Hi Sowjanya,
On 15/07/2020 06:20, Sowjanya Komatineni wrote:
> This series adds support for video capture from external camera sensor to
> Tegra video driver.
>
> Jetson TX1 has camera expansion connector and supports custom camera module
> designed as per TX1 design specification.
>
> This series also enables camera capture support for Jetson Nano which has
> Raspberry PI camera header.
>
> This series is tested with IMX219 camera sensor.
>
> This series include,
>
> VI I2C related fixes
> - Camera sensor programming happens through VI I2C which is on host1x bus.
> - These patches includes device tree and I2C driver fixes for VI I2C.
>
> Tegra video driver updates
> - TPG Vs Non-TPG based on Kconfig
> - Support for external sensor video capture based on device graph from DT.
> - Support for selection ioctl operations
> - Tegra MIPI CSI pads calibration
> - CSI T-CLK and T-HS settle time computation based on clock rates.
>
> Host1x driver updates
> - Adds API to allow creating mipi device for specific device node.
> - Splits MIPI pads calibrate start and waiting for calibration to be done.
>
> Device tree updates
> - Adds camera connector 2V8, 1V8, 1V2 regulator supplies to Jetson TX1 DT.
> - Enabled VI and CSI support in Jetson Nano DT.
I'm doing a bit of stress testing with:
while true; do v4l2-ctl --stream-mmap --stream-count=1; done
and I see that the imx274 has often streaming failures:
[ 172.025144] IMX274 8-001a: s_stream failed
[ 179.025192] IMX274 8-001a: imx274_write_mbreg : i2c bulk write failed, 3132 = 870 (2 bytes)
[ 179.033575] IMX274 8-001a: s_stream failed
[ 226.525378] IMX274 8-001a: imx274_write_mbreg : i2c bulk write failed, 3130 = 878 (2 bytes)
[ 226.533761] IMX274 8-001a: s_stream failed
[ 227.029325] IMX274 8-001a: imx274_write_mbreg : i2c bulk write failed, 30f6 = 107 (2 bytes)
[ 227.037758] IMX274 8-001a: s_stream failed
[ 247.025218] IMX274 8-001a: imx274_write_mbreg : i2c bulk write failed, 30f6 = 107 (2 bytes)
[ 247.033658] IMX274 8-001a: s_stream failed
[ 293.025517] IMX274 8-001a: s_stream failed
[ 309.024727] IMX274 8-001a: imx274_write_mbreg : i2c bulk write failed, 30e0 = 0 (2 bytes)
[ 309.032969] IMX274 8-001a: s_stream failed
[ 309.529506] IMX274 8-001a: imx274_write_mbreg : i2c bulk write failed, 30f8 = 11d2 (3 bytes)
[ 309.538103] IMX274 8-001a: imx274_set_frame_length error = -121
[ 309.544102] IMX274 8-001a: imx274_set_frame_interval error = -121
[ 309.550243] IMX274 8-001a: s_stream failed
[ 314.025561] IMX274 8-001a: s_stream failed
[ 329.025586] IMX274 8-001a: s_stream failed
[ 340.529567] IMX274 8-001a: imx274_write_mbreg : i2c bulk write failed, 303a = f0c (2 bytes)
[ 340.538009] IMX274 8-001a: s_stream failed
[ 347.525627] IMX274 8-001a: imx274_write_mbreg : i2c bulk write failed, 30f6 = 107 (2 bytes)
[ 347.534008] IMX274 8-001a: s_stream failed
[ 365.033640] IMX274 8-001a: s_stream failed
[ 437.525788] IMX274 8-001a: imx274_write_mbreg : i2c bulk write failed, 3038 = c (2 bytes)
[ 437.533997] IMX274 8-001a: s_stream failed
[ 456.029780] IMX274 8-001a: s_stream failed
[ 472.025862] IMX274 8-001a: s_stream failed
[ 498.025861] IMX274 8-001a: s_stream failed
[ 500.025905] IMX274 8-001a: s_stream failed
where v4l2-ctl returns:
VIDIOC_STREAMON returned -1 (Remote I/O error)
I don't see this with the imx219.
I also see this occasionally:
[Fri Jul 17 12:51:42 2020] video4linux video1: failed to run capture start kthread: -4
Something is not stable here.
Regards,
Hans
>
>
> Delta between patch versions:
>
> [v3]: Includes v2 feedback
> - Uses separate helper function for retrieving remote csi subdevice
> and source subdevice.
> - Added check for presence of subdevice ops set/get_selection
> - dropped vb2_queue_release from driver and using
> vb2_video_unregister_device instead of video_unregister_device.
> - video device register should happen in the last after all video
> device related setup is done in the driver. This is being addressed
> in below RFC patch. Once proper implementation of this is available
> will update Tegra video driver to use split APIs and do all setup
> prior to device register. Added this as TODO in the driver.
> https://www.spinics.net/lists/linux-media/msg172761.html
>
> Note:
> Patch-0012 has compilation dependency on
> https://patchwork.kernel.org/patch/11659521/
>
>
> [v2]: Includes below changes based on v1 feedback
> - dt-binding document and the driver update for device graph to use
> separate ports for sink endpoint and source endpoint for csi.
> - Use data-lanes endpoint property for csi.
> - Update tegra_mipi_request() to take device node pointer argument
> rather than adding extra API.
> - Remove checking for clk pointer before clk_disable.
>
>
> Sowjanya Komatineni (18):
> dt-bindings: i2c: tegra: Document Tegra210 VI I2C clocks and
> power-domains
> arm64: tegra: Add missing clocks and power-domains to Tegra210 VI I2C
> i2c: tegra: Don't mark VI I2C as IRQ safe runtime PM
> i2c: tegra: Remove NULL pointer check before
> clk_enable/disable/prepare/unprepare
> i2c: tegra: Fix the error path in tegra_i2c_runtime_resume
> i2c: tegra: Fix runtime resume to re-init VI I2C
> i2c: tegra: Avoid tegra_i2c_init_dma() for Tegra210 vi i2c
> media: tegra-video: Fix channel format alignment
> media: tegra-video: Enable TPG based on kernel config
> media: tegra-video: Update format lookup to offset based
> dt-bindings: tegra: Update VI and CSI bindings with port info
> media: tegra-video: Add support for external sensor capture
> media: tegra-video: Add support for selection ioctl ops
> gpu: host1x: mipi: Update tegra_mipi_request() to be node based
> gpu: host1x: mipi: Use readl_relaxed_poll_timeout in tegra_mipi_wait
> gpu: host1x: mipi: Split tegra_mipi_calibrate and tegra_mipi_wait
> media: tegra-video: Add CSI MIPI pads calibration
> media: tegra-video: Compute settle times based on the clock rate
>
> .../display/tegra/nvidia,tegra20-host1x.txt | 92 ++-
> .../devicetree/bindings/i2c/nvidia,tegra20-i2c.txt | 19 +-
> arch/arm64/boot/dts/nvidia/tegra210.dtsi | 6 +
> drivers/gpu/drm/tegra/dsi.c | 9 +-
> drivers/gpu/host1x/mipi.c | 37 +-
> drivers/i2c/busses/i2c-tegra.c | 101 +--
> drivers/staging/media/tegra-video/Kconfig | 7 +
> drivers/staging/media/tegra-video/csi.c | 247 ++++++-
> drivers/staging/media/tegra-video/csi.h | 8 +
> drivers/staging/media/tegra-video/tegra210.c | 25 +-
> drivers/staging/media/tegra-video/vi.c | 793 +++++++++++++++++++--
> drivers/staging/media/tegra-video/vi.h | 25 +-
> drivers/staging/media/tegra-video/video.c | 23 +-
> include/linux/host1x.h | 4 +-
> 14 files changed, 1242 insertions(+), 154 deletions(-)
>
