On Thu, 2 Sep 2021 23:51:26 +0200
Miquel Raynal <miquel.raynal@xxxxxxxxxxx> wrote:
> While the register list (and names) between ADC0 and ADC1 are pretty
> close, the bits inside changed a little bit. To avoid any future
> confusion, let's add the TSC prefix when some bits are in a register
> that is common to both revisions of the ADC, but are specific to the
> am33xx hardware.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Given all I suggested last time was things you've done in earlier patches now
this LGTM
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> ---
> drivers/mfd/ti_am335x_tscadc.c | 10 +++++-----
> include/linux/mfd/ti_am335x_tscadc.h | 16 ++++++++--------
> 2 files changed, 13 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
> index eba5fba8cf78..2fdee0f4814f 100644
> --- a/drivers/mfd/ti_am335x_tscadc.c
> +++ b/drivers/mfd/ti_am335x_tscadc.c
> @@ -220,13 +220,13 @@ static int ti_tscadc_probe(struct platform_device *pdev)
> regmap_write(tscadc->regmap, REG_CLKDIV, tscadc->clk_div);
>
> /* Set the control register bits */
> - tscadc->ctrl = CNTRLREG_STEPCONFIGWRT | CNTRLREG_STEPID;
> + tscadc->ctrl = CNTRLREG_TSC_STEPCONFIGWRT | CNTRLREG_STEPID;
> if (tsc_wires > 0) {
> - tscadc->ctrl |= CNTRLREG_TSCENB;
> + tscadc->ctrl |= CNTRLREG_TSC_ENB;
> if (tsc_wires == 5)
> - tscadc->ctrl |= CNTRLREG_5WIRE;
> + tscadc->ctrl |= CNTRLREG_TSC_5WIRE;
> else
> - tscadc->ctrl |= CNTRLREG_4WIRE;
> + tscadc->ctrl |= CNTRLREG_TSC_4WIRE;
> }
> regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
>
> @@ -326,7 +326,7 @@ static const struct ti_tscadc_data tscdata = {
> .compat_tscmag = "ti,am3359-tsc",
> .name_adc = "TI-am335x-adc",
> .compat_adc = "ti,am3359-adc",
> - .target_clk_rate = ADC_CLK,
> + .target_clk_rate = TSC_ADC_CLK,
> };
>
> static const struct of_device_id ti_tscadc_dt_ids[] = {
> diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
> index 271b5aefc474..29d3195b0193 100644
> --- a/include/linux/mfd/ti_am335x_tscadc.h
> +++ b/include/linux/mfd/ti_am335x_tscadc.h
> @@ -113,14 +113,14 @@
> /* Control register */
> #define CNTRLREG_SSENB BIT(0)
> #define CNTRLREG_STEPID BIT(1)
> -#define CNTRLREG_STEPCONFIGWRT BIT(2)
> +#define CNTRLREG_TSC_STEPCONFIGWRT BIT(2)
> #define CNTRLREG_POWERDOWN BIT(4)
> -#define CNTRLREG_AFE_CTRL_MASK GENMASK(6, 5)
> -#define CNTRLREG_AFE_CTRL(val) FIELD_PREP(CNTRLREG_AFE_CTRL_MASK, (val))
> -#define CNTRLREG_4WIRE CNTRLREG_AFE_CTRL(1)
> -#define CNTRLREG_5WIRE CNTRLREG_AFE_CTRL(2)
> -#define CNTRLREG_8WIRE CNTRLREG_AFE_CTRL(3)
> -#define CNTRLREG_TSCENB BIT(7)
> +#define CNTRLREG_TSC_AFE_CTRL_MASK GENMASK(6, 5)
> +#define CNTRLREG_TSC_AFE_CTRL(val) FIELD_PREP(CNTRLREG_TSC_AFE_CTRL_MASK, (val))
> +#define CNTRLREG_TSC_4WIRE CNTRLREG_TSC_AFE_CTRL(1)
> +#define CNTRLREG_TSC_5WIRE CNTRLREG_TSC_AFE_CTRL(2)
> +#define CNTRLREG_TSC_8WIRE CNTRLREG_TSC_AFE_CTRL(3)
> +#define CNTRLREG_TSC_ENB BIT(7)
>
> /* FIFO READ Register */
> #define FIFOREAD_DATA_MASK GENMASK(11, 0)
> @@ -134,7 +134,7 @@
> #define SEQ_STATUS BIT(5)
> #define CHARGE_STEP 0x11
>
> -#define ADC_CLK 3000000
> +#define TSC_ADC_CLK 3000000
> #define TOTAL_STEPS 16
> #define TOTAL_CHANNELS 8
> #define FIFO1_THRESHOLD 19
