On 2020-09-24 14:10, Brian Bunker wrote: > For LUNs between 0 and 255 peripheral addressing is used. For LUNs higher than 255 the LUN addressing > should switch to flat according to the specification. Instead of printing out the LUN number without regard to > the shifting of address method, display the LUN as it was intended to be the user connecting the LUN. The > current display leaves a non-obvious 16384 offset. > > In short, a LUN connected as 258 will show up in multipath output as 16642. Instead display it as the > expected 258. This is for display only and doesn’t change the actual contents of the LUN variable. > > Signed-off-by: Brian Bunker <brian@xxxxxxxxxxxxxxx> > ___ > --- a/libmultipath/print.c 2020-09-24 13:52:18.661828011 -0600 > +++ b/libmultipath/print.c 2020-09-24 14:28:27.603542303 -0600 > @@ -394,7 +394,7 @@ > pp->sg_id.host_no, > pp->sg_id.channel, > pp->sg_id.scsi_id, > - pp->sg_id.lun); > + (pp->sg_id.lun & 0x4000) ? pp->sg_id.lun - 0x4000 : pp->sg_id.lun); > } Please introduce a function for converting the LUN number format and add appropriate comments. An example is available here: https://github.com/bvanassche/scst/blob/adfc65513915176d9d85a9e9c734d0b298a66991/scst/src/scst_lib.c#L12117 Thanks, Bart. -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
