From: Grygorii Strashko <grygorii.strashko@xxxxxx>
[ Upstream commit bd551acdde3ad40da1a97391abd6e0db7852bf66 ]
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.
Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm/boot/dts/am437x-gp-evm.dts | 4 ++--
arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 8a17eca2bc97..7511b10182af 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -698,7 +698,7 @@ &gpio0 {
pinctrl-0 = <&gpio0_pins>;
status = "okay";
- p23 {
+ sel-emmc-nand-hog {
gpio-hog;
gpios = <23 GPIO_ACTIVE_HIGH>;
/* SelEMMCorNAND selects between eMMC and NAND:
@@ -731,7 +731,7 @@ &gpio5 {
status = "okay";
ti,no-reset-on-init;
- p8 {
+ sel-lcd-hdmi-hog {
/*
* SelLCDorHDMI selects between display and audio paths:
* Low: HDMI display with audio via HDMI
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index b6950eee550b..9e6d0888f115 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -708,7 +708,7 @@ &gpio2 {
pinctrl-0 = <&display_mux_pins>;
status = "okay";
- p1 {
+ sel-lcd-hdmi-hog {
/*
* SelLCDorHDMI selects between display and audio paths:
* Low: HDMI display with audio via HDMI
--
2.30.2
