Linux Watchdog

• Thread Index

• Re: [PATCH] dt-bindings: watchdog: renesas,wdt: Document RZ/G2UL SoC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] watchdog: wdat_wdg: Stop watchdog when uninstalling module
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v2 1/3] watchdog: wdat_wdg: Using the existed function to check parameter timeout
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v2 2/3] watchdog: wdat_wdg: Stop watchdog when rebooting the system
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH v2 0/3] Impovements about acpi hardware watchdog
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: uniphier: Use unevaluatedProperties
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas,wdt: Document RZ/G2UL SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: renesas,wdt: Document RZ/G2UL SoC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v5 06/11] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: clock: Add Nuvoton WPCM450 clock/reset controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/3] watchdog: wdat_wdg: Checking the module parameter timeout
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH 3/3] watchdog: wdat_wdg: Add stop watchdog after unregister
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH 2/3] watchdog: wdat_wdg: Fix the bug stucked after executing reboot
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• [PATCH 2/7] clocksource: timer-npcm7xx: Enable timer 1 clock before use
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH 0/7] Nuvoton WPCM450 clock and reset driver
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH 3/7] watchdog: npcm: Enable clock if provided
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH 5/7] ARM: dts: wpcm450: Add clock controller node
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH 4/7] dt-bindings: clock: Add Nuvoton WPCM450 clock/reset controller
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH 7/7] ARM: dts: wpcm450: Switch clocks to clock controller
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH 1/7] dt-bindings: timer: nuvoton,npcm7xx-timer: Allow specifying all clocks
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH 6/7] clk: wpcm450: Add Nuvoton WPCM450 clock/reset controller driver
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• Re: [PATCH 3/7] watchdog: npcm: Enable clock if provided
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 3/3] ARM: dts: imx6: phyFLEX: disable da9063 watchdog during suspend
  • From: Primoz Fiser <primoz.fiser@xxxxxxxxx>
• [PATCH 1/3] dt-bindings: mfd: da9063: watchdog: add suspend disable option
  • From: Primoz Fiser <primoz.fiser@xxxxxxxxx>
• [PATCH 2/3] watchdog: da9063: optionally disable watchdog during suspend
  • From: Primoz Fiser <primoz.fiser@xxxxxxxxx>
• Re: [PATCH] Watchdog: Checking timeout invalid if hardware heartbeat range is configured
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] Watchdog: Checking timeout invalid if hardware heartbeat range is configured
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v5 06/11] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: nick.hawkins@xxxxxxx
• [PATCH v5 03/11] drivers: wdt: Introduce HPE GXP SoC Watchdog
  • From: nick.hawkins@xxxxxxx
• [PATCH v5 00/11] Introduce HPE GXP Architecture
  • From: nick.hawkins@xxxxxxx
• [PATCH] Watchdog: Checking timeout invalid if hardware heartbeat range is configured
  • From: Liu Xinpeng <liuxp11@xxxxxxxxxxxxxxx>
• RE: [PATCH v4 06/11] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: "Hawkins, Nick" <nick.hawkins@xxxxxxx>
• RE: [PATCH v4 03/11] drivers: wdt: Introduce HPE GXP SoC Watchdog
  • From: "Hawkins, Nick" <nick.hawkins@xxxxxxx>
• Re: [PATCH v4 06/11] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH v4 06/11] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: "Hawkins, Nick" <nick.hawkins@xxxxxxx>
• Re: [PATCH v4 06/11] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 03/11] drivers: wdt: Introduce HPE GXP SoC Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v4 00/11] ARM: Introduce HPE GXP Architecture
  • From: nick.hawkins@xxxxxxx
• [PATCH v4 06/11] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: nick.hawkins@xxxxxxx
• [PATCH v4 03/11] drivers: wdt: Introduce HPE GXP SoC Watchdog
  • From: nick.hawkins@xxxxxxx
• Re: [PATCH 09/48] watchdog: sa1100: use platform device registration
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 09/48] watchdog: sa1100: use platform device registration
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 05/48] ARM: pxa: split up mach/hardware.h
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [RFC v1 0/2] Add driver for PAPR watchdog timers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC v1 0/2] Add driver for PAPR watchdog timers
  • From: Alexey Kardashevskiy <aik@xxxxxxxxx>
• Re: [RFC v1 0/2] Add driver for PAPR watchdog timers
  • From: Nathan Lynch <nathanl@xxxxxxxxxxxxx>
• [PATCH v2 1/1] watchdog: sp805: disable watchdog on remove
  • From: Eliav Farber <farbere@xxxxxxxxxx>
• [PATCH v2 0/1] Use watchdog_stop_on_unregister() to stop sp805 watchdog when unregistering it
  • From: Eliav Farber <farbere@xxxxxxxxxx>
• Re: [UNVERIFIED SENDER] Re: [PATCH] watchdog: sp805: disable watchdog on remove
  • From: "Farber, Eliav" <farbere@xxxxxxxxxx>
• Re: [RFC v1 2/2] watchdog: pseries-wdt: initial support for PAPR virtual watchdog timers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC v1 2/2] watchdog: pseries-wdt: initial support for PAPR virtual watchdog timers
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [RFC v1 0/2] Add driver for PAPR watchdog timers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: uniphier: Use unevaluatedProperties
  • From: Rob Herring <robh@xxxxxxxxxx>
• [RFC v1 2/2] watchdog: pseries-wdt: initial support for PAPR virtual watchdog timers
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [RFC v1 1/2] powerpc/pseries: hvcall.h: add definitions for H_WATCHDOG hypercall
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [RFC v1 0/2] Add driver for PAPR watchdog timers
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [RFC v1 0/2] Add driver for PAPR watchdog timers
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [RFC v1] Add driver for PAPR virtual watchdog timers
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [no subject]
  • From: Scott Cheloha <cheloha@xxxxxxxxxxxxx>
• [PATCH v6 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: watchdog: renesas,wdt: Add support for RZ/N1
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v6 0/2] ARM: r9a06g032: add support for the watchdogs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: rti-wdt: Fix pm_runtime_get_sync() error checking
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: rti-wdt: Fix pm_runtime_get_sync() error checking
  • From: Miaoqian Lin <linmq006@xxxxxxxxx>
• RE: [PATCH v5 1/5] mfd: da9062: make register CONFIG_I writable
  • From: Christoph Niedermaier <cniedermaier@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: Add SC8180X and SC8280XP compatibles
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: Add SC8180X and SC8280XP compatibles
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v5 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: watchdog: renesas,wdt: Add support for RZ/N1
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v5 0/2] ARM: r9a06g032: add support for the watchdogs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: Add a mechanism to detect stalls on guest vCPUs
  • From: Sebastian Ene <sebastianene@xxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: uniphier: Use unevaluatedProperties
  • From: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: Add a mechanism to detect stalls on guest vCPUs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: watchdog: Add qemu,vm-watchdog compatible
  • From: Sebastian Ene <sebastianene@xxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: Add a mechanism to detect stalls on guest vCPUs
  • From: Sebastian Ene <sebastianene@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: watchdog: Add qemu,vm-watchdog compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 0/2] Detect stalls on guest vCPUS
  • From: Sebastian Ene <sebastianene@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: watchdog: Add qemu,vm-watchdog compatible
  • From: Sebastian Ene <sebastianene@xxxxxxxxxx>
• [PATCH 2/2] watchdog: Add a mechanism to detect stalls on guest vCPUs
  • From: Sebastian Ene <sebastianene@xxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: Add a mechanism to detect stalls on guest vCPUs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH v3 03/10] drivers: wdt: Introduce HPE GXP SoC Watchdog
  • From: "Hawkins, Nick" <nick.hawkins@xxxxxxx>
• Re: [PATCH v3 03/10] drivers: wdt: Introduce HPE GXP SoC Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 03/10] drivers: wdt: Introduce HPE GXP SoC Watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 02/12] dt-bindings: watchdog: sunxi: clarify clock support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: sp805: add support for irq
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: sp805: disable watchdog on remove
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: sp805: add support for irq
  • From: Eliav Farber <farbere@xxxxxxxxxx>
• [PATCH] watchdog: sp805: disable watchdog on remove
  • From: Eliav Farber <farbere@xxxxxxxxxx>
• Re: [PATCH v4 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH v5] watchdog: imx2_wdg: Allow ping on suspend
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [GIT PULL REQUEST] watchdog - v5.18 Merge window
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [GIT PULL REQUEST] watchdog - v5.18 Merge window
  • From: Rafał Miłecki <rafal@xxxxxxxxxx>
• [GIT PULL REQUEST] watchdog - v5.18 Merge window
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [PATCH v4 1/4] dt-bindings: timer: Add compatible for Mediatek MT8186
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: watchdog: renesas,wdt: Add support for RZ/N1
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v4 0/2] ARM: r9a06g032: add support for the watchdogs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v4 2/2] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v5] watchdog: imx2_wdg: Allow ping on suspend
  • From: Alistair Francis <alistair@xxxxxxxxxxxxx>
• Re: linux resetting when the usb storage was removed while copying
  • From: qianfan <qianfanguijin@xxxxxxx>
• Re: [PATCH v4 4/4] arm64: dts: Add Mediatek SoC MT8186 dts and evaluation board and Makefile
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: linux resetting when the usb storage was removed while copying
  • From: OGAWA Hirofumi <hirofumi@xxxxxxxxxxxxxxxxxx>
• Re: linux resetting when the usb storage was removed while copying
  • From: qianfan <qianfanguijin@xxxxxxx>
• Re: [PATCH v4] watchdog: imx2_wdg: Allow ping on suspend
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: linux resetting when the usb storage was removed while copying
  • From: OGAWA Hirofumi <hirofumi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/12] dt-bindings: watchdog: sunxi: clarify clock support
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• Re: [PATCH v2 01/12] dt-bindings: watchdog: sunxi: fix F1C100s compatible
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• Re: [PATCH v2 02/12] dt-bindings: watchdog: sunxi: clarify clock support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: iTCO_wdt on Intel NUC11TNBi5
  • From: Kévin L'hôpital <kevin.lhopital@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 1/2] dt-bindings: watchdog: Add watchdog yaml file for Sunplus SP7021
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v8 2/2] watchdog: Add watchdog driver for Sunplus SP7021
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• [PATCH v8 0/2] Add watchdog driver for Sunplus SP7021 SoC
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• [PATCH v8 1/2] dt-bindings: watchdog: Add watchdog yaml file for Sunplus SP7021
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• Re: [PATCH v4] watchdog: imx2_wdg: Allow ping on suspend
  • From: Alistair <alistair@xxxxxxxxxxxxx>
• Re: [PATCH v4] watchdog: imx2_wdg: Allow ping on suspend
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v4] watchdog: imx2_wdg: Allow ping on suspend
  • From: Alistair Francis <alistair@xxxxxxxxxxxxx>
• Re: [PATCH] watchdog: gpio_wdt: Support GPO lines with the toggle algorithm
  • From: Tobias Waldekranz <tobias@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: gpio_wdt: Support GPO lines with the toggle algorithm
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: gpio_wdt: Support GPO lines with the toggle algorithm
  • From: Tobias Waldekranz <tobias@xxxxxxxxxxxxxx>
• Re: [PATCH] drivers: watchdog: omap_wdt: ensure working trigger pattern
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] drivers: watchdog: omap_wdt: ensure working trigger pattern
  • From: Sondhauß, Jan <Jan.Sondhauss@xxxxxxxx>
• Re: [PATCH] drivers: watchdog: omap_wdt: ensure working trigger pattern
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: linux resetting when the usb storage was removed while copying
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] drivers: watchdog: omap_wdt: ensure working trigger pattern
  • From: Sondhauß, Jan <Jan.Sondhauss@xxxxxxxx>
• Re: linux resetting when the usb storage was removed while copying
  • From: qianfan <qianfanguijin@xxxxxxx>
• Re: linux resetting when the usb storage was removed while copying
  • From: OGAWA Hirofumi <hirofumi@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH v7 1/2] dt-bindings: watchdog: Add watchdog yaml file for Sunplus SP7021
  • From: xt.hu[胡先韬] <xt.hu@xxxxxxxxxxx>
• Re: [PATCH v7 1/2] dt-bindings: watchdog: Add watchdog yaml file for Sunplus SP7021
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v8 02/16] clk: Provide new devm_clk helpers for prepared and enabled clocks
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: dev_WARN_ONCE cause gpio-watchdog reset
  • From: qianfan <qianfanguijin@xxxxxxx>
• Re: [PATCH v2 01/12] dt-bindings: watchdog: sunxi: fix F1C100s compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 02/16] clk: Provide new devm_clk helpers for prepared and enabled clocks
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: dev_WARN_ONCE cause gpio-watchdog reset
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: dev_WARN_ONCE cause gpio-watchdog reset
  • From: qianfan <qianfanguijin@xxxxxxx>
• RE: dev_WARN_ONCE cause gpio-watchdog reset
  • From: "Schmid, Carsten" <Carsten_Schmid@xxxxxxxxxx>
• Re: dev_WARN_ONCE cause gpio-watchdog reset
  • From: qianfan <qianfanguijin@xxxxxxx>
• dev_WARN_ONCE cause gpio-watchdog reset
  • From: qianfan <qianfanguijin@xxxxxxx>
• [PATCH v2 03/12] ARM: dts: suniv: F1C100: fix watchdog compatible
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• [PATCH v2 02/12] dt-bindings: watchdog: sunxi: clarify clock support
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• [PATCH v2 01/12] dt-bindings: watchdog: sunxi: fix F1C100s compatible
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• Re: [PATCH v8 11/16] watchdog: Make use of devm_clk_get_enabled()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v8 00/16] clk: provide new devm helpers for prepared and enabled clocks
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 01/14] dt-bindings: watchdog: sunxi: fix F1C100s compatible
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• [PATCH v8 00/16] clk: provide new devm helpers for prepared and enabled clocks
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v8 02/16] clk: Provide new devm_clk helpers for prepared and enabled clocks
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v8 01/16] clk: generalize devm_clk_get() a bit
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v8 11/16] watchdog: Make use of devm_clk_get_enabled()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/4] dt-bindings: watchdog: Add compatible for Mediatek MT8186
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• Re: [PATCH v4 2/4] dt-bindings: watchdog: Add compatible for Mediatek MT8186
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/4] dt-bindings: timer: Add compatible for Mediatek MT8186
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 3/4] dt-bindings: arm: Add compatible for Mediatek MT8186
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v4 4/4] arm64: dts: Add Mediatek SoC MT8186 dts and evaluation board and Makefile
  • From: Allen-KH Cheng <allen-kh.cheng@xxxxxxxxxxxx>
• [PATCH v4 1/4] dt-bindings: timer: Add compatible for Mediatek MT8186
  • From: Allen-KH Cheng <allen-kh.cheng@xxxxxxxxxxxx>
• [PATCH v4 0/4] Add basic node support for Mediatek MT8186 SoC
  • From: Allen-KH Cheng <allen-kh.cheng@xxxxxxxxxxxx>
• [PATCH v4 3/4] dt-bindings: arm: Add compatible for Mediatek MT8186
  • From: Allen-KH Cheng <allen-kh.cheng@xxxxxxxxxxxx>
• [PATCH v4 2/4] dt-bindings: watchdog: Add compatible for Mediatek MT8186
  • From: Allen-KH Cheng <allen-kh.cheng@xxxxxxxxxxxx>
• Re: [PATCH v3 06/10] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v3 00/10] ARM: Introduce HPE GXP Architecture
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v3 06/10] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: nick.hawkins@xxxxxxx
• [PATCH v3 03/10] drivers: wdt: Introduce HPE GXP SoC Watchdog
  • From: nick.hawkins@xxxxxxx
• [PATCH v3 00/10] ARM: Introduce HPE GXP Architecture
  • From: nick.hawkins@xxxxxxx
• Re: [RESEND V2 0/3] Add watchdog support for MT8186 SoC
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• Re: [RESEND V2 0/3] Add watchdog support for MT8186 SoC
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• RE: [PATCH v5 0/7] RZG2L_WDT Fixes and Improvements
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH 01/14] dt-bindings: watchdog: sunxi: fix F1C100s compatible
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• Re: [PATCH v5 0/7] RZG2L_WDT Fixes and Improvements
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 02/14] ARM: dts: suniv: F1C100: fix watchdog compatible
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 01/14] dt-bindings: watchdog: sunxi: fix F1C100s compatible
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: watchdog: convert faraday,ftwdt010 to yaml
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: reset: mt7986: Add reset-controller header file
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: watchdog: renesas,wdt: Document RZ/V2L SoC
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 4/7] watchdog: rzg2l_wdt: Fix reset control imbalance
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 5/7] watchdog: rzg2l_wdt: Add error check for reset_control_deassert
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 2/2] watchdog: Add watchdog driver for Sunplus SP7021
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 5/5] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] simatic-ipc: convert to use common P2SB accessor
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH 0/2] simatic-ipc additions to p2sb apl lake gpio
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH 1/2] simatic-ipc: convert to use common P2SB accessor
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH 2/2] leds: simatic-ipc-leds-gpio: add GPIO version of Siemens driver
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH 01/14] dt-bindings: watchdog: sunxi: fix F1C100s compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• [GIT PULL] Immutable branch between MFD, RTC and Watchdog due for the v5.18 merge window
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 02/14] ARM: dts: suniv: F1C100: fix watchdog compatible
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• [PATCH 01/14] dt-bindings: watchdog: sunxi: fix F1C100s compatible
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• RE: [PATCH v5 0/7] RZG2L_WDT Fixes and Improvements
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] clk: add devm_clk_prepare_enable() helper
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• iTCO_wdt on Intel NUC11TNBi5
  • From: Kévin L'hôpital <kevin.lhopital@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v7 1/2] dt-bindings: watchdog: Add watchdog yaml file for Sunplus SP7021
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• [PATCH v7 2/2] watchdog: Add watchdog driver for Sunplus SP7021
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• [PATCH v7 0/2] Add watchdog driver for Sunplus SP7021 SoC
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: watchdog: renesas,wdt: Document RZ/V2L SoC
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] dt-bindings: watchdog: renesas,wdt: Document RZ/V2L SoC
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• Re: [PATCH v5 5/7] watchdog: rzg2l_wdt: Add error check for reset_control_deassert
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v5 4/7] watchdog: rzg2l_wdt: Fix reset control imbalance
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas,wdt: Document RZ/V2L SoC
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH] MIPS: Remove TX39XX support
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [RESEND V2 3/3] watchdog: mediatek: mt8186: add wdt support
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• [RESEND V2 2/3] dt-bindings: reset: mt8186: add reset-controller header file
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• [RESEND V2 0/3] Add watchdog support for MT8186 SoC
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• [RESEND V2 1/3] dt-bindings: watchdog: Add compatible for MediaTek MT8186
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: watchdog: Add compatible for MediaTek MT8186
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• [PATCH V2 0/3] Add watchdog support for MT8186 SoC
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• [PATCH 3/3] watchdog: mediatek: mt8186: add wdt support
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• [PATCH 2/3] dt-bindings: reset: mt8186: add reset-controller header file
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• Re: [2/4] dt-bindings: reset: mt8186: add toprgu reset-controller header file
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• Re: [3/4] dt-bindings: reset: mt8186: add DSI reset bit for MMSYS
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• RE: [PATCH v5 5/7] watchdog: rzg2l_wdt: Add error check for reset_control_deassert
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas,wdt: Document RZ/V2L SoC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas,wdt: Document RZ/V2L SoC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/7] dt-bindings: timer: Add compatible for Mediatek MT8186
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• RE: [PATCH v6 2/2] watchdog: Add watchdog driver for Sunplus SP7021
  • From: xt.hu[胡先韬] <xt.hu@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: renesas,wdt: Document RZ/V2L SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: renesas,wdt: Document RZ/V2L SoC
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• Re: [PATCH v5 5/7] watchdog: rzg2l_wdt: Add error check for reset_control_deassert
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
• Re: [PATCH v5 6/7] watchdog: rzg2l_wdt: Use force reset for WDT reset
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 7/7] watchdog: rzg2l_wdt: Add set_timeout callback
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 3/7] watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait context'
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 2/7] watchdog: rzg2l_wdt: Fix Runtime PM usage
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v5 7/7] watchdog: rzg2l_wdt: Add set_timeout callback
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 6/7] watchdog: rzg2l_wdt: Use force reset for WDT reset
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 5/7] watchdog: rzg2l_wdt: Add error check for reset_control_deassert
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 4/7] watchdog: rzg2l_wdt: Fix reset control imbalance
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 3/7] watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait context'
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 2/7] watchdog: rzg2l_wdt: Fix Runtime PM usage
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 1/7] watchdog: rzg2l_wdt: Fix 32bit overflow issue
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 0/7] RZG2L_WDT Fixes and Improvements
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] watchdog: Add watchdog driver for Sunplus SP7021
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [2/4] dt-bindings: reset: mt8186: add toprgu reset-controller header file
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: watchdog: Add compatible for MediaTek MT8186
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [4/4] watchdog: mediatek: mt8186: add wdt support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: imx7ulp-wdt: Add imx93 compatible string
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [3/4] dt-bindings: reset: mt8186: add DSI reset bit for MMSYS
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [2/4] dt-bindings: reset: mt8186: add toprgu reset-controller header file
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: watchdog: Add compatible for MediaTek MT8186
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: imx7ulp-wdt: Add imx93 compatible string
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: [PATCH v4 4/6] watchdog: rzg2l_wdt: Add error check for reset_control_deassert
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v4 5/6] watchdog: rzg2l_wdt: Use force reset for WDT reset
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH v4 5/6] watchdog: rzg2l_wdt: Use force reset for WDT reset
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v4 3/6] watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait context'
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4 6/6] watchdog: rzg2l_wdt: Add set_timeout callback
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4 5/6] watchdog: rzg2l_wdt: Use force reset for WDT reset
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4 4/6] watchdog: rzg2l_wdt: Add error check for reset_control_deassert
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/6] watchdog: rzg2l_wdt: Fix Runtime PM usage
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v6 1/2] watchdog: Add Sunplus SP7021 WDT devicetree bindings documentation
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• [PATCH v5 0/2] Add watchdog driver for Sunplus SP7021 SoC
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• [PATCH v6 2/2] watchdog: Add watchdog driver for Sunplus SP7021
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• [PATCH v6 2/8] rtc: max77686: rename day-of-month defines
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v6 3/8] rtc: max77686: remove unused code to read in 12-hour mode
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v6 7/8] watchdog: max77620: add comment to clarify set_timeout procedure
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v6 1/8] rtc: max77686: convert comments to kernel-doc format
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v6 0/8] Add MAX77714 PMIC minimal driver (RTC and watchdog only)
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v6 8/8] rtc: max77686: add MAX77714 support
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v6 6/8] watchdog: max77620: add support for the max77714 variant
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v6 5/8] mfd: max77714: Add driver for Maxim MAX77714 PMIC
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v6 4/8] dt-bindings: mfd: add Maxim MAX77714 PMIC
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v4 6/6] watchdog: rzg2l_wdt: Add set_timeout callback
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v4 5/6] watchdog: rzg2l_wdt: Use force reset for WDT reset
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v4 4/6] watchdog: rzg2l_wdt: Add error check for reset_control_deassert
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v4 3/6] watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait context'
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v4 2/6] watchdog: rzg2l_wdt: Fix Runtime PM usage
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v4 1/6] watchdog: rzg2l_wdt: Fix 32bit overflow issue
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v4 0/6] RZG2L_WDT Fixes and Improvements
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Remove TX39XX support
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Remove TX39XX support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Remove TX39XX support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3 0/5] ARM: r9a06g032: add support for the watchdogs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCHv4 3/4] watchdog: rti-wdt: attach to running watchdog during probe
  • From: Hari Nagalla <hnagalla@xxxxxx>
• [PATCH v3 2/5] dt-bindings: watchdog: renesas,wdt: Add support for RZ/N1
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] clk: renesas: r9a06g032: Disable the watchdog reset sources when halting
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCHv4 3/4] watchdog: rti-wdt: attach to running watchdog during probe
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCHv4 3/4] watchdog: rti-wdt: attach to running watchdog during probe
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCHv4 3/4] watchdog: rti-wdt: attach to running watchdog during probe
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• [PATCH v3 5/5] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH] watchdog: rti_wdt: Fix calculation and evaluation of preset heartbeat
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCHv4 3/4] watchdog: rti-wdt: attach to running watchdog during probe
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCHv4 3/4] watchdog: rti-wdt: attach to running watchdog during probe
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: watchdog: convert faraday,ftwdt010 to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] [v1] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH] watchdog: bcm7038_wdt: Support BCM6345 compatible string
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: bcm7038_wdt: Support BCM6345 compatible string
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH] watchdog: bcm7038_wdt: Support BCM6345 compatible string
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [0/4] Add watchdog support for MT8186 SoC
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• [4/4] watchdog: mediatek: mt8186: add wdt support
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: watchdog: Add compatible for MediaTek MT8186
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• [2/4] dt-bindings: reset: mt8186: add toprgu reset-controller header file
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• [3/4] dt-bindings: reset: mt8186: add DSI reset bit for MMSYS
  • From: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
• [PATCH] [v1] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
  • From: nick.hawkins@xxxxxxx
• RE: [RFC PATCH] watchdog: da9062: Correct the timeout values [Klartext]
  • From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
• Re: [PATCH v5 3/9] i2c: piix4: Move port I/O region request/release code into functions
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 3/9] i2c: piix4: Move port I/O region request/release code into functions
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH] dt-bindings: watchdog: imx7ulp-wdt: Add imx93 compatible string
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• RE: [RFC PATCH] watchdog: da9062: Correct the timeout values [Klartext]
  • From: Christoph Niedermaier <cniedermaier@xxxxxxxxxxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH 1/2] ARM: dts: armada-xp: add interrupts for watchdog
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: orion_wdt: support pretimeout on Armada-XP
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 4/5] arm64: dts: renesas: r8a779f0: Add RWDT node
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: renesas: spider-cpu: Enable watchdog timer
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/5] clk: renesas: r8a779f0: Add WDT clock
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/5] watchdog: renesas_wdt: Add R-Car Gen4 support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: watchdog: renesas-wdt: Document r8a779f0 support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: orion_wdt: support pretimeout on Armada-XP
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: armada-xp: add interrupts for watchdog
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [PATCH v2 6/6] clk: renesas: r9a06g032: Disable the watchdog reset sources when halting
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 6/6] clk: renesas: r9a06g032: Disable the watchdog reset sources when halting
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH V2] watchdog: Improve watchdog_dev function documentation
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/1] watchdog: aspeed: add nowayout support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/1] watchdog: aspeed: add nowayout support
  • From: Eduardo Valentin <eduval@xxxxxxxxxx>
• Re: [PATCH v5 3/9] i2c: piix4: Move port I/O region request/release code into functions
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH V2] watchdog: Improve watchdog_dev function documentation
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: watchdog: renesas,wdt: Add support for RZ/N1
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 3/9] i2c: piix4: Move port I/O region request/release code into functions
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v5 3/9] i2c: piix4: Move port I/O region request/release code into functions
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH V2] watchdog: Improve watchdog_dev function documentation
  • From: Daniel Bristot de Oliveira <bristot@xxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: watchdog: convert faraday,ftwdt010 to yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v5 0/9] i2c: piix4: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v4] dt-bindings: watchdog: convert faraday,ftwdt010 to yaml
  • From: Corentin Labbe <clabbe@xxxxxxxxxxxx>
• Re: [PATCH v5 3/9] i2c: piix4: Move port I/O region request/release code into functions
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 2/2] watchdog: orion_wdt: support pretimeout on Armada-XP
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] watchdog: Pretimeout support for Armada-XP
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: dts: armada-xp: add interrupts for watchdog
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: watchdog: convert faraday,ftwdt010 to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PULL REQUEST] immutable branch "i2c/add-request_mem_region_muxed-20220210"
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 0/9] i2c: piix4: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: watchdog: convert faraday,ftwdt010 to yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH v3] dt-bindings: watchdog: convert faraday,ftwdt010 to yaml
  • From: Corentin Labbe <clabbe@xxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: watchdog: convert faraday,ftwdt010 to yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH v2] dt-bindings: watchdog: convert faraday,ftwdt010 to yaml
  • From: Corentin Labbe <clabbe@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: convert faraday,ftwdt010 to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] watchdog: allow building BCM7038_WDT for BCM4908
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: allow building BCM7038_WDT for BCM4908
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH] watchdog: allow building BCM7038_WDT for BCM4908
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH V2] dt-bindings: watchdog: brcm,bcm7038: add more compatible strings
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH V2] dt-bindings: watchdog: brcm,bcm7038: add more compatible strings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V2] dt-bindings: watchdog: brcm,bcm7038: add more compatible strings
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH V2] dt-bindings: watchdog: brcm,bcm7038: add more compatible strings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 5/6] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v5 9/9] i2c: piix4: Enable EFCH MMIO for Family 17h+
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v5 8/9] i2c: piix4: Add EFCH MMIO support for SMBus port select
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v5 7/9] i2c: piix4: Add EFCH MMIO support to SMBus base address detect
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v5 6/9] i2c: piix4: Add EFCH MMIO support to region request and release
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v5 5/9] i2c: piix4: Move SMBus port selection into function
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v5 4/9] i2c: piix4: Move SMBus controller base address detect into function
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v5 3/9] i2c: piix4: Move port I/O region request/release code into functions
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v5 2/9] i2c: piix4: Replace hardcoded memory map size with a #define
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v5 1/9] kernel/resource: Introduce request_mem_region_muxed()
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v5 0/9] i2c: piix4: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• Re: [PATCH] watchdog: Improve watchdog_dev function documentation
  • From: Daniel Bristot de Oliveira <bristot@xxxxxxxxxx>
• Re: [PATCH] watchdog: Improve watchdog_dev function documentation
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH] watchdog: Improve watchdog_dev function documentation
  • From: Daniel Bristot de Oliveira <bristot@xxxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: watchdog: renesas,wdt: Add support for RZ/N1
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/6] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4 0/9] i2c: piix4: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 2/5] dt-bindings: watchdog: renesas-wdt: Document r8a779f0 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 0/9] i2c: piix4: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v4 0/9] i2c: piix4: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v4 9/9] i2c: piix4: Enable EFCH MMIO for Family 17h+
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 9/9] i2c: piix4: Enable EFCH MMIO for Family 17h+
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v4 0/9] i2c: piix4: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• [PATCH v2 5/6] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v2 0/6] ARM: r9a06g032: add support for the watchdogs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v2 2/6] dt-bindings: watchdog: renesas,wdt: Add support for RZ/N1
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/9] i2c: piix4: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v4 9/9] i2c: piix4: Enable EFCH MMIO for Family 17h+
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v4 8/9] i2c: piix4: Add EFCH MMIO support for SMBus port select
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v4 6/9] i2c: piix4: Add EFCH MMIO support to region request and release
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v4 5/9] i2c: piix4: Move SMBus port selection into function
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v4 3/9] i2c: piix4: Move port I/O region request/release code into functions
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v4 4/9] i2c: piix4: Move SMBus controller base address detect into function
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v4 3/9] i2c: piix4: Move port I/O region request/release code into functions
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v4 0/4] Watchdog: sp5100_tco: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 3/5] watchdog: renesas_wdt: Add R-Car Gen4 support
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] clk: renesas: r8a779f0: Add WDT clock
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: watchdog: renesas-wdt: Document r8a779f0 support
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: renesas: spider-cpu: Enable watchdog timer
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] arm64: dts: renesas: r8a779f0: Add RWDT node
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/4] Watchdog: sp5100_tco: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 6/6] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/4] Watchdog: sp5100_tco: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 6/6] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 3/6] dt-bindings: watchdog: renesas,wdt: Add support for RZ/N1
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4 0/9] i2c: piix4: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 0/4] Watchdog: sp5100_tco: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 0/4] Watchdog: sp5100_tco: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2] watchdog: ixp4xx: Implement restart
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] watchdog: ixp4xx: Implement restart
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 6/6] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 6/6] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 3/6] dt-bindings: watchdog: renesas,wdt: Add support for RZ/N1
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH 6/6] watchdog: Add Renesas RZ/N1 Watchdog driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH 0/6] ARM: r9a06g032: add support for the watchdogs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: "Verdun, Jean-Marie" <verdun@xxxxxxx>
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [Openipmi-developer] [PATCH] HPE BMC GXP SUPPORT
  • From: Corey Minyard <minyard@xxxxxxx>
• Re: [PATCH v5 4/4] Watchdog: sp5100_tco: Enable Family 17h+ CPUs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 3/4] Watchdog: sp5100_tco: Add initialization using EFCH MMIO
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 1/4] Watchdog: sp5100_tco: Move timer initialization into function
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: "Verdun, Jean-Marie" <verdun@xxxxxxx>
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Corey Minyard <minyard@xxxxxxx>
• [PATCH] HPE BMC GXP SUPPORT
  • From: nick.hawkins@xxxxxxx
• [PATCH v5 4/4] Watchdog: sp5100_tco: Enable Family 17h+ CPUs
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v5 3/4] Watchdog: sp5100_tco: Add initialization using EFCH MMIO
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v5 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v5 1/4] Watchdog: sp5100_tco: Move timer initialization into function
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v5 0/4] Watchdog: sp5100_tco: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: phy: Add compatible for Mediatek MT8186
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v4 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v4 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v4 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 0/9] i2c: piix4: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v4 0/9] i2c: piix4: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 3/4] Watchdog: sp5100_tco: Add initialization using EFCH MMIO
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 3/4] Watchdog: sp5100_tco: Add initialization using EFCH MMIO
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v4 4/4] Watchdog: sp5100_tco: Enable Family 17h+ CPUs
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v4 3/4] Watchdog: sp5100_tco: Add initialization using EFCH MMIO
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v4 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v4 1/4] Watchdog: sp5100_tco: Move timer initialization into function
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v4 0/4] Watchdog: sp5100_tco: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v4 9/9] i2c: piix4: Enable EFCH MMIO for Family 17h+
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v4 8/9] i2c: piix4: Add EFCH MMIO support for SMBus port select
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v4 6/9] i2c: piix4: Add EFCH MMIO support to region request and release
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v4 7/9] i2c: piix4: Add EFCH MMIO support to SMBus base address detect
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v4 5/9] i2c: piix4: Move SMBus port selection into function
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v4 4/9] i2c: piix4: Move SMBus controller base address detect into function
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v4 3/9] i2c: piix4: Move port I/O region request/release code into functions
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v4 2/9] i2c: piix4: Replace hardcoded memory map size with a #define
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v4 1/9] kernel/resource: Introduce request_mem_region_muxed()
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v4 0/9] i2c: piix4: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• Re: [PATCH v5 0/9] Add MAX77714 PMIC minimal driver (RTC and watchdog only)
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 0/9] Add MAX77714 PMIC minimal driver (RTC and watchdog only)
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 0/9] Add MAX77714 PMIC minimal driver (RTC and watchdog only)
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3] watchdog: imx2_wdg: Alow ping on suspend
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 0/9] Add MAX77714 PMIC minimal driver (RTC and watchdog only)
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: convert faraday,ftwdt010 to yaml
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: convert faraday,ftwdt010 to yaml
  • From: Corentin Labbe <clabbe@xxxxxxxxxxxx>
• Re: [PATCH v3 7/9] i2c: piix4: Add EFCH MMIO support to SMBus base address detect
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH v3] watchdog: imx2_wdg: Alow ping on suspend
  • From: Alistair Francis <alistair@xxxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: imx2_wdg: Alow ping on suspend
  • From: Alistair <alistair@xxxxxxxxxxxxx>
• [PATCH V2] dt-bindings: watchdog: brcm,bcm7038: add more compatible strings
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: brcm,bcm7038: add more compatible strings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: brcm,bcm7038: add more compatible strings
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH v3 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v3 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v3 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v3 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v3 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v3 1/4] Watchdog: sp5100_tco: Move timer initialization into function
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v3 4/4] Watchdog: sp5100_tco: Enable Family 17h+ CPUs
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v3 3/4] Watchdog: sp5100_tco: Add initialization using EFCH MMIO
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v3 7/9] i2c: piix4: Add EFCH MMIO support to SMBus base address detect
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v3 3/4] Watchdog: sp5100_tco: Add initialization using EFCH MMIO
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v3 3/4] Watchdog: sp5100_tco: Add initialization using EFCH MMIO
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v3 3/4] Watchdog: sp5100_tco: Add initialization using EFCH MMIO
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2] watchdog: imx2_wdg: Alow ping on suspend
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 0/4] Watchdog: sp5100_tco: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v2] watchdog: imx2_wdg: Alow ping on suspend
  • From: Alistair Francis <alistair@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: fsl-imx7ulp-wdt: Fix assigned-clock-parents
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 8/9] i2c: piix4: Add EFCH MMIO support for SMBus port select
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 8/9] i2c: piix4: Add EFCH MMIO support for SMBus port select
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: fsl-imx7ulp-wdt: Fix assigned-clock-parents
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: fsl-imx7ulp-wdt: Fix assigned-clock-parents
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 8/9] i2c: piix4: Add EFCH MMIO support for SMBus port select
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v3 7/9] i2c: piix4: Add EFCH MMIO support to SMBus base address detect
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v3 1/9] kernel/resource: Introduce request_muxed_mem_region()
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v3 0/9] i2c: piix4: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 8/9] i2c: piix4: Add EFCH MMIO support for SMBus port select
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 7/9] i2c: piix4: Add EFCH MMIO support to SMBus base address detect
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 1/9] kernel/resource: Introduce request_muxed_mem_region()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v3 8/9] i2c: piix4: Add EFCH MMIO support for SMBus port select
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v3 9/9] i2c: piix4: Enable EFCH MMIO for Family 17h+
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v3 7/9] i2c: piix4: Add EFCH MMIO support to SMBus base address detect
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v3 6/9] i2c: piix4: Add EFCH MMIO support to region request and release
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v3 5/9] i2c: piix4: Move SMBus port selection into function
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v3 4/9] i2c: piix4: Move SMBus controller base address detect into function
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v3 3/9] i2c: piix4: Move port I/O region request/release code into functions
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v3 2/9] i2c: piix4: Replace hardcoded memory map size with a #define
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v3 1/9] kernel/resource: Introduce request_muxed_mem_region()
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v3 0/9] i2c: piix4: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• Re: [PATCH v3 0/4] Watchdog: sp5100_tco: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v3 0/4] Watchdog: sp5100_tco: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 0/4] Watchdog: sp5100_tco: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 0/4] Watchdog: sp5100_tco: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 0/4] Watchdog: sp5100_tco: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v3 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v3 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 0/4] Watchdog: sp5100_tco: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v3 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 1/4] Watchdog: sp5100_tco: Move timer initialization into function
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 8/8] i2c: piix4: Enable EFCH MMIO for Family 17h+
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v2 7/8] i2c: piix4: Add EFCH MMIO support for SMBus port select
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v2 6/8] i2c: piix4: Add EFCH MMIO support to SMBus base address detect
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v2 5/8] i2c: piix4: Add EFCH MMIO support to region request and release
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v2 4/8] i2c: piix4: Move SMBus port selection into function
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v2 3/8] i2c: piix4: Move SMBus controller base address detect into function
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v2 0/8] i2c: piix4: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v2 2/8] i2c: piix4: Move port I/O region request/release code into functions
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v2 1/8] i2c: piix4: Replace hardcoded memory map size with a #define
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v3 4/4] Watchdog: sp5100_tco: Enable Family 17h+ CPUs
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v3 3/4] Watchdog: sp5100_tco: Add initialization using EFCH MMIO
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v3 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v3 1/4] Watchdog: sp5100_tco: Move timer initialization into function
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH v3 0/4] Watchdog: sp5100_tco: Replace cd6h/cd7h port I/O accesses with MMIO accesses
  • From: Terry Bowman <terry.bowman@xxxxxxx>
• [PATCH 3/5] watchdog: renesas_wdt: Add R-Car Gen4 support
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 2/5] dt-bindings: watchdog: renesas-wdt: Document r8a779f0 support
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 1/5] clk: renesas: r8a779f0: Add WDT clock
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 5/5] arm64: dts: renesas: spider-cpu: Enable watchdog timer
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 0/5] arm64: renesas: Add R-Car S4-8 watchdog support on Spider
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 4/5] arm64: dts: renesas: r8a779f0: Add RWDT node
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v5 1/2] watchdog: Add Sunplus SP7021 WDT devicetree bindings documentation
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• [PATCH v5 0/2] Add watchdog driver for Sunplus SP7021 SoC
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• [PATCH v5 2/2] watchdog: Add watchdog driver for Sunplus SP7021
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• Re: Missing ARM TWD Watchdog driver?
  • From: Boris Lysov <arzamas-16@xxxxxxx>
• Re: [PATCH v2] dt-bindings: watchdog: improve QCOM compatible parsing for modern chips
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Missing ARM TWD Watchdog driver?
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: Missing ARM TWD Watchdog driver?
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Missing ARM TWD Watchdog driver?
  • From: Boris Lysov <arzamas-16@xxxxxxx>
• Re: [GIT PULL REQUEST] watchdog - v5.17 Merge window
  • From: pr-tracker-bot@xxxxxxxxxx
• [GIT PULL REQUEST] watchdog - v5.17 Merge window
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: mtk_wdt: mt7986: Add toprgu reset controller support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: mtk_wdt: mt7986: Add toprgu reset controller support
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH 1/2] watchdog: imx2_wdg: Alow ping on suspend
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: imx2_wdg: Alow ping on suspend
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: reset: mt7986: Add reset-controller header file
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• [PATCH v2] dt-bindings: watchdog: improve QCOM compatible parsing for modern chips
  • From: David Heidelberg <david@xxxxxxx>
• Re: [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 0/9] Add MAX77714 PMIC minimal driver (RTC and watchdog only)
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] watchdog: Add Sunplus SP7021 WDT devicetree bindings documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: [PATCH v3 2/4] watchdog: rzg2l_wdt: Use force reset for WDT reset
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] watchdog: rzg2l_wdt: Use force reset for WDT reset
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH v3 2/4] watchdog: rzg2l_wdt: Use force reset for WDT reset
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/4] watchdog: rzg2l_wdt: Use force reset for WDT reset
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] Watchdog: sp5100_tco: Add EFCH SMBus controller initialization using MMIO
  • From: Robert Richter <rrichter@xxxxxxx>
• [PATCH 2/2] ARM: dts: imx7d: remarkable2: set ping-during-suspend for watchdog
  • From: Alistair Francis <alistair@xxxxxxxxxxxxx>
• [PATCH 1/2] watchdog: imx2_wdg: Alow ping on suspend
  • From: Alistair Francis <alistair@xxxxxxxxxxxxx>
• [PATCH 0/2] watchdog: imx_wdt2: Enable ping on suspend support
  • From: Alistair Francis <alistair@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v2 3/4] Watchdog: sp5100_tco: Add EFCH SMBus controller initialization using MMIO
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 3/4] Watchdog: sp5100_tco: Add EFCH SMBus controller initialization using MMIO
  • From: Robert Richter <rrichter@xxxxxxx>
• Re: [PATCH v2 3/4] Watchdog: sp5100_tco: Add EFCH SMBus controller initialization using MMIO
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 3/4] Watchdog: sp5100_tco: Add EFCH SMBus controller initialization using MMIO
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 3/4] Watchdog: sp5100_tco: Add EFCH SMBus controller initialization using MMIO
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v4 2/2] watchdog: Add watchdog driver for Sunplus SP7021
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: remove typo from REALTEK OTTO WATCHDOG section
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] watchdog: mtk_wdt: mt7986: Add toprgu reset controller support
  • From: Sam Shih <sam.shih@xxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: reset: mt7986: Add reset-controller header file
  • From: Sam Shih <sam.shih@xxxxxxxxxxxx>
• [PATCH 0/2] Add toprgu reset-controller support for MT7986
  • From: Sam Shih <sam.shih@xxxxxxxxxxxx>
• [PATCH] watchdog: rti-wdt: Add missing pm_runtime_disable() in probe function
  • From: Miaoqian Lin <linmq006@xxxxxxxxx>
• Re: [PATCH] MAINTAINERS: remove typo from REALTEK OTTO WATCHDOG section
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• [PATCH v3 4/4] watchdog: rzg2l_wdt: Add set_timeout callback
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v3 3/4] watchdog: rzg2l_wdt: Add error check for reset_control_deassert
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v3 2/4] watchdog: rzg2l_wdt: Use force reset for WDT reset
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v3 1/4] watchdog: rzg2l_wdt: Fix 32bit overflow issue
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v2 4/4] watchdog: rzg2l_wdt: Use force reset for WDT reset
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v2 2/4] watchdog: rzg2l_wdt: Add error check for reset_control_{deassert/reset}
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH] MAINTAINERS: remove typo from REALTEK OTTO WATCHDOG section
  • From: Lukas Bulwahn <lukas.bulwahn@xxxxxxxxx>
• RE: [PATCH v4 2/2] watchdog: Add watchdog driver for Sunplus SP7021
  • From: xt.hu[胡先韬] <xt.hu@xxxxxxxxxxx>
• Re: [PATCH v5 0/4] add device drivers for Siemens Industrial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v4 2/2] watchdog: Add watchdog driver for Sunplus SP7021
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v4 2/2] watchdog: Add watchdog driver for Sunplus SP7021
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH v4 2/2] watchdog: Add watchdog driver for Sunplus SP7021
  • From: xt.hu[胡先韬] <xt.hu@xxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: mfd: Fix typo "DA9093" -> "DA9063"
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [PATCH V4 RESEND 1/2] dt-bindings: watchdog: convert Broadcom's WDT to the json-schema
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH V4 RESEND 2/2] dt-bindings: mfd: add Broadcom's Timer-Watchdog block
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 2/2] watchdog: Add watchdog driver for Sunplus SP7021
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH v4 0/2] Add watchdog driver for Sunplus SP7021 SoC
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• [PATCH v4 1/2] watchdog: Add Sunplus SP7021 WDT devicetree bindings documentation
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• [PATCH v4 2/2] watchdog: Add watchdog driver for Sunplus SP7021
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH] watchdog: msc313e: Check if the WDT was running at boot
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [PATCH V4 RESEND 1/2] dt-bindings: watchdog: convert Broadcom's WDT to the json-schema
  • From: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx>
• Re: [RFC 25/32] watchdog: Kconfig: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] watchdog: msc313e: Check if the WDT was running at boot
  • From: Daniel Palmer <daniel@xxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [RFC 25/32] watchdog: Kconfig: add HAS_IOPORT dependencies
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [RFC 25/32] watchdog: Kconfig: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [PATCH v5 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v5 0/4] add device drivers for Siemens Industrial PCs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: mfd: Fix typo "DA9093" -> "DA9063"
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 8/9] watchdog: max77620: add comment to clarify set_timeout procedure
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 7/9] watchdog: max77620: add support for the max77714 variant
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: s3c2410: Fix getting the optional clock
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: s3c2410: Fix getting the optional clock
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH v5 5/9] mfd: max77714: Add driver for Maxim MAX77714 PMIC
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 5/9] mfd: max77714: Add driver for Maxim MAX77714 PMIC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] watchdog: s3c2410: Fix getting the optional clock
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 4/5] dt-bindings: watchdog: da9062: add watchdog timeout mode
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: ie6xx_wdt: Check for null res pointer
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: s3c2410: Fix getting the optional clock
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH v5 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v5 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v2] watchdog: ie6xx_wdt: Check for null res pointer
  • From: Jiasheng Jiang <jiasheng@xxxxxxxxxxx>
• [PATCH] watchdog: ie6xx_wdt: Check for null res pointer
  • From: Jiasheng Jiang <jiasheng@xxxxxxxxxxx>
• Re: [PATCH v5 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v5 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2] watchdog: s3c2410: Use platform_get_irq() to get the interrupt
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: Migrate DA9063 text bindings to YAML
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] watchdog: s3c2410: Use platform_get_irq() to get the interrupt
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] watchdog: s3c2410: Use platform_get_irq() to get the interrupt
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: s3c2410: Use platform_get_irq() to get the interrupt
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: watchdog: Add bindings doc for Sunplus SP7021
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] watchdog: s3c2410: Use platform_get_irq() to get the interrupt
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: s3c2410: Use platform_get_irq() to get the interrupt
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: Migrate DA9063 text bindings to YAML
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: Migrate DA9063 text bindings to YAML
  • From: Alexandre Ghiti <alexandre.ghiti@xxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: mfd: Fix typo "DA9093" -> "DA9063"
  • From: Alexandre Ghiti <alexandre.ghiti@xxxxxxxxxxxxx>
• Re: (subset) [PATCH 00/10] dt-binding patches for sm6350
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v5 3/4] watchdog: simatic-ipc-wdt: add new driver for Siemens Industrial PCs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 3/4] watchdog: simatic-ipc-wdt: add new driver for Siemens Industrial PCs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v5 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: improve QCOM compatible parsing for modern chips
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 07/10] dt-bindings: watchdog: Add SM6350 and SM8250 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 2/2] watchdog: Add driver for Sunplus SP7021
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: watchdog: Add bindings doc for Sunplus SP7021
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• [PATCH v3 0/2] Add watchdog driver for Sunplus SP7021 SoC
  • From: Xiantao Hu <xt.hu@xxxxxxxxxxx>
• RE: [RFC PATCH] watchdog: da9062: Correct the timeout values [Klartext]
  • From: Christoph Niedermaier <cniedermaier@xxxxxxxxxxxxxxxxxx>