Linux Kernel I2C Bus Layer
[Prev Page][Next Page]
- Re: [PATCH RESEND] i2c: designware: Add device HID for Hygon I2C controller, (continued)
- [PATCH v2] hwmon/pmbus: use simple i2c probe function,
Stephen Kitt
- [PATCH] hwmon/pmbus: use simple i2c probe function,
Stephen Kitt
- [RFC PATCH i2c-tools] tools: i2ctransfer: add check for returned length from driver,
Wolfram Sang
- [PATCH i2c-tools] add BUGS section to manpages,
Wolfram Sang
- [PATCH v2] docs: remove the 2.6 "Upgrading I2C Drivers" guide,
Stephen Kitt
- [PATCH v2] media: ov7740: use SCCB regmap, Raag Jadav
- [PATCH] i2c: mediatek: Fix i2c_spec_values description,
Matthias Brugger
- [PATCH i2c-tools v2] i2ctransfer: add support for I2C_M_RECV_LEN,
Wolfram Sang
- [PATCH i2c-tools] tools: allow to preset TOOLS_CFLAGS and TOOLS_LDFLAGS,
Wolfram Sang
- [PATCH v3 0/4] add i2c support for mt8192,
Qii Wang
- [PATCH] docs: remove the 2.6 "Upgrading I2C Drivers" guide,
Stephen Kitt
- [PATCH 0/4] i2c: core: add generic GPIO bus recovery,
Codrin Ciubotariu
- [PATCH] decode-dimms: Update the list of vendors to Jedec JEP106BB,
Jean Delvare
- [PATCH 1/1] i2c: busses: Add support for atomic transfers in Actions Semi Owl driver,
Cristian Ciocaltea
- [PATCH] i2c: stm32f7: add SMBus-Alert support,
Alain Volmat
- [PATCH v3 0/2] i2c: stm32: add host-notify support via i2c slave,
Alain Volmat
- [PATCH i2c-tools] i2ctransfer: add support for I2C_M_RECV_LEN,
Wolfram Sang
- [PATCH] Documentation: i2c: dev: 'block process call' is supported,
Wolfram Sang
- [RFC PATCH 00/17] Drop uses of pci_read_config_*() return value,
Saheed O. Bolarinwa
- [PATCH] i2c: designware: Add device HID for Hygon I2C controller,
Pu Wen
- [RFC PATCH v6 00/10] Support for Tegra video capture from external sensor,
Sowjanya Komatineni
- [RFC PATCH v6 02/10] media: tegra-video: Enable TPG based on kernel config, Sowjanya Komatineni
- [RFC PATCH v6 01/10] media: tegra-video: Fix channel format alignment, Sowjanya Komatineni
- [RFC PATCH v6 08/10] gpu: host1x: mipi: Keep MIPI clock enabled till calibration is done, Sowjanya Komatineni
- [RFC PATCH v6 10/10] media: tegra-video: Compute settle times based on the clock rate, Sowjanya Komatineni
- [RFC PATCH v6 07/10] media: tegra-video: Add support for selection ioctl ops, Sowjanya Komatineni
- [RFC PATCH v6 09/10] media: tegra-video: Add CSI MIPI pads calibration, Sowjanya Komatineni
- [RFC PATCH v6 06/10] media: tegra-video: Add support for external sensor capture, Sowjanya Komatineni
- [RFC PATCH v6 04/10] dt-bindings: tegra: Update VI and CSI bindings with port info, Sowjanya Komatineni
- [RFC PATCH v6 05/10] media: tegra-video: Separate CSI stream enable and disable implementations, Sowjanya Komatineni
- [RFC PATCH v6 03/10] media: tegra-video: Update format lookup to offset based, Sowjanya Komatineni
- Re: [RFC PATCH v6 00/10] Support for Tegra video capture from external sensor, Wolfram Sang
- [RFC PATCH v2] i2c: Support Smbus 3.0 block sizes up to 255 bytes.,
daniel . stodden
- [PATCH v2 0/4] add i2c support for mt8192,
Qii Wang
- [RFC PATCH] i2c: Support Smbus 3.0 block sizes up to 255 bytes.,
daniel . stodden
- [PATCH AUTOSEL 5.7 17/25] i2c: cadence: Clear HOLD bit at correct time in Rx path, Sasha Levin
- [PATCH AUTOSEL 5.7 16/25] Revert "i2c: cadence: Fix the hold bit setting", Sasha Levin
- [PATCH AUTOSEL 5.4 11/17] Revert "i2c: cadence: Fix the hold bit setting", Sasha Levin
- [PATCH AUTOSEL 4.19 07/10] Revert "i2c: cadence: Fix the hold bit setting", Sasha Levin
- [PATCH AUTOSEL 4.14 07/10] Revert "i2c: cadence: Fix the hold bit setting", Sasha Levin
- [PATCH AUTOSEL 4.4 3/4] Revert "i2c: cadence: Fix the hold bit setting", Sasha Levin
- [PATCH AUTOSEL 4.9 6/7] Revert "i2c: cadence: Fix the hold bit setting", Sasha Levin
- [RFC PATCH v5 00/14] Support for Tegra video capture from external sensor,
Sowjanya Komatineni
- [RFC PATCH v5 02/14] i2c: tegra: Remove NULL pointer check before clk_enable/disable/prepare/unprepare, Sowjanya Komatineni
- [RFC PATCH v5 10/14] media: tegra-video: Add support for external sensor capture, Sowjanya Komatineni
- [RFC PATCH v5 13/14] media: tegra-video: Add CSI MIPI pads calibration, Sowjanya Komatineni
- [RFC PATCH v5 14/14] media: tegra-video: Compute settle times based on the clock rate, Sowjanya Komatineni
- [RFC PATCH v5 12/14] gpu: host1x: mipi: Keep MIPI clock enabled till calibration is done, Sowjanya Komatineni
- [RFC PATCH v5 08/14] media: tegra-video: Update format lookup to offset based, Sowjanya Komatineni
- [RFC PATCH v5 09/14] dt-bindings: tegra: Update VI and CSI bindings with port info, Sowjanya Komatineni
- [RFC PATCH v5 11/14] media: tegra-video: Add support for selection ioctl ops, Sowjanya Komatineni
- [RFC PATCH v5 06/14] media: tegra-video: Fix channel format alignment, Sowjanya Komatineni
- [RFC PATCH v5 07/14] media: tegra-video: Enable TPG based on kernel config, Sowjanya Komatineni
- [RFC PATCH v5 01/14] i2c: tegra: Don't mark VI I2C as IRQ safe runtime PM, Sowjanya Komatineni
- [RFC PATCH v5 05/14] i2c: tegra: Avoid tegra_i2c_init_dma() for Tegra210 vi i2c, Sowjanya Komatineni
- [RFC PATCH v5 04/14] i2c: tegra: Fix runtime resume to re-init VI I2C, Sowjanya Komatineni
- [RFC PATCH v5 03/14] i2c: tegra: Fix the error path in tegra_i2c_runtime_resume, Sowjanya Komatineni
- [PATCH] i2c: rcar: avoid race when unregistering slave,
Wolfram Sang
- i2c block reads > 32 bytes,
Daniel Stodden
- [PATCH 0/2] i2c: slave: improve sanity checks when un-/registering,
Wolfram Sang
- [PATCH] i2c: also convert placeholder function to return errno,
Wolfram Sang
- [PATCH v5 00/16] Allwinner A100 Initial support,
Frank Lee
- [RFC PATCH v4 00/14] Support for Tegra video capture from external sensor,
Sowjanya Komatineni
- [RFC PATCH v4 03/14] i2c: tegra: Fix the error path in tegra_i2c_runtime_resume, Sowjanya Komatineni
- [RFC PATCH v4 02/14] i2c: tegra: Remove NULL pointer check before clk_enable/disable/prepare/unprepare, Sowjanya Komatineni
- [RFC PATCH v4 12/14] gpu: host1x: mipi: Keep MIPI clock enabled till calibration is done, Sowjanya Komatineni
- [RFC PATCH v4 14/14] media: tegra-video: Compute settle times based on the clock rate, Sowjanya Komatineni
- [RFC PATCH v4 11/14] media: tegra-video: Add support for selection ioctl ops, Sowjanya Komatineni
- [RFC PATCH v4 13/14] media: tegra-video: Add CSI MIPI pads calibration, Sowjanya Komatineni
- [RFC PATCH v4 10/14] media: tegra-video: Add support for external sensor capture, Sowjanya Komatineni
- [RFC PATCH v4 07/14] media: tegra-video: Enable TPG based on kernel config, Sowjanya Komatineni
- [RFC PATCH v4 09/14] dt-bindings: tegra: Update VI and CSI bindings with port info, Sowjanya Komatineni
- [RFC PATCH v4 08/14] media: tegra-video: Update format lookup to offset based, Sowjanya Komatineni
- [RFC PATCH v4 05/14] i2c: tegra: Avoid tegra_i2c_init_dma() for Tegra210 vi i2c, Sowjanya Komatineni
- [RFC PATCH v4 04/14] i2c: tegra: Fix runtime resume to re-init VI I2C, Sowjanya Komatineni
- [RFC PATCH v4 06/14] media: tegra-video: Fix channel format alignment, Sowjanya Komatineni
- [RFC PATCH v4 01/14] i2c: tegra: Don't mark VI I2C as IRQ safe runtime PM, Sowjanya Komatineni
- Re: [RFC PATCH v4 00/14] Support for Tegra video capture from external sensor, Hans Verkuil
- [PATCH 1/7] i2c: tegra: remove dead code,
Krishna Yarlagadda
- [PATCH v2] i2c: i2c-qcom-geni: Fix DMA transfer race,
Douglas Anderson
- [PATCH v1] i2c: ismt: Describe parameters in kernel doc,
Andy Shevchenko
- [PATCH 0/4] add i2c support for mt8192,
Qii Wang
- [PATCH][next] i2c: synquacer: Use fallthrough pseudo-keyword, Gustavo A. R. Silva
- [PATCH][next] i2c: designware: Use fallthrough pseudo-keyword,
Gustavo A. R. Silva
- [PATCH][next] i2c: scx200_acb: Use fallthrough pseudo-keyword, Gustavo A. R. Silva
- [PATCH v2][next] i2c: slave-eeprom: Use fallthrough pseudo-keyword, Gustavo A. R. Silva
- [PATCH v2][next] i2c: mv64xxx: Use fallthrough pseudo-keyword, Gustavo A. R. Silva
- [PATCH v2][next] i2c: aspeed: Use fallthrough pseudo-keyword, Gustavo A. R. Silva
- [PATCH v2][next] i2c: busses: Use fallthrough pseudo-keyword, Gustavo A. R. Silva
- [PATCH v2][next] i2c: digicolor: Use fallthrough pseudo-keyword, Gustavo A. R. Silva
- [PATCH] i2c: fix WARNING in pvr2_i2c_core_done,
B K Karthik
- [PATCH] i2c: i2c-qcom-geni: Fix DMA transfer race,
Douglas Anderson
- [PATCH v1] i2c: eg20t: use generic power management,
Vaibhav Gupta
- [PATCH for v5.9] i2c: Replace HTTP links with HTTPS ones,
Alexander A. Klimov
- [PATCH] i2c: iproc: fix race between client unreg and isr,
Dhananjay Phadke
- [RFC PATCH 00/35] Move all PCIBIOS* definitions into arch/x86,
Saheed Olayemi Bolarinwa
- [PATCH] I2C: linux/i2c.h: drop duplicated word in a comment,
Randy Dunlap
- [PATCH] i2c: bcm2835: Replace HTTP links with HTTPS ones,
Alexander A. Klimov
- Re: [PATCH v4 1/2] drivers: provide devm_platform_request_irq(), Markus Elfring
- [PATCH v4 2/2] i2c: busses: convert to devm_platform_request_irq(),
Dejin Zheng
- [PATCH v4 0/2] drivers: provide devm_platform_request_irq(),
Dejin Zheng
- [PATCH] dt-bindings: i2c-gpio: Use 'deprecated' keyword on deprecated properties,
Rob Herring
- [PATCH v2 0/2] add PEC support on slave side,
Rayagonda Kokatanur
- [PATCH][next] i2c: busses: Use fallthrough pseudo-keyword,
Gustavo A. R. Silva
- [PATCH][next] i2c: digicolor: Use fallthrough pseudo-keyword,
Gustavo A. R. Silva
- [PATCH][next] i2c: slave-eeprom: Use fallthrough pseudo-keyword, Gustavo A. R. Silva
- [PATCH][next] i2c: mv64xxx: Use fallthrough pseudo-keyword,
Gustavo A. R. Silva
- [PATCH][next] i2c: aspeed: Use fallthrough pseudo-keyword,
Gustavo A. R. Silva
- [PATCH 00/20] Add support for SATA/PCIe/USB2[3]/VIN/CSI on R8A774E1,
Lad Prabhakar
- [PATCH 02/20] arm64: dts: renesas: r8a774e1: Add PCIe device nodes, Lad Prabhakar
- [PATCH 03/20] dt-bindings: ata: renesas,rcar-sata: Add r8a774e1 support, Lad Prabhakar
- [PATCH 05/20] dt-bindings: phy: renesas,usb2-phy: Add r8a774e1 support, Lad Prabhakar
- [PATCH 14/20] dt-bindings: sound: renesas,rsnd: Document r8a774e1 bindings, Lad Prabhakar
- [PATCH 16/20] dt-bindings: media: renesas,csi2: Add R8A774E1 support, Lad Prabhakar
- [PATCH 17/20] dt-bindings: media: renesas,vin: Add R8A774E1 support, Lad Prabhakar
- [PATCH 18/20] media: rcar-csi2: Enable support for R8A774E1, Lad Prabhakar
- [PATCH 19/20] media: rcar-vin: Enable support for R8A774E1, Lad Prabhakar
- [PATCH 20/20] arm64: dts: renesas: r8a774e1: Add VIN and CSI-2 nodes, Lad Prabhakar
- [PATCH 15/20] arm64: dts: renesas: r8a774e1: Add audio support, Lad Prabhakar
- [PATCH 07/20] dt-bindings: usb: renesas,usb3-peri: Document r8a774e1 support, Lad Prabhakar
- [PATCH 08/20] dt-bindings: usb: usb-xhci: Document r8a774e1 support, Lad Prabhakar
- [PATCH 09/20] dt-bindings: phy: renesas,usb3-phy: Add r8a774e1 support, Lad Prabhakar
- [PATCH 10/20] arm64: dts: renesas: r8a774e1: Add USB3.0 device nodes, Lad Prabhakar
- [PATCH 11/20] dt-bindings: usb: renesas,usbhs: Add r8a774e1 support, Lad Prabhakar
- Re: [PATCH 11/20] dt-bindings: usb: renesas,usbhs: Add r8a774e1 support, Rob Herring
- Re: [PATCH 11/20] dt-bindings: usb: renesas,usbhs: Add r8a774e1 support, Geert Uytterhoeven
- Re: [PATCH 11/20] dt-bindings: usb: renesas,usbhs: Add r8a774e1 support, Lad, Prabhakar
- Re: [PATCH 11/20] dt-bindings: usb: renesas,usbhs: Add r8a774e1 support, Lad, Prabhakar
- [PATCH 12/20] dt-bindings: dma: renesas,usb-dmac: Add binding for r8a774e1, Lad Prabhakar
- [PATCH 13/20] arm64: dts: renesas: r8a774e1: Add USB-DMAC and HSUSB device nodes, Lad Prabhakar
- [PATCH 06/20] arm64: dts: renesas: r8a774e1: Add USB2.0 phy and host (EHCI/OHCI) device nodes, Lad Prabhakar
- [PATCH 04/20] arm64: dts: renesas: r8a774e1: Add SATA controller node, Lad Prabhakar
- [PATCH 01/20] dt-bindings: pci: rcar-pci: Add device tree support for r8a774e1, Lad Prabhakar
- Re: [PATCH 00/20] Add support for SATA/PCIe/USB2[3]/VIN/CSI on R8A774E1, Mark Brown
- Re: [PATCH 00/20] Add support for SATA/PCIe/USB2[3]/VIN/CSI on R8A774E1, Wolfram Sang
- [PATCH v1] i2c: nvidia-gpu: Use put_unaligned_be24(),
Andy Shevchenko
- [PATCH V1 0/2] add PEC support on slave side,
Rayagonda Kokatanur
- [PATCH] drivers/i2c: Removes 'blacklist' from file,
Paul Schulz
- [PATCH 00/20] Add support for [H]SCIF/TMU/CMT/THS/SDHI/MSIOF/CAN[FD]/I2C/IIC/RWDT on R8A774E1,
Lad Prabhakar
- [PATCH 02/20] dt-bindings: thermal: rcar-gen3-thermal: Add r8a774e1 support, Lad Prabhakar
- [PATCH 05/20] dt-bindings: timer: renesas,cmt: Document r8a774e1 CMT support, Lad Prabhakar
- [PATCH 14/20] dt-bindings: spi: renesas,sh-msiof: Add r8a774e1 support, Lad Prabhakar
- [PATCH 19/20] dt-bindings: can: rcar_canfd: Document r8a774e1 support, Lad Prabhakar
- [PATCH 20/20] arm64: dts: renesas: r8a774e1: Add CAN[FD] support, Lad Prabhakar
- [PATCH 18/20] dt-bindings: can: rcar_can: Document r8a774e1 support, Lad Prabhakar
- [PATCH 17/20] arm64: dts: renesas: r8a774e1: Add RWDT node, Lad Prabhakar
- [PATCH 16/20] dt-bindings: watchdog: renesas,wdt: Document r8a774e1 support, Lad Prabhakar
- [PATCH 15/20] arm64: dts: renesas: r8a774e1: Add MSIOF nodes, Lad Prabhakar
- [PATCH 12/20] dt-bindings: i2c: renesas,iic: Document r8a774e1 support, Lad Prabhakar
- [PATCH 13/20] arm64: dts: renesas: r8a774e1: Add I2C and IIC-DVFS support, Lad Prabhakar
- [PATCH 11/20] dt-bindings: i2c: renesas,i2c: Document r8a774e1 support, Lad Prabhakar
- [PATCH 10/20] arm64: dts: renesas: r8a774e1: Add SDHI nodes, Lad Prabhakar
- [PATCH 09/20] arm64: dts: renesas: r8a774e1: Add SCIF and HSCIF nodes, Lad Prabhakar
- [PATCH 08/20] arm64: dts: renesas: r8a774e1: Add TMU device nodes, Lad Prabhakar
- [PATCH 07/20] dt-bindings: timer: renesas,tmu: Document r8a774e1 bindings, Lad Prabhakar
- [PATCH 06/20] arm64: dts: renesas: r8a774e1: Add CMT device nodes, Lad Prabhakar
- [PATCH 04/20] arm64: dts: renesas: r8a774e1: Add RZ/G2H thermal support, Lad Prabhakar
- [PATCH 03/20] thermal: rcar_gen3_thermal: Add r8a774e1 support, Lad Prabhakar
- [PATCH 01/20] arm64: dts: renesas: r8a774e1: Add operating points, Lad Prabhakar
- Re: [PATCH 00/20] Add support for [H]SCIF/TMU/CMT/THS/SDHI/MSIOF/CAN[FD]/I2C/IIC/RWDT on R8A774E1, Mark Brown
- [RFC PATCH v3 00/18] Support for Tegra video capture from external sensor,
Sowjanya Komatineni
- [RFC PATCH v3 07/18] i2c: tegra: Avoid tegra_i2c_init_dma() for Tegra210 vi i2c, Sowjanya Komatineni
- [RFC PATCH v3 10/18] media: tegra-video: Update format lookup to offset based, Sowjanya Komatineni
- [RFC PATCH v3 09/18] media: tegra-video: Enable TPG based on kernel config, Sowjanya Komatineni
- [RFC PATCH v3 17/18] media: tegra-video: Add CSI MIPI pads calibration, Sowjanya Komatineni
- [RFC PATCH v3 18/18] media: tegra-video: Compute settle times based on the clock rate, Sowjanya Komatineni
- [RFC PATCH v3 05/18] i2c: tegra: Fix the error path in tegra_i2c_runtime_resume, Sowjanya Komatineni
- [RFC PATCH v3 08/18] media: tegra-video: Fix channel format alignment, Sowjanya Komatineni
- [RFC PATCH v3 13/18] media: tegra-video: Add support for selection ioctl ops, Sowjanya Komatineni
- [RFC PATCH v3 14/18] gpu: host1x: mipi: Update tegra_mipi_request() to be node based, Sowjanya Komatineni
- [RFC PATCH v3 16/18] gpu: host1x: mipi: Split tegra_mipi_calibrate and tegra_mipi_wait, Sowjanya Komatineni
- [RFC PATCH v3 15/18] gpu: host1x: mipi: Use readl_relaxed_poll_timeout in tegra_mipi_wait, Sowjanya Komatineni
- [RFC PATCH v3 12/18] media: tegra-video: Add support for external sensor capture, Sowjanya Komatineni
- [RFC PATCH v3 11/18] dt-bindings: tegra: Update VI and CSI bindings with port info, Sowjanya Komatineni
- [RFC PATCH v3 06/18] i2c: tegra: Fix runtime resume to re-init VI I2C, Sowjanya Komatineni
- [RFC PATCH v3 03/18] i2c: tegra: Don't mark VI I2C as IRQ safe runtime PM, Sowjanya Komatineni
- [RFC PATCH v3 01/18] dt-bindings: i2c: tegra: Document Tegra210 VI I2C clocks and power-domains, Sowjanya Komatineni
- [RFC PATCH v3 02/18] arm64: tegra: Add missing clocks and power-domains to Tegra210 VI I2C, Sowjanya Komatineni
- [RFC PATCH v3 04/18] i2c: tegra: Remove NULL pointer check before clk_enable/disable/prepare/unprepare, Sowjanya Komatineni
- Re: [RFC PATCH v3 00/18] Support for Tegra video capture from external sensor, Hans Verkuil
- [PATCH v4 00/16] Allwinner A100 Initial support,
Frank Lee
- [RFC PATCH 14/35] i2c/busses: Change PCIBIOS_SUCCESSFUL to 0,
Saheed O. Bolarinwa
- [RFC PATCH 15/35] i2c/busses: Tidy Success/Failure checks,
Saheed O. Bolarinwa
- [PATCH] HID: mcp2221: Replace HTTP links with HTTPS ones,
Alexander A. Klimov
- [PATCH v3 13/16] dt-bindings: i2c: mv64xxx: Add compatible for the A100 i2c node.,
Frank Lee
- [PATCH] MAINTAINERS: i2c: at91: handover maintenance to Codrin Ciubotariu,
Ludovic Desroches
- [PATCH AUTOSEL 4.19 8/8] i2c: eg20t: Load module automatically if ID matches, Sasha Levin
- [PATCH AUTOSEL 5.4 16/16] i2c: eg20t: Load module automatically if ID matches, Sasha Levin
- [PATCH AUTOSEL 4.14 5/5] i2c: eg20t: Load module automatically if ID matches, Sasha Levin
- [PATCH AUTOSEL 4.9] i2c: eg20t: Load module automatically if ID matches, Sasha Levin
- [PATCH AUTOSEL 4.4] i2c: eg20t: Load module automatically if ID matches, Sasha Levin
- Re: [PATCH v3 12/16] dt-bindings: irq: sun7i-nmi: Add binding for A100's NMI controller, Lee Jones
- [PATCH v3 00/16] Allwinner A100 Initial support,
Frank Lee
- [PATCH v3 03/16] dt-bindings: pinctrl: sunxi: Add A100 pinctrl bindings, Frank Lee
- [PATCH v3 04/16] dt-bindings: pinctrl: sunxi: make gpio banks supplies required, Frank Lee
- [PATCH v3 06/16] dt-bindings: nvmem: SID: add binding for A100's SID controller, Frank Lee
- [PATCH v3 07/16] dt-bindings: thermal: sun8i: Add binding for A100's THS controller, Frank Lee
- [PATCH v3 08/16] thermal: sun8i: add TEMP_CALIB_MASK for calibration data in sun50i_h6_ths_calibrate, Frank Lee
- [PATCH v3 09/16] thermal: sun8i: Add A100's THS controller support, Frank Lee
- [PATCH v3 10/16] mfd: axp20x: Allow the AXP803 to be probed by I2C, Frank Lee
- [PATCH v3 05/16] pinctrl: sunxi: add support for the Allwinner A100 pin controller, Frank Lee
- [PATCH v3 02/16] clk: sunxi-ng: add support for the Allwinner A100 CCU, Frank Lee
- [PATCH v3 01/16] dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and R-CCU, Frank Lee
- Re: [PATCH v3 00/16] Allwinner A100 Initial support, Corentin Labbe
- Re: [PATCH v3 00/16] Allwinner A100 Initial support, Maxime Ripard
- [PATCH] i2c: mv64xxx: Add bus error recovery,
Mark Tomlinson
- Two weeks off..,
Wolfram Sang
- [PATCH] i2c: rcar: always clear ICSAR to avoid side effects,
Wolfram Sang
- [PATCH 2/2] i2c: cadence: Clear HOLD bit at correct time in Rx path,
Raviteja Narayanam
- [PATCH 1/2] Revert "i2c: cadence: Fix the hold bit setting",
Raviteja Narayanam
- [PATCH 0/2] i2c: cadence: HOLD bit manipulation,
Raviteja Narayanam
- [PATCH v2 0/2] i2c: stm32: add host-notify support via i2c slave,
Alain Volmat
- Documentation (mm & i2c) questions (doubled words),
Randy Dunlap
- [PATCH 0/2] i2c: stm32: add host-notify support via i2c slave,
Alain Volmat
- [PATCH v6] i2c: designware: platdrv: Set class based on DMI,
Ricardo Ribalda
- [PATCH v5] i2c: designware: platdrv: Set class based on DMI, Ricardo Ribalda
- [PATCH v1] i2c: eg20t: Load module automatically if ID matches,
Andy Shevchenko
- [PATCH v4] i2c: designware: platdrv: Set class based on DMI,
Ricardo Ribalda
- [PATCH v3] i2c: designware: platdrv: Set class based on dmi,
Ricardo Ribalda
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]
