The I2C GPIO bus recovery properties consist of two GPIOS and one extra
pinctrl state ("gpio" or "recovery"). "recovery" pinctrl state is
considered deprecated and "gpio" should be used instead.
Not all are mandatory for recovery.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
---
Changes from RFC:
- "recovery" pinctrl state marked as deprecated; updated description to
reflect this;
Documentation/devicetree/bindings/i2c/i2c.txt | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt
index 438ae123107e..150a67da633d 100644
--- a/Documentation/devicetree/bindings/i2c/i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c.txt
@@ -77,6 +77,16 @@ wants to support one of the below features, it should adapt these bindings.
this information to detect a stalled bus more reliably, for example.
Can not be combined with 'multi-master'.
+- scl-gpios
+ specify the gpio related to SCL pin. Used for GPIO bus recovery.
+
+- sda-gpios
+ specify the gpio related to SDA pin. Optional for GPIO bus recovery.
+
+- pinctrl
+ add extra pinctrl to configure SCL/SDA pins to GPIO function for bus
+ recovery, call it "gpio" or "recovery"(deprecated) state
+
Required properties (per child device)
--------------------------------------
--
2.25.1
