Linux Watchdog

• Thread Index

• [PATCH v6 07/12] EDAC, pnd2: Use proper I/O accessors and address space annotation
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v6 02/12] pinctrl: intel: Check against matching data instead of ACPI companion
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] mfd: max77714: update Luca Ceresoli's e-mail address
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: update Luca Ceresoli's e-mail address
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: update Luca Ceresoli's e-mail address
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: faraday: Fix typo in example 'timeout-sec' property
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/6] dt-bindings: update Luca Ceresoli's e-mail address
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH 4/6] mfd: max77714: update Luca Ceresoli's e-mail address
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH 1/6] MAINTAINERS: update Luca Ceresoli's e-mail address
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH 3/6] media: i2c: imx274: update Luca Ceresoli's e-mail address
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH 6/6] watchdog: max77620: update Luca Ceresoli's e-mail address
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH 5/6] power: supply: max77976: update Luca Ceresoli's e-mail address
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] watchdog: max77620: update Luca Ceresoli's e-mail address
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: mainline build failure due to 6b47441bed49 ("watchdog: hpe-wdt: Introduce HPE GXP Watchdog")
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: mainline build failure due to 6b47441bed49 ("watchdog: hpe-wdt: Introduce HPE GXP Watchdog")
  • From: "Hawkins, Nick" <nick.hawkins@xxxxxxx>
• Re: mainline build failure due to 6b47441bed49 ("watchdog: hpe-wdt: Introduce HPE GXP Watchdog")
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: gxp: Add missing MODULE_LICENSE
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• mainline build failure due to 6b47441bed49 ("watchdog: hpe-wdt: Introduce HPE GXP Watchdog")
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• [PATCH v2 4/4] watchdog/pseries-wdt: initial support for H_WATCHDOG-based watchdog timers
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [PATCH v2 3/4] powerpc/pseries: register pseries-wdt device with platform bus
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [PATCH v2 2/4] powerpc/pseries: add FW_FEATURE_WATCHDOG flag
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [PATCH v2 1/4] powerpc/pseries: hvcall.h: add H_WATCHDOG opcode, H_NOOP return code
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [PATCH v2 0/4] pseries-wdt: initial support for H_WATCHDOG-based watchdog timers
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• Re: [PATCH v1 13/19] dt-bindings: arm: npcm: Add maintainer
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 4/4] watchdog/pseries-wdt: initial support for PAPR H_WATCHDOG timers
  • From: Alexey Kardashevskiy <aik@xxxxxxxxx>
• Re: [GIT PULL REQUEST] watchdog - v5.19 Merge window
  • From: pr-tracker-bot@xxxxxxxxxx
• [GIT PULL REQUEST] watchdog - v5.19 Merge window
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 4/4] watchdog/pseries-wdt: initial support for PAPR H_WATCHDOG timers
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• Re: [PATCH v1 4/4] watchdog/pseries-wdt: initial support for PAPR H_WATCHDOG timers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v1 4/4] watchdog/pseries-wdt: initial support for PAPR H_WATCHDOG timers
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• Re: [PATCH v1 4/4] watchdog/pseries-wdt: initial support for PAPR H_WATCHDOG timers
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• Re: [PATCH 09/11] dt-bindings: watchdog: Add binding for Qcom SDX65
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 08/11] ARM: dts: qcom: sdx65-mtp: Increase the vmalloc size
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 10/11] ARM: dts: qcom: sdx65: Add Watchdog support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 09/11] dt-bindings: watchdog: Add binding for Qcom SDX65
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 04/11] dt-bindings: firmware: scm: Add compatible for SDX65
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 03/11] ARM: dts: qcom: sdx65: Add IMEM and PIL info region
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH 02/11] ARM: dts: qcom: sdx65: Add modem SMP2P node
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH 05/11] ARM: dts: qcom: sdx65: Add SCM node
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH 00/11] Devicetree Changes SDX65
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH 01/11] ARM: dts: qcom: sdx65: Add CPUFreq support
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH 09/11] dt-bindings: watchdog: Add binding for Qcom SDX65
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH 08/11] ARM: dts: qcom: sdx65-mtp: Increase the vmalloc size
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH 10/11] ARM: dts: qcom: sdx65: Add Watchdog support
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH 04/11] dt-bindings: firmware: scm: Add compatible for SDX65
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH 06/11] ARM: dts: qcom: sdx65: Add Modem remoteproc node
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH 07/11] ARM: dts: qcom: sdx65-mtp: Enable modem
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH 11/11] ARM: dts: qcom: sdx65: Add pshold support
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH 17/17] arm64: dts: mediatek: add mt8365-evk board device-tree
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 15/17] arm64: dts: mediatek: add mt6357 device-tree
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 14/17] dt-bindings: usb: mediatek,mtk-xhci: add MT8365 SoC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 12/17] dt-bindings: phy: mediatek,tphy: add MT8365 SoC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 13/17] dt-bindings: usb: mediatek,mtu3: add MT8365 SoC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 10/17] dt-bindings: serial: mediatek: add MT8365 bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 11/17] dt-bindings: phy: mediatek,dsi-phy: Add MT8365 SoC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 08/17] dt-bindings: watchdog: mtk-wdt: Add MT8365 SoC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 09/17] dt-bindings: spi: mt65xx: add MT8365 SoC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 07/17] dt-bindings: nvmem: mediatek,efuse: add MT8365 bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 06/17] dt-bindings: iio: adc: mediatek: add MT8365 SoC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 05/17] dt-bindings: dma: mediatek,uart-dma: add MT8365 bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 04/17] dt-bindings: arm: mediatek: Add binding for mt8365-evk board
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 01/17] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 03/17] dt-bindings: mmc: mtk-sd: add bindings for MT8365 SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 02/17] dt-bindings: memory: add mt8365 SoC binding documentation
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 00/17] Add support for MT8365 EVK board
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 14/17] dt-bindings: usb: mediatek,mtk-xhci: add MT8365 SoC bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 06/17] dt-bindings: iio: adc: mediatek: add MT8365 SoC bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 08/17] dt-bindings: watchdog: mtk-wdt: Add MT8365 SoC bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 02/17] dt-bindings: memory: add mt8365 SoC binding documentation
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 01/17] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 07/17] dt-bindings: nvmem: mediatek,efuse: add MT8365 bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 03/17] dt-bindings: mmc: mtk-sd: add bindings for MT8365 SoC
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 17/17] arm64: dts: mediatek: add mt8365-evk board device-tree
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 09/17] dt-bindings: spi: mt65xx: add MT8365 SoC bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 13/17] dt-bindings: usb: mediatek,mtu3: add MT8365 SoC bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 11/17] dt-bindings: phy: mediatek,dsi-phy: Add MT8365 SoC bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 05/17] dt-bindings: dma: mediatek,uart-dma: add MT8365 bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 10/17] dt-bindings: serial: mediatek: add MT8365 bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 15/17] arm64: dts: mediatek: add mt6357 device-tree
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 12/17] dt-bindings: phy: mediatek,tphy: add MT8365 SoC bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 00/17] Add support for MT8365 EVK board
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 04/17] dt-bindings: arm: mediatek: Add binding for mt8365-evk board
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• Re: [PATCH v1 07/19] dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• Re: [PATCH v1 00/19] Introduce Nuvoton Arbel NPCM8XX BMC SoC
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] watchdog: f71808e_wdt: Add check for platform_driver_register
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: f71808e_wdt: Add check for platform_driver_register
  • From: Jiasheng Jiang <jiasheng@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: faraday: Fix typo in example 'timeout-sec' property
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: faraday: Fix typo in example 'timeout-sec' property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 4/4] watchdog/pseries-wdt: initial support for PAPR H_WATCHDOG timers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v1 4/4] watchdog/pseries-wdt: initial support for PAPR H_WATCHDOG timers
  • From: Alexey Kardashevskiy <aik@xxxxxxxxx>
• [PATCH v3] dt-bindings: watchdog: toshiba,visconti-wdt: Update the common clock properties
  • From: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
• RE: [PATCH v2] dt-bindings: watchdog: toshiba,visconti-wdt: Update the common clock properties
  • From: <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
• Re: [PATCH v1 11/19] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• Re: [PATCH] watchdog: change "char *" string form to "char []"
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: change "char *" string form to "char []"
  • From: Yu Zhe <yuzhe@xxxxxxxxxxxx>
• Re: [PATCH v3 0/4] simatic-ipc additions to p2sb apl lake gpio
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] platform/x86: simatic-ipc: drop custom P2SB bar code
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 18/19] arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 11/19] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 11/19] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 11/19] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v1 11/19] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 11/19] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 11/19] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v1 17/19] arm64: dts: nuvoton: Add initial NPCM8XX device tree
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 17/19] arm64: dts: nuvoton: Add initial NPCM8XX device tree
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v1 09/19] dt-bindings: reset: add syscon property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 00/19] Introduce Nuvoton Arbel NPCM8XX BMC SoC
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v1 04/19] tty: serial: 8250: Add NPCM845 UART support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v8 0/8] Introduce HPE GXP Architecture
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v1 12/19] reset: npcm: Add NPCM8XX support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v1 04/19] tty: serial: 8250: Add NPCM845 UART support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• RE: [PATCH 3/4] arm64: dts: exynosautov9: add watchdog DT nodes
  • From: "Chanho Park" <chanho61.park@xxxxxxxxxxx>
• Re: [PATCH v1 18/19] arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v1 18/19] arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 17/19] arm64: dts: nuvoton: Add initial NPCM8XX device tree
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 15/19] dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 15/19] dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 14/19] dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 11/19] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 10/19] reset: npcm: using syscon instead of device data
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 09/19] dt-bindings: reset: add syscon property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 07/19] dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 05/19] dt-bindings: watchdog: npcm: Add npcm845 compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 01/19] dt-bindings: timer: npcm: Add npcm845 compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 03/19] dt-bindings: serial: 8250: Add npcm845 compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 08/19] clk: npcm8xx: add clock controller
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 06/19] watchdog: npcm_wdt: Add NPCM845 watchdog support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v1 19/19] arm64: defconfig: Add Nuvoton NPCM family support
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 05/19] dt-bindings: watchdog: npcm: Add npcm845 compatible string
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 00/19] Introduce Nuvoton Arbel NPCM8XX BMC SoC
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 12/19] reset: npcm: Add NPCM8XX support
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 17/19] arm64: dts: nuvoton: Add initial NPCM8XX device tree
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 08/19] clk: npcm8xx: add clock controller
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 18/19] arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 13/19] dt-bindings: arm: npcm: Add maintainer
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 11/19] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 10/19] reset: npcm: using syscon instead of device data
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 07/19] dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 09/19] dt-bindings: reset: add syscon property
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 16/19] arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 01/19] dt-bindings: timer: npcm: Add npcm845 compatible string
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 14/19] dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 15/19] dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 04/19] tty: serial: 8250: Add NPCM845 UART support
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 02/19] clocksource: timer-npcm7xx: Add NPCM845 timer support
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 03/19] dt-bindings: serial: 8250: Add npcm845 compatible string
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 06/19] watchdog: npcm_wdt: Add NPCM845 watchdog support
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 4/4] watchdog/pseries-wdt: initial support for PAPR H_WATCHDOG timers
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [PATCH v1 2/4] powerpc/pseries: add FW_FEATURE_WATCHDOG flag
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [PATCH v1 3/4] powerpc/pseries: register pseries-wdt device with platform bus
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [PATCH v1 1/4] powerpc/pseries: hvcall.h: add H_WATCHDOG opcode, H_NOOP return code
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [PATCH v1 0/4] pseries-wdt: initial support for PAPR virtual watchdog timers
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/4] powerpc/pseries: hvcall.h: add H_WATCHDOG opcode, H_NOOP return code
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v1 4/4] watchdog/pseries-wdt: initial support for PAPR H_WATCHDOG timers
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [PATCH v1 2/4] powerpc/pseries: add FW_FEATURE_WATCHDOG flag
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [PATCH v1 3/4] powerpc/pseries: register pseries-wdt device with platform bus
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [PATCH v1 1/4] powerpc/pseries: hvcall.h: add H_WATCHDOG opcode, H_NOOP return code
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] watchdog: s3c2410_wdt: support exynosautov9 watchdog
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/4] arm64: dts: exynosautov9: add watchdog DT nodes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: watchdog: add exynosautov9 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 4/4] arm64: dts: exynosautov9-sadk: enable watchdog devices
  • From: Chanho Park <chanho61.park@xxxxxxxxxxx>
• [PATCH 3/4] arm64: dts: exynosautov9: add watchdog DT nodes
  • From: Chanho Park <chanho61.park@xxxxxxxxxxx>
• [PATCH 2/4] watchdog: s3c2410_wdt: support exynosautov9 watchdog
  • From: Chanho Park <chanho61.park@xxxxxxxxxxx>
• [PATCH 0/4] support watchdog for exynosautov9
  • From: Chanho Park <chanho61.park@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: watchdog: add exynosautov9 compatible
  • From: Chanho Park <chanho61.park@xxxxxxxxxxx>
• [PATCH v2] dt-bindings: watchdog: toshiba,visconti-wdt: Update the common clock properties
  • From: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: watchdog: toshiba,visconti-wdt: Update the common clock properties
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH v8 0/8] Introduce HPE GXP Architecture
  • From: "Hawkins, Nick" <nick.hawkins@xxxxxxx>
• Re: [PATCH v8 0/8] Introduce HPE GXP Architecture
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v3 3/7] watchdog: npcm: Enable clock if provided
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• Re: [PATCH v8 3/8] watchdog: hpe-wdt: Introduce HPE GXP Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v8 3/8] watchdog: hpe-wdt: Introduce HPE GXP Watchdog
  • From: nick.hawkins@xxxxxxx
• [PATCH v8 0/8] Introduce HPE GXP Architecture
  • From: nick.hawkins@xxxxxxx
• Re: [PATCH 4/7] dt-bindings: renesas,rcar-dmac: R-Car V3U is R-Car Gen4
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 7/7] dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas,wdt: Document RZ/G2UL SoC
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: Add SC8180X and SC8280XP compatibles
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: rti_wdt: Fix calculation and evaluation of preset heartbeat
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: imx6: phyFLEX: disable da9063 watchdog during suspend
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/3] watchdog: da9063: optionally disable watchdog during suspend
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: mfd: da9063: watchdog: add suspend disable option
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] watchdog: simatic-ipc-wdt: convert to use P2SB accessor
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3 0/4] simatic-ipc additions to p2sb apl lake gpio
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v3 1/4] leds: simatic-ipc-leds: convert to use P2SB accessor
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v3 4/4] leds: simatic-ipc-leds-gpio: add GPIO version of Siemens driver
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v3 3/4] platform/x86: simatic-ipc: drop custom P2SB bar code
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v3 2/4] watchdog: simatic-ipc-wdt: convert to use P2SB accessor
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] leds: simatic-ipc-leds-gpio: add GPIO version of Siemens driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] watchdog: simatic-ipc-wdt: convert to use P2SB accessor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] watchdog: simatic-ipc-wdt: convert to use P2SB accessor
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] leds: simatic-ipc-leds-gpio: add GPIO version of Siemens driver
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] watchdog: simatic-ipc-wdt: convert to use P2SB accessor
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/4] watchdog: simatic-ipc-wdt: convert to use P2SB accessor
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 0/4] simatic-ipc additions to p2sb apl lake gpio
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 4/4] leds: simatic-ipc-leds-gpio: add GPIO version of Siemens driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 4/4] leds: simatic-ipc-leds-gpio: add GPIO version of Siemens driver
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v2 4/4] leds: simatic-ipc-leds-gpio: add GPIO version of Siemens driver
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v2 3/4] platform/x86: simatic-ipc: drop custom P2SB bar code
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v2 0/4] simatic-ipc additions to p2sb apl lake gpio
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v2 1/4] leds: simatic-ipc-leds: convert to use P2SB accessor
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v2 2/4] watchdog: simatic-ipc-wdt: convert to use P2SB accessor
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH] watchdog: ts4800_wdt: Fix refcount leak in ts4800_wdt_probe
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: ts4800_wdt: Fix refcount leak in ts4800_wdt_probe
  • From: Miaoqian Lin <linmq006@xxxxxxxxx>
• RE: [PATCH 2/3] watchdog: da9063: optionally disable watchdog during suspend
  • From: DLG Adam Thomson <DLG-Adam.Thomson.Opensource@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] watchdog: da9063: optionally disable watchdog during suspend
  • From: Primoz Fiser <primoz.fiser@xxxxxxxxx>
• RE: [PATCH 1/3] dt-bindings: mfd: da9063: watchdog: add suspend disable option
  • From: DLG Adam Thomson <DLG-Adam.Thomson.Opensource@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: mfd: da9063: watchdog: add suspend disable option
  • From: Primoz Fiser <primoz.fiser@xxxxxxxxx>
• Re: [RFC v2 0/2] Add driver for PAPR watchdog timers
  • From: Alexey Kardashevskiy <aik@xxxxxxxxx>
• Re: [RFC v2 2/2] watchdog: pseries-wdt: initial support for PAPR virtual watchdog timers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC v2 2/2] watchdog: pseries-wdt: initial support for PAPR virtual watchdog timers
  • From: Alexey Kardashevskiy <aik@xxxxxxxxx>
• RE: [PATCH v7 3/8] watchdog: hpe-wdt: Introduce HPE GXP Watchdog
  • From: "Hawkins, Nick" <nick.hawkins@xxxxxxx>
• Re: [PATCH v7 3/8] watchdog: hpe-wdt: Introduce HPE GXP Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC v2 2/2] watchdog: pseries-wdt: initial support for PAPR virtual watchdog timers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC v2 2/2] watchdog: pseries-wdt: initial support for PAPR virtual watchdog timers
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] simatic-ipc additions to p2sb apl lake gpio
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC v2 2/2] watchdog: pseries-wdt: initial support for PAPR virtual watchdog timers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC v2 2/2] watchdog: pseries-wdt: initial support for PAPR virtual watchdog timers
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] simatic-ipc additions to p2sb apl lake gpio
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [RFC v2 2/2] watchdog: pseries-wdt: initial support for PAPR virtual watchdog timers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC v2 2/2] watchdog: pseries-wdt: initial support for PAPR virtual watchdog timers
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [PATCH v3 3/7] watchdog: npcm: Enable clock if provided
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] Watchdog: sp5100_tco: Lower verbosity of disabled watchdog hardware
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] Watchdog: sp5100_tco: Lower verbosity of disabled watchdog hardware
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• Re: [PATCH] Watchdog: sp5100_tco: Lower verbosity of disabled watchdog hardware
  • From: Jerry Hoemann <jerry.hoemann@xxxxxxx>
• Re: [PATCH] Watchdog: sp5100_tco: Lower verbosity of disabled watchdog hardware
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH] Watchdog: sp5100_tco: Lower verbosity of disabled watchdog hardware
  • From: "Limonciello, Mario" <Mario.Limonciello@xxxxxxx>
• Re: [PATCH] Watchdog: sp5100_tco: Lower verbosity of disabled watchdog hardware
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [RFC v2 2/2] watchdog: pseries-wdt: initial support for PAPR virtual watchdog timers
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [RFC v2 0/2] Add driver for PAPR watchdog timers
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [RFC v2 1/2] powerpc/pseries: hvcall.h: add H_WATCHDOG opcode, H_NOOP return code
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [PATCH] Watchdog: sp5100_tco: Lower verbosity of disabled watchdog hardware
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• Re: [PATCH v3 2/7] clocksource: timer-npcm7xx: Enable timer 1 clock before use
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v3 4/7] dt-bindings: clock: Add Nuvoton WPCM450 clock/reset controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH 2/3] watchdog: da9063: optionally disable watchdog during suspend
  • From: DLG Adam Thomson <DLG-Adam.Thomson.Opensource@xxxxxxxxxxxxxx>
• RE: [PATCH 1/3] dt-bindings: mfd: da9063: watchdog: add suspend disable option
  • From: DLG Adam Thomson <DLG-Adam.Thomson.Opensource@xxxxxxxxxxxxxx>
• [PATCH v3 6/7] clk: wpcm450: Add Nuvoton WPCM450 clock/reset controller driver
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH v3 7/7] ARM: dts: wpcm450: Switch clocks to clock controller
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH v3 4/7] dt-bindings: clock: Add Nuvoton WPCM450 clock/reset controller
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH v3 3/7] watchdog: npcm: Enable clock if provided
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH v3 5/7] ARM: dts: wpcm450: Add clock controller node
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH v3 2/7] clocksource: timer-npcm7xx: Enable timer 1 clock before use
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH v3 0/7] Nuvoton WPCM450 clock and reset driver
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH v3 1/7] dt-bindings: timer: nuvoton,npcm7xx-timer: Allow specifying all clocks
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH v3] dt-bindings: watchdog: improve QCOM compatible parsing for modern chips
  • From: David Heidelberg <david@xxxxxxx>
• Re: [PATCH v2] dt-bindings: watchdog: improve QCOM compatible parsing for modern chips
  • From: David Heidelberg <david@xxxxxxx>
• Re: [PATCH v2] dt-bindings: watchdog: improve QCOM compatible parsing for modern chips
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v7 3/8] watchdog: hpe-wdt: Introduce HPE GXP Watchdog
  • From: nick.hawkins@xxxxxxx
• [PATCH v7 0/8] Introduce HPE GXP Architecture
  • From: nick.hawkins@xxxxxxx
• Re: [PATCH 0/2] simatic-ipc additions to p2sb apl lake gpio
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 3/8] watchdog: hpe-wdt: Introduce HPE GXP Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 1/1] watchdog: iTCO_wdt: Using existing macro define covers more scenarios
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: gpio: renesas,rcar-gpio: R-Car V3U is R-Car Gen4
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 1/7] dt-bindings: timer: nuvoton,npcm7xx-timer: Allow specifying all clocks
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: i2c: renesas,rcar-i2c: R-Car V3U is R-Car Gen4
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/7] dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/7] dt-bindings: serial: renesas,scif: R-Car V3U is R-Car Gen4
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/7] dt-bindings: serial: renesas,hscif: R-Car V3U is R-Car Gen4
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/7] dt-bindings: iommu: renesas,ipmmu-vmsa: R-Car V3U is R-Car Gen4
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: i2c: renesas,rcar-i2c: R-Car V3U is R-Car Gen4
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: gpio: renesas,rcar-gpio: R-Car V3U is R-Car Gen4
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] simatic-ipc additions to p2sb apl lake gpio
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• RE: [PATCH v6 3/8] watchdog: hpe-wdt: Introduce HPE GXP Watchdog
  • From: "Hawkins, Nick" <nick.hawkins@xxxxxxx>
• Re: [PATCH 0/2] simatic-ipc additions to p2sb apl lake gpio
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH 0/2] simatic-ipc additions to p2sb apl lake gpio
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/7] dt-bindings: iommu: renesas,ipmmu-vmsa: R-Car V3U is R-Car Gen4
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: mfd: da9063: watchdog: add suspend disable option
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] watchdog: max63xx_wdt: Add support for specifying WDI logic via GPIO
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: watchdog: max63xx: Add GPIO binding
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: watchdog: max63xx: Add GPIO binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 3/8] watchdog: hpe-wdt: Introduce HPE GXP Watchdog
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v6 3/8] watchdog: hpe-wdt: Introduce HPE GXP Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH v6 3/8] watchdog: hpe-wdt: Introduce HPE GXP Watchdog
  • From: "Hawkins, Nick" <nick.hawkins@xxxxxxx>
• Re: [PATCH 6/7] dt-bindings: serial: renesas,scif: R-Car V3U is R-Car Gen4
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 5/7] dt-bindings: serial: renesas,hscif: R-Car V3U is R-Car Gen4
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: renesas,rcar-dmac: R-Car V3U is R-Car Gen4
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/7] dt-bindings: iommu: renesas,ipmmu-vmsa: R-Car V3U is R-Car Gen4
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 7/7] dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: i2c: renesas,rcar-i2c: R-Car V3U is R-Car Gen4
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: gpio: renesas,rcar-gpio: R-Car V3U is R-Car Gen4
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: mfd: da9063: watchdog: add suspend disable option
  • From: Primoz Fiser <primoz.fiser@xxxxxxxxx>
• Re: [PATCH v2 2/2] watchdog: max63xx_wdt: Add support for specifying WDI logic via GPIO
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] watchdog: max63xx_wdt: Add support for specifying WDI logic via GPIO
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [PATCH v6 3/8] watchdog: hpe-wdt: Introduce HPE GXP Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: mfd: da9063: watchdog: add suspend disable option
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v6 3/8] watchdog: hpe-wdt: Introduce HPE GXP Watchdog
  • From: nick.hawkins@xxxxxxx
• [PATCH v6 0/8] Introduce HPE GXP Architecture
  • From: nick.hawkins@xxxxxxx
• Re: [PATCH v2 4/7] dt-bindings: clock: Add Nuvoton WPCM450 clock/reset controller
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH 0/7] dt-bindings: renesas: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 3/7] dt-bindings: iommu: renesas,ipmmu-vmsa: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 2/7] dt-bindings: i2c: renesas,rcar-i2c: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 6/7] dt-bindings: serial: renesas,scif: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 5/7] dt-bindings: serial: renesas,hscif: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 4/7] dt-bindings: renesas,rcar-dmac: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 7/7] dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 1/7] dt-bindings: gpio: renesas,rcar-gpio: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v2 4/7] dt-bindings: clock: Add Nuvoton WPCM450 clock/reset controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC v2 37/39] watchdog: add HAS_IOPORT dependencies
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 3/7] watchdog: npcm: Enable clock if provided
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 0/7] Nuvoton WPCM450 clock and reset driver
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH v2 2/7] clocksource: timer-npcm7xx: Enable timer 1 clock before use
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH v2 3/7] watchdog: npcm: Enable clock if provided
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH v2 1/7] dt-bindings: timer: nuvoton,npcm7xx-timer: Allow specifying all clocks
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH v2 5/7] ARM: dts: wpcm450: Add clock controller node
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH v2 6/7] clk: wpcm450: Add Nuvoton WPCM450 clock/reset controller driver
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH v2 7/7] ARM: dts: wpcm450: Switch clocks to clock controller
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH v2 4/7] dt-bindings: clock: Add Nuvoton WPCM450 clock/reset controller
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• Re: [PATCH 30/37] watchdog: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [RFC v2 37/39] watchdog: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH 30/37] watchdog: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: watchdog: max63xx: Add GPIO binding
  • From: Pali Rohár <pali@xxxxxxxxxx>
• [PATCH v2 2/2] watchdog: max63xx_wdt: Add support for specifying WDI logic via GPIO
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH] watchdog: max63xx_wdt: Add support for specifying WDI logic via GPIO
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH] watchdog: max63xx_wdt: Add support for specifying WDI logic via GPIO
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: max63xx_wdt: Add support for specifying WDI logic via GPIO
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH] watchdog: max63xx_wdt: Add support for specifying WDI logic via GPIO
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/7] clocksource: timer-npcm7xx: Enable timer 1 clock before use
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• Re: [PATCH 2/7] clocksource: timer-npcm7xx: Enable timer 1 clock before use
  • From: Zev Weiss <zweiss@xxxxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: clock: Add Nuvoton WPCM450 clock/reset controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] watchdog: max63xx_wdt: Add support for specifying WDI logic via GPIO
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: clock: Add Nuvoton WPCM450 clock/reset controller
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• Re: [PATCH 4/7] dt-bindings: clock: Add Nuvoton WPCM450 clock/reset controller
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• Re: [PATCH 3/7] watchdog: npcm: Enable clock if provided
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH v7 1/2] dt-bindings: watchdog: renesas,wdt: Add support for RZ/N1
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v7 0/2] ARM: r9a06g032: add support for the watchdogs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v7 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] watchdog: sp805: disable watchdog on remove
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v8 3/3] watchdog: wdat_wdt: Stop watchdog when uninstalling module
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v8 2/3] watchdog: wdat_wdt: Stop watchdog when rebooting the system
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v8 1/3] watchdog: wdat_wdt: Using the existing function to check parameter timeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 06/11] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v8 3/3] watchdog: wdat_wdt: Stop watchdog when uninstalling module
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v8 1/3] watchdog: wdat_wdt: Using the existing function to check parameter timeout
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v8 0/3] Some impovements about acpi hardware watchdog
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v8 2/3] watchdog: wdat_wdt: Stop watchdog when rebooting the system
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• RE: [PATCH v5 06/11] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: "Hawkins, Nick" <nick.hawkins@xxxxxxx>
• Re: [PATCH v5 06/11] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH v5 06/11] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: "Hawkins, Nick" <nick.hawkins@xxxxxxx>
• Re: [PATCH v4 4/4] arm64: dts: Add Mediatek SoC MT8186 dts and evaluation board and Makefile
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH v6 1/1] watchdog: iTCO_wdt: Using existing macro define covers more scenarios
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v7 2/3] watchdog: wdat_wdt: Stop watchdog when rebooting the system
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v7 3/3] watchdog: wdat_wdt: Stop watchdog when uninstalling module
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v7 0/3] Some impovements about acpi hardware watchdog
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v7 1/3] watchdog: wdat_wdt: Using the existing function to check parameter timeout
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v5] watchdog: iTCO_wdg: Using existing macro define covers more scenarios
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v6 1/3] watchdog: wdat_wdg: Using the existing function to check parameter timeout
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v6 0/3] Some impovements about acpi hardware watchdog
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v6 2/3] watchdog: wdat_wdg: Stop watchdog when rebooting the system
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v6 3/3] watchdog: wdat_wdg: Stop watchdog when uninstalling module
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• Re: [PATCH v5] watchdog: wdat_wdg: Using the existed function to check parameter timeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5] watchdog: wdat_wdg: Using the existed function to check parameter timeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v5 1/2] watchdog: wdat_wdg: Stop watchdog when rebooting the system
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v5 2/2] watchdog: wdat_wdg: Stop watchdog when uninstalling module
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v5] watchdog: wdat_wdg: Using the existed function to check parameter timeout
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: clock: Add Nuvoton WPCM450 clock/reset controller
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH v4 4/4] watchdog: iTCO_wdg: Make code more clearly with macro definition
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 4/4] watchdog: iTCO_wdg: Make code more clearly with macro definition
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 4/4] watchdog: iTCO_wdg: Make code more clearly with macro definition
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 1/4] watchdog: wdat_wdg: Using the existed function to check parameter timeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 1/4] watchdog: wdat_wdg: Using the existed function to check parameter timeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 4/4] watchdog: iTCO_wdg: Make code more clearly with macro definition
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v4 4/4] watchdog: iTCO_wdg: Make code more clearly with macro definition
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v4 1/4] watchdog: wdat_wdg: Using the existed function to check parameter timeout
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v4 2/4] watchdog: wdat_wdg: Stop watchdog when rebooting the system
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v4 0/4] Some impovements about watchdog
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v4 3/4] watchdog: wdat_wdg: Stop watchdog when uninstalling module
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v4 3/4] watchdog: wdat_wdg: Stop watchdog when uninstalling module
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v4 2/4] watchdog: wdat_wdg: Stop watchdog when rebooting the system
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v4 4/4] watchdog: iTCO_wdg: Make code more clearly with macro definition
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v3 0/4] Some impovements about watchdog
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v4 1/4] watchdog: wdat_wdg: Using the existed function to check parameter timeout
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] watchdog: iTCO_wdg: Make code more clearly with macro definition
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [PATCH v3 1/4] watchdog: wdat_wdg: Using the existed function to check parameter timeout
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• [PATCH v3 1/4] watchdog: wdat_wdg: Using the existed function to check parameter timeout
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v3 2/4] watchdog: wdat_wdg: Stop watchdog when rebooting the system
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v3 0/4] Some Impovements about watchdog
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v3 3/4] watchdog: wdat_wdg: Stop watchdog when uninstalling module
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v3 4/4] watchdog: iTCO_wdg: Make code more clearly with macro definition
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] watchdog: wdat_wdg: Using the existed function to check parameter timeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] watchdog: wdat_wdg: Using the existed function to check parameter timeout
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [PATCH v5 06/11] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas,wdt: Document RZ/G2UL SoC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] watchdog: wdat_wdg: Stop watchdog when uninstalling module
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v2 1/3] watchdog: wdat_wdg: Using the existed function to check parameter timeout
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v2 2/3] watchdog: wdat_wdg: Stop watchdog when rebooting the system
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v2 0/3] Impovements about acpi hardware watchdog
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: uniphier: Use unevaluatedProperties
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas,wdt: Document RZ/G2UL SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: renesas,wdt: Document RZ/G2UL SoC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v5 06/11] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: clock: Add Nuvoton WPCM450 clock/reset controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/3] watchdog: wdat_wdg: Checking the module parameter timeout
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH 3/3] watchdog: wdat_wdg: Add stop watchdog after unregister
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH 2/3] watchdog: wdat_wdg: Fix the bug stucked after executing reboot
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH 2/7] clocksource: timer-npcm7xx: Enable timer 1 clock before use
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH 0/7] Nuvoton WPCM450 clock and reset driver
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH 3/7] watchdog: npcm: Enable clock if provided
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH 5/7] ARM: dts: wpcm450: Add clock controller node
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH 4/7] dt-bindings: clock: Add Nuvoton WPCM450 clock/reset controller
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH 7/7] ARM: dts: wpcm450: Switch clocks to clock controller
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH 1/7] dt-bindings: timer: nuvoton,npcm7xx-timer: Allow specifying all clocks
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH 6/7] clk: wpcm450: Add Nuvoton WPCM450 clock/reset controller driver
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• Re: [PATCH 3/7] watchdog: npcm: Enable clock if provided
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 3/3] ARM: dts: imx6: phyFLEX: disable da9063 watchdog during suspend
  • From: Primoz Fiser <primoz.fiser@xxxxxxxxx>
• [PATCH 1/3] dt-bindings: mfd: da9063: watchdog: add suspend disable option
  • From: Primoz Fiser <primoz.fiser@xxxxxxxxx>
• [PATCH 2/3] watchdog: da9063: optionally disable watchdog during suspend
  • From: Primoz Fiser <primoz.fiser@xxxxxxxxx>
• Re: [PATCH] Watchdog: Checking timeout invalid if hardware heartbeat range is configured
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] Watchdog: Checking timeout invalid if hardware heartbeat range is configured
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v5 06/11] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: nick.hawkins@xxxxxxx
• [PATCH v5 03/11] drivers: wdt: Introduce HPE GXP SoC Watchdog
  • From: nick.hawkins@xxxxxxx
• [PATCH v5 00/11] Introduce HPE GXP Architecture
  • From: nick.hawkins@xxxxxxx
• [PATCH] Watchdog: Checking timeout invalid if hardware heartbeat range is configured
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• RE: [PATCH v4 06/11] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: "Hawkins, Nick" <nick.hawkins@xxxxxxx>
• RE: [PATCH v4 03/11] drivers: wdt: Introduce HPE GXP SoC Watchdog
  • From: "Hawkins, Nick" <nick.hawkins@xxxxxxx>
• Re: [PATCH v4 06/11] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH v4 06/11] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: "Hawkins, Nick" <nick.hawkins@xxxxxxx>
• Re: [PATCH v4 06/11] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 03/11] drivers: wdt: Introduce HPE GXP SoC Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v4 00/11] ARM: Introduce HPE GXP Architecture
  • From: nick.hawkins@xxxxxxx
• [PATCH v4 06/11] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: nick.hawkins@xxxxxxx
• [PATCH v4 03/11] drivers: wdt: Introduce HPE GXP SoC Watchdog
  • From: nick.hawkins@xxxxxxx
• Re: [PATCH 09/48] watchdog: sa1100: use platform device registration
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 09/48] watchdog: sa1100: use platform device registration
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 05/48] ARM: pxa: split up mach/hardware.h
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [RFC v1 0/2] Add driver for PAPR watchdog timers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC v1 0/2] Add driver for PAPR watchdog timers
  • From: Alexey Kardashevskiy <aik@xxxxxxxxx>
• Re: [RFC v1 0/2] Add driver for PAPR watchdog timers
  • From: Nathan Lynch <nathanl@xxxxxxxxxxxxx>
• [PATCH v2 1/1] watchdog: sp805: disable watchdog on remove
  • From: Eliav Farber <farbere@xxxxxxxxxx>
• [PATCH v2 0/1] Use watchdog_stop_on_unregister() to stop sp805 watchdog when unregistering it
  • From: Eliav Farber <farbere@xxxxxxxxxx>
• Re: [UNVERIFIED SENDER] Re: [PATCH] watchdog: sp805: disable watchdog on remove
  • From: "Farber, Eliav" <farbere@xxxxxxxxxx>
• Re: [RFC v1 2/2] watchdog: pseries-wdt: initial support for PAPR virtual watchdog timers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC v1 2/2] watchdog: pseries-wdt: initial support for PAPR virtual watchdog timers
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [RFC v1 0/2] Add driver for PAPR watchdog timers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: uniphier: Use unevaluatedProperties
  • From: Rob Herring <robh@xxxxxxxxxx>
• [RFC v1 2/2] watchdog: pseries-wdt: initial support for PAPR virtual watchdog timers
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [RFC v1 1/2] powerpc/pseries: hvcall.h: add definitions for H_WATCHDOG hypercall
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [RFC v1 0/2] Add driver for PAPR watchdog timers
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [RFC v1 0/2] Add driver for PAPR watchdog timers
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [RFC v1] Add driver for PAPR virtual watchdog timers
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [no subject]
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [PATCH v6 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: watchdog: renesas,wdt: Add support for RZ/N1
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v6 0/2] ARM: r9a06g032: add support for the watchdogs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: rti-wdt: Fix pm_runtime_get_sync() error checking
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: rti-wdt: Fix pm_runtime_get_sync() error checking
  • From: Miaoqian Lin <linmq006@xxxxxxxxx>
• RE: [PATCH v5 1/5] mfd: da9062: make register CONFIG_I writable
  • From: Christoph Niedermaier <cniedermaier@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: Add SC8180X and SC8280XP compatibles
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: Add SC8180X and SC8280XP compatibles
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v5 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: watchdog: renesas,wdt: Add support for RZ/N1
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v5 0/2] ARM: r9a06g032: add support for the watchdogs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: Add a mechanism to detect stalls on guest vCPUs
  • From: Sebastian Ene <sebastianene@xxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: uniphier: Use unevaluatedProperties
  • From: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: Add a mechanism to detect stalls on guest vCPUs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: watchdog: Add qemu,vm-watchdog compatible
  • From: Sebastian Ene <sebastianene@xxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: Add a mechanism to detect stalls on guest vCPUs
  • From: Sebastian Ene <sebastianene@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: watchdog: Add qemu,vm-watchdog compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 0/2] Detect stalls on guest vCPUS
  • From: Sebastian Ene <sebastianene@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: watchdog: Add qemu,vm-watchdog compatible
  • From: Sebastian Ene <sebastianene@xxxxxxxxxx>
• [PATCH 2/2] watchdog: Add a mechanism to detect stalls on guest vCPUs
  • From: Sebastian Ene <sebastianene@xxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: Add a mechanism to detect stalls on guest vCPUs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH v3 03/10] drivers: wdt: Introduce HPE GXP SoC Watchdog
  • From: "Hawkins, Nick" <nick.hawkins@xxxxxxx>
• Re: [PATCH v3 03/10] drivers: wdt: Introduce HPE GXP SoC Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 03/10] drivers: wdt: Introduce HPE GXP SoC Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 02/12] dt-bindings: watchdog: sunxi: clarify clock support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: sp805: add support for irq
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: sp805: disable watchdog on remove
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: sp805: add support for irq
  • From: Eliav Farber <farbere@xxxxxxxxxx>
• [PATCH] watchdog: sp805: disable watchdog on remove
  • From: Eliav Farber <farbere@xxxxxxxxxx>
• Re: [PATCH v4 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH v5] watchdog: imx2_wdg: Allow ping on suspend
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [GIT PULL REQUEST] watchdog - v5.18 Merge window
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [GIT PULL REQUEST] watchdog - v5.18 Merge window
  • From: Rafał Miłecki <rafal@xxxxxxxxxx>
• [GIT PULL REQUEST] watchdog - v5.18 Merge window
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [PATCH v4 1/4] dt-bindings: timer: Add compatible for Mediatek MT8186
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: watchdog: renesas,wdt: Add support for RZ/N1
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v4 0/2] ARM: r9a06g032: add support for the watchdogs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v4 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v5] watchdog: imx2_wdg: Allow ping on suspend
  • From: Alistair Francis <alistair@xxxxxxxxxxxxx>
• Re: linux resetting when the usb storage was removed while copying
  • From: qianfan <qianfanguijin@xxxxxxx>
• Re: [PATCH v4 4/4] arm64: dts: Add Mediatek SoC MT8186 dts and evaluation board and Makefile
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: linux resetting when the usb storage was removed while copying
  • From: OGAWA Hirofumi <hirofumi@xxxxxxxxxxxxxxxxxx>
• Re: linux resetting when the usb storage was removed while copying
  • From: qianfan <qianfanguijin@xxxxxxx>
• Re: [PATCH v4] watchdog: imx2_wdg: Allow ping on suspend
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: linux resetting when the usb storage was removed while copying
  • From: OGAWA Hirofumi <hirofumi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/12] dt-bindings: watchdog: sunxi: clarify clock support
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• Re: [PATCH v2 01/12] dt-bindings: watchdog: sunxi: fix F1C100s compatible
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• Re: [PATCH v2 02/12] dt-bindings: watchdog: sunxi: clarify clock support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: iTCO_wdt on Intel NUC11TNBi5
  • From: Kévin L'hôpital <kevin.lhopital@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 1/2] dt-bindings: watchdog: Add watchdog yaml file for Sunplus SP7021
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v8 2/2] watchdog: Add watchdog driver for Sunplus SP7021
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• [PATCH v8 0/2] Add watchdog driver for Sunplus SP7021 SoC
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• [PATCH v8 1/2] dt-bindings: watchdog: Add watchdog yaml file for Sunplus SP7021
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• Re: [PATCH v4] watchdog: imx2_wdg: Allow ping on suspend
  • From: Alistair <alistair@xxxxxxxxxxxxx>
• Re: [PATCH v4] watchdog: imx2_wdg: Allow ping on suspend
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v4] watchdog: imx2_wdg: Allow ping on suspend
  • From: Alistair Francis <alistair@xxxxxxxxxxxxx>
• Re: [PATCH] watchdog: gpio_wdt: Support GPO lines with the toggle algorithm
  • From: Tobias Waldekranz <tobias@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: gpio_wdt: Support GPO lines with the toggle algorithm
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: gpio_wdt: Support GPO lines with the toggle algorithm
  • From: Tobias Waldekranz <tobias@xxxxxxxxxxxxxx>
• Re: [PATCH] drivers: watchdog: omap_wdt: ensure working trigger pattern
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] drivers: watchdog: omap_wdt: ensure working trigger pattern
  • From: Sondhauß, Jan <Jan.Sondhauss@xxxxxxxx>
• Re: [PATCH] drivers: watchdog: omap_wdt: ensure working trigger pattern
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: linux resetting when the usb storage was removed while copying
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] drivers: watchdog: omap_wdt: ensure working trigger pattern
  • From: Sondhauß, Jan <Jan.Sondhauss@xxxxxxxx>
• Re: linux resetting when the usb storage was removed while copying
  • From: qianfan <qianfanguijin@xxxxxxx>
• Re: linux resetting when the usb storage was removed while copying
  • From: OGAWA Hirofumi <hirofumi@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH v7 1/2] dt-bindings: watchdog: Add watchdog yaml file for Sunplus SP7021
  • From: xt.hu[胡先韬] <xt.hu@xxxxxxxxxxx>
• Re: [PATCH v7 1/2] dt-bindings: watchdog: Add watchdog yaml file for Sunplus SP7021
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v8 02/16] clk: Provide new devm_clk helpers for prepared and enabled clocks
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: dev_WARN_ONCE cause gpio-watchdog reset
  • From: qianfan <qianfanguijin@xxxxxxx>
• Re: [PATCH v2 01/12] dt-bindings: watchdog: sunxi: fix F1C100s compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 02/16] clk: Provide new devm_clk helpers for prepared and enabled clocks
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: dev_WARN_ONCE cause gpio-watchdog reset
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: dev_WARN_ONCE cause gpio-watchdog reset
  • From: qianfan <qianfanguijin@xxxxxxx>
• RE: dev_WARN_ONCE cause gpio-watchdog reset
  • From: "Schmid, Carsten" <Carsten_Schmid@xxxxxxxxxx>
• Re: dev_WARN_ONCE cause gpio-watchdog reset
  • From: qianfan <qianfanguijin@xxxxxxx>
• dev_WARN_ONCE cause gpio-watchdog reset
  • From: qianfan <qianfanguijin@xxxxxxx>
• [PATCH v2 03/12] ARM: dts: suniv: F1C100: fix watchdog compatible
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• [PATCH v2 02/12] dt-bindings: watchdog: sunxi: clarify clock support
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• [PATCH v2 01/12] dt-bindings: watchdog: sunxi: fix F1C100s compatible
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• Re: [PATCH v8 11/16] watchdog: Make use of devm_clk_get_enabled()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v8 00/16] clk: provide new devm helpers for prepared and enabled clocks
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 01/14] dt-bindings: watchdog: sunxi: fix F1C100s compatible
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• [PATCH v8 00/16] clk: provide new devm helpers for prepared and enabled clocks
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v8 02/16] clk: Provide new devm_clk helpers for prepared and enabled clocks
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v8 01/16] clk: generalize devm_clk_get() a bit
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v8 11/16] watchdog: Make use of devm_clk_get_enabled()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/4] dt-bindings: watchdog: Add compatible for Mediatek MT8186
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• Re: [PATCH v4 2/4] dt-bindings: watchdog: Add compatible for Mediatek MT8186
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/4] dt-bindings: timer: Add compatible for Mediatek MT8186
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 3/4] dt-bindings: arm: Add compatible for Mediatek MT8186
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v4 4/4] arm64: dts: Add Mediatek SoC MT8186 dts and evaluation board and Makefile
  • From: Allen-KH Cheng <allen-kh.cheng@xxxxxxxxxxxx>
• [PATCH v4 1/4] dt-bindings: timer: Add compatible for Mediatek MT8186
  • From: Allen-KH Cheng <allen-kh.cheng@xxxxxxxxxxxx>
• [PATCH v4 0/4] Add basic node support for Mediatek MT8186 SoC
  • From: Allen-KH Cheng <allen-kh.cheng@xxxxxxxxxxxx>
• [PATCH v4 3/4] dt-bindings: arm: Add compatible for Mediatek MT8186
  • From: Allen-KH Cheng <allen-kh.cheng@xxxxxxxxxxxx>
• [PATCH v4 2/4] dt-bindings: watchdog: Add compatible for Mediatek MT8186
  • From: Allen-KH Cheng <allen-kh.cheng@xxxxxxxxxxxx>
• Re: [PATCH v3 06/10] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v3 00/10] ARM: Introduce HPE GXP Architecture
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v3 06/10] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: nick.hawkins@xxxxxxx
• [PATCH v3 03/10] drivers: wdt: Introduce HPE GXP SoC Watchdog
  • From: nick.hawkins@xxxxxxx
• [PATCH v3 00/10] ARM: Introduce HPE GXP Architecture
  • From: nick.hawkins@xxxxxxx
• Re: [RESEND V2 0/3] Add watchdog support for MT8186 SoC
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• Re: [RESEND V2 0/3] Add watchdog support for MT8186 SoC
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• RE: [PATCH v5 0/7] RZG2L_WDT Fixes and Improvements
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH 01/14] dt-bindings: watchdog: sunxi: fix F1C100s compatible
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• Re: [PATCH v5 0/7] RZG2L_WDT Fixes and Improvements
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 02/14] ARM: dts: suniv: F1C100: fix watchdog compatible
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 01/14] dt-bindings: watchdog: sunxi: fix F1C100s compatible
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: watchdog: convert faraday,ftwdt010 to yaml
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: reset: mt7986: Add reset-controller header file
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: watchdog: renesas,wdt: Document RZ/V2L SoC
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 4/7] watchdog: rzg2l_wdt: Fix reset control imbalance
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 5/7] watchdog: rzg2l_wdt: Add error check for reset_control_deassert
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 2/2] watchdog: Add watchdog driver for Sunplus SP7021
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 5/5] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] simatic-ipc: convert to use common P2SB accessor
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH 0/2] simatic-ipc additions to p2sb apl lake gpio
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH 1/2] simatic-ipc: convert to use common P2SB accessor
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH 2/2] leds: simatic-ipc-leds-gpio: add GPIO version of Siemens driver
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH 01/14] dt-bindings: watchdog: sunxi: fix F1C100s compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• [GIT PULL] Immutable branch between MFD, RTC and Watchdog due for the v5.18 merge window
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 02/14] ARM: dts: suniv: F1C100: fix watchdog compatible
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• [PATCH 01/14] dt-bindings: watchdog: sunxi: fix F1C100s compatible
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• RE: [PATCH v5 0/7] RZG2L_WDT Fixes and Improvements
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] clk: add devm_clk_prepare_enable() helper
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• iTCO_wdt on Intel NUC11TNBi5
  • From: Kévin L'hôpital <kevin.lhopital@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v7 1/2] dt-bindings: watchdog: Add watchdog yaml file for Sunplus SP7021
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• [PATCH v7 2/2] watchdog: Add watchdog driver for Sunplus SP7021
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• [PATCH v7 0/2] Add watchdog driver for Sunplus SP7021 SoC
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: watchdog: renesas,wdt: Document RZ/V2L SoC
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] dt-bindings: watchdog: renesas,wdt: Document RZ/V2L SoC
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• Re: [PATCH v5 5/7] watchdog: rzg2l_wdt: Add error check for reset_control_deassert
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v5 4/7] watchdog: rzg2l_wdt: Fix reset control imbalance
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas,wdt: Document RZ/V2L SoC
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH] MIPS: Remove TX39XX support
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [RESEND V2 3/3] watchdog: mediatek: mt8186: add wdt support
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• [RESEND V2 2/3] dt-bindings: reset: mt8186: add reset-controller header file
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• [RESEND V2 0/3] Add watchdog support for MT8186 SoC
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• [RESEND V2 1/3] dt-bindings: watchdog: Add compatible for MediaTek MT8186
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: watchdog: Add compatible for MediaTek MT8186
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• [PATCH V2 0/3] Add watchdog support for MT8186 SoC
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• [PATCH 3/3] watchdog: mediatek: mt8186: add wdt support
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• [PATCH 2/3] dt-bindings: reset: mt8186: add reset-controller header file
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• Re: [2/4] dt-bindings: reset: mt8186: add toprgu reset-controller header file
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• Re: [3/4] dt-bindings: reset: mt8186: add DSI reset bit for MMSYS
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• RE: [PATCH v5 5/7] watchdog: rzg2l_wdt: Add error check for reset_control_deassert
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas,wdt: Document RZ/V2L SoC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas,wdt: Document RZ/V2L SoC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/7] dt-bindings: timer: Add compatible for Mediatek MT8186
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• RE: [PATCH v6 2/2] watchdog: Add watchdog driver for Sunplus SP7021
  • From: xt.hu[胡先韬] <xt.hu@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas,wdt: Document RZ/V2L SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: renesas,wdt: Document RZ/V2L SoC
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• Re: [PATCH v5 5/7] watchdog: rzg2l_wdt: Add error check for reset_control_deassert
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
• Re: [PATCH v5 6/7] watchdog: rzg2l_wdt: Use force reset for WDT reset
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 7/7] watchdog: rzg2l_wdt: Add set_timeout callback
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 3/7] watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait context'
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 2/7] watchdog: rzg2l_wdt: Fix Runtime PM usage
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v5 7/7] watchdog: rzg2l_wdt: Add set_timeout callback
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 6/7] watchdog: rzg2l_wdt: Use force reset for WDT reset
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 5/7] watchdog: rzg2l_wdt: Add error check for reset_control_deassert
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 4/7] watchdog: rzg2l_wdt: Fix reset control imbalance
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 3/7] watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait context'
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 2/7] watchdog: rzg2l_wdt: Fix Runtime PM usage
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 1/7] watchdog: rzg2l_wdt: Fix 32bit overflow issue
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 0/7] RZG2L_WDT Fixes and Improvements
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] watchdog: Add watchdog driver for Sunplus SP7021
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [2/4] dt-bindings: reset: mt8186: add toprgu reset-controller header file
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: watchdog: Add compatible for MediaTek MT8186
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [4/4] watchdog: mediatek: mt8186: add wdt support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: imx7ulp-wdt: Add imx93 compatible string
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [3/4] dt-bindings: reset: mt8186: add DSI reset bit for MMSYS
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [2/4] dt-bindings: reset: mt8186: add toprgu reset-controller header file
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: watchdog: Add compatible for MediaTek MT8186
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: imx7ulp-wdt: Add imx93 compatible string
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: [PATCH v4 4/6] watchdog: rzg2l_wdt: Add error check for reset_control_deassert
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v4 5/6] watchdog: rzg2l_wdt: Use force reset for WDT reset
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH v4 5/6] watchdog: rzg2l_wdt: Use force reset for WDT reset
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v4 3/6] watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait context'
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4 6/6] watchdog: rzg2l_wdt: Add set_timeout callback
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4 5/6] watchdog: rzg2l_wdt: Use force reset for WDT reset
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4 4/6] watchdog: rzg2l_wdt: Add error check for reset_control_deassert
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/6] watchdog: rzg2l_wdt: Fix Runtime PM usage
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v6 1/2] watchdog: Add Sunplus SP7021 WDT devicetree bindings documentation
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• [PATCH v5 0/2] Add watchdog driver for Sunplus SP7021 SoC
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• [PATCH v6 2/2] watchdog: Add watchdog driver for Sunplus SP7021
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• [PATCH v6 2/8] rtc: max77686: rename day-of-month defines
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v6 3/8] rtc: max77686: remove unused code to read in 12-hour mode
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v6 7/8] watchdog: max77620: add comment to clarify set_timeout procedure
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v6 1/8] rtc: max77686: convert comments to kernel-doc format
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v6 0/8] Add MAX77714 PMIC minimal driver (RTC and watchdog only)
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v6 8/8] rtc: max77686: add MAX77714 support
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v6 6/8] watchdog: max77620: add support for the max77714 variant
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v6 5/8] mfd: max77714: Add driver for Maxim MAX77714 PMIC
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v6 4/8] dt-bindings: mfd: add Maxim MAX77714 PMIC
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v4 6/6] watchdog: rzg2l_wdt: Add set_timeout callback
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v4 5/6] watchdog: rzg2l_wdt: Use force reset for WDT reset
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v4 4/6] watchdog: rzg2l_wdt: Add error check for reset_control_deassert
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v4 3/6] watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait context'
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v4 2/6] watchdog: rzg2l_wdt: Fix Runtime PM usage
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v4 1/6] watchdog: rzg2l_wdt: Fix 32bit overflow issue
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v4 0/6] RZG2L_WDT Fixes and Improvements
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Remove TX39XX support
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Remove TX39XX support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Remove TX39XX support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3 0/5] ARM: r9a06g032: add support for the watchdogs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCHv4 3/4] watchdog: rti-wdt: attach to running watchdog during probe
  • From: Hari Nagalla <hnagalla@xxxxxx>
• [PATCH v3 2/5] dt-bindings: watchdog: renesas,wdt: Add support for RZ/N1
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] clk: renesas: r9a06g032: Disable the watchdog reset sources when halting
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCHv4 3/4] watchdog: rti-wdt: attach to running watchdog during probe
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCHv4 3/4] watchdog: rti-wdt: attach to running watchdog during probe
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCHv4 3/4] watchdog: rti-wdt: attach to running watchdog during probe
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• [PATCH v3 5/5] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>