Re: [PATCH 1/4] i2c: mediatek: Add apdma sync in i2c driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2020-07-22 at 20:31 +0800, Qii Wang wrote:
> With the apdma remove hand-shake signal, it need to keep i2c and
> apdma in sync manually.
> 

Looks good to me,

Reviewed-by: Yingjoe Chen <yingjoe.chen@xxxxxxxxxxxx>


Just a reminder, we have another patch 'i2c: mediatek: Add to support
continuous mode' under review now. Please remember to update OFFSET_CON
access code in that patch.

Joe.C



> Signed-off-by: Qii Wang <qii.wang@xxxxxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-mt65xx.c | 23 ++++++++++++++++++++---
>  1 file changed, 20 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
> index deef69e..e6b984a 100644
> --- a/drivers/i2c/busses/i2c-mt65xx.c
> +++ b/drivers/i2c/busses/i2c-mt65xx.c
> @@ -48,6 +48,9 @@
>  
>  #define I2C_DMA_CON_TX			0x0000
>  #define I2C_DMA_CON_RX			0x0001
> +#define I2C_DMA_ASYNC_MODE		0x0004
> +#define I2C_DMA_SKIP_CONFIG		0x0010
> +#define I2C_DMA_DIR_CHANGE		0x0200
>  #define I2C_DMA_START_EN		0x0001
>  #define I2C_DMA_INT_FLAG_NONE		0x0000
>  #define I2C_DMA_CLR_FLAG		0x0000
> @@ -205,6 +208,7 @@ struct mtk_i2c_compatible {
>  	unsigned char timing_adjust: 1;
>  	unsigned char dma_sync: 1;
>  	unsigned char ltiming_adjust: 1;
> +	unsigned char apdma_sync: 1;
>  };
>  
>  struct mtk_i2c_ac_timing {
> @@ -311,6 +315,7 @@ struct i2c_spec_values {
>  	.timing_adjust = 1,
>  	.dma_sync = 0,
>  	.ltiming_adjust = 0,
> +	.apdma_sync = 0,
>  };
>  
>  static const struct mtk_i2c_compatible mt6577_compat = {
> @@ -324,6 +329,7 @@ struct i2c_spec_values {
>  	.timing_adjust = 0,
>  	.dma_sync = 0,
>  	.ltiming_adjust = 0,
> +	.apdma_sync = 0,
>  };
>  
>  static const struct mtk_i2c_compatible mt6589_compat = {
> @@ -337,6 +343,7 @@ struct i2c_spec_values {
>  	.timing_adjust = 0,
>  	.dma_sync = 0,
>  	.ltiming_adjust = 0,
> +	.apdma_sync = 0,
>  };
>  
>  static const struct mtk_i2c_compatible mt7622_compat = {
> @@ -350,6 +357,7 @@ struct i2c_spec_values {
>  	.timing_adjust = 0,
>  	.dma_sync = 0,
>  	.ltiming_adjust = 0,
> +	.apdma_sync = 0,
>  };
>  
>  static const struct mtk_i2c_compatible mt8173_compat = {
> @@ -362,6 +370,7 @@ struct i2c_spec_values {
>  	.timing_adjust = 0,
>  	.dma_sync = 0,
>  	.ltiming_adjust = 0,
> +	.apdma_sync = 0,
>  };
>  
>  static const struct mtk_i2c_compatible mt8183_compat = {
> @@ -375,6 +384,7 @@ struct i2c_spec_values {
>  	.timing_adjust = 1,
>  	.dma_sync = 1,
>  	.ltiming_adjust = 1,
> +	.apdma_sync = 0,
>  };
>  
>  static const struct of_device_id mtk_i2c_of_match[] = {
> @@ -798,6 +808,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
>  	u16 start_reg;
>  	u16 control_reg;
>  	u16 restart_flag = 0;
> +	u16 dma_sync = 0;
>  	u32 reg_4g_mode;
>  	u8 *dma_rd_buf = NULL;
>  	u8 *dma_wr_buf = NULL;
> @@ -851,10 +862,16 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
>  		mtk_i2c_writew(i2c, num, OFFSET_TRANSAC_LEN);
>  	}
>  
> +	if (i2c->dev_comp->apdma_sync) {
> +		dma_sync = I2C_DMA_SKIP_CONFIG | I2C_DMA_ASYNC_MODE;
> +		if (i2c->op == I2C_MASTER_WRRD)
> +			dma_sync |= I2C_DMA_DIR_CHANGE;
> +	}
> +
>  	/* Prepare buffer data to start transfer */
>  	if (i2c->op == I2C_MASTER_RD) {
>  		writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG);
> -		writel(I2C_DMA_CON_RX, i2c->pdmabase + OFFSET_CON);
> +		writel(I2C_DMA_CON_RX | dma_sync, i2c->pdmabase + OFFSET_CON);
>  
>  		dma_rd_buf = i2c_get_dma_safe_msg_buf(msgs, 1);
>  		if (!dma_rd_buf)
> @@ -877,7 +894,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
>  		writel(msgs->len, i2c->pdmabase + OFFSET_RX_LEN);
>  	} else if (i2c->op == I2C_MASTER_WR) {
>  		writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG);
> -		writel(I2C_DMA_CON_TX, i2c->pdmabase + OFFSET_CON);
> +		writel(I2C_DMA_CON_TX | dma_sync, i2c->pdmabase + OFFSET_CON);
>  
>  		dma_wr_buf = i2c_get_dma_safe_msg_buf(msgs, 1);
>  		if (!dma_wr_buf)
> @@ -900,7 +917,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
>  		writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN);
>  	} else {
>  		writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_INT_FLAG);
> -		writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_CON);
> +		writel(I2C_DMA_CLR_FLAG | dma_sync, i2c->pdmabase + OFFSET_CON);
>  
>  		dma_wr_buf = i2c_get_dma_safe_msg_buf(msgs, 1);
>  		if (!dma_wr_buf)





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux