We need to retrieve the number of wires used by the "secondary" device
(the touchscreen or the magnetic reader). Let's rename tsc_wires to
become tscmag_wires to clarify the fact that this variable can be used
in both situations.
Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
---
drivers/mfd/ti_am335x_tscadc.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 2fdee0f4814f..24fcc70893f9 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -122,7 +122,7 @@ static int ti_tscadc_probe(struct platform_device *pdev)
const __be32 *cur;
u32 val;
int err;
- int tsc_wires = 0, adc_channels = 0, cell_idx = 0, total_channels;
+ int tscmag_wires = 0, adc_channels = 0, cell_idx = 0, total_channels;
int readouts = 0;
/* Allocate memory for device */
@@ -140,7 +140,7 @@ static int ti_tscadc_probe(struct platform_device *pdev)
tscadc->data = of_device_get_match_data(&pdev->dev);
node = of_get_child_by_name(pdev->dev.of_node, "tsc");
- of_property_read_u32(node, "ti,wires", &tsc_wires);
+ of_property_read_u32(node, "ti,wires", &tscmag_wires);
of_property_read_u32(node, "ti,coordiante-readouts", &readouts);
of_node_put(node);
@@ -157,7 +157,7 @@ static int ti_tscadc_probe(struct platform_device *pdev)
of_node_put(node);
- total_channels = tsc_wires + adc_channels;
+ total_channels = tscmag_wires + adc_channels;
if (total_channels > 8) {
dev_err(&pdev->dev, "Number of i/p channels more than 8\n");
return -EINVAL;
@@ -221,9 +221,9 @@ static int ti_tscadc_probe(struct platform_device *pdev)
/* Set the control register bits */
tscadc->ctrl = CNTRLREG_TSC_STEPCONFIGWRT | CNTRLREG_STEPID;
- if (tsc_wires > 0) {
+ if (tscmag_wires > 0) {
tscadc->ctrl |= CNTRLREG_TSC_ENB;
- if (tsc_wires == 5)
+ if (tscmag_wires == 5)
tscadc->ctrl |= CNTRLREG_TSC_5WIRE;
else
tscadc->ctrl |= CNTRLREG_TSC_4WIRE;
@@ -236,7 +236,7 @@ static int ti_tscadc_probe(struct platform_device *pdev)
regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl | CNTRLREG_SSENB);
/* TSC Cell */
- if (tsc_wires > 0) {
+ if (tscmag_wires > 0) {
cell = &tscadc->cells[cell_idx++];
cell->name = tscadc->data->name_tscmag;
cell->of_compatible = tscadc->data->compat_tscmag;
--
2.27.0
