[PATCH v2 33/46] mfd: ti_am335x_tscadc: Move control register configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The datasheet states that most of the configuration should be set in the
control register in the first place, before actually enabling the
hardware. So far only half of the configuration was made in the first
step, which does not make really sense and would complicating the code
when introducing support for the am437x hardware.

Let's move that register write a bit below to enclose more configuration.

Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
 drivers/mfd/ti_am335x_tscadc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 29ada9da8826..a0db3e4ff265 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -239,6 +239,8 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	}
 	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
 
+	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
+
 	tscadc_idle_config(tscadc);
 
 	/* Enable the TSC module enable bit */
-- 
2.27.0




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux