sec: Simplify getting of_device_id match data
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [RESEND PATCH v2 07/13] mfd: twl: Correct kerneldoc
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [RESEND PATCH v2 10/13] mfd: sec: Remove unused device_type in platform data
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [RESEND PATCH v2 08/13] mfd: sec: Drop support for board files and require devicetree
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [RESEND PATCH v2 11/13] mfd: sec: Remove unused irq_base in platform data
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [RESEND PATCH v2 12/13] mfd: sec: Enable wakeup from suspend via devicetree property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [RESEND PATCH v2 13/13] mfd: sec: Remove unused platform data members
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [RESEND PATCH v2 09/13] mfd: sec: Remove unused cfg_pmic_irq in platform data
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [RESEND PATCH v2 04/13] mfd: da9062: Simplify getting of_device_id match data
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [RESEND PATCH v2 03/13] mfd: da9052: Simplify getting of_device_id match data
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [RESEND PATCH v2 02/13] mfd: max8998: Simplify getting of_device_id match data
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [RESEND PATCH v2 01/13] mfd: max8997: Simplify getting of_device_id match data
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [RESEND PATCH v2 00/13] Simplify + drop board file support for Samsung PMIC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 00/10] Rid W=1 warnings from Bus
  • From: Laurentiu Tudor <laurentiu.tudor@xxxxxxx>
• [PATCH 2/2] ARM: dts: am437x-l4: Drop ti,omap2-uart entry from UART nodes
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH 1/2] ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>