Linux Watchdog
[Prev Page][Next Page]
- Re: [PATCH V2 1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations, (continued)
- [PATCH 1/3] watchdog: mtk_wdt: remove mt8xxx-resets.h,
Crystal Guo
- [PATCH 1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations,
Anson Huang
- [PATCH][next] watchdog: sc1200wdt: Use fallthrough pseudo-keyword,
Gustavo A. R. Silva
- [PATCH v3] rtc: ds1307: provide an indication that the watchdog has fired,
Chris Packham
- [PATCH v2] rtc: ds1307: provide an indication that the watchdog has fired,
Chris Packham
- [PATCH v6 00/13] Add support for Kontron sl28cpld,
Michael Walle
- [PATCH v6 04/13] irqchip: add sl28cpld interrupt controller support, Michael Walle
- [PATCH v6 10/13] arm64: dts: freescale: sl28: map GPIOs to input events, Michael Walle
- [PATCH v6 11/13] arm64: dts: freescale: sl28: enable LED support, Michael Walle
- [PATCH v6 12/13] arm64: dts: freescale: sl28: enable fan support, Michael Walle
- [PATCH v6 13/13] arm64: defconfig: enable the sl28cpld board management controller, Michael Walle
- [PATCH v6 08/13] hwmon: add support for the sl28cpld hardware monitoring controller, Michael Walle
- [PATCH v6 09/13] arm64: dts: freescale: sl28: enable sl28cpld, Michael Walle
- [PATCH v6 02/13] dt-bindings: mfd: Add bindings for sl28cpld, Michael Walle
- [PATCH v6 07/13] gpio: add support for the sl28cpld GPIO controller, Michael Walle
- [PATCH v6 06/13] pwm: add support for sl28cpld PWM controller, Michael Walle
- [PATCH v6 05/13] watchdog: add support for sl28cpld watchdog, Michael Walle
- [PATCH v6 01/13] mfd: add simple regmap based I2C driver, Michael Walle
- [PATCH v6 03/13] mfd: simple-mfd-i2c: add sl28cpld support, Michael Walle
- [PATCH] rtc: ds1307: provide an indication that the watchdog has fired,
Chris Packham
- [PATCH 0/4] Add basic node support for Mediatek MT8192 SoC,
Seiya Wang
- [PATCH][next] watchdog: scx200_wdt: Use fallthrough pseudo-keyword,
Gustavo A. R. Silva
- [PATCHv4 0/4] watchdog: rti-wdt: attach to running timer,
Tero Kristo
- [PATCH v4] watchdog: initialize device before misc_register, Krzysztof Sobota
- Re: [PATCH v3] watchdog: initialize device before misc_register, Guenter Roeck
- [PATCH] watchdog: initialize device before misc_register,
krzysztof.sobota@xxxxxxxxx
- [PATCH 00/20] Add support for [H]SCIF/TMU/CMT/THS/SDHI/MSIOF/CAN[FD]/I2C/IIC/RWDT on R8A774E1,
Lad Prabhakar
- [PATCH 02/20] dt-bindings: thermal: rcar-gen3-thermal: Add r8a774e1 support, Lad Prabhakar
- [PATCH 03/20] thermal: rcar_gen3_thermal: Add r8a774e1 support, Lad Prabhakar
- [PATCH 04/20] arm64: dts: renesas: r8a774e1: Add RZ/G2H thermal support, Lad Prabhakar
- [PATCH 05/20] dt-bindings: timer: renesas,cmt: Document r8a774e1 CMT support, Lad Prabhakar
- [PATCH 06/20] arm64: dts: renesas: r8a774e1: Add CMT device nodes, Lad Prabhakar
- [PATCH 07/20] dt-bindings: timer: renesas,tmu: Document r8a774e1 bindings, Lad Prabhakar
- [PATCH 08/20] arm64: dts: renesas: r8a774e1: Add TMU device nodes, Lad Prabhakar
- [PATCH 09/20] arm64: dts: renesas: r8a774e1: Add SCIF and HSCIF nodes, Lad Prabhakar
- [PATCH 12/20] dt-bindings: i2c: renesas,iic: Document r8a774e1 support, Lad Prabhakar
- [PATCH 14/20] dt-bindings: spi: renesas,sh-msiof: Add r8a774e1 support, Lad Prabhakar
- [PATCH 15/20] arm64: dts: renesas: r8a774e1: Add MSIOF nodes, Lad Prabhakar
- [PATCH 16/20] dt-bindings: watchdog: renesas,wdt: Document r8a774e1 support, Lad Prabhakar
- [PATCH 17/20] arm64: dts: renesas: r8a774e1: Add RWDT node, Lad Prabhakar
- [PATCH 18/20] dt-bindings: can: rcar_can: Document r8a774e1 support, Lad Prabhakar
- [PATCH 20/20] arm64: dts: renesas: r8a774e1: Add CAN[FD] support, Lad Prabhakar
- [PATCH 19/20] dt-bindings: can: rcar_canfd: Document r8a774e1 support, Lad Prabhakar
- [PATCH 13/20] arm64: dts: renesas: r8a774e1: Add I2C and IIC-DVFS support, Lad Prabhakar
- [PATCH 11/20] dt-bindings: i2c: renesas,i2c: Document r8a774e1 support, Lad Prabhakar
- [PATCH 10/20] arm64: dts: renesas: r8a774e1: Add SDHI nodes, Lad Prabhakar
- [PATCH 01/20] arm64: dts: renesas: r8a774e1: Add operating points, Lad Prabhakar
- Re: [PATCH 00/20] Add support for [H]SCIF/TMU/CMT/THS/SDHI/MSIOF/CAN[FD]/I2C/IIC/RWDT on R8A774E1, Mark Brown
- [PATCH] watchdog: Replace HTTP links with HTTPS ones,
Alexander A. Klimov
- [PATCHv3 0/4] watchdog: rti: support attach to running timer,
Tero Kristo
- [PATCH] watchdog: pcwd_usb: remove needless check before usb_free_coherent(),
Xu Wang
- [PATCH v4] rtc: rtc-ds1374: wdt: Use watchdog core for watchdog part,
Johnson CH Chen (陳昭勳)
- [PATCH v4] softdog: Add options 'soft_reboot_cmd' and 'soft_active_on_boot',
Woody Lin
- [PATCH] watchdog: Use fallthrough pseudo-keyword,
Gustavo A. R. Silva
- [PATCH v5 00/13] Add support for Kontron sl28cpld,
Michael Walle
- [PATCH v5 01/13] regmap-irq: use fwnode instead of device node in add_irq_chip(), Michael Walle
- [PATCH v5 02/13] mfd: add simple regmap based I2C driver, Michael Walle
- [PATCH v5 11/13] arm64: dts: freescale: sl28: map GPIOs to input events, Michael Walle
- [PATCH v5 13/13] arm64: dts: freescale: sl28: enable fan support, Michael Walle
- [PATCH v5 12/13] arm64: dts: freescale: sl28: enable LED support, Michael Walle
- [PATCH v5 10/13] arm64: dts: freescale: sl28: enable sl28cpld, Michael Walle
- [PATCH v5 08/13] gpio: add support for the sl28cpld GPIO controller, Michael Walle
- [PATCH v5 09/13] hwmon: add support for the sl28cpld hardware monitoring controller, Michael Walle
- [PATCH v5 07/13] pwm: add support for sl28cpld PWM controller, Michael Walle
- [PATCH v5 05/13] irqchip: add sl28cpld interrupt controller support, Michael Walle
- [PATCH v5 06/13] watchdog: add support for sl28cpld watchdog, Michael Walle
- [PATCH v5 04/13] mfd: simple-mfd-i2c: add sl28cpld support, Michael Walle
- [PATCH v5 03/13] dt-bindings: mfd: Add bindings for sl28cpld, Michael Walle
- [PATCH v3 1/1] watchdog: Add common nowayout parameter to booke_wdt driver,
Timothy Myers
- [PATCH v3] rtc: rtc-ds1374: wdt: Use watchdog core for watchdog part,
Johnson CH Chen (陳昭勳)
- [PATCHv2] watchdog: rti-wdt: support attaching to running wdt,
Tero Kristo
- [PATCH v2] rtc: rtc-ds1374: wdt: Use watchdog core for watchdog part,
Johnson CH Chen (陳昭勳)
- [PATCH v3] softdog: Add options 'soft_reboot_cmd' and 'soft_active_on_boot',
Woody Lin
- [PATCH] rtc: ds1374: wdt: Use watchdog core for watchdog part,
Johnson CH Chen (陳昭勳)
- Re: [PATCH 1/1] watchdog: Add common nowayout parameter to booke_wdt driver,
Guenter Roeck
- <Possible follow-ups>
- Re: [PATCH 1/1] watchdog: Add common nowayout parameter to booke_wdt driver, Guenter Roeck
[RESEND PATCHv3 0/2] Convert QCOM watchdog timer bindings to YAML,
Sai Prakash Ranjan
[PATCH 0/2] watchdog: rti: adjust initial ping for attach,
Tero Kristo
[PATCH 3/3] watchdog: ds1374_wdt: Introduce Dallas/Maxim DS1374 Watchdog driver,
Johnson CH Chen (陳昭勳)
[PATCH 2/3] rtc: rtc-ds1374: Move out Watchdog function and I2C client, Johnson CH Chen (陳昭勳)
[PATCH 1/3] mfd: ds1374: Introduce Dallas/Maxim DS1374 MFD core driver,
Johnson CH Chen (陳昭勳)
[PATCH 0/3] Use MFD for Dallas/Maxim DS1374 driver series,
Johnson CH Chen (陳昭勳)
[PATCH 00/10] Convert the IPMI watchdog to use the watchdog,
minyard
- [PATCH 02/10] watchdog: Add read capability, minyard
- [PATCH 03/10] watchdog: Add documentation for read capability, minyard
- [PATCH 01/10] watchdog: Ignore stop_on_reboot if no stop function, minyard
- [PATCH 05/10] watchdog: Export an interface to start the watchdog, minyard
- [PATCH 07/10] ipmi:watchdog: Allow the reboot timeout to be specified, minyard
- [PATCH 04/10] watchdog: Add functions to set the timeout and pretimeout, minyard
- [PATCH 08/10] watchdog: Add a way to extend the timeout on a reboot, minyard
- [PATCH 09/10] ipmi:watchdog: Convert over to watchdog framework reboot handling, minyard
- [PATCH 06/10] ipmi:watchdog: Convert over to the watchdog framework, minyard
- [PATCH 10/10] ipmi:watchdog: Add the op to get the current timeout, minyard
[PATCH 0/6] watchdog: Add millisecond-level capabilities,
minyard
[PATCH AUTOSEL 5.7 263/388] watchdog: da9062: No need to ping manually before setting timeout, Sasha Levin
[PATCH AUTOSEL 5.4 177/266] watchdog: da9062: No need to ping manually before setting timeout, Sasha Levin
[PATCH AUTOSEL 4.19 111/172] watchdog: da9062: No need to ping manually before setting timeout, Sasha Levin
[PATCH AUTOSEL 4.4 45/60] watchdog: da9062: No need to ping manually before setting timeout, Sasha Levin
[PATCH AUTOSEL 4.9 58/80] watchdog: da9062: No need to ping manually before setting timeout, Sasha Levin
[PATCH AUTOSEL 4.14 072/108] watchdog: da9062: No need to ping manually before setting timeout, Sasha Levin
Millisecond level watchdog interface,
Corey Minyard
[PATCH v2] softdog: Add options 'soft_reboot_target' and 'soft_active_on_boot',
Woody Lin
[PATCH] drivers\watchdog: Use kobj_to_dev() API,
Wang Qing
[PATCH v1 0/8] watchdog: f71808e_wdt: migrate to kernel,
Ahmad Fatoum
[PATCH 0/2] Driver for watchdog timer on Intel Lightning Mountain SoC,
Dilip Kota
[PATCH v4 00/11] Add support for Kontron sl28cpld,
Michael Walle
- [PATCH v4 01/11] dt-bindings: mfd: Add bindings for sl28cpld, Michael Walle
- [PATCH v4 03/11] irqchip: add sl28cpld interrupt controller support, Michael Walle
- [PATCH v4 09/11] arm64: dts: freescale: sl28: map GPIOs to input events, Michael Walle
- [PATCH v4 08/11] arm64: dts: freescale: sl28: enable sl28cpld, Michael Walle
- [PATCH v4 10/11] arm64: dts: freescale: sl28: enable LED support, Michael Walle
- [PATCH v4 11/11] arm64: dts: freescale: sl28: enable fan support, Michael Walle
- [PATCH v4 05/11] pwm: add support for sl28cpld PWM controller, Michael Walle
- [PATCH v4 04/11] watchdog: add support for sl28cpld watchdog, Michael Walle
- [PATCH v4 06/11] gpio: add support for the sl28cpld GPIO controller, Michael Walle
- [PATCH v4 07/11] hwmon: add support for the sl28cpld hardware monitoring controller, Michael Walle
- [PATCH v4 02/11] mfd: Add support for Kontron sl28cpld management controller, Michael Walle
- Re: [PATCH v4 00/11] Add support for Kontron sl28cpld, Lee Jones
[PATCH] rtc: pcf2127: watchdog: handle nowayout feature,
Bruno Thomsen
[GIT PULL REQUEST] watchdog - v5.8 Merge window,
Wim Van Sebroeck
[PATCH] softdog: Add options 'soft_reboot_target' and 'soft_active_on_boot',
Woody Lin
[PATCH] MAINTAINERS: rectify entry in ARM SMC WATCHDOG DRIVER,
Lukas Bulwahn
[PATCH v4 0/7] watchdog: dw_wdt: Take Baikal-T1 DW WDT peculiarities into account,
Serge Semin
[PATCH] watchdog: sunxi_wdt: fix improper error exit code,
Frank Lee
[PATCH] watchdog: test_bit() => watchdog_active(),
Bumsik Kim
[PATCH v2] dt-bindings: watchdog: renesas,wdt: Document r8a7742 support,
Lad Prabhakar
[PATCH v3 0/7] watchdog: dw_wdt: Take Baikal-T1 DW WDT peculiarities into account,
Serge Semin
watchdog: iTCO_wdt: cannot register miscdev on minor=130 (err=-16).,
Paul Menzel
[PATCH] watchdog: bcm_kona_wdt: Use correct return value for bcm_kona_wdt_probe(),
Tiezhu Yang
[PATCH] watchdog: Fix runtime PM imbalance on error,
Dinghao Liu
[PATCH] watchdog: gef_wdt.c: convert to module_platform_driver(), Harshal Chaudhari
[PATCH 00/17] RZ/G1H describe I2C, IIC, MMC0, SATA, AVB, RWDT and APMU nodes,
Lad Prabhakar
- [PATCH 01/17] dt-bindings: i2c: renesas,i2c: Document r8a7742 support, Lad Prabhakar
- [PATCH 06/17] ARM: dts: r8a7742: Add SDHI nodes, Lad Prabhakar
- [PATCH 07/17] ARM: dts: r8a7742: Add MMC0 node, Lad Prabhakar
- [PATCH 08/17] dt-bindings: ata: renesas,rcar-sata: Add r8a7742 support, Lad Prabhakar
- [PATCH 09/17] ARM: dts: r8a7742: Add sata nodes, Lad Prabhakar
- [PATCH 11/17] dt-bindings: net: renesas,ether: Document R8A7742 SoC, Lad Prabhakar
- [PATCH 13/17] ARM: dts: r8a7742: Add Ether support, Lad Prabhakar
- [PATCH 16/17] dt-bindings: watchdog: renesas,wdt: Document r8a7742 support, Lad Prabhakar
- [PATCH 14/17] dt-bindings: power: renesas,apmu: Document r8a7742 support, Lad Prabhakar
- [PATCH 15/17] ARM: dts: r8a7742: Add APMU nodes, Lad Prabhakar
- [PATCH 17/17] ARM: dts: r8a7742: Add RWDT node, Lad Prabhakar
- [PATCH 12/17] ARM: dts: r8a7742: Add Ethernet AVB support, Lad Prabhakar
- [PATCH 10/17] dt-bindings: net: renesas,ravb: Add support for r8a7742 SoC, Lad Prabhakar
- [PATCH 05/17] mmc: renesas_sdhi_sys_dmac: Add support for r8a7742 SoC, Lad Prabhakar
- [PATCH 04/17] dt-bindings: mmc: renesas,sdhi: Document r8a7742 support, Lad Prabhakar
- [PATCH 03/17] ARM: dts: r8a7742: Add I2C and IIC support, Lad Prabhakar
- [PATCH 02/17] dt-bindings: i2c: renesas,iic: Document r8a7742 support, Lad Prabhakar
[PATCH] dt-bindings: watchdog: Convert UniPhier watchdog timer to json-schema,
Kunihiko Hayashi
watchdog: m54xx: Add missing include,
Thomas Gleixner
Re: [RFC] driver: Adding helper macro for platform_driver boilerplate.,
Guenter Roeck
[PATCH v6 0/2] Add a watchdog driver that uses ARM Secure Monitor Calls.,
Evan Benn
[PATCH v4 0/4] support watchdog with longer timeout period,
michaelsh
[PATCH v3 0/4] support watchdog with longer timeout period,
michaelsh
[PATCH] watchdog: update email address in conversion doc,
Wolfram Sang
[PATCH] watchdog: imx2_wdt: update contact email,
Wolfram Sang
[PATCH] watchdog: iTCO: fix link error,
Arnd Bergmann
[PATCH v2 0/4] support watchdog with longer timeout period,
michaelsh
[PATCH] watchdog: riowd: remove unneeded semicolon,
Jason Yan
[PATCH] dt-bindings: watchdog: renesas-wdt: Convert to json-schema,
Geert Uytterhoeven
[PATCH v3 00/16] Add support for Kontron sl28cpld,
Michael Walle
- [PATCH v3 01/16] include/linux/ioport.h: add helper to define REG resource constructs, Michael Walle
- [PATCH v3 09/16] gpiolib: Introduce gpiochip_irqchip_add_domain(), Michael Walle
- [PATCH v3 13/16] arm64: dts: freescale: sl28: enable sl28cpld, Michael Walle
- [PATCH v3 10/16] gpio: add a reusable generic gpio_chip using regmap, Michael Walle
- [PATCH v3 11/16] gpio: add support for the sl28cpld GPIO controller, Michael Walle
- [PATCH v3 14/16] arm64: dts: freescale: sl28: map GPIOs to input events, Michael Walle
- [PATCH v3 16/16] arm64: dts: freescale: sl28: enable fan support, Michael Walle
- [PATCH v3 15/16] arm64: dts: freescale: sl28: enable LED support, Michael Walle
- [PATCH v3 12/16] hwmon: add support for the sl28cpld hardware monitoring controller, Michael Walle
- [PATCH v3 08/16] pwm: add support for sl28cpld PWM controller, Michael Walle
- [PATCH v3 04/16] dt-bindings: mfd: Add bindings for sl28cpld, Michael Walle
[Index of Archives]
[Linux Kernel Development]
[Security]
[Linux ARM Kernel]
[Linux MIPS]
[Linux S390]
[Bugtraq]
[Fedora ARM]
