Linux Device-Mapper Development

• Date Index

• Re: [PATCH] libmultipath: fix memory leaks in coalesce_paths, (continued)
  • Re: [PATCH] libmultipath: fix memory leaks in coalesce_paths, Benjamin Marzinski
  • Re: [PATCH] libmultipath: fix memory leaks in coalesce_paths, Martin Wilck
    • Re: [PATCH] libmultipath: fix memory leaks in coalesce_paths, lixiaokeng
• [PATCH] dm integrity: don't use drivers that have CRYPTO_ALG_ALLOCATES_MEMORY, Mikulas Patocka
• use after free with blk_mq_update_nr_requests racing with do_resume/dm_swap_table, Aaron Knister
• [git pull] device mapper changes for 5.10, Mike Snitzer
  • Re: [git pull] device mapper changes for 5.10, pr-tracker-bot
• [ Regressions ] linux next 20201008: blk_update_request: I/O error, dev sda, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0, Naresh Kamboju
  • Re: [ Regressions ] linux next 20201008: blk_update_request: I/O error, dev sda, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0, Naresh Kamboju
    • Re: [ Regressions ] linux next 20201008: blk_update_request: I/O error, dev sda, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0, Jens Axboe
      • Re: [ Regressions ] linux next 20201008: blk_update_request: I/O error, dev sda, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0, Christoph Hellwig
        • Re: [ Regressions ] linux next 20201008: blk_update_request: I/O error, dev sda, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0, Martin K. Petersen
• [PATCH v2] multipath-tools: add info about the historical-service-time path selector to man page, Xose Vazquez Perez
  • Re: [PATCH v2] multipath-tools: add info about the historical-service-time path selector to man page, Martin Wilck
  • Re: [PATCH v2] multipath-tools: add info about the historical-service-time path selector to man page, Gabriel Krisman Bertazi
• [PATCH v1] dm verity: Add support for signature verification with 2nd keyring, Mickaël Salaün
  • Re: [PATCH v1] dm verity: Add support for signature verification with 2nd keyring, Mickaël Salaün
    • Re: [PATCH v1] dm verity: Add support for signature verification with 2nd keyring, Jarkko Sakkinen
      • Re: [PATCH v1] dm verity: Add support for signature verification with 2nd keyring, Mickaël Salaün
• [dm:for-next 20/20] drivers/md/dm.c:2374:19: warning: variable 'map' set but not used, kernel test robot
• [PATCH v3] libmultipath: Allow discovery of USB devices, Frank Meinl
  • Re: [PATCH v3] libmultipath: Allow discovery of USB devices, Martin Wilck
• [RFC] dm: fix imposition of queue_limits in dm_wq_work() thread, Jeffle Xu
  • Re: dm: fix imposition of queue_limits in dm_wq_work() thread, Mike Snitzer
    • Re: dm: fix imposition of queue_limits in dm_wq_work() thread, JeffleXu
    • [PATCH] dm: fix missing imposition of queue_limits from dm_wq_work() thread, Mike Snitzer
• [PATCH v2 0/2] IMA: Add test for dm-crypt measurement, Tushar Sugandhi
  • [PATCH v2 1/2] IMA: generalize key measurement tests, Tushar Sugandhi
    • Re: [PATCH v2 1/2] IMA: generalize key measurement tests, Petr Vorel
      • Re: [PATCH v2 1/2] IMA: generalize key measurement tests, Tushar Sugandhi
        • Re: [PATCH v2 1/2] IMA: generalize key measurement tests, Petr Vorel
  • [PATCH v2 2/2] IMA: Add test for dm-crypt measurement, Tushar Sugandhi
    • Re: [PATCH v2 2/2] IMA: Add test for dm-crypt measurement, Petr Vorel
    • Re: [PATCH v2 2/2] IMA: Add test for dm-crypt measurement, Petr Vorel
• [PATCH v2 1/2] libmultipath: Allow discovery of USB devices, Frank Meinl
  • Re: [PATCH v2 1/2] libmultipath: Allow discovery of USB devices, Martin Wilck
  • [PATCH v2 2/2] multipath: Extend program description in manpage, Frank Meinl
    • Re: [PATCH v2 2/2] multipath: Extend program description in manpage, Martin Wilck
      • Re: [PATCH v2 2/2] multipath: Extend program description in manpage, Frank Meinl
• [PATCH] libmultipath: Extract the LUN number for peripheral, flat, and logical unit address methods, Brian Bunker
  • Re: [PATCH] libmultipath: Extract the LUN number for peripheral, flat, and logical unit address methods, Steffen Maier
    • Re: [PATCH] libmultipath: Extract the LUN number for peripheral, flat, and logical unit address methods, Hannes Reinecke
• Make LUNs higher than 255 more friendly to look at, Brian Bunker
  • Re: Make LUNs higher than 255 more friendly to look at, Bart Van Assche
  • Re: Make LUNs higher than 255 more friendly to look at, Steffen Maier
    • Re: Make LUNs higher than 255 more friendly to look at, Brian Bunker
• [PATCH] dm-raid: stack limits instead of overwriting them., Mikulas Patocka
  • Re: [PATCH] dm-raid: stack limits instead of overwriting them., John Dorminy
    • Re: [PATCH] dm-raid: stack limits instead of overwriting them., Mikulas Patocka
    • Re: dm-raid: stack limits instead of overwriting them., Mike Snitzer
      • Re: dm-raid: stack limits instead of overwriting them., John Dorminy
        • Re: dm-raid: stack limits instead of overwriting them., John Dorminy
          • Re: dm-raid: stack limits instead of overwriting them., Mike Snitzer
          • Re: dm-raid: stack limits instead of overwriting them., S. Baerwolf
  • Re: dm-raid: stack limits instead of overwriting them., Mike Snitzer
    • Re: dm-raid: stack limits instead of overwriting them., Mikulas Patocka
      • Re: dm-raid: stack limits instead of overwriting them., Mikulas Patocka
        • Re: dm-raid: stack limits instead of overwriting them., Mike Snitzer
          • Re: dm-raid: stack limits instead of overwriting them., Mikulas Patocka
            • Re: dm-raid: stack limits instead of overwriting them., Mike Snitzer
• [PATCH] dm-table: set non-zero q->limits.discard_granularity, Mikulas Patocka
  • Re: dm-table: set non-zero q->limits.discard_granularity, Mike Snitzer
    • Re: dm-table: set non-zero q->limits.discard_granularity, Mikulas Patocka
• [PATCH 00/23] libmultipath: improve cleanup on exit, mwilck
  • [PATCH 02/23] multipathd: Fix liburcu memory leak, mwilck
  • [PATCH 06/23] multipathd: move threads destruction into separate function, mwilck
  • [PATCH 05/23] multipathd: make some globals static, mwilck
  • [PATCH 15/23] multipathd: fixup libdm deinitialization, mwilck
  • [PATCH 17/23] multipathd: add cleanup_child() exit handler, mwilck
  • [PATCH 22/23] multipath: fix leaks in check_path_valid(), mwilck
  • [PATCH 08/23] multipathd: move pid destruction into separate function, mwilck
  • [PATCH 03/23] multipathd: move handling of io_err_stat_attr into libmultipath, mwilck
  • [PATCH 01/23] multipathd: uxlsnr: avoid deadlock on exit, mwilck
    • Re: [PATCH 01/23] multipathd: uxlsnr: avoid deadlock on exit, Benjamin Marzinski
      • Re: [PATCH 01/23] multipathd: uxlsnr: avoid deadlock on exit, Martin Wilck
  • [PATCH 09/23] multipathd: close pidfile on exit, mwilck
  • [PATCH 16/23] libmultipath: log_thread_stop(): check if logarea is initialized, mwilck
  • [PATCH 13/23] multipathd: print error message if config can't be loaded, mwilck
  • [PATCH 21/23] mpathpersist: use atexit() for cleanup handlers, mwilck
  • [PATCH 19/23] multipathd: move cleanup_{prio, checkers, foreign} to libmultipath_exit, mwilck
    • Re: [PATCH 19/23] multipathd: move cleanup_{prio, checkers, foreign} to libmultipath_exit, Benjamin Marzinski
      • Re: [PATCH 19/23] multipathd: move cleanup_{prio, checkers, foreign} to libmultipath_exit, Martin Wilck
        • Re: [PATCH 19/23] multipathd: move cleanup_{prio, checkers, foreign} to libmultipath_exit, Benjamin Marzinski
  • [PATCH 07/23] multipathd: move conf destruction into separate function, mwilck
    • Re: [PATCH 07/23] multipathd: move conf destruction into separate function, Benjamin Marzinski
      • Re: [PATCH 07/23] multipathd: move conf destruction into separate function, Martin Wilck
  • [PATCH 04/23] multipathd: move vecs desctruction into cleanup function, mwilck
  • [PATCH 14/23] libmultipath: add libmp_dm_exit(), mwilck
    • Re: [PATCH 14/23] libmultipath: add libmp_dm_exit(), Benjamin Marzinski
  • [PATCH 18/23] libmultipath: fix log_thread startup and teardown, mwilck
    • Re: [PATCH 18/23] libmultipath: fix log_thread startup and teardown, Benjamin Marzinski
      • Re: [PATCH 18/23] libmultipath: fix log_thread startup and teardown, Martin Wilck
  • [PATCH 12/23] multipathd: unwatch_all_dmevents: check if waiter is initialized, mwilck
  • [PATCH 11/23] multipathd: child(): call cleanups in failure case, too, mwilck
  • [PATCH 20/23] multipath: use atexit() for cleanup handlers, mwilck
  • [PATCH 23/23] multipath-tools: mpath-tools.supp: file with valgrind suppressions, mwilck
    • Re: [PATCH 23/23] multipath-tools: mpath-tools.supp: file with valgrind suppressions, Benjamin Marzinski
      • Re: [PATCH 23/23] multipath-tools: mpath-tools.supp: file with valgrind suppressions, Martin Wilck
  • [PATCH 10/23] multipathd: add helper for systemd notification at exit, mwilck
  • Re: [PATCH 00/23] libmultipath: improve cleanup on exit, Benjamin Marzinski
• [PATCH v2 00/21] multipath-tools: shutdown, libdevmapper races, globals, mwilck
  • [PATCH v2 03/21] multipathd: send "STOPPING=1" to systemd on shutdown, mwilck
  • [PATCH v2 06/21] multipathd: generalize and fix wait_for_state_change_if(), mwilck
  • [PATCH v2 02/21] multipathd: avoid sending "READY=1" to systemd on early shutdown, mwilck
  • [PATCH v2 07/21] multipathd: set_config_state(): avoid code duplication, mwilck
  • [PATCH v2 08/21] multipathd: cancel threads early during shutdown, mwilck
  • [PATCH v2 01/21] multipathd: allow shutdown during configure(), mwilck
  • [PATCH v2 05/21] multipathd: use volatile qualifier for running_state, mwilck
  • [PATCH v2 04/21] multipathd: send "RELOADING=1" to systemd on DAEMON_CONFIGURE state, mwilck
  • [PATCH v2 11/21] libmultipath: protect racy libdevmapper calls with a mutex, mwilck
    • Re: [PATCH v2 11/21] libmultipath: protect racy libdevmapper calls with a mutex, Benjamin Marzinski
      • Re: [PATCH v2 11/21] libmultipath: protect racy libdevmapper calls with a mutex, Martin Wilck
  • [PATCH v2 09/21] multipath-tools: don't call dm_lib_release() any more, mwilck
  • [PATCH v2 13/21] libmultipath: provide defaults for {get, put}_multipath_config, mwilck
    • Re: [PATCH v2 13/21] libmultipath: provide defaults for {get, put}_multipath_config, Benjamin Marzinski
      • Re: [PATCH v2 13/21] libmultipath: provide defaults for {get, put}_multipath_config, Martin Wilck
        • Re: [PATCH v2 13/21] libmultipath: provide defaults for {get, put}_multipath_config, Benjamin Marzinski
          • Re: [PATCH v2 13/21] libmultipath: provide defaults for {get, put}_multipath_config, Martin Wilck
            • Re: [PATCH v2 13/21] libmultipath: provide defaults for {get, put}_multipath_config, Benjamin Marzinski
  • [PATCH v2 12/21] libmultipath: constify file argument in config parser, mwilck
  • [PATCH v2 15/21] multipath: use {get_put}_multipath_config from libmultipath, mwilck
  • [PATCH v2 17/21] libmultipath: add udev and logsink symbols, mwilck
    • Re: [PATCH v2 17/21] libmultipath: add udev and logsink symbols, Benjamin Marzinski
      • Re: [PATCH v2 17/21] libmultipath: add udev and logsink symbols, Martin Wilck
  • [PATCH v2 16/21] mpathpersist: use {get, put}_multipath_config() from libmultipath, mwilck
  • [PATCH v2 10/21] libmultipath: devmapper: refactor libdm version determination, mwilck
    • Re: [PATCH v2 10/21] libmultipath: devmapper: refactor libdm version determination, Benjamin Marzinski
  • [PATCH v2 18/21] multipath: remove logsink and udev, mwilck
  • [PATCH v2 14/21] libmpathpersist: allow using libmultipath {get, put}_multipath_config, mwilck
  • [PATCH v2 19/21] libmpathpersist: call libmultipath_{init, exit}(), mwilck
    • Re: [PATCH v2 19/21] libmpathpersist: call libmultipath_{init, exit}(), Benjamin Marzinski
  • [PATCH v2 21/21] multipathd: remove logsink and udev, mwilck
    • Re: [PATCH v2 21/21] multipathd: remove logsink and udev, Benjamin Marzinski
  • [PATCH v2 20/21] mpathpersist: remove logsink and udev, mwilck
    • Re: [PATCH v2 20/21] mpathpersist: remove logsink and udev, Benjamin Marzinski
• [PATCH 00/11] multipath-tools: add linker version scripts, mwilck
  • [PATCH 01/11] libmultipath: find_mpe(): don't match with empty WWID, mwilck
  • [PATCH 07/11] multipath-tools Makefiles: separate rules for .so and man pages, mwilck
  • [PATCH 11/11] libmpathcmd: add linker version script, mwilck
  • [PATCH 05/11] libmultipath: prio: constify some function parameters, mwilck
  • [PATCH 02/11] libmultipath: copy mpp->hwe from pp->hwe, mwilck
    • Re: [PATCH 02/11] libmultipath: copy mpp->hwe from pp->hwe, Benjamin Marzinski
      • Re: [PATCH 02/11] libmultipath: copy mpp->hwe from pp->hwe, Martin Wilck
        • Re: [PATCH 02/11] libmultipath: copy mpp->hwe from pp->hwe, Benjamin Marzinski
  • [PATCH 10/11] libmpathpersist: add linker version script, mwilck
    • Re: [PATCH 10/11] libmpathpersist: add linker version script, Benjamin Marzinski
      • Re: [PATCH 10/11] libmpathpersist: add linker version script, Martin Wilck
        • Re: [PATCH 10/11] libmpathpersist: add linker version script, Benjamin Marzinski
          • Message not available
            • Message not available
              • Re: [PATCH 10/11] libmpathpersist: add linker version script, Benjamin Marzinski
  • [PATCH 08/11] libmultipath: create separate .so for unit tests, mwilck
    • Re: [PATCH 08/11] libmultipath: create separate .so for unit tests, Benjamin Marzinski
  • [PATCH 09/11] libmultipath: add linker version script, mwilck
  • [PATCH 04/11] libdmmp tests: fix compilation, mwilck
  • [PATCH 06/11] libmultipath: checkers/prio: allow non-lazy .so loading, mwilck
    • Re: [PATCH 06/11] libmultipath: checkers/prio: allow non-lazy .so loading, Benjamin Marzinski
  • [PATCH 03/11] libmultipath: dm_map_present_by_uuid(): fix dm_task_create() call, mwilck
  • Re: [PATCH 00/11] multipath-tools: add linker version scripts, Benjamin Marzinski
    • Re: [PATCH 00/11] multipath-tools: add linker version scripts, Martin Wilck
• [PATCH v4 0/6] IMA: Infrastructure for measurement of critical kernel data, Tushar Sugandhi
  • [PATCH v4 2/6] IMA: conditionally allow empty rule data, Tushar Sugandhi
    • Re: [PATCH v4 2/6] IMA: conditionally allow empty rule data, Mimi Zohar
      • Re: [PATCH v4 2/6] IMA: conditionally allow empty rule data, Tushar Sugandhi
  • [PATCH v4 1/6] IMA: generalize keyring specific measurement constructs, Tushar Sugandhi
    • Re: [PATCH v4 1/6] IMA: generalize keyring specific measurement constructs, Mimi Zohar
      • Re: [PATCH v4 1/6] IMA: generalize keyring specific measurement constructs, Tushar Sugandhi
  • [PATCH v4 6/6] IMA: validate supported kernel data sources before measurement, Tushar Sugandhi
  • [PATCH v4 3/6] IMA: update process_buffer_measurement to measure buffer hash, Tushar Sugandhi
  • [PATCH v4 5/6] IMA: add hook to measure critical data from kernel components, Tushar Sugandhi
    • Re: [PATCH v4 5/6] IMA: add hook to measure critical data from kernel components, Mimi Zohar
      • Re: [PATCH v4 5/6] IMA: add hook to measure critical data from kernel components, Tushar Sugandhi
  • [PATCH v4 4/6] IMA: add policy to measure critical data from kernel components, Tushar Sugandhi
    • Re: [PATCH v4 4/6] IMA: add policy to measure critical data from kernel components, Mimi Zohar
      • Re: [PATCH v4 4/6] IMA: add policy to measure critical data from kernel components, Tushar Sugandhi
  • Re: [PATCH v4 0/6] IMA: Infrastructure for measurement of critical kernel data, Mimi Zohar
    • Re: [PATCH v4 0/6] IMA: Infrastructure for measurement of critical kernel data, Tushar Sugandhi
• bdi cleanups v7, Christoph Hellwig
  • [PATCH 02/13] drbd: remove dead code in device_to_statistics, Christoph Hellwig
  • [PATCH 10/13] mm: use SWP_SYNCHRONOUS_IO more intelligently, Christoph Hellwig
  • [PATCH 03/13] bcache: inherit the optimal I/O size, Christoph Hellwig
    • Re: [PATCH 03/13] bcache: inherit the optimal I/O size, Martin K. Petersen
  • [PATCH 07/13] block: lift setting the readahead size into the block layer, Christoph Hellwig
    • Re: [PATCH 07/13] block: lift setting the readahead size into the block layer, Jan Kara
    • Re: [PATCH 07/13] block: lift setting the readahead size into the block layer, Mike Snitzer
    • Re: [PATCH 07/13] block: lift setting the readahead size into the block layer, Martin K. Petersen
  • [PATCH 11/13] bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag, Christoph Hellwig
  • [PATCH 04/13] aoe: set an optimal I/O size, Christoph Hellwig
    • Re: [PATCH 04/13] aoe: set an optimal I/O size, Martin K. Petersen
  • [PATCH 01/13] fs: remove the unused SB_I_MULTIROOT flag, Christoph Hellwig
  • [PATCH 06/13] md: update the optimal I/O size on reshape, Christoph Hellwig
    • Re: [PATCH 06/13] md: update the optimal I/O size on reshape, Martin K. Petersen
  • [PATCH 09/13] bdi: remove BDI_CAP_SYNCHRONOUS_IO, Christoph Hellwig
  • [PATCH 13/13] bdi: replace BDI_CAP_NO_{WRITEBACK, ACCT_DIRTY} with a single flag, Christoph Hellwig
  • [PATCH 12/13] bdi: invert BDI_CAP_NO_ACCT_WB, Christoph Hellwig
  • [PATCH 08/13] bdi: remove BDI_CAP_CGROUP_WRITEBACK, Christoph Hellwig
  • [PATCH 05/13] bdi: initialize ->ra_pages and ->io_pages in bdi_init, Christoph Hellwig
  • Re: bdi cleanups v7, Jens Axboe
• [RFC PATCH v2 0/3] add library to check if device is a valid path, Benjamin Marzinski
  • [RFC PATCH v2 1/3] multipath: add libmpathvalid library, Benjamin Marzinski
  • [RFC PATCH v2 3/3] libmultipath: change log level for null uid_attribute, Benjamin Marzinski
    • Re: [RFC PATCH v2 3/3] libmultipath: change log level for null uid_attribute, Martin Wilck
      • Re: [RFC PATCH v2 3/3] libmultipath: change log level for null uid_attribute, Benjamin Marzinski
        • Re: [RFC PATCH v2 3/3] libmultipath: change log level for null uid_attribute, Martin Wilck
  • [RFC PATCH v2 2/3] libmultipath: add uid failback for dasd devices, Benjamin Marzinski
  • Re: [RFC PATCH v2 0/3] add library to check if device is a valid path, Martin Wilck
    • Re: [RFC PATCH v2 0/3] add library to check if device is a valid path, Benjamin Marzinski
      • Re: [RFC PATCH v2 0/3] add library to check if device is a valid path, Martin Wilck
        • Re: [RFC PATCH v2 0/3] add library to check if device is a valid path, Benjamin Marzinski
          • Re: [RFC PATCH v2 0/3] add library to check if device is a valid path, Martin Wilck
            • Re: [RFC PATCH v2 0/3] add library to check if device is a valid path, Benjamin Marzinski
• [PATCH 0/2] block/dm: add REQ_NOWAIT support for bio-based, Mike Snitzer
  • [PATCH 1/2] block: add QUEUE_FLAG_NOWAIT, Mike Snitzer
    • Re: [PATCH 1/2] block: add QUEUE_FLAG_NOWAIT, Christoph Hellwig
  • [PATCH 2/2] dm: add support for REQ_NOWAIT and enable it for linear target, Mike Snitzer
  • Re: [PATCH 0/2] block/dm: add REQ_NOWAIT support for bio-based, Jens Axboe
• [git pull] device mapper fixes for 5.9 final, Mike Snitzer
  • Re: [git pull] device mapper fixes for 5.9 final, pr-tracker-bot
• [PATCH] libmultipath: Allow discovery of USB devices, Frank Meinl
  • Re: [PATCH] libmultipath: Allow discovery of USB devices, Martin Wilck
    • Re: [PATCH] libmultipath: Allow discovery of USB devices, Benjamin Marzinski
      • Re: [PATCH] libmultipath: Allow discovery of USB devices, Martin Wilck
        • Re: [PATCH] libmultipath: Allow discovery of USB devices, Frank Meinl
    • Re: [PATCH] libmultipath: Allow discovery of USB devices, Frank Meinl
• [PATCH -next] dm bufio: simplify the return expression of skip_metadata(), Qinglang Miao
• [PATCH v3 0/6] dm: fix then improve bio splitting, Mike Snitzer
  • [PATCH v3 1/6] dm: fix bio splitting and its bio completion order for regular IO, Mike Snitzer
  • [PATCH v3 6/6] dm: change max_io_len() to use blk_max_size_offset(), Mike Snitzer
  • [PATCH v3 4/6] block: allow 'chunk_sectors' to be non-power-of-2, Mike Snitzer
    • Re: [PATCH v3 4/6] block: allow 'chunk_sectors' to be non-power-of-2, Martin K. Petersen
  • [PATCH v3 5/6] dm table: stack 'chunk_sectors' limit to account for target-specific splitting, Mike Snitzer
  • [PATCH v3 3/6] block: use lcm_not_zero() when stacking chunk_sectors, Mike Snitzer
    • Re: [PATCH v3 3/6] block: use lcm_not_zero() when stacking chunk_sectors, Martin K. Petersen
  • [PATCH v3 2/6] dm: fix comment in dm_process_bio(), Mike Snitzer
  • Re: [PATCH v3 0/6] dm: fix then improve bio splitting, Jens Axboe
• [PATCH] libmultipath: set mpp->hwe NULL when free_path, lixiaokeng
  • Re: [PATCH] libmultipath: set mpp->hwe NULL when free_path, Martin Wilck
• bdi cleanups v6, Christoph Hellwig
  • [PATCH 04/13] aoe: set an optimal I/O size, Christoph Hellwig
    • Re: [PATCH 04/13] aoe: set an optimal I/O size, Jan Kara
  • [PATCH 03/13] bcache: inherit the optimal I/O size, Christoph Hellwig
    • Re: [PATCH 03/13] bcache: inherit the optimal I/O size, Coly Li
      • Re: [PATCH 03/13] bcache: inherit the optimal I/O size, Christoph Hellwig
        • Re: [PATCH 03/13] bcache: inherit the optimal I/O size, Coly Li
          • Re: [PATCH 03/13] bcache: inherit the optimal I/O size, Christoph Hellwig
    • Re: [PATCH 03/13] bcache: inherit the optimal I/O size, Jan Kara
    • Re: [PATCH 03/13] bcache: inherit the optimal I/O size, Coly Li
  • [PATCH 01/13] fs: remove the unused SB_I_MULTIROOT flag, Christoph Hellwig
  • [PATCH 05/13] bdi: initialize ->ra_pages and ->io_pages in bdi_init, Christoph Hellwig
    • Re: [PATCH 05/13] bdi: initialize ->ra_pages and ->io_pages in bdi_init, Jan Kara
      • Re: [PATCH 05/13] bdi: initialize ->ra_pages and ->io_pages in bdi_init, Christoph Hellwig
  • [PATCH 08/13] bdi: remove BDI_CAP_CGROUP_WRITEBACK, Christoph Hellwig
  • [PATCH 07/13] block: lift setting the readahead size into the block layer, Christoph Hellwig
    • Re: [PATCH 07/13] block: lift setting the readahead size into the block layer, Jan Kara
    • Re: [PATCH 07/13] block: lift setting the readahead size into the block layer, Coly Li
  • [PATCH 11/13] bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag, Christoph Hellwig
  • [PATCH 09/13] bdi: remove BDI_CAP_SYNCHRONOUS_IO, Christoph Hellwig
  • [PATCH 06/13] md: update the optimal I/O size on reshape, Christoph Hellwig
  • [PATCH 13/13] bdi: replace BDI_CAP_NO_{WRITEBACK, ACCT_DIRTY} with a single flag, Christoph Hellwig
  • [PATCH 12/13] bdi: invert BDI_CAP_NO_ACCT_WB, Christoph Hellwig
  • [PATCH 02/13] drbd: remove dead code in device_to_statistics, Christoph Hellwig
  • [PATCH 10/13] mm: use SWP_SYNCHRONOUS_IO more intelligently, Christoph Hellwig
• Re: PROBLEM: 5.9.0-rc6 fails to compile due to 'redefinition of ‘dax_supported’', Naresh Kamboju
  • Re: PROBLEM: 5.9.0-rc6 fails to compile due to 'redefinition of ‘dax_supported’', Greg KH
    • Re: PROBLEM: 5.9.0-rc6 fails to compile due to 'redefinition of ‘dax_supported’', Borislav Petkov
    • Re: PROBLEM: 5.9.0-rc6 fails to compile due to 'redefinition of ‘dax_supported’', Jan Kara
      • Re: PROBLEM: 5.9.0-rc6 fails to compile due to 'redefinition of ‘dax_supported’', Geert Uytterhoeven
        • Re: PROBLEM: 5.9.0-rc6 fails to compile due to 'redefinition of ‘dax_supported’', Stuart Little
    • Re: PROBLEM: 5.9.0-rc6 fails to compile due to 'redefinition of ‘dax_supported’', Bhaskar Chowdhury
• [PATCH v2] libmultipath: check udev_device_get_* return value to avoid segfault, lixiaokeng
  • Re: [PATCH v2] libmultipath: check udev_device_get_* return value to avoid segfault, Martin Wilck
    • Re: [PATCH v2] libmultipath: check udev_device_get_* return value to avoid segfault, lixiaokeng
• libnvdimm fixes 5.9-rc6, Dan Williams
  • Re: libnvdimm fixes 5.9-rc6, Linus Torvalds
• [PATCH v4] dm: Call proper helper to determine dax support, Dan Williams
• [PATCH V6 00/14] multipath-tools series: some cleanups and fixes checked by codedex tool, lixiaokeng
  • [PATCH V6 11/14] mpathpersist: check whether malloc paramp->trnptid_list fails in handle_args func, lixiaokeng
    • Re: [PATCH V6 11/14] mpathpersist: check whether malloc paramp->trnptid_list fails in handle_args func, Martin Wilck
• [PATCH v3] dm: Call proper helper to determine dax support, Dan Williams
• [PATCH] dm/dax: Fix table reference counts, Dan Williams
  • Re: [External] [PATCH] dm/dax: Fix table reference counts, Adrian Huang12
  • Re: [PATCH] dm/dax: Fix table reference counts, Ira Weiny
• [PATCH v2] dm: Call proper helper to determine dax support, Dan Williams
  • Re: [PATCH v2] dm: Call proper helper to determine dax support, Darrick J. Wong
    • Re: [PATCH v2] dm: Call proper helper to determine dax support, Dan Williams
  • Re: [PATCH v2] dm: Call proper helper to determine dax support, Naresh Kamboju
    • Re: [PATCH v2] dm: Call proper helper to determine dax support, Jan Kara
• [PATCH AUTOSEL 5.4 026/330] dm table: do not allow request-based DM to stack on partitions, Sasha Levin
• [PATCH] dm thin metadata: Remove unused local variable when create thin and snap, Huaisheng Ye
• [RFC PATCH 0/2] dm crypt: Allow unaligned buffer lengths for skcipher devices, Sudhakar Panneerselvam
  • [RFC PATCH 2/2] dm crypt: Handle unaligned bio buffer lengths for lmk and tcw, Sudhakar Panneerselvam
  • [RFC PATCH 1/2] dm crypt: Allow unaligned bio buffer lengths for skcipher devices, Sudhakar Panneerselvam
  • Re: [RFC PATCH 0/2] dm crypt: Allow unaligned buffer lengths for skcipher devices, Sudhakar Panneerselvam
    • Re: [RFC PATCH 0/2] dm crypt: Allow unaligned buffer lengths for skcipher devices, Mike Snitzer
      • Re: [RFC PATCH 0/2] dm crypt: Allow unaligned buffer lengths for skcipher devices, Eric Biggers
        • Re: [RFC PATCH 0/2] dm crypt: Allow unaligned buffer lengths for skcipher devices, Milan Broz
          • Re: [RFC PATCH 0/2] dm crypt: Allow unaligned buffer lengths for skcipher devices, Sudhakar Panneerselvam
        • Re: [RFC PATCH 0/2] dm crypt: Allow unaligned buffer lengths for skcipher devices, Sudhakar Panneerselvam
          • Re: [RFC PATCH 0/2] dm crypt: Allow unaligned buffer lengths for skcipher devices, Mikulas Patocka
            • Re: [RFC PATCH 0/2] dm crypt: Allow unaligned buffer lengths for skcipher devices, Sudhakar Panneerselvam
              • Re: [RFC PATCH 0/2] dm crypt: Allow unaligned buffer lengths for skcipher devices, Mikulas Patocka
                • Re: [RFC PATCH 0/2] dm crypt: Allow unaligned buffer lengths for skcipher devices, Sudhakar Panneerselvam
                  • Re: [RFC PATCH 0/2] dm crypt: Allow unaligned buffer lengths for skcipher devices, Mikulas Patocka
                    • Re: [RFC PATCH 0/2] dm crypt: Allow unaligned buffer lengths for skcipher devices, Sudhakar Panneerselvam
                      • Re: [RFC PATCH 0/2] dm crypt: Allow unaligned buffer lengths for skcipher devices, Damien Le Moal
                        • Re: [RFC PATCH 0/2] dm crypt: Allow unaligned buffer lengths for skcipher devices, Mike Snitzer
      • Re: [RFC PATCH 0/2] dm crypt: Allow unaligned buffer lengths for skcipher devices, Mikulas Patocka
      • Re: [RFC PATCH 0/2] dm crypt: Allow unaligned buffer lengths for skcipher devices, Sudhakar Panneerselvam
    • Re: [RFC PATCH 0/2] dm crypt: Allow unaligned buffer lengths for skcipher devices, Mikulas Patocka
      • Re: [RFC PATCH 0/2] dm crypt: Allow unaligned buffer lengths for skcipher devices, Sudhakar Panneerselvam
• [PATCH 1/2] libmultipath: find_mpe(): don't match with empty WWID, mwilck
  • [PATCH 2/2] libmultipath: copy mpp->hwe from pp->hwe, mwilck
• [PATCH] libmultipath: fix memory leak in _check_bindings_file, mwilck
  • Re: [PATCH] libmultipath: fix memory leak in _check_bindings_file, Benjamin Marzinski
• [PATCH 00/19] multipath-tools: shutdown, libdevmapper races, globals, mwilck
  • [PATCH 06/19] multipathd: generalize and fix wait_for_state_change_if(), mwilck
  • [PATCH 02/19] multipathd: avoid sending "READY=1" to systemd on early shutdown, mwilck
  • [PATCH 07/19] multipathd: set_config_state(): avoid code duplication, mwilck
    • Re: [PATCH 07/19] multipathd: set_config_state(): avoid code duplication, Benjamin Marzinski
  • [PATCH 15/19] multipath: use {get_put}_multipath_config from libmultipath, mwilck
  • [PATCH 14/19] libmpathpersist: allow using libmultipath {get, put}_multipath_config, mwilck
  • [PATCH 04/19] multipathd: send "RELOADING=1" to systemd on DAEMON_CONFIGURE state, mwilck
  • [PATCH 10/19] libmultipath: devmapper: refactor libdm version determination, mwilck
    • Re: [PATCH 10/19] libmultipath: devmapper: refactor libdm version determination, Benjamin Marzinski
      • Re: [PATCH 10/19] libmultipath: devmapper: refactor libdm version determination, Martin Wilck
  • [PATCH 11/19] libmultipath: protect racy libdevmapper calls with a mutex, mwilck
  • [PATCH 03/19] multipathd: send "STOPPING=1" to systemd on shutdown, mwilck
  • [PATCH 13/19] libmultipath: provide defaults for {get, put}_multipath_config, mwilck
    • Re: [PATCH 13/19] libmultipath: provide defaults for {get, put}_multipath_config, Benjamin Marzinski
      • Re: [PATCH 13/19] libmultipath: provide defaults for {get, put}_multipath_config, Martin Wilck
  • [PATCH 16/19] mpathpersist: use {get, put}_multipath_config() from libmultipath, mwilck
  • [PATCH 08/19] multipathd: cancel threads early during shutdown, mwilck
  • [PATCH 12/19] libmultipath: constify file argument in config parser, mwilck
  • [PATCH 17/19] libmultipath: add udev and logsink symbols, mwilck
    • Re: [PATCH 17/19] libmultipath: add udev and logsink symbols, Benjamin Marzinski
      • Re: [PATCH 17/19] libmultipath: add udev and logsink symbols, Martin Wilck
        • Re: [PATCH 17/19] libmultipath: add udev and logsink symbols, Benjamin Marzinski
  • [PATCH 19/19] mpathpersist: remove logsink and udev, mwilck
    • Re: [PATCH 19/19] mpathpersist: remove logsink and udev, Benjamin Marzinski
      • Re: [PATCH 19/19] mpathpersist: remove logsink and udev, Martin Wilck
  • [PATCH 09/19] multipath-tools: don't call dm_lib_release() any more, mwilck
  • [PATCH 18/19] multipath: remove logsink and udev, mwilck
  • [PATCH 05/19] multipathd: use volatile qualifier for running_state, mwilck
  • [PATCH 01/19] multipathd: allow shutdown during configure(), mwilck
  • Re: [PATCH 00/19] multipath-tools: shutdown, libdevmapper races, globals, Benjamin Marzinski
• [PATCH v2 0/3] block: fix up bio_crypt_ctx allocation, Eric Biggers
  • [PATCH v2 1/3] block: make bio_crypt_clone() able to fail, Eric Biggers
    • Re: [PATCH v2 1/3] block: make bio_crypt_clone() able to fail, Satya Tangirala
    • Re: [PATCH v2 1/3] block: make bio_crypt_clone() able to fail, Mike Snitzer
  • [PATCH v2 2/3] block: make blk_crypto_rq_bio_prep() able to fail, Eric Biggers
    • Re: [PATCH v2 2/3] block: make blk_crypto_rq_bio_prep() able to fail, Satya Tangirala
    • Re: [PATCH v2 2/3] block: make blk_crypto_rq_bio_prep() able to fail, Mike Snitzer
  • [PATCH v2 3/3] block: warn if !__GFP_DIRECT_RECLAIM in bio_crypt_set_ctx(), Eric Biggers
    • Re: [PATCH v2 3/3] block: warn if !__GFP_DIRECT_RECLAIM in bio_crypt_set_ctx(), Satya Tangirala
  • Re: [PATCH v2 0/3] block: fix up bio_crypt_ctx allocation, Eric Biggers
    • Re: [PATCH v2 0/3] block: fix up bio_crypt_ctx allocation, Eric Biggers
  • Re: [PATCH v2 0/3] block: fix up bio_crypt_ctx allocation, Jens Axboe
• [PATCH 0/3] add library to check if device is a valid path, Benjamin Marzinski
  • [PATCH 2/3] libmultipath: add uid failback for dasd devices, Benjamin Marzinski
    • Re: [PATCH 2/3] libmultipath: add uid failback for dasd devices, Martin Wilck
  • [PATCH 1/3] multipath: add libmpathvalid library, Benjamin Marzinski
    • Re: [PATCH 1/3] multipath: add libmpathvalid library, Martin Wilck
      • Re: [PATCH 1/3] multipath: add libmpathvalid library, Benjamin Marzinski
        • Re: [PATCH 1/3] multipath: add libmpathvalid library, Martin Wilck
  • [PATCH 3/3] libmultipath: add ignore_udev_uid option, Benjamin Marzinski
    • Re: [PATCH 3/3] libmultipath: add ignore_udev_uid option, Martin Wilck
      • Re: [PATCH 3/3] libmultipath: add ignore_udev_uid option, Benjamin Marzinski
• [PATCH v2 0/4] block: a couple chunk_sectors fixes/improvements, Mike Snitzer
  • [PATCH v2 2/4] block: allow 'chunk_sectors' to be non-power-of-2, Mike Snitzer
  • [PATCH v2 1/4] block: use lcm_not_zero() when stacking chunk_sectors, Mike Snitzer
  • [PATCH v2 3/4] dm table: stack 'chunk_sectors' limit to account for target-specific splitting, Mike Snitzer
  • [PATCH v2 4/4] dm: unconditionally call blk_queue_split() in dm_process_bio(), Mike Snitzer
    • Re: [PATCH v2 4/4] dm: unconditionally call blk_queue_split() in dm_process_bio(), Ming Lei
      • Re: [PATCH v2 4/4] dm: unconditionally call blk_queue_split() in dm_process_bio(), Mike Snitzer
        • Re: [PATCH v2 4/4] dm: unconditionally call blk_queue_split() in dm_process_bio(), Ming Lei
          • Re: [PATCH v2 4/4] dm: unconditionally call blk_queue_split() in dm_process_bio(), Mike Snitzer
            • Re: [PATCH v2 4/4] dm: unconditionally call blk_queue_split() in dm_process_bio(), Ming Lei
• bdi cleanups v5, Christoph Hellwig
  • [PATCH 01/12] fs: remove the unused SB_I_MULTIROOT flag, Christoph Hellwig
  • [PATCH 02/12] drbd: remove dead code in device_to_statistics, Christoph Hellwig
  • [PATCH 03/12] drbd: remove RB_CONGESTED_REMOTE, Christoph Hellwig
  • [PATCH 04/12] bdi: initialize ->ra_pages and ->io_pages in bdi_init, Christoph Hellwig
  • [PATCH 05/12] md: update the optimal I/O size on reshape, Christoph Hellwig
  • [PATCH 06/12] block: lift setting the readahead size into the block layer, Christoph Hellwig
  • [PATCH 07/12] bdi: remove BDI_CAP_CGROUP_WRITEBACK, Christoph Hellwig
  • [PATCH 08/12] bdi: remove BDI_CAP_SYNCHRONOUS_IO, Christoph Hellwig
  • [PATCH 09/12] mm: use SWP_SYNCHRONOUS_IO more intelligently, Christoph Hellwig
  • [PATCH 10/12] bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag, Christoph Hellwig
  • [PATCH 11/12] bdi: invert BDI_CAP_NO_ACCT_WB, Christoph Hellwig
  • [PATCH 12/12] bdi: replace BDI_CAP_NO_{WRITEBACK, ACCT_DIRTY} with a single flag, Christoph Hellwig
• [PATCH 0/6] libmultipath: check udev* func return value, lixiaokeng
  • [PATCH 1/6] libmultipath: check uedv* return value in sysfs_get_host_pci_name, lixiaokeng
    • Re: [PATCH 1/6] libmultipath: check uedv* return value in sysfs_get_host_pci_name, Martin Wilck
  • [PATCH 2/6] libmultipath: check udev* return value in ccw_sysfs_pathinfo, lixiaokeng
    • Re: [PATCH 2/6] libmultipath: check udev* return value in ccw_sysfs_pathinfo, Martin Wilck
  • [PATCH 3/6] libmultipath: check udev* return value in sysfs_get_tgt_nodename, lixiaokeng
  • [PATCH 4/6] libmultipath: check udev* return value in trigger_partitions_udev_change, lixiaokeng
  • [PATCH 5/6] libmultipath: check udev* renturn value in get_ctrl_blkdev, lixiaokeng
    • Re: [PATCH 5/6] libmultipath: check udev* renturn value in get_ctrl_blkdev, Martin Wilck
  • [PATCH 6/6] libmultipath: check udev* return value in _find_path_by_syspath, lixiaokeng
    • Re: [PATCH 6/6] libmultipath: check udev* return value in _find_path_by_syspath, Martin Wilck
  • Re: [PATCH 0/6] libmultipath: check udev* func return value, Benjamin Marzinski
    • Re: [PATCH 0/6] libmultipath: check udev* func return value, Martin Wilck
      • Re: [PATCH 0/6] libmultipath: check udev* func return value, lixiaokeng
        • Re: [PATCH 0/6] libmultipath: check udev* func return value, Martin Wilck
• [dm:dm-5.10 3/6] drivers/md/dm-table.c:1507:28: error: implicit declaration of function 'lcm_not_zero'; did you mean, kernel test robot
• [PATCH -next] dm integrity: convert to use le64_add_cpu(), Liu Shixin
  • Re: [PATCH -next] dm integrity: convert to use le64_add_cpu(), kernel test robot
• Re: [PATCH] crypto: mark unused ciphers as obsolete, Ard Biesheuvel
  • Re: [PATCH] crypto: mark unused ciphers as obsolete, Milan Broz
  • Re: [PATCH] crypto: mark unused ciphers as obsolete, Van Leeuwen, Pascal
• [PATCH v2] libmultipath: setup_map(): don't break multipath attributes, mwilck
  • Re: [PATCH v2] libmultipath: setup_map(): don't break multipath attributes, Benjamin Marzinski
• [PATCH] libmultipath: setup_map(): don't break multipath attributes, mwilck
• bdi cleanups v4, Christoph Hellwig
  • [PATCH 09/12] mm: use SWP_SYNCHRONOUS_IO more intelligently, Christoph Hellwig
    • Re: [PATCH 09/12] mm: use SWP_SYNCHRONOUS_IO more intelligently, Jan Kara
  • [PATCH 04/12] bdi: initialize ->ra_pages and ->io_pages in bdi_init, Christoph Hellwig
    • Re: [PATCH 04/12] bdi: initialize ->ra_pages and ->io_pages in bdi_init, Jan Kara
      • Re: [PATCH 04/12] bdi: initialize ->ra_pages and ->io_pages in bdi_init, Christoph Hellwig
  • [PATCH 10/12] bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag, Christoph Hellwig
    • Re: [PATCH 10/12] bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag, Jan Kara
      • Re: [PATCH 10/12] bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag, Christoph Hellwig
  • [PATCH 07/12] bdi: remove BDI_CAP_CGROUP_WRITEBACK, Christoph Hellwig
    • Re: [PATCH 07/12] bdi: remove BDI_CAP_CGROUP_WRITEBACK, David Sterba
    • Re: [PATCH 07/12] bdi: remove BDI_CAP_CGROUP_WRITEBACK, Jan Kara
  • [PATCH 08/12] bdi: remove BDI_CAP_SYNCHRONOUS_IO, Christoph Hellwig
    • Re: [PATCH 08/12] bdi: remove BDI_CAP_SYNCHRONOUS_IO, Jan Kara
  • [PATCH 12/12] bdi: replace BDI_CAP_NO_{WRITEBACK, ACCT_DIRTY} with a single flag, Christoph Hellwig
    • Re: [PATCH 12/12] bdi: replace BDI_CAP_NO_{WRITEBACK, ACCT_DIRTY} with a single flag, Jan Kara
  • [PATCH 02/12] drbd: remove dead code in device_to_statistics, Christoph Hellwig
    • Re: [PATCH 02/12] drbd: remove dead code in device_to_statistics, Jan Kara
  • [PATCH 11/12] bdi: invert BDI_CAP_NO_ACCT_WB, Christoph Hellwig
    • Re: [PATCH 11/12] bdi: invert BDI_CAP_NO_ACCT_WB, Jan Kara
  • [PATCH 06/12] block: lift setting the readahead size into the block layer, Christoph Hellwig
    • Re: [PATCH 06/12] block: lift setting the readahead size into the block layer, Jan Kara
      • Re: [PATCH 06/12] block: lift setting the readahead size into the block layer, Christoph Hellwig
  • [PATCH 05/12] md: update the optimal I/O size on reshape, Christoph Hellwig
    • Re: [PATCH 05/12] md: update the optimal I/O size on reshape, Song Liu
  • [PATCH 03/12] drbd: remove RB_CONGESTED_REMOTE, Christoph Hellwig
    • Re: [PATCH 03/12] drbd: remove RB_CONGESTED_REMOTE, Jan Kara
      • Re: [PATCH 03/12] drbd: remove RB_CONGESTED_REMOTE, Christoph Hellwig
  • [PATCH 01/12] fs: remove the unused SB_I_MULTIROOT flag, Christoph Hellwig
    • Re: [PATCH 01/12] fs: remove the unused SB_I_MULTIROOT flag, Jan Kara
• Re: Revert "dm: always call blk_queue_split() in dm_process_bio()", Mike Snitzer
  • Re: Revert "dm: always call blk_queue_split() in dm_process_bio()", Ming Lei
    • Re: Revert "dm: always call blk_queue_split() in dm_process_bio()", Mike Snitzer
      • [PATCH 0/3] block: a few chunk_sectors fixes/improvements, Mike Snitzer
        • [PATCH 2/3] block: use lcm_not_zero() when stacking chunk_sectors, Mike Snitzer
          • Re: [PATCH 2/3] block: use lcm_not_zero() when stacking chunk_sectors, Ming Lei
        • [PATCH 1/3] block: fix blk_rq_get_max_sectors() to flow more carefully, Mike Snitzer
          • Re: [PATCH 1/3] block: fix blk_rq_get_max_sectors() to flow more carefully, Ming Lei
            • Re: [PATCH 1/3] block: fix blk_rq_get_max_sectors() to flow more carefully, Damien Le Moal
              • Re: [PATCH 1/3] block: fix blk_rq_get_max_sectors() to flow more carefully, Mike Snitzer
                • Re: [PATCH 1/3] block: fix blk_rq_get_max_sectors() to flow more carefully, Damien Le Moal
              • Re: [PATCH 1/3] block: fix blk_rq_get_max_sectors() to flow more carefully, Ming Lei
                • Re: [PATCH 1/3] block: fix blk_rq_get_max_sectors() to flow more carefully, Damien Le Moal
            • Re: [PATCH 1/3] block: fix blk_rq_get_max_sectors() to flow more carefully, Mike Snitzer
              • Re: [PATCH 1/3] block: fix blk_rq_get_max_sectors() to flow more carefully, Ming Lei
          • Re: [PATCH 1/3] block: fix blk_rq_get_max_sectors() to flow more carefully, Damien Le Moal
            • Re: [PATCH 1/3] block: fix blk_rq_get_max_sectors() to flow more carefully, Mike Snitzer
              • Re: [PATCH 1/3] block: fix blk_rq_get_max_sectors() to flow more carefully, Damien Le Moal
                • Re: [PATCH 1/3] block: fix blk_rq_get_max_sectors() to flow more carefully, Damien Le Moal
                  • Re: [PATCH 1/3] block: fix blk_rq_get_max_sectors() to flow more carefully, Ming Lei
        • [PATCH 3/3] block: allow 'chunk_sectors' to be non-power-of-2, Mike Snitzer
          • Re: [PATCH 3/3] block: allow 'chunk_sectors' to be non-power-of-2, Ming Lei
            • Re: [PATCH 3/3] block: allow 'chunk_sectors' to be non-power-of-2, Keith Busch
          • Re: [PATCH 3/3] block: allow 'chunk_sectors' to be non-power-of-2, Damien Le Moal
  • Re: Revert "dm: always call blk_queue_split() in dm_process_bio()", Vijayendra Suman
    • Re: Revert "dm: always call blk_queue_split() in dm_process_bio()", Mike Snitzer
      • Re: Revert "dm: always call blk_queue_split() in dm_process_bio()", Mike Snitzer
      • Re: Revert "dm: always call blk_queue_split() in dm_process_bio()", Vijayendra Suman
• [PATCH V4 00/14] multipath-tools series: some cleanups and fixes checked by codedex tool, lixiaokeng
  • [PATCH V4 01/14] multipathd: initialize major and minor in cli_add_map, lixiaokeng
    • Re: [PATCH V4 01/14] multipathd: initialize major and minor in cli_add_map, Martin Wilck
  • [PATCH V4 02/14] libmultipath: change malloc to calloc in print_foreign_topology, lixiaokeng
    • Re: [PATCH V4 02/14] libmultipath: change malloc to calloc in print_foreign_topology, Martin Wilck
  • [PATCH V4 05/14] multipathd: check return value of malloc in cli_getprkey func, lixiaokeng
    • Re: [PATCH V4 05/14] multipathd: check return value of malloc in cli_getprkey func, Martin Wilck
  • [PATCH V4 06/14] kpartx: use xmalloc to instead of malloc in main func, lixiaokeng
    • Re: [PATCH V4 06/14] kpartx: use xmalloc to instead of malloc in main func, Martin Wilck
  • [PATCH V4 09/14] libmultipath: check whether mpp->features is NUll in setup_map, lixiaokeng
    • Re: [PATCH V4 09/14] libmultipath: check whether mpp->features is NUll in setup_map, Martin Wilck
      • Re: [PATCH V4 09/14] libmultipath: check whether mpp->features is NUll in setup_map, Benjamin Marzinski
    • Re: [PATCH V4 09/14] libmultipath: check whether mpp->features is NUll in setup_map, Martin Wilck
  • [PATCH V4 04/14] multipathd: check MALLOC return value in mpath_pr_event_handler_fn, lixiaokeng
    • Re: [PATCH V4 04/14] multipathd: check MALLOC return value in mpath_pr_event_handler_fn, Martin Wilck
  • [PATCH V4 11/14] mpathpersist: check whether malloc paramp->trnptid_list fails in handle_args func, lixiaokeng
    • Re: [PATCH V4 11/14] mpathpersist: check whether malloc paramp->trnptid_list fails in handle_args func, Martin Wilck
    • Re: [PATCH V4 11/14] mpathpersist: check whether malloc paramp->trnptid_list fails in handle_args func, Martin Wilck
      • Re: [PATCH V4 11/14] mpathpersist: check whether malloc paramp->trnptid_list fails in handle_args func, lixiaokeng
        • Re: [PATCH V4 11/14] mpathpersist: check whether malloc paramp->trnptid_list fails in handle_args func, Martin Wilck
  • [PATCH V4 12/14] libmultipathpersist: use update_multipath_table/status, in get_mpvec, lixiaokeng
    • Re: [PATCH V4 12/14] libmultipathpersist: use update_multipath_table/status, in get_mpvec, Martin Wilck
  • [PATCH V4 14/14] multipathpersist: delete unused variable in handle_args, lixiaokeng
    • Re: [PATCH V4 14/14] multipathpersist: delete unused variable in handle_args, Martin Wilck
• [PATCH 0/3] add support for inline encryption to device mapper, Satya Tangirala
  • [PATCH 1/3] block: keyslot-manager: Introduce passthrough keyslot manager, Satya Tangirala
    • Re: [PATCH 1/3] block: keyslot-manager: Introduce passthrough keyslot manager, Eric Biggers
  • [PATCH 3/3] dm: enable may_passthrough_inline_crypto on some targets, Satya Tangirala
    • Re: [PATCH 3/3] dm: enable may_passthrough_inline_crypto on some targets, Eric Biggers
  • [PATCH 2/3] dm: add support for passing through inline crypto support, Satya Tangirala
    • Re: [PATCH 2/3] dm: add support for passing through inline crypto support, Eric Biggers
      • Re: [PATCH 2/3] dm: add support for passing through inline crypto support, Mike Snitzer
        • Re: [PATCH 2/3] dm: add support for passing through inline crypto support, Satya Tangirala
          • Re: [PATCH 2/3] dm: add support for passing through inline crypto support, Mike Snitzer
            • Re: [PATCH 2/3] dm: add support for passing through inline crypto support, Eric Biggers
              • Re: [PATCH 2/3] dm: add support for passing through inline crypto support, Mike Snitzer
                • Re: [PATCH 2/3] dm: add support for passing through inline crypto support, Eric Biggers
    • Re: [PATCH 2/3] dm: add support for passing through inline crypto support, Mike Snitzer
      • Re: [PATCH 2/3] dm: add support for passing through inline crypto support, Satya Tangirala
        • Re: [PATCH 2/3] dm: add support for passing through inline crypto support, Mike Snitzer
          • Re: [PATCH 2/3] dm: add support for passing through inline crypto support, Satya Tangirala
      • Re: [PATCH 2/3] dm: add support for passing through inline crypto support, Satya Tangirala
        • Re: [PATCH 2/3] dm: add support for passing through inline crypto support, Mike Snitzer
          • Re: [PATCH 2/3] dm: add support for passing through inline crypto support, Satya Tangirala
• [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Joe Perches
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Gustavo A. R. Silva
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Keith Busch
    • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Jacob Keller
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Jason Gunthorpe
    • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Joe Perches
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Wolfram Sang
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Mauro Carvalho Chehab
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Ilya Dryomov
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Felipe Balbi
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Matthias Brugger
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Nicolas.Ferre
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Steffen Maier
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Robin Murphy
    • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Joe Perches
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Miquel Raynal
  • Re: [Intel-gfx] [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Jani Nikula
  • Re: [oss-drivers] [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Simon Horman
• [PATCH] multipath-tools: add HPE MSA 1060/2060 to hwtable, Xose Vazquez Perez
  • Re: [PATCH] multipath-tools: add HPE MSA 1060/2060 to hwtable, Martin Wilck
• [PATCH V3 00/14] multipath-tools series: some cleanups and fixes checked by codedex tool, lixiaokeng
  • [PATCH V3 01/14] multipathd: initialize major and minor in cli_add_map, lixiaokeng
  • [PATCH V3 02/14] libmultipath: change malloc to calloc in print_foreign_topology, lixiaokeng
  • [PATCH V3 04/14] multipathd: check MALLOC return value in mpath_pr_event_handler_fn, lixiaokeng
  • [PATCH V3 05/14] multipathd: use MALLOC and check return value in cli_getprkey func, lixiaokeng
    • Re: [PATCH V3 05/14] multipathd: use MALLOC and check return value in cli_getprkey func, Martin Wilck
      • Re: [PATCH V3 05/14] multipathd: use MALLOC and check return value in cli_getprkey func, lixiaokeng
  • Re: [PATCH V3 06/14] kpartx: check return value of malloc in main func, lixiaokeng
    • Re: [PATCH V3 06/14] kpartx: check return value of malloc in main func, Martin Wilck
      • Re: [PATCH V3 06/14] kpartx: check return value of malloc in main func, lixiaokeng
  • [PATCH V3 09/14] libmultipath: check whether mp->features is NUll in assemble_map, lixiaokeng
  • [PATCH V3 14/14] multipathpersist: delete unused variable in handle_args, lixiaokeng
  • [PATCH V3 11/14] mpathpersist: check whether malloc paramp->trnptid_list fails in handle_args func, lixiaokeng
  • [PATCH V3 12/14] libmultipathpersist: use update_multipath_table/status in get_mpvec, lixiaokeng
• [PATCH V2 00/14] multipath-tools series: some cleanups and fixes checked by codedex tool, lixiaokeng
  • [PATCH V2 01/14] multipathd: initialize major and minor in cli_add_map, lixiaokeng
  • [PATCH V2 02/14] libmultipath: change malloc to calloc in print_foreign_topology, lixiaokeng
  • [PATCH V2 04/14] multipathd: check MALLOC return value in mpath_pr_event_handler_fn, lixiaokeng
  • [PATCH V2 05/14] multipathd: use MALLOC and check return value in cli_getprkey func, lixiaokeng
  • [PATCH V2 06/14] kpartx: check return value of malloc in main func, lixiaokeng
  • [PATCH V2 09/14] libmultipath: check whether mp->features is NUll in assemble_map, lixiaokeng
  • [PATCH V2 11/14] mpathpersist: check whether malloc paramp->trnptid_list fails in handle_args func, lixiaokeng
  • [PATCH V2 12/14] libmultipathpersist: use update_multipath_table/status in get_mpvec, lixiaokeng
  • [PATCH V2 14/14] multipathpersist: delete unused variable in handle_args, lixiaokeng
  • Re: [PATCH V2 00/14] multipath-tools series: some cleanups and fixes checked by codedex tool, Martin Wilck
    • Re: [PATCH V2 00/14] multipath-tools series: some cleanups and fixes checked by codedex tool, lixiaokeng
  • Re: [PATCH V2 00/14] multipath-tools series: some cleanups and fixes checked by codedex tool, Martin Wilck
    • Re: [PATCH V2 00/14] multipath-tools series: some cleanups and fixes checked by codedex tool, lixiaokeng
• fix for kernel BUG at drivers/scsi/device_handler/scsi_dh_alua.c:662!, Brian Bunker
• kernel BUG at drivers/scsi/device_handler/scsi_dh_alua.c:662!, Brian Bunker
• [PATCH v4] dax: fix for do not print error message for non-persistent memory block device, Coly Li
• [PATCH v3] dax: fix for do not print error message for non-persistent memory block device, Coly Li
• [PATCH v2] dax: fix for do not print error message for non-persistent memory block device, Coly Li
  • Re: [PATCH v2] dax: fix for do not print error message for non-persistent memory block device, Mike Snitzer
    • Re: [PATCH v2] dax: fix for do not print error message for non-persistent memory block device, Coly Li
  • Re: [PATCH v2] dax: fix for do not print error message for non-persistent memory block device, Pankaj Gupta
• [PATCH] dax: fix for do not print error message for non-persistent memory block device, Coly Li
  • Re: [External] [PATCH] dax: fix for do not print error message for non-persistent memory block device, Adrian Huang12
  • Re: [PATCH] dax: fix for do not print error message for non-persistent memory block device, Ira Weiny
    • Re: [PATCH] dax: fix for do not print error message for non-persistent memory block device, Coly Li
      • Re: [PATCH] dax: fix for do not print error message for non-persistent memory block device, John Pittman
        • Re: [PATCH] dax: fix for do not print error message for non-persistent memory block device, Coly Li
• Re: [PATCH] block: make bio_crypt_clone() return an error code, linmiaohe
• clean up is partition checks, Christoph Hellwig
  • [PATCH 2/9] block: add a bdev_is_partition helper, Christoph Hellwig
    • Re: [PATCH 2/9] block: add a bdev_is_partition helper, Ulf Hansson
      • Re: [PATCH 2/9] block: add a bdev_is_partition helper, Christoph Hellwig
  • [PATCH 9/9] vsprintf: use bd_partno in bdev_name, Christoph Hellwig
  • [PATCH 5/9] drbd: don't detour through bd_contains for the gendisk, Christoph Hellwig
  • [PATCH 4/9] md: don't detour through bd_contains for the gendisk, Christoph Hellwig
    • Re: [PATCH 4/9] md: don't detour through bd_contains for the gendisk, Song Liu
  • [PATCH 6/9] drbd: don't set ->bd_contains, Christoph Hellwig
  • [PATCH 1/9] Documentation/hdio: fix up obscure bd_contains references, Christoph Hellwig
  • [PATCH 7/9] target/iblock: fix holder printing in iblock_show_configfs_dev_params, Christoph Hellwig
  • [PATCH 3/9] md: compare bd_disk instead of bd_contains, Christoph Hellwig
    • Re: [PATCH 3/9] md: compare bd_disk instead of bd_contains, Song Liu
  • [PATCH 8/9] block: use bd_partno in bdevname, Christoph Hellwig
  • Re: clean up is partition checks, Christoph Hellwig
  • Re: clean up is partition checks, Jens Axboe
• [git pull] device mapper fixes for 5.9-rc4, Mike Snitzer
  • Re: [git pull] device mapper fixes for 5.9-rc4, pr-tracker-bot
• flood of "dm-X: error: dax access failed" due to 5.9 commit 231609785cbfb, Mike Snitzer
  • Re: flood of "dm-X: error: dax access failed" due to 5.9 commit 231609785cbfb, Coly Li
    • Re: flood of "dm-X: error: dax access failed" due to 5.9 commit 231609785cbfb, Mike Snitzer
      • Re: flood of "dm-X: error: dax access failed" due to 5.9 commit 231609785cbfb, Coly Li
        • Re: flood of "dm-X: error: dax access failed" due to 5.9 commit 231609785cbfb, Mike Snitzer
          • Re: flood of "dm-X: error: dax access failed" due to 5.9 commit 231609785cbfb, Coly Li
          • Re: flood of "dm-X: error: dax access failed" due to 5.9 commit 231609785cbfb, Coly Li
    • Re: flood of "dm-X: error: dax access failed" due to 5.9 commit 231609785cbfb, Verma, Vishal L
      • Re: flood of "dm-X: error: dax access failed" due to 5.9 commit 231609785cbfb, Coly Li
• [PATCH 00/14] multipath-tools series: some cleanups and fixes checked by codedex tool, lixiaokeng
  • [PATCH 01/14] multipathd: return if dm_get_major_minor failed in, cli_add_map, lixiaokeng
    • Re: [PATCH 01/14] multipathd: return if dm_get_major_minor failed in, cli_add_map, Martin Wilck
      • Re: [PATCH 01/14] multipathd: return if dm_get_major_minor failed in, cli_add_map, lixiaokeng
        • Re: [PATCH 01/14] multipathd: return if dm_get_major_minor failed in, cli_add_map, Martin Wilck
  • [PATCH 02/14] libmultipath: check malloc return value in, print_foreign_topology, lixiaokeng
    • Re: [PATCH 02/14] libmultipath: check malloc return value in, print_foreign_topology, Martin Wilck
  • [PATCH 03/14] libmultipath: use map instead of dm_task_get_name, lixiaokeng
    • Re: [PATCH 03/14] libmultipath: use map instead of dm_task_get_name, Martin Wilck
  • [PATCH 04/14] multipathd: check MALLOC return value in, mpath_pr_event_handler_fn, lixiaokeng
    • Re: [PATCH 04/14] multipathd: check MALLOC return value in, mpath_pr_event_handler_fn, Martin Wilck
  • [PATCH 05/14] multipathd: use MALLOC and check return value in, cli_getprkey func, lixiaokeng
    • Re: [PATCH 05/14] multipathd: use MALLOC and check return value in, cli_getprkey func, Martin Wilck
      • Re: [PATCH 05/14] multipathd: use MALLOC and check return value in, cli_getprkey func, Benjamin Marzinski
        • Re: [PATCH 05/14] multipathd: use MALLOC and check return value in, cli_getprkey func, Martin Wilck
  • [PATCH 06/14] kpartx: check return value of malloc in main func, lixiaokeng
    • Re: [PATCH 06/14] kpartx: check return value of malloc in main func, Martin Wilck
  • [PATCH 07/14] libmultipath: check return value of dm_mapname in, sysfs_check_holders, lixiaokeng
    • Re: [PATCH 07/14] libmultipath: check return value of dm_mapname in, sysfs_check_holders, Benjamin Marzinski
  • [PATCH 08/14] libmultipath: donot free *dst if REALLOC fails in, merge_words, lixiaokeng
    • Re: [PATCH 08/14] libmultipath: donot free *dst if REALLOC fails in, merge_words, Benjamin Marzinski
      • Re: [PATCH 08/14] libmultipath: donot free *dst if REALLOC fails in, merge_words, lixiaokeng
  • [PATCH 09/14] libmultipath: check whether mp->features is NULl in, assemble_map, lixiaokeng
    • Re: [PATCH 09/14] libmultipath: check whether mp->features is NULl in, assemble_map, Benjamin Marzinski
      • Re: [PATCH 09/14] libmultipath: check whether mp->features is NULl in, assemble_map, lixiaokeng
        • Re: [PATCH 09/14] libmultipath: check whether mp->features is NULl in, assemble_map, Benjamin Marzinski
          • Re: [PATCH 09/14] libmultipath: check whether mp->features is NULl in, assemble_map, Martin Wilck
            • Re: [PATCH 09/14] libmultipath: check whether mp->features is NULl in, assemble_map, Benjamin Marzinski
            • Re: [PATCH 09/14] libmultipath: check whether mp->features is NULl in, assemble_map, lixiaokeng
              • Re: [PATCH 09/14] libmultipath: check whether mp->features is NULl in, assemble_map, Martin Wilck
  • [PATCH 10/14] util/tests: use assert_non_null to ensure malloc, returns non-null pointer, lixiaokeng
    • Re: [PATCH 10/14] util/tests: use assert_non_null to ensure malloc, returns non-null pointer, Benjamin Marzinski
  • [PATCH 11/14] mpathpersist: check whether malloc paramp->trnptid_list, fails in handle_args func, lixiaokeng
    • Re: [PATCH 11/14] mpathpersist: check whether malloc paramp->trnptid_list, fails in handle_args func, Benjamin Marzinski
      • Re: [PATCH 11/14] mpathpersist: check whether malloc paramp->trnptid_list, fails in handle_args func, lixiaokeng
  • [PATCH 12/14] libmultipathpersist: use update_multipath_table/status, in get_mpvec, lixiaokeng
    • Re: [PATCH 12/14] libmultipathpersist: use update_multipath_table/status, in get_mpvec, Benjamin Marzinski
      • Re: [PATCH 12/14] libmultipathpersist: use update_multipath_table/status, in get_mpvec, lixiaokeng
      • Re: [PATCH 12/14] libmultipathpersist: use update_multipath_table/status, in get_mpvec, Martin Wilck
  • [PATCH 13/14] multipath: use update_multipath_table/status in, check_useable_paths, lixiaokeng
    • Re: [PATCH 13/14] multipath: use update_multipath_table/status in, check_useable_paths, Benjamin Marzinski
  • [PATCH 14/14] multipathpersist: delete unused variable in handle_args, lixiaokeng
    • Re: [PATCH 14/14] multipathpersist: delete unused variable in handle_args, Benjamin Marzinski
  • Re: [PATCH 00/14] multipath-tools series: some cleanups and fixes checked by codedex tool, Martin Wilck
    • Re: [PATCH 00/14] multipath-tools series: some cleanups and fixes checked by codedex tool, lixiaokeng
    • Re: [PATCH 00/14] multipath-tools series: some cleanups and fixes checked by codedex tool, Benjamin Marzinski
      • Re: [PATCH 00/14] multipath-tools series: some cleanups and fixes checked by codedex tool, Martin Wilck
• [PATCH] block: make bio_crypt_clone() return an error code, Eric Biggers
  • Re: [PATCH] block: make bio_crypt_clone() return an error code, Satya Tangirala
• remove revalidate_disk(), Christoph Hellwig
  • [PATCH 2/9] block: don't clear bd_invalidated in check_disk_size_change, Christoph Hellwig
  • [PATCH 8/9] nvdimm: simplify revalidate_disk handling, Christoph Hellwig
  • [PATCH 3/9] block: rename bd_invalidated, Christoph Hellwig
    • Re: [PATCH 3/9] block: rename bd_invalidated, Johannes Thumshirn
  • [PATCH 6/9] nvme: opencode revalidate_disk in nvme_validate_ns, Christoph Hellwig
    • Re: [PATCH 6/9] nvme: opencode revalidate_disk in nvme_validate_ns, Johannes Thumshirn
  • [PATCH 1/9] Documentation/filesystems/locking.rst: remove an incorrect sentence, Christoph Hellwig
    • Re: [PATCH 1/9] Documentation/filesystems/locking.rst: remove an incorrect sentence, Johannes Thumshirn
  • [PATCH 9/9] block: remove revalidate_disk(), Christoph Hellwig
    • Re: [PATCH 9/9] block: remove revalidate_disk(), Johannes Thumshirn
    • Re: [PATCH 9/9] block: remove revalidate_disk(), Song Liu
  • [PATCH 7/9] sd: open code revalidate_disk, Christoph Hellwig