[RFC PATCH v3 15/18] gpu: host1x: mipi: Use readl_relaxed_poll_timeout in tegra_mipi_wait

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use readl_relaxed_poll_timeout() in tegra_mipi_wait() to simplify
the code.

Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
---
 drivers/gpu/host1x/mipi.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/host1x/mipi.c b/drivers/gpu/host1x/mipi.c
index 762d349..259e70c 100644
--- a/drivers/gpu/host1x/mipi.c
+++ b/drivers/gpu/host1x/mipi.c
@@ -21,9 +21,9 @@
  */
 
 #include <linux/clk.h>
-#include <linux/delay.h>
 #include <linux/host1x.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
@@ -295,19 +295,15 @@ EXPORT_SYMBOL(tegra_mipi_disable);
 
 static int tegra_mipi_wait(struct tegra_mipi *mipi)
 {
-	unsigned long timeout = jiffies + msecs_to_jiffies(250);
+	void __iomem *status_reg = mipi->regs + (MIPI_CAL_STATUS << 2);
 	u32 value;
+	int err;
 
-	while (time_before(jiffies, timeout)) {
-		value = tegra_mipi_readl(mipi, MIPI_CAL_STATUS);
-		if ((value & MIPI_CAL_STATUS_ACTIVE) == 0 &&
-		    (value & MIPI_CAL_STATUS_DONE) != 0)
-			return 0;
-
-		usleep_range(10, 50);
-	}
-
-	return -ETIMEDOUT;
+	err = readl_relaxed_poll_timeout(status_reg, value,
+					 !(value & MIPI_CAL_STATUS_ACTIVE) &&
+					 (value & MIPI_CAL_STATUS_DONE), 50,
+					 250000);
+	return err;
 }
 
 int tegra_mipi_calibrate(struct tegra_mipi_device *device)
-- 
2.7.4




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux