Linux Tip Commits

• Date Index

• [tip: x86/core] x86/idle: Clean up idle selection, (continued)
  • [tip: x86/core] x86/idle: Clean up idle selection, tip-bot2 for Thomas Gleixner
• [tip: x86/boot] x86/boot: Use 32-bit XOR to clear registers, tip-bot2 for Uros Bizjak
  • Re: [tip: x86/boot] x86/boot: Use 32-bit XOR to clear registers, Ard Biesheuvel
    • Re: [tip: x86/boot] x86/boot: Use 32-bit XOR to clear registers, Uros Bizjak
      • Re: [tip: x86/boot] x86/boot: Use 32-bit XOR to clear registers, Ard Biesheuvel
• [tip: locking/core] locking/x86: Implement local_xchg() using CMPXCHG without the LOCK prefix, tip-bot2 for Uros Bizjak
• [tip: locking/core] locking/rtmutex: Use try_cmpxchg_relaxed() in mark_rt_mutex_waiters(), tip-bot2 for Uros Bizjak
• [tip: timers/core] tick/sched: Fix build failure for CONFIG_NO_HZ_COMMON=n, tip-bot2 for Arnd Bergmann
• [tip: sched/core] sched/fair: Take the scheduling domain into account in select_idle_smt(), tip-bot2 for Keisuke Nishimura
• [tip: sched/core] sched/fair: Add READ_ONCE() and use existing helper function to access ->avg_irq, tip-bot2 for Shrikanth Hegde
• [tip: sched/core] sched/fair: Simplify the update_sd_pick_busiest() logic, tip-bot2 for David Vernet
• [tip: sched/core] sched/fair: Do strict inequality check for busiest misfit task group, tip-bot2 for David Vernet
• [tip: sched/core] sched/fair: Take the scheduling domain into account in select_idle_core(), tip-bot2 for Keisuke Nishimura
• [tip: sched/core] sched/fair: Remove unnecessary goto in update_sd_lb_stats(), tip-bot2 for David Vernet
• [tip: sched/core] sched/topology: Remove duplicate descriptions from TOPOLOGY_SD_FLAGS, tip-bot2 for Alex Shi
• [tip: sched/core] sched/fair: Remove unused parameter from sched_asym(), tip-bot2 for Alex Shi
• [tip: sched/core] sched/fair: Rework sched_use_asym_prio() and sched_asym_prefer(), tip-bot2 for Alex Shi
• [tip: sched/core] sched/topology: Rename SD_SHARE_PKG_RESOURCES to SD_SHARE_LLC, tip-bot2 for Alex Shi
• [tip: sched/core] sched/fair: Check the SD_ASYM_PACKING flag in sched_use_asym_prio(), tip-bot2 for Alex Shi
• [tip: x86/boot] efi/x86: Set the PE/COFF header's NX compat flag unconditionally, tip-bot2 for Ard Biesheuvel
• [tip: x86/sev] x86/sev: Dump SEV_STATUS, tip-bot2 for Borislav Petkov (AMD)
• [tip: locking/core] locking/qspinlock: Fix 'wait_early' set but not used warning, tip-bot2 for Waiman Long
  • Re: [tip: locking/core] locking/qspinlock: Fix 'wait_early' set but not used warning, Ingo Molnar
    • Re: [tip: locking/core] locking/qspinlock: Fix 'wait_early' set but not used warning, Waiman Long
• [tip: locking/core] locking/mutex: Simplify <linux/mutex.h>, tip-bot2 for Waiman Long
• [tip: locking/core] locking/rwsem: Clarify that RWSEM_READER_OWNED is just a hint, tip-bot2 for Waiman Long
• [tip: locking/core] locking/rwsem: Make DEBUG_RWSEMS and PREEMPT_RT mutually exclusive, tip-bot2 for Waiman Long
• [tip: locking/core] locking/percpu-rwsem: Trigger contention tracepoints only if contended, tip-bot2 for Namhyung Kim
• [tip: x86/urgent] x86/e820: Don't reserve SETUP_RNG_SEED in e820, tip-bot2 for Jiri Bohac
  • <Possible follow-ups>
  • [tip: x86/urgent] x86/e820: Don't reserve SETUP_RNG_SEED in e820, tip-bot2 for Jiri Bohac
  • [tip: x86/urgent] x86/e820: Don't reserve SETUP_RNG_SEED in e820, tip-bot2 for Jiri Bohac
• [tip: x86/boot] x86/boot/64: Load the final kernel GDT during early boot directly, remove startup_gdt[], tip-bot2 for Brian Gerst
• [tip: x86/cleanups] x86/nmi: Remove an unnecessary IS_ENABLED(CONFIG_SMP), tip-bot2 for Xin Li (Intel)
• [tip: irq/core] irqchip/imgpdc: Convert to platform_driver::remove_new() callback, tip-bot2 for Uwe Kleine-König
• [tip: irq/core] irqchip/madera: Convert to platform_driver::remove_new() callback, tip-bot2 for Uwe Kleine-König
• [tip: irq/core] irqchip/imx-intmux: Convert to platform_driver::remove_new() callback, tip-bot2 for Uwe Kleine-König
• [tip: irq/core] irqchip/imx-irqsteer: Convert to platform_driver::remove_new() callback, tip-bot2 for Uwe Kleine-König
• [tip: irq/core] irqchip/keystone: Convert to platform_driver::remove_new() callback, tip-bot2 for Uwe Kleine-König
• [tip: irq/core] irqchip/ls-scfg-msi: Convert to platform_driver::remove_new() callback, tip-bot2 for Uwe Kleine-König
• [tip: irq/core] irqchip/mvebu-pic: Convert to platform_driver::remove_new() callback, tip-bot2 for Uwe Kleine-König
• [tip: irq/core] irqchip/pruss-intc: Convert to platform_driver::remove_new() callback, tip-bot2 for Uwe Kleine-König
• [tip: irq/core] irqchip/renesas-intc-irqpin: Convert to platform_driver::remove_new() callback, tip-bot2 for Uwe Kleine-König
• [tip: irq/core] irqchip/renesas-irqc: Convert to platform_driver::remove_new() callback, tip-bot2 for Uwe Kleine-König
• [tip: irq/core] irqchip/renesas-rza1: Convert to platform_driver::remove_new() callback, tip-bot2 for Uwe Kleine-König
• [tip: irq/core] irqchip/stm32-exti: Convert to platform_driver::remove_new() callback, tip-bot2 for Uwe Kleine-König
• [tip: irq/core] irqchip/ts4800: Convert to platform_driver::remove_new() callback, tip-bot2 for Uwe Kleine-König
• [tip: x86/apic] smp: Avoid 'setup_max_cpus' namespace collision/shadowing, tip-bot2 for Ingo Molnar
• [tip: x86/urgent] x86/bugs: Use fixed addressing for VERW operand, tip-bot2 for Pawan Gupta
• [tip: x86/core] x86/vdso: Move vDSO to mmap region, tip-bot2 for Daniel Micay
• [tip: x86/core] x86: Increase brk randomness entropy for 64-bit systems, tip-bot2 for Kees Cook
• [tip: x86/misc] x86/nmi: Fix the inverse "in NMI handler" check, tip-bot2 for Breno Leitao
• [tip: timers/core] tick/nohz: Remove duplicate between tick_nohz_switch_to_nohz() and tick_setup_sched_timer(), tip-bot2 for Peng Liu
• [tip: timers/core] tick/nohz: Remove duplicate between lowres and highres handlers, tip-bot2 for Peng Liu
• [tip: timers/core] tick/sched: Remove useless oneshot ifdeffery, tip-bot2 for Frederic Weisbecker
• [tip: timers/core] tick: Use IS_ENABLED() whenever possible, tip-bot2 for Frederic Weisbecker
• [tip: timers/core] tick/sched: Rename tick_nohz_stop_sched_tick() to tick_nohz_full_stop_tick(), tip-bot2 for Frederic Weisbecker
• [tip: timers/core] tick/sched: Don't clear ts::next_tick again in can_stop_idle_tick(), tip-bot2 for Frederic Weisbecker
• [tip: timers/core] tick: Start centralizing tick related CPU hotplug operations, tip-bot2 for Frederic Weisbecker
• [tip: timers/core] tick: Move tick cancellation up to CPUHP_AP_TICK_DYING, tip-bot2 for Frederic Weisbecker
• [tip: timers/core] tick: Move broadcast cancellation up to CPUHP_AP_TICK_DYING, tip-bot2 for Frederic Weisbecker
• [tip: timers/core] tick: Assume the tick can't be stopped in NOHZ_MODE_INACTIVE mode, tip-bot2 for Frederic Weisbecker
• [tip: timers/core] tick: Move got_idle_tick away from common flags, tip-bot2 for Frederic Weisbecker
• [tip: timers/core] tick: Move individual bit features to debuggable mask accesses, tip-bot2 for Frederic Weisbecker
• [tip: timers/core] tick: Split nohz and highres features from nohz_mode, tip-bot2 for Frederic Weisbecker
• [tip: timers/core] tick: Shut down low-res tick from dying CPU, tip-bot2 for Frederic Weisbecker
• [tip: timers/core] tick: Assume timekeeping is correctly handed over upon last offline idle call, tip-bot2 for Frederic Weisbecker
• [tip: timers/core] vdso/datapage: Quick fix - use asm/page-def.h for ARM64, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Assert no next dyntick timer look-up while CPU is offline, tip-bot2 for Frederic Weisbecker
• [tip: x86/urgent] x86/cpu: Allow reducing x86_phys_bits during early_identify_cpu(), tip-bot2 for Paolo Bonzini
• [tip: x86/urgent] x86/cpu/intel: Detect TME keyid bits before setting MTRR mask registers, tip-bot2 for Paolo Bonzini
• [tip: irq/msi] irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA, tip-bot2 for Anup Patel
  • <Possible follow-ups>
  • [tip: irq/msi] irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA, tip-bot2 for Anup Patel
• [tip: irq/core] irqchip: Add StarFive external interrupt controller, tip-bot2 for Changhuang Liang
• [tip: irq/core] dt-bindings: interrupt-controller: Add starfive,jh8100-intc, tip-bot2 for Changhuang Liang
• [tip: x86/boot] x86/boot/64: Simplify global variable accesses in GDT/IDT programming, tip-bot2 for Ard Biesheuvel
• [tip: x86/boot] x86/boot/64: Use RIP_REL_REF() to assign 'phys_base', tip-bot2 for Ard Biesheuvel
• [tip: x86/boot] x86/boot/64: Use RIP_REL_REF() to access early_dynamic_pgts[], tip-bot2 for Ard Biesheuvel
• [tip: x86/boot] x86/boot/64: Use RIP_REL_REF() to access '__supported_pte_mask', tip-bot2 for Ard Biesheuvel
• [tip: x86/boot] x86/boot/64: Use RIP_REL_REF() to access early page tables, tip-bot2 for Ard Biesheuvel
• [tip: x86/boot] x86/boot/64: Use RIP_REL_REF() to access early_top_pgt[], tip-bot2 for Ard Biesheuvel
• [tip: x86/apic] smp: Provide 'setup_max_cpus' definition on UP too, tip-bot2 for Ingo Molnar
  • Re: [tip: x86/apic] smp: Provide 'setup_max_cpus' definition on UP too, Borislav Petkov
    • Re: [tip: x86/apic] smp: Provide 'setup_max_cpus' definition on UP too, Ingo Molnar
  • Re: [tip: x86/apic] smp: Provide 'setup_max_cpus' definition on UP too, Thomas Gleixner
  • <Possible follow-ups>
  • [tip: x86/apic] smp: Provide 'setup_max_cpus' definition on UP too, tip-bot2 for Ingo Molnar
• [tip: x86/apic] x86/apic: Build the x86 topology enumeration functions on UP APIC builds too, tip-bot2 for Ingo Molnar
  • <Possible follow-ups>
  • [tip: x86/apic] x86/apic: Build the x86 topology enumeration functions on UP APIC builds too, tip-bot2 for Ingo Molnar
• [tip: irq/msi] x86/apic/msi: Use DOMAIN_BUS_GENERIC_MSI for HPET/IO-APIC domain search, tip-bot2 for Thomas Gleixner
• [tip: x86/boot] x86/trampoline: Bypass compat mode in trampoline_start64() if not needed, tip-bot2 for Kirill A. Shutemov
• [tip: x86/boot] kexec: Allocate kernel above bzImage's pref_address, tip-bot2 for Chris Koch
• [tip: irq/msi] genirq/msi: Export MSI allocation/free functions and provide a conveniance wrapper, tip-bot2 for Nipun Gupta
• [tip: irq/msi] irqchip/riscv-intc: Introduce Andes hart-level interrupt controller, tip-bot2 for Yu Chien Peter Lin
• [tip: irq/msi] irqchip/sifive-plic: Convert PLIC driver into a platform driver, tip-bot2 for Anup Patel
• [tip: irq/msi] irqchip/riscv-intc: Allow large non-standard interrupt number, tip-bot2 for Yu Chien Peter Lin
• [tip: irq/msi] irqchip/sifive-plic: Use dev_xyz() in-place of pr_xyz(), tip-bot2 for Anup Patel
• [tip: irq/msi] irqchip/sifive-plic: Use devm_xyz() for managed allocation, tip-bot2 for Anup Patel
• [tip: irq/msi] irqchip/sifive-plic: Cleanup PLIC contexts upon irqdomain creation failure, tip-bot2 for Anup Patel
• [tip: irq/msi] irqchip/sifive-plic: Use riscv_get_intc_hwnode() to get parent fwnode, tip-bot2 for Anup Patel
• [tip: irq/msi] irqchip/sifive-plic: Parse number of interrupts and contexts early in plic_probe(), tip-bot2 for Anup Patel
• [tip: irq/msi] irqchip/sifive-plic: Improve locking safety by using irqsave/irqrestore, tip-bot2 for Anup Patel
• [tip: irq/msi] irqchip/riscv-intc: Add support for RISC-V AIA, tip-bot2 for Anup Patel
• [tip: irq/msi] genirq/matrix: Dynamic bitmap allocation, tip-bot2 for Björn Töpel
• [tip: x86/tdx] x86/asm: Remove the __iomem annotation of movdir64b()'s dst argument, tip-bot2 for Kai Huang
• [tip: x86/mm] x86/mm/cpa: Warn for set_memory_XXcrypted() VMM fails, tip-bot2 for Rick Edgecombe
• [tip: timers/core] timers: Restructure get_next_timer_interrupt(), tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Move marking timer bases idle into tick_nohz_stop_tick(), tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Split out get next timer interrupt, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Optimization for timer_base_try_to_set_idle(), tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Introduce add_timer() variants which modify timer flags, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Make sure TIMER_PINNED flag is set in add_timer_on(), tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] workqueue: Use global variant for add_timer(), tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Keep the pinned timers separate from the others, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Simplify code in run_local_timers(), tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Split next timer interrupt logic, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Retrieve next expiry of pinned/non-pinned timers separately, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Split out "get next timer interrupt" functionality, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Add get next timer interrupt functionality for remote CPUs, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Implement the hierarchical pull model, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Restructure internal locking, tip-bot2 for Richard Cochran (linutronix GmbH)
• [tip: timers/core] timers: Check if timers base is handled already, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] tick/sched: Split out jiffies update helper function, tip-bot2 for Richard Cochran (linutronix GmbH)
• [tip: timers/core] timers: Introduce function to check timer base is_idle flag, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timer_migration: Add tracepoints, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Always queue timers on the local CPU, tip-bot2 for Anna-Maria Behnsen
• [tip: irq/core] dt-bindings: interrupt-controller: Add support for Amlogic-T7 SoCs, tip-bot2 for Huqiang Qin
• [tip: irq/core] irqchip/meson-gpio: Add support for Amlogic-T7 SoCs, tip-bot2 for Huqiang Qin
• [tip: irq/core] arm64: dts: Add gpio_intc node for Amlogic-T7 SoCs, tip-bot2 for Huqiang Qin
• [tip: smp/core] cpu: Remove stray semicolon, tip-bot2 for Max Kellermann
• [tip: x86/cache] x86/resctrl: Remove lockdep annotation that triggers false positive, tip-bot2 for James Morse
• [tip: x86/asm] x86/insn: Remove superfluous checks from instruction decoding routines, tip-bot2 for Nikolay Borisov
• [tip: x86/asm] x86/insn: Directly assign x86_64 state in insn_init(), tip-bot2 for Nikolay Borisov
• [tip: x86/merge] x86/vdso/kbuild: Group non-standard build attributes and primary object file rules together, tip-bot2 for Ingo Molnar
• [tip: irq/urgent] irqchip/gic-v3-its: Do not assume vPE tables are preallocated, tip-bot2 for Oliver Upton
• [tip: x86/cleanups] x86/apm_32: Remove dead function apm_get_battery_status(), tip-bot2 for Kunwu Chan
• [tip: timers/core] clocksource: Scale the watchdog read retries automatically, tip-bot2 for Feng Tang
• [tip: timers/core] time/kunit: Use correct format specifier, tip-bot2 for David Gow
  • Re: [tip: timers/core] time/kunit: Use correct format specifier, David Gow
    • Re: [tip: timers/core] time/kunit: Use correct format specifier, Shuah Khan
• [tip: irq/urgent] irqchip/mbigen: Don't use bus_get_dev_root() to find the parent, tip-bot2 for Chen Jun
• [tip: irq/core] irqchip/vic: Fix a kernel-doc warning, tip-bot2 for Randy Dunlap
• [tip: timers/core] vdso/helpers: Fix grammar in comments, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] s390/vdso/data: Drop unnecessary header include, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] csky/vdso: Remove superfluous ifdeffery, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] vdso/ARM: Make union vdso_data_store available for all architectures, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] arm64: vdso: Use generic union vdso_data_store, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] riscv: vdso: Use generic union vdso_data_store, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] s390/vdso: Use generic union vdso_data_store, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] LoongArch: vdso: Use generic union vdso_data_store, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] MIPS: vdso: Use generic union vdso_data_store, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] csky/vdso: Use generic union vdso_data_store, tip-bot2 for Anna-Maria Behnsen
• [tip: irq/msi] genirq/irqdomain: Don't call ops->select for DOMAIN_BUS_ANY tokens, tip-bot2 for Marc Zyngier
• [tip: x86/mtrr] x86/pat: Simplify the PAT programming protocol, tip-bot2 for Kirill A. Shutemov
• [tip: locking/core] locking/atomic: scripts: Clarify ordering of conditional atomics, tip-bot2 for Mark Rutland
• [tip: x86/cache] tick/nohz: Move tick_nohz_full_mask declaration outside the #ifdef, tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Free rmid_ptrs from resctrl_exit(), tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Create helper for RMID allocation and mondata dir creation, tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Track the closid with the rmid, tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Move RMID allocation out of mkdir_rdt_prepare(), tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Access per-rmid structures by index, tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Allow RMID allocation to be scoped by CLOSID, tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Track the number of dirty RMID a CLOSID has, tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Use __set_bit()/__clear_bit() instead of open coding, tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Allocate the cleanest CLOSID by searching closid_num_dirty_rmid, tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Move CLOSID/RMID matching and setting to use helpers, tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Add cpumask_any_housekeeping() for limbo/overflow, tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Queue mon_event_read() instead of sending an IPI, tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Allow resctrl_arch_rmid_read() to sleep, tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Allow arch to allocate memory needed in resctrl_arch_rmid_read(), tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Make resctrl_mounted checks explicit, tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Move alloc/mon static keys into helpers, tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Make rdt_enable_key the arch's decision to switch, tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Add helpers for system wide mon/alloc capable, tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Add CPU online callback for resctrl work, tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Allow overflow/limbo handlers to be scheduled on any-but CPU, tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Add CPU offline callback for resctrl work, tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Move domain helper migration into resctrl_offline_cpu(), tip-bot2 for James Morse
• [tip: x86/cache] x86/resctrl: Separate arch and fs resctrl locks, tip-bot2 for James Morse
• [tip: smp/core] cpu: Mark cpu_possible_mask as __ro_after_init, tip-bot2 for Alexey Dobriyan
• [tip: smp/core] smp: Make __smp_processor_id() 0-argument macro, tip-bot2 for Alexey Dobriyan
• [tip: timers/core] timekeeping: Fix cross-timestamp interpolation on counter wrap, tip-bot2 for Peter Hilber
• [tip: timers/core] timekeeping: Fix cross-timestamp interpolation corner case decision, tip-bot2 for Peter Hilber
• [tip: timers/core] timekeeping: Fix cross-timestamp interpolation for non-x86, tip-bot2 for Peter Hilber
• [tip: irq/urgent] PCI/MSI: Prevent MSI hardware interrupt number truncation, tip-bot2 for Vidya Sagar
• [tip: irq/urgent] irqchip/sifive-plic: Enable interrupt if needed before EOI, tip-bot2 for Nam Cao
• [tip: irq/core] genirq: Wake interrupt threads immediately when changing affinity, tip-bot2 for Crystal Wood
• [tip: timers/core] hrtimers: Move hrtimer base related definitions into hrtimer_defs.h, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] hrtimers: Update formatting of documentation, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] tick/sched: Add function description for tick_nohz_next_event(), tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Add struct member description for timer_base, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] jiffies: Transform comment about time_* functions into DOC block, tip-bot2 for Anna-Maria Behnsen
• [tip: x86/apic] x86/cpu: Provide cpu_init/parse_topology(), tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu: Provide cpuid_read() et al., tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu: Add legacy topology parser, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu: Use common topology code for Centaur and Zhaoxin, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu: Move __max_die_per_package to common.c, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu: Provide a sane leaf 0xb/0x1f parser, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu: Use common topology code for Intel, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/amd: Provide a separate accessor for Node ID, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu: Provide an AMD/HYGON specific topology parser, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/smpboot: Teach it about topo.amd_node_id, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu: Use common topology code for AMD, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu: Use common topology code for HYGON, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/mm/numa: Use core domain size on AMD, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/apic: Remove unused phys_pkg_id() callback, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu: Make topology_amd_node_id() use the actual node info, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu: Remove topology.c, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu: Remove x86_coreid_bits, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/apic/uv: Remove the private leaf 0xb parser, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/xen/smp_pv: Remove cpudata fiddling, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/topology: Make the APIC mismatch warnings complete, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/platform/ce4100: Dont override x86_init.mpparse.setup_ioapic_ids, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/apic: Get rid of get_physical_broadcast(), tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/ioapic: Replace some more set bit nonsense, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/ioapic: Make io_apic_get_unique_id() simpler, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/ioapic: Simplify setup_ioapic_ids_from_mpc_nocheck(), tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/apic: Remove check_apicid_used() and ioapic_phys_id_map(), tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/mpparse: Rename default_find_smp_config(), tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/mpparse: Provide separate early/late callbacks, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/mpparse: Prepare for callback separation, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/dtb: Rename x86_dtb_init(), tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/platform/ce4100: Prepare for separate mpparse callbacks, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/platform/intel-mid: Prepare for separate mpparse callbacks, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/jailhouse: Prepare for separate mpparse callbacks, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/xen/smp_pv: Prepare for separate mpparse callbacks, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/hyperv/vtl: Prepare for separate mpparse callbacks, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/mpparse: Switch to new init callbacks, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/mm/numa: Move early mptable evaluation into common code, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/mpparse: Remove the physid_t bitmap wrapper, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/apic: Remove the pointless writeback of boot_cpu_physical_apicid, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/topology: Move registration out of APIC code, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/apic: Remove yet another dubious callback, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/apic: Use a proper define for invalid ACPI CPU ID, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/topology: Provide separate APIC registration functions, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/acpi: Use new APIC registration functions, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/jailhouse: Use new APIC registration function, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/of: Use new APIC registration functions, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/mpparse: Use new APIC registration function, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/acpi: Dont invoke topology_register_apic() for XEN PV, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/topology: Confine topology information, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/xen/smp_pv: Register fake APICs, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/topology: Simplify APIC registration, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/topology: Use a data structure for topology info, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/smpboot: Make error message actually useful, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/topology: Sanitize the APIC admission logic, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/topology: Rework possible CPU management, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu: Detect real BSP on crash kernels, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/topology: Add a mechanism to track topology via APIC IDs, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/topology: Reject unknown APIC IDs on ACPI hotplug, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/topology: Assign hotpluggable CPUIDs during init, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/xen/smp_pv: Count number of vCPUs early, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/topology: Let XEN/PV use topology from CPUID/MADT, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/topology: Use topology bitmaps for sizing, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/topology: Mop up primary thread mask handling, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/topology: Simplify cpu_mark_primary_thread(), tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/topology: Provide logical pkg/die mapping, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/topology: Use topology logical mapping mechanism, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/topology: Retrieve cores per package from topology bitmaps, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/topology: Rename smp_num_siblings, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/topology: Rename topology_max_die_per_package(), tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/topology: Provide __num_[cores|threads]_per_package, tip-bot2 for Thomas Gleixner
• [tip: x86/apic] x86/cpu/topology: Get rid of cpuinfo::x86_max_cores, tip-bot2 for Thomas Gleixner
• [tip: x86/cpu] x86/CPU/AMD: Do the common init on future Zens too, tip-bot2 for Borislav Petkov (AMD)
• [tip: sched/core] sched/core: Simplify code by removing duplicate #ifdefs, tip-bot2 for Shrikanth Hegde
• [tip: irq/msi] irqchip/gic-v3: Make gic_irq_domain_select() robust for zero parameter count, tip-bot2 for Thomas Gleixner
• [tip: irq/msi] genirq/irqdomain: Remove the param count restriction from select(), tip-bot2 for Thomas Gleixner
  • Message not available
    • Re: [tip: irq/msi] genirq/irqdomain: Remove the param count restriction from select(), Marc Zyngier
      • RE: [tip: irq/msi] genirq/irqdomain: Remove the param count restriction from select(), Biju Das
        • RE: [tip: irq/msi] genirq/irqdomain: Remove the param count restriction from select(), Biju Das
      • Re: [tip: irq/msi] genirq/irqdomain: Remove the param count restriction from select(), Thomas Gleixner
        • [tip: irq/msi] irqchip/imx-intmux: Handle pure domain searches correctly, tip-bot2 for Thomas Gleixner
• [tip: irq/msi] genirq/msi: Extend msi_parent_ops, tip-bot2 for Thomas Gleixner
• [tip: irq/msi] genirq/irqdomain: Add DOMAIN_BUS_DEVICE_MSI, tip-bot2 for Thomas Gleixner
• [tip: irq/msi] platform-msi: Prepare for real per device domains, tip-bot2 for Thomas Gleixner
• [tip: irq/msi] irqchip: Convert all platform MSI users to the new API, tip-bot2 for Thomas Gleixner
• [tip: irq/msi] genirq/msi: Provide optional translation op, tip-bot2 for Thomas Gleixner
• [tip: irq/msi] platform-msi: Remove unused interfaces, tip-bot2 for Thomas Gleixner
• [tip: irq/msi] genirq/msi: Split msi_domain_alloc_irq_at(), tip-bot2 for Thomas Gleixner
• [tip: irq/msi] genirq/msi: Provide DOMAIN_BUS_WIRED_TO_MSI, tip-bot2 for Thomas Gleixner
• [tip: irq/msi] genirq/msi: Optionally use dev->fwnode for device domain, tip-bot2 for Thomas Gleixner
• [tip: irq/msi] genirq/msi: Provide allocation/free functions for "wired" MSI interrupts, tip-bot2 for Thomas Gleixner
• [tip: irq/msi] genirq/irqdomain: Reroute device MSI create_mapping, tip-bot2 for Thomas Gleixner
• [tip: irq/msi] genirq/msi: Provide MSI_FLAG_PARENT_PM_DEV, tip-bot2 for Thomas Gleixner
• [tip: x86/cleanups] x86/insn-eval: Fix function param name in get_eff_addr_sib(), tip-bot2 for Randy Dunlap
• [tip: timers/core] hrtimer: Select housekeeping CPU during migration, tip-bot2 for Costa Shulyupin
  • <Possible follow-ups>
  • [tip: timers/core] hrtimer: Select housekeeping CPU during migration, tip-bot2 for Costa Shulyupin
• [tip: x86/alternatives] x86/alternatives: Use a temporary buffer when optimizing NOPs, tip-bot2 for Borislav Petkov (AMD)
  • <Possible follow-ups>
  • [tip: x86/alternatives] x86/alternatives: Use a temporary buffer when optimizing NOPs, tip-bot2 for Borislav Petkov (AMD)
• [tip: x86/alternatives] x86/alternatives: Get rid of __optimize_nops(), tip-bot2 for Borislav Petkov (AMD)
  • <Possible follow-ups>
  • [tip: x86/alternatives] x86/alternatives: Get rid of __optimize_nops(), tip-bot2 for Borislav Petkov (AMD)
• [tip: x86/alternatives] x86/alternatives: Sort local vars in apply_alternatives(), tip-bot2 for Borislav Petkov (AMD)
  • <Possible follow-ups>
  • [tip: x86/alternatives] x86/alternatives: Sort local vars in apply_alternatives(), tip-bot2 for Borislav Petkov (AMD)
• [tip: x86/alternatives] x86/alternatives: Optimize optimize_nops(), tip-bot2 for Borislav Petkov (AMD)
  • <Possible follow-ups>
  • [tip: x86/alternatives] x86/alternatives: Optimize optimize_nops(), tip-bot2 for Borislav Petkov (AMD)
• [tip: x86/misc] Documentation/maintainer-tip: Add C++ tail comments exception, tip-bot2 for Borislav Petkov (AMD)
• [tip: x86/sev] crypto: ccp - Have it depend on AMD_IOMMU, tip-bot2 for Borislav Petkov (AMD)
• [tip: irq/urgent] irqchip/gic-v3-its: Handle non-coherent GICv4 redistributors, tip-bot2 for Marc Zyngier
• [tip: irq/urgent] irqchip/gic-v3-its: Restore quirk probing for ACPI-based systems, tip-bot2 for Marc Zyngier
• [tip: irq/urgent] irqchip/gic-v3-its: Fix GICv4.1 VPE affinity update, tip-bot2 for Marc Zyngier
• [tip: irq/core] irqchip/gic-v3-its: Remove usage of the deprecated ida_simple_xx() API, tip-bot2 for Christophe JAILLET
• [tip: irq/core] irqchip/loongson-eiointc: Skip handling if there is no pending interrupt, tip-bot2 for Bibo Mao
• [tip: irq/core] irqchip/bcm-6345-l1: Prefer struct_size)_ over open coded arithmetic, tip-bot2 for Erick Archer
• [tip: irq/core] irqchip/loongson-eiointc: Remove explicit interrupt affinity restore on resume, tip-bot2 for Bibo Mao
• [tip: irq/core] irqchip/irq-bcm7038-l1: Prefer struct_size over open coded arithmetic, tip-bot2 for Erick Archer
• [tip: irq/urgent] irqchip/loongson-eiointc: Use correct struct type in eiointc_domain_alloc(), tip-bot2 for Bibo Mao
• [tip: irq/urgent] irqchip/qcom-mpm: Fix IS_ERR() vs NULL check in qcom_mpm_init(), tip-bot2 for Dan Carpenter
• [tip: irq/urgent] irqchip/irq-brcmstb-l2: Add write memory barrier before exit, tip-bot2 for Doug Berger
• [tip: x86/urgent] x86/mm/ident_map: Use gbpages only where full GB page should be mapped., tip-bot2 for Steve Wahl
• [tip: x86/urgent] x86/bugs: Add asm helpers for executing VERW, tip-bot2 for Pawan Gupta
  • <Possible follow-ups>
  • [tip: x86/urgent] x86/bugs: Add asm helpers for executing VERW, tip-bot2 for Pawan Gupta
    • Re: [tip: x86/urgent] x86/bugs: Add asm helpers for executing VERW, Nikolay Borisov
      • Re: [tip: x86/urgent] x86/bugs: Add asm helpers for executing VERW, Pawan Gupta
        • Re: [tip: x86/urgent] x86/bugs: Add asm helpers for executing VERW, Nikolay Borisov
          • Re: [tip: x86/urgent] x86/bugs: Add asm helpers for executing VERW, Pawan Gupta
• [tip: x86/urgent] x86/entry_64: Add VERW just before userspace transition, tip-bot2 for Pawan Gupta
  • <Possible follow-ups>
  • [tip: x86/urgent] x86/entry_64: Add VERW just before userspace transition, tip-bot2 for Pawan Gupta
• [tip: x86/urgent] x86/bugs: Use ALTERNATIVE() instead of mds_user_clear static key, tip-bot2 for Pawan Gupta
  • <Possible follow-ups>
  • [tip: x86/urgent] x86/bugs: Use ALTERNATIVE() instead of mds_user_clear static key, tip-bot2 for Pawan Gupta
• [tip: x86/urgent] x86/entry_32: Add VERW just before userspace transition, tip-bot2 for Pawan Gupta
  • <Possible follow-ups>
  • [tip: x86/urgent] x86/entry_32: Add VERW just before userspace transition, tip-bot2 for Pawan Gupta
• [tip: x86/urgent] KVM/VMX: Move VERW closer to VMentry for MDS mitigation, tip-bot2 for Pawan Gupta
  • <Possible follow-ups>
  • [tip: x86/urgent] KVM/VMX: Move VERW closer to VMentry for MDS mitigation, tip-bot2 for Pawan Gupta
• [tip: x86/urgent] KVM/VMX: Use BT+JNC, i.e. EFLAGS.CF to select VMRESUME vs. VMLAUNCH, tip-bot2 for Sean Christopherson
  • <Possible follow-ups>
  • [tip: x86/urgent] KVM/VMX: Use BT+JNC, i.e. EFLAGS.CF to select VMRESUME vs. VMLAUNCH, tip-bot2 for Sean Christopherson
• [tip: timers/ptp] x86/tsc: Correct kernel-doc notation, tip-bot2 for Randy Dunlap
• [tip: timers/ptp] x86/tsc: Add clocksource ID, set system_counterval_t.cs_id, tip-bot2 for Peter Hilber
• [tip: timers/ptp] timekeeping: Add clocksource ID to struct system_counterval_t, tip-bot2 for Peter Hilber
• [tip: timers/ptp] x86/kvm, ptp/kvm: Add clocksource ID, set system_counterval_t.cs_id, tip-bot2 for Peter Hilber
• [tip: timers/ptp] ptp/kvm, arm_arch_timer: Set system_counterval_t.cs_id to constant, tip-bot2 for Peter Hilber
• [tip: timers/ptp] timekeeping: Evaluate system_counterval_t.cs_id instead of .cs, tip-bot2 for Peter Hilber
• [tip: timers/ptp] treewide: Remove system_counterval_t.cs, which is never read, tip-bot2 for Peter Hilber
• [tip: timers/ptp] kvmclock: Unexport kvmclock clocksource, tip-bot2 for Peter Hilber
• [tip: x86/urgent] x86/Kconfig: Transmeta Crusoe is CPU family 5, not 6, tip-bot2 for Aleksander Mazur
• [tip: x86/vdso] x86/vdso: Consolidate targets and clean-files, tip-bot2 for Masahiro Yamada
• [tip: x86/vdso] x86/vdso: Simplify obj-y addition, tip-bot2 for Masahiro Yamada
• [tip: x86/vdso] x86/vdso: Use CONFIG_COMPAT_32 to specify vdso32, tip-bot2 for Masahiro Yamada
• [tip: x86/vdso] x86/vdso: Use $(addprefix ) instead of $(foreach ), tip-bot2 for Masahiro Yamada
• [tip: x86/sev] iommu/amd: Fix failure return from snp_lookup_rmpentry(), tip-bot2 for Ashish Kalra
• [tip: timers/core] clocksource: Make clocksource_subsys const, tip-bot2 for Ricardo B. Marliere
• [tip: timers/core] clockevents: Make clockevents_subsys const, tip-bot2 for Ricardo B. Marliere
• [tip: x86/sev] x86/sev: Fix position dependent variable references in startup code, tip-bot2 for Ard Biesheuvel
• [tip: timers/urgent] hrtimer: Report offline hrtimer enqueue, tip-bot2 for Frederic Weisbecker
• [tip: x86/boot] x86/boot: Add error_putdec() helper, tip-bot2 for H. Peter Anvin
• [tip: ras/core] x86/mce: Make mce_subsys const, tip-bot2 for Ricardo B. Marliere
• [tip: x86/sev] x86/Kconfig: Remove CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT, tip-bot2 for Borislav Petkov (AMD)
• [tip: x86/sev] crypto: ccp: Make snp_range_list static, tip-bot2 for Borislav Petkov (AMD)
• [tip: x86/sev] Documentation: virt: Fix up pre-formatted text block for SEV ioctls, tip-bot2 for Michael Roth
• [tip: x86/fred] MAINTAINERS: Add a maintainer entry for FRED, tip-bot2 for Xin Li (Intel)
• [tip: x86/fred] x86/fred: Fix a build warning with allmodconfig due to 'inline' failing to inline properly, tip-bot2 for Xin Li (Intel)
• [tip: x86/boot] x86/startup_64: Drop long return to initial_code pointer, tip-bot2 for Ard Biesheuvel
• [tip: x86/fred] x86/fred: Add a fred= cmdline param, tip-bot2 for Xin Li
• [tip: x86/build] x86/setup: Move UAPI setup structures into setup_data.h, tip-bot2 for Thomas Zimmermann
• [tip: x86/build] x86/setup: Move internal setup_data structures into setup_data.h, tip-bot2 for Thomas Zimmermann
• [tip: x86/build] x86: Do not include <asm/bootparam.h> in several files, tip-bot2 for Thomas Zimmermann
• [tip: x86/build] x86/efi: Implement arch_ima_efi_boot_mode() in source file, tip-bot2 for Thomas Zimmermann
• [tip: x86/sev] x86/cpufeatures: Add SEV-SNP CPU feature, tip-bot2 for Brijesh Singh
• [tip: x86/sev] x86/speculation: Do not enable Automatic IBRS if SEV-SNP is enabled, tip-bot2 for Kim Phillips
• [tip: x86/sev] x86/sev: Add SEV-SNP host initialization support, tip-bot2 for Brijesh Singh
• [tip: x86/sev] iommu/amd: Don't rely on external callers to enable IOMMU SNP support, tip-bot2 for Ashish Kalra
• [tip: x86/sev] x86/mtrr: Don't print errors if MtrrFixDramModEn is set when SNP enabled, tip-bot2 for Ashish Kalra
• [tip: x86/sev] x86/sev: Add RMP entry lookup helpers, tip-bot2 for Brijesh Singh
• [tip: x86/sev] x86/fault: Add helper for dumping RMP entries, tip-bot2 for Brijesh Singh
• [tip: x86/sev] x86/traps: Define RMP violation #PF error code, tip-bot2 for Brijesh Singh
• [tip: x86/sev] x86/fault: Dump RMP table information when RMP page faults occur, tip-bot2 for Michael Roth
• [tip: x86/sev] x86/sev: Add helper functions for RMPUPDATE and PSMASH instruction, tip-bot2 for Brijesh Singh
• [tip: x86/sev] x86/sev: Adjust the directmap to avoid inadvertent RMP faults, tip-bot2 for Michael Roth
• [tip: x86/sev] crypto: ccp: Add support to initialize the AMD-SP for SEV-SNP, tip-bot2 for Brijesh Singh
• [tip: x86/sev] crypto: ccp: Define the SEV-SNP commands, tip-bot2 for Brijesh Singh
• [tip: x86/sev] crypto: ccp: Provide an API to issue SEV and SNP commands, tip-bot2 for Brijesh Singh
• [tip: x86/sev] x86/sev: Introduce an SNP leaked pages list, tip-bot2 for Ashish Kalra
• [tip: x86/sev] crypto: ccp: Handle the legacy TMR allocation when SNP is enabled, tip-bot2 for Brijesh Singh
• [tip: x86/sev] crypto: ccp: Handle non-volatile INIT_EX data when SNP is enabled, tip-bot2 for Tom Lendacky
• [tip: x86/sev] crypto: ccp: Handle legacy SEV commands when SNP is enabled, tip-bot2 for Brijesh Singh
• [tip: x86/sev] iommu/amd: Clean up RMP entries for IOMMU pages during SNP shutdown, tip-bot2 for Ashish Kalra
• [tip: x86/sev] crypto: ccp: Add panic notifier for SEV/SNP firmware shutdown on kdump, tip-bot2 for Ashish Kalra
• [tip: x86/sev] KVM: SEV: Make AVIC backing, VMSA and VMCB memory allocation SNP safe, tip-bot2 for Brijesh Singh
• [tip: x86/sev] x86/cpufeatures: Enable/unmask SEV-SNP CPU feature, tip-bot2 for Michael Roth
• [tip: x86/sev] crypto: ccp: Add the SNP_PLATFORM_STATUS command, tip-bot2 for Brijesh Singh
• [tip: x86/sev] crypto: ccp: Add the SNP_COMMIT command, tip-bot2 for Tom Lendacky
• [tip: x86/sev] crypto: ccp: Add the SNP_SET_CONFIG command, tip-bot2 for Brijesh Singh
• [tip: x86/urgent] x86/fpu: Stop relying on userspace for info to fault in xsave buffer, tip-bot2 for Andrei Vagin
• [tip: x86/urgent] x86/lib: Revert to _ASM_EXTABLE_UA() for {get,put}_user() fixups, tip-bot2 for Qiuxu Zhuo
• [tip: irq/core] genirq/irq_sim: Shrink code by using <linux/cleanup.h> helpers, tip-bot2 for Bartosz Golaszewski
• [tip: x86/sev] x86/sme: Fix memory encryption setting if enabled by default and not overridden, tip-bot2 for Ard Biesheuvel
  • <Possible follow-ups>
  • [tip: x86/sev] x86/sme: Fix memory encryption setting if enabled by default and not overridden, tip-bot2 for Ard Biesheuvel
• [tip: smp/core] kernel/cpu: Convert snprintf() to sysfs_emit(), tip-bot2 for Li Zhijian
• [tip: smp/core] cpu/hotplug: Delete an extraneous kernel-doc description, tip-bot2 for Randy Dunlap
• [tip: irq/core] bitmap: Define a cleanup function for bitmaps, tip-bot2 for Bartosz Golaszewski
• [tip: irq/core] genirq/irq_sim: Order headers alphabetically, tip-bot2 for Bartosz Golaszewski
• [tip: irq/core] genirq/irq_sim: Remove unused field from struct irq_sim_irq_ctx, tip-bot2 for Bartosz Golaszewski
• [tip: irq/core] genirq/irq_sim: Shrink code by using cleanup helpers, tip-bot2 for Bartosz Golaszewski
  • Re: [tip: irq/core] genirq/irq_sim: Shrink code by using cleanup helpers, Nathan Chancellor
    • Re: [tip: irq/core] genirq/irq_sim: Shrink code by using cleanup helpers, Bartosz Golaszewski
      • Re: [tip: irq/core] genirq/irq_sim: Shrink code by using cleanup helpers, Ingo Molnar
        • Re: [tip: irq/core] genirq/irq_sim: Shrink code by using cleanup helpers, Bartosz Golaszewski
• [tip: x86/mm] x86/mm: Get rid of conditional IF flag handling in page fault path, tip-bot2 for Linus Torvalds
• [tip: x86/fred] x86/cpufeatures,opcode,msr: Add the WRMSRNS instruction support, tip-bot2 for Xin Li
• [tip: x86/fred] x86/entry: Remove idtentry_sysvec from entry_{32,64}.S, tip-bot2 for Xin Li
• [tip: x86/fred] x86/trapnr: Add event type macros to <asm/trapnr.h>, tip-bot2 for Xin Li
• [tip: x86/fred] Documentation/x86/64: Add documentation for FRED, tip-bot2 for Xin Li
• [tip: x86/fred] x86/fred: Add Kconfig option for FRED (CONFIG_X86_FRED), tip-bot2 for H. Peter Anvin (Intel)
• [tip: x86/fred] x86/cpufeatures: Add the CPU feature bit for FRED, tip-bot2 for H. Peter Anvin (Intel)
• [tip: x86/fred] x86/fred: Disable FRED support if CONFIG_X86_FRED is disabled, tip-bot2 for H. Peter Anvin (Intel)
• [tip: x86/fred] x86/fred: Disable FRED by default in its early stage, tip-bot2 for Xin Li
• [tip: x86/fred] x86/opcode: Add ERET[US] instructions to the x86 opcode map, tip-bot2 for H. Peter Anvin (Intel)
  • <Possible follow-ups>
  • [tip: x86/fred] x86/opcode: Add ERET[US] instructions to the x86 opcode map, tip-bot2 for H. Peter Anvin (Intel)
  • [tip: x86/fred] x86/opcode: Add ERET[US] instructions to the x86 opcode map, tip-bot2 for H. Peter Anvin (Intel)
• [tip: x86/fred] x86/objtool: Teach objtool about ERET[US], tip-bot2 for H. Peter Anvin (Intel)
  • <Possible follow-ups>
  • [tip: x86/fred] x86/objtool: Teach objtool about ERET[US], tip-bot2 for H. Peter Anvin (Intel)
  • [tip: x86/fred] x86/objtool: Teach objtool about ERET[US], tip-bot2 for H. Peter Anvin (Intel)
• [tip: x86/fred] x86/cpu: Add X86_CR4_FRED macro, tip-bot2 for H. Peter Anvin (Intel)
  • <Possible follow-ups>
  • [tip: x86/fred] x86/cpu: Add X86_CR4_FRED macro, tip-bot2 for H. Peter Anvin (Intel)
  • [tip: x86/fred] x86/cpu: Add X86_CR4_FRED macro, tip-bot2 for H. Peter Anvin (Intel)
• [tip: x86/fred] x86/cpu: Add MSR numbers for FRED configuration, tip-bot2 for H. Peter Anvin (Intel)
  • <Possible follow-ups>
  • [tip: x86/fred] x86/cpu: Add MSR numbers for FRED configuration, tip-bot2 for H. Peter Anvin (Intel)
  • [tip: x86/fred] x86/cpu: Add MSR numbers for FRED configuration, tip-bot2 for H. Peter Anvin (Intel)
• [tip: x86/fred] x86/ptrace: Cleanup the definition of the pt_regs structure, tip-bot2 for Xin Li
  • <Possible follow-ups>
  • [tip: x86/fred] x86/ptrace: Cleanup the definition of the pt_regs structure, tip-bot2 for Xin Li
  • [tip: x86/fred] x86/ptrace: Cleanup the definition of the pt_regs structure, tip-bot2 for Xin Li
    • Re: [tip: x86/fred] x86/ptrace: Cleanup the definition of the pt_regs structure, H. Peter Anvin
      • Re: [tip: x86/fred] x86/ptrace: Cleanup the definition of the pt_regs structure, Xin Li
        • Re: [tip: x86/fred] x86/ptrace: Cleanup the definition of the pt_regs structure, H. Peter Anvin
          • Re: [tip: x86/fred] x86/ptrace: Cleanup the definition of the pt_regs structure, H.J. Lu
• [tip: x86/fred] x86/ptrace: Add FRED additional information to the pt_regs structure, tip-bot2 for Xin Li
  • <Possible follow-ups>
  • [tip: x86/fred] x86/ptrace: Add FRED additional information to the pt_regs structure, tip-bot2 for Xin Li
  • [tip: x86/fred] x86/ptrace: Add FRED additional information to the pt_regs structure, tip-bot2 for Xin Li
• [tip: x86/fred] x86/fred: Update MSR_IA32_FRED_RSP0 during task switch, tip-bot2 for H. Peter Anvin (Intel)
  • <Possible follow-ups>
  • [tip: x86/fred] x86/fred: Update MSR_IA32_FRED_RSP0 during task switch, tip-bot2 for H. Peter Anvin (Intel)
  • [tip: x86/fred] x86/fred: Update MSR_IA32_FRED_RSP0 during task switch, tip-bot2 for H. Peter Anvin (Intel)
• [tip: x86/fred] x86/fred: No ESPFIX needed when FRED is enabled, tip-bot2 for H. Peter Anvin (Intel)
  • <Possible follow-ups>
  • [tip: x86/fred] x86/fred: No ESPFIX needed when FRED is enabled, tip-bot2 for H. Peter Anvin (Intel)
  • [tip: x86/fred] x86/fred: No ESPFIX needed when FRED is enabled, tip-bot2 for H. Peter Anvin (Intel)
• [tip: x86/fred] x86/fred: Add a debug fault entry stub for FRED, tip-bot2 for H. Peter Anvin (Intel)
  • <Possible follow-ups>
  • [tip: x86/fred] x86/fred: Add a debug fault entry stub for FRED, tip-bot2 for H. Peter Anvin (Intel)
  • [tip: x86/fred] x86/fred: Add a debug fault entry stub for FRED, tip-bot2 for H. Peter Anvin (Intel)
• [tip: x86/fred] x86/idtentry: Incorporate definitions/declarations of the FRED entries, tip-bot2 for Xin Li
  • <Possible follow-ups>
  • [tip: x86/fred] x86/idtentry: Incorporate definitions/declarations of the FRED entries, tip-bot2 for Xin Li
  • [tip: x86/fred] x86/idtentry: Incorporate definitions/declarations of the FRED entries, tip-bot2 for Xin Li
• [tip: x86/fred] x86/fred: Add a new header file for FRED definitions, tip-bot2 for H. Peter Anvin (Intel)
  • <Possible follow-ups>
  • [tip: x86/fred] x86/fred: Add a new header file for FRED definitions, tip-bot2 for H. Peter Anvin (Intel)
  • [tip: x86/fred] x86/fred: Add a new header file for FRED definitions, tip-bot2 for H. Peter Anvin (Intel)
• [tip: x86/fred] x86/fred: Disallow the swapgs instruction when FRED is enabled, tip-bot2 for H. Peter Anvin (Intel)
  • <Possible follow-ups>
  • [tip: x86/fred] x86/fred: Disallow the swapgs instruction when FRED is enabled, tip-bot2 for H. Peter Anvin (Intel)
  • [tip: x86/fred] x86/fred: Disallow the swapgs instruction when FRED is enabled, tip-bot2 for H. Peter Anvin (Intel)
• [tip: x86/fred] x86/fred: Reserve space for the FRED stack frame, tip-bot2 for H. Peter Anvin (Intel)
  • <Possible follow-ups>
  • [tip: x86/fred] x86/fred: Reserve space for the FRED stack frame, tip-bot2 for H. Peter Anvin (Intel)
  • [tip: x86/fred] x86/fred: Reserve space for the FRED stack frame, tip-bot2 for H. Peter Anvin (Intel)
• [tip: x86/fred] x86/fred: Make exc_page_fault() work for FRED, tip-bot2 for H. Peter Anvin (Intel)
  • <Possible follow-ups>
  • [tip: x86/fred] x86/fred: Make exc_page_fault() work for FRED, tip-bot2 for H. Peter Anvin (Intel)
  • [tip: x86/fred] x86/fred: Make exc_page_fault() work for FRED, tip-bot2 for H. Peter Anvin (Intel)
• [tip: x86/fred] x86/fred: Allow single-step trap and NMI when starting a new task, tip-bot2 for H. Peter Anvin (Intel)
  • <Possible follow-ups>
  • [tip: x86/fred] x86/fred: Allow single-step trap and NMI when starting a new task, tip-bot2 for H. Peter Anvin (Intel)
  • [tip: x86/fred] x86/fred: Allow single-step trap and NMI when starting a new task, tip-bot2 for H. Peter Anvin (Intel)
• [tip: x86/fred] x86/fred: Add a NMI entry stub for FRED, tip-bot2 for H. Peter Anvin (Intel)
  • <Possible follow-ups>
  • [tip: x86/fred] x86/fred: Add a NMI entry stub for FRED, tip-bot2 for H. Peter Anvin (Intel)
  • [tip: x86/fred] x86/fred: Add a NMI entry stub for FRED, tip-bot2 for H. Peter Anvin (Intel)
• [tip: x86/fred] x86/fred: FRED entry/exit and dispatch code, tip-bot2 for H. Peter Anvin (Intel)
  • Re: [tip: x86/fred] x86/fred: FRED entry/exit and dispatch code, Borislav Petkov
  • <Possible follow-ups>
  • [tip: x86/fred] x86/fred: FRED entry/exit and dispatch code, tip-bot2 for H. Peter Anvin (Intel)
  • [tip: x86/fred] x86/fred: FRED entry/exit and dispatch code, tip-bot2 for H. Peter Anvin (Intel)
• [tip: x86/fred] x86/fred: Fixup fault on ERETU by jumping to fred_entrypoint_user, tip-bot2 for Xin Li
  • <Possible follow-ups>
  • [tip: x86/fred] x86/fred: Fixup fault on ERETU by jumping to fred_entrypoint_user, tip-bot2 for Xin Li
  • [tip: x86/fred] x86/fred: Fixup fault on ERETU by jumping to fred_entrypoint_user, tip-bot2 for Xin Li
• [tip: x86/fred] KVM: VMX: Call fred_entry_from_kvm() for IRQ/NMI handling, tip-bot2 for Xin Li
  • <Possible follow-ups>
  • [tip: x86/fred] KVM: VMX: Call fred_entry_from_kvm() for IRQ/NMI handling, tip-bot2 for Xin Li
  • [tip: x86/fred] KVM: VMX: Call fred_entry_from_kvm() for IRQ/NMI handling, tip-bot2 for Xin Li
• [tip: x86/fred] x86/traps: Add sysvec_install() to install a system interrupt handler, tip-bot2 for Xin Li
  • <Possible follow-ups>
  • [tip: x86/fred] x86/traps: Add sysvec_install() to install a system interrupt handler, tip-bot2 for Xin Li
  • [tip: x86/fred] x86/traps: Add sysvec_install() to install a system interrupt handler, tip-bot2 for Xin Li
• [tip: x86/fred] x86/fred: Add a machine check entry stub for FRED, tip-bot2 for Xin Li
  • <Possible follow-ups>
  • [tip: x86/fred] x86/fred: Add a machine check entry stub for FRED, tip-bot2 for Xin Li
  • [tip: x86/fred] x86/fred: Add a machine check entry stub for FRED, tip-bot2 for Xin Li
• [tip: x86/fred] x86/fred: Let ret_from_fork_asm() jmp to asm_fred_exit_user when FRED is enabled, tip-bot2 for H. Peter Anvin (Intel)
  • <Possible follow-ups>
  • [tip: x86/fred] x86/fred: Let ret_from_fork_asm() jmp to asm_fred_exit_user when FRED is enabled, tip-bot2 for H. Peter Anvin (Intel)
  • [tip: x86/fred] x86/fred: Let ret_from_fork_asm() jmp to asm_fred_exit_user when FRED is enabled, tip-bot2 for H. Peter Anvin (Intel)
• [tip: x86/fred] x86/entry/calling: Allow PUSH_AND_CLEAR_REGS being used beyond actual entry code, tip-bot2 for Peter Zijlstra (Intel)
  • <Possible follow-ups>
  • [tip: x86/fred] x86/entry/calling: Allow PUSH_AND_CLEAR_REGS being used beyond actual entry code, tip-bot2 for Peter Zijlstra (Intel)
  • [tip: x86/fred] x86/entry/calling: Allow PUSH_AND_CLEAR_REGS being used beyond actual entry code, tip-bot2 for Peter Zijlstra (Intel)
• [tip: x86/fred] x86/entry: Add fred_entry_from_kvm() for VMX to handle IRQ/NMI, tip-bot2 for Xin Li
  • <Possible follow-ups>
  • [tip: x86/fred] x86/entry: Add fred_entry_from_kvm() for VMX to handle IRQ/NMI, tip-bot2 for Xin Li
  • [tip: x86/fred] x86/entry: Add fred_entry_from_kvm() for VMX to handle IRQ/NMI, tip-bot2 for Xin Li
• [tip: x86/fred] x86/syscall: Split IDT syscall setup code into idt_syscall_init(), tip-bot2 for Xin Li
  • <Possible follow-ups>
  • [tip: x86/fred] x86/syscall: Split IDT syscall setup code into idt_syscall_init(), tip-bot2 for Xin Li
  • [tip: x86/fred] x86/syscall: Split IDT syscall setup code into idt_syscall_init(), tip-bot2 for Xin Li
• [tip: x86/fred] x86/fred: Add FRED initialization functions, tip-bot2 for H. Peter Anvin (Intel)
  • <Possible follow-ups>
  • [tip: x86/fred] x86/fred: Add FRED initialization functions, tip-bot2 for H. Peter Anvin (Intel)
  • [tip: x86/fred] x86/fred: Add FRED initialization functions, tip-bot2 for H. Peter Anvin (Intel)
• [tip: x86/fred] x86/fred: Invoke FRED initialization code to enable FRED, tip-bot2 for H. Peter Anvin (Intel)
  • <Possible follow-ups>
  • [tip: x86/fred] x86/fred: Invoke FRED initialization code to enable FRED, tip-bot2 for H. Peter Anvin (Intel)
  • [tip: x86/fred] x86/fred: Invoke FRED initialization code to enable FRED, tip-bot2 for H. Peter Anvin (Intel)
• [tip: x86/misc] Documentation/maintainer-tip: Add Closes tag, tip-bot2 for Borislav Petkov (AMD)
• [tip: x86/misc] x86/nmi: Rate limit unknown NMI messages, tip-bot2 for Namhyung Kim
• [tip: x86/urgent] x86/CPU/AMD: Add more models to X86_FEATURE_ZEN5, tip-bot2 for Mario Limonciello
• [tip: timers/urgent] tick/sched: Preserve number of idle sleeps across CPU hotplug events, tip-bot2 for Tim Chen
• [tip: timers/urgent] clocksource: Skip watchdog check for large watchdog intervals, tip-bot2 for Jiri Wiesner
• [tip: x86/cache] x86/resctrl: Remove redundant variable in mbm_config_write_domain(), tip-bot2 for Babu Moger
• [tip: x86/sev] x86/mm: Fix memory encryption features advertisement, tip-bot2 for Kirill A. Shutemov
  • <Possible follow-ups>
  • [tip: x86/sev] x86/mm: Fix memory encryption features advertisement, tip-bot2 for Kirill A. Shutemov
• [tip: x86/entry] x86/entry: Avoid redundant CR3 write on paranoid returns, tip-bot2 for Lai Jiangshan
  • Re: [tip: x86/entry] x86/entry: Avoid redundant CR3 write on paranoid returns, Brendan Jackman
    • Re: [tip: x86/entry] x86/entry: Avoid redundant CR3 write on paranoid returns, Borislav Petkov
      • Re: [tip: x86/entry] x86/entry: Avoid redundant CR3 write on paranoid returns, Brendan Jackman
• [tip: irq/core] genirq: Initialize resend_node hlist for all interrupt descriptors, tip-bot2 for Dawei Li
• [tip: irq/core] irqchip/gic-v3: Use readl_relaxed_poll_timeout_atomic(), tip-bot2 for Dawei Li
• [tip: irq/core] irqchip/gic(v3): Replace gic_irq() with irqd_to_hwirq(), tip-bot2 for Dawei Li
• [tip: irq/core] genirq: Remove unneeded forward declaration, tip-bot2 for Dawei Li
• [tip: irq/core] genirq: Deduplicate interrupt descriptor initialization, tip-bot2 for Dawei Li
• [tip: x86/urgent] x86/entry/ia32: Ensure s32 is sign extended to s64, tip-bot2 for Richard Palethorpe
• [tip: x86/cache] x86/resctrl: Implement new mba_MBps throttling heuristic, tip-bot2 for Tony Luck
• [tip: x86/misc] Documentation/kernel-parameters: Add spec_rstack_overflow to mitigations=off, tip-bot2 for Borislav Petkov (AMD)
• [tip: x86/cache] x86/resctrl: Remove hard-coded memory bandwidth limit, tip-bot2 for Babu Moger
• [tip: x86/cache] x86/resctrl: Read supported bandwidth sources from CPUID, tip-bot2 for Babu Moger
• [tip: x86/urgent] x86/cpu: Add model number for Intel Clearwater Forest processor, tip-bot2 for Tony Luck
• [tip: x86/urgent] x86/CPU/AMD: Add X86_FEATURE_ZEN5, tip-bot2 for Borislav Petkov (AMD)
• [tip: x86/cache] x86/resctrl: Fix unused variable warning in cache_alloc_hsw_probe(), tip-bot2 for Tony Luck
• [tip: x86/urgent] x86/paravirt: Make BUG_func() usable by non-GPL modules, tip-bot2 for Juergen Gross
• [tip: x86/sev] x86/sev: Harden #VC instruction emulation somewhat, tip-bot2 for Borislav Petkov (AMD)
  • <Possible follow-ups>
  • [tip: x86/sev] x86/sev: Harden #VC instruction emulation somewhat, tip-bot2 for Borislav Petkov (AMD)
• [tip: x86/cpu] x86/CPU/AMD: Add X86_FEATURE_ZEN5, tip-bot2 for Borislav Petkov (AMD)
• [tip: timers/core] tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug, tip-bot2 for Heiko Carstens
• [tip: locking/urgent] futex: Prevent the reuse of stale pi_state, tip-bot2 for Sebastian Andrzej Siewior
• [tip: timers/core] Merge tag 'timers-v6.8-rc1' of http://git.linaro.org/people/daniel.lezcano/linux into timers/core, tip-bot2 for Thomas Gleixner
• [tip: timers/core] dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs, tip-bot2 for Inochi Amaoto
• [tip: timers/core] dt-bindings: timer: Add StarFive JH8100 clint, tip-bot2 for Sia Jee Heng
• [tip: timers/core] clocksource/timer-riscv: Add riscv_clock_shutdown callback, tip-bot2 for Joshua Yeong
• [tip: timers/core] clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings, tip-bot2 for Tony Lindgren
• [tip: timers/core] clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings, tip-bot2 for Randy Dunlap
• [tip: timers/core] clocksource/drivers/ep93xx: Fix error handling during probe, tip-bot2 for Arnd Bergmann
• [online-sales #84640] AutoReply: Webform submission from: ContactUsForm > Body, Online Tickets Sales via RT
• [tip: sched/urgent] sched/fair: Fix frequency selection for non-invariant case, tip-bot2 for Vincent Guittot
• [tip: sched/urgent] Revert "sched/cpufreq: Rework schedutil governor performance estimation" and dependent commit, tip-bot2 for Ingo Molnar
• [tip: sched/urgent] Revert "sched/cpufreq: Rework schedutil governor performance estimation" and dependent commits, tip-bot2 for Ingo Molnar
• [tip: x86/bugs] x86/bugs: Rename CONFIG_GDS_FORCE_MITIGATION => CONFIG_MITIGATION_GDS_FORCE, tip-bot2 for Breno Leitao
• [tip: x86/bugs] x86/bugs: Rename CONFIG_CPU_IBPB_ENTRY => CONFIG_MITIGATION_IBPB_ENTRY, tip-bot2 for Breno Leitao
• [tip: x86/bugs] x86/bugs: Rename CONFIG_RETPOLINE => CONFIG_MITIGATION_RETPOLINE, tip-bot2 for Breno Leitao
• [tip: x86/bugs] x86/bugs: Rename CONFIG_CALL_DEPTH_TRACKING => CONFIG_MITIGATION_CALL_DEPTH_TRACKING, tip-bot2 for Breno Leitao
• [tip: x86/bugs] x86/bugs: Rename CONFIG_PAGE_TABLE_ISOLATION => CONFIG_MITIGATION_PAGE_TABLE_ISOLATION, tip-bot2 for Breno Leitao
• [tip: x86/bugs] x86/bugs: Rename CONFIG_SLS => CONFIG_MITIGATION_SLS, tip-bot2 for Breno Leitao
• [tip: x86/bugs] x86/bugs: Rename CONFIG_CPU_UNRET_ENTRY => CONFIG_MITIGATION_UNRET_ENTRY, tip-bot2 for Breno Leitao
• [tip: x86/bugs] x86/bugs: Rename CONFIG_CPU_IBRS_ENTRY => CONFIG_MITIGATION_IBRS_ENTRY, tip-bot2 for Breno Leitao
• [tip: x86/bugs] x86/bugs: Rename CONFIG_CPU_SRSO => CONFIG_MITIGATION_SRSO, tip-bot2 for Breno Leitao
• [tip: x86/bugs] x86/bugs: Rename CONFIG_RETHUNK => CONFIG_MITIGATION_RETHUNK, tip-bot2 for Breno Leitao
• [tip: x86/percpu] x86/percpu: Use %RIP-relative address in untagged_addr(), tip-bot2 for Uros Bizjak
• [tip: x86/build] x86/tools: objdump_reformat.awk: Skip bad instructions from llvm-objdump, tip-bot2 for Nathan Chancellor
• [tip: ras/core] RAS: Introduce AMD Address Translation Library, tip-bot2 for Yazen Ghannam
• [tip: ras/core] EDAC/amd64: Use new AMD Address Translation Library, tip-bot2 for Yazen Ghannam
• [tip: ras/core] Documentation: RAS: Add index and address translation section, tip-bot2 for Yazen Ghannam
• [tip: x86/cleanups] arch/x86: Fix typos, tip-bot2 for Bjorn Helgaas
• [tip: x86/sev] virt: sev-guest: Convert to platform remove callback returning void, tip-bot2 for Uwe Kleine-König
• [tip: x86/paravirt] x86/alternative: Correct feature bit debug output, tip-bot2 for Borislav Petkov (AMD)
• [tip: sched/urgent] sched/fair: Fix tg->load when offlining a CPU, tip-bot2 for Vincent Guittot
  • <Possible follow-ups>
  • [tip: sched/urgent] sched/fair: Fix tg->load when offlining a CPU, tip-bot2 for Vincent Guittot
• [tip: sched/core] sched/topology: Add a new arch_scale_freq_ref() method, tip-bot2 for Vincent Guittot
• [tip: sched/core] cpufreq: Use the fixed and coherent frequency for scaling capacity, tip-bot2 for Vincent Guittot
• [tip: sched/core] cpufreq/cppc: Move and rename cppc_cpufreq_{perf_to_khz|khz_to_perf}(), tip-bot2 for Vincent Guittot
• [tip: sched/core] energy_model: Use a fixed reference frequency, tip-bot2 for Vincent Guittot
• [tip: sched/core] cpufreq/schedutil: Use a fixed reference frequency, tip-bot2 for Vincent Guittot
• [tip: sched/core] arm64/amu: Use capacity_ref_freq() to set AMU ratio, tip-bot2 for Vincent Guittot
• [tip: sched/core] cpufreq/cppc: Set the frequency used for computing the capacity, tip-bot2 for Vincent Guittot
• [tip: sched/core] sched/fair: Remove SCHED_FEAT(UTIL_EST_FASTUP, true), tip-bot2 for Vincent Guittot
• [tip: sched/core] sched/fair: Simplify util_est, tip-bot2 for Vincent Guittot
• [tip: sched/core] sched/fair: Remove unused 'next_buddy_marked' local variable in check_preempt_wakeup_fair(), tip-bot2 for Wang Jinchao
• [tip: sched/core] sched/fair: Use all little CPUs for CPU-bound workloads, tip-bot2 for Pierre Gondois
• [tip: core/entry] entry: Move exit to usermode functions to header file, tip-bot2 for Sven Schnelle
• [tip: core/entry] entry: Move enter_from_user_mode() to header file, tip-bot2 for Sven Schnelle
• [tip: core/entry] entry: Move syscall_enter_from_user_mode() to header file, tip-bot2 for Sven Schnelle
• [tip: x86/boot] x86/boot: Remove redundant initialization of the 'delta' variable in strcmp(), tip-bot2 for Colin Ian King
• [tip: timers/core] tick-sched: Fix function names in comments, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] tick/sched: Cleanup confusing variables, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] tracing/timers: Enhance timer_start tracepoint, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] tick-sched: Warn when next tick seems to be in the past, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] tracing/timers: Add tracepoint for tracking timer base is_idle flag, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Do not IPI for deferrable timers, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Move store of next event into __next_timer_interrupt(), tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Clarify check in forward_timer_base(), tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Split out forward timer base functionality, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Use already existing function for forwarding timer base, tip-bot2 for Anna-Maria Behnsen
• [tip: timers/core] timers: Rework idle logic, tip-bot2 for Thomas Gleixner
• [tip: timers/core] timers: Fix nextevt calculation when no timers are pending, tip-bot2 for Anna-Maria Behnsen
• [tip: smp/core] cpu/hotplug: Increase the number of dynamic states, tip-bot2 for xiaoming Wang
• [tip: sched/core] sched/fair: Use existing helper functions to access ->avg_rt and ->avg_dl, tip-bot2 for Shrikanth Hegde
  • <Possible follow-ups>
  • [tip: sched/core] sched/fair: Use existing helper functions to access ->avg_rt and ->avg_dl, tip-bot2 for Shrikanth Hegde
• [tip: x86/asm] x86/asm: Provide new infrastructure for GDT descriptors, tip-bot2 for Vegard Nossum
• [tip: x86/asm] x86/asm: Replace magic numbers in GDT descriptors, preparations, tip-bot2 for Vegard Nossum
• [tip: x86/asm] x86/asm: Replace magic numbers in GDT descriptors, script-generated change, tip-bot2 for Vegard Nossum
• [tip: x86/asm] x86/asm: Always set A (accessed) flag in GDT descriptors, tip-bot2 for Vegard Nossum
• [tip: x86/asm] x86/asm: Add DB flag to 32-bit percpu GDT entry, tip-bot2 for Vegard Nossum
• [tip: x86/percpu] x86/alternatives: Move apply_relocation() out of init section, tip-bot2 for Arnd Bergmann
• [tip: x86/build] x86/Kconfig: Rework CONFIG_X86_PAE dependency, tip-bot2 for Arnd Bergmann
• [tip: x86/urgent] x86/smpboot/64: Handle X2APIC BIOS inconsistency gracefully, tip-bot2 for Thomas Gleixner
• [tip: x86/urgent] x86/alternatives: Sync core before enabling interrupts, tip-bot2 for Thomas Gleixner
• [tip: x86/urgent] x86/alternatives: Disable interrupts and sync when optimizing NOPs in place, tip-bot2 for Thomas Gleixner
• [tip: x86/mm] x86/percpu: Use %RIP-relative address in untagged_addr(), tip-bot2 for Uros Bizjak
• [tip: ras/core] x86/mce: Remove old CMCI storm mitigation code, tip-bot2 for Tony Luck
• [tip: ras/core] x86/mce: Add per-bank CMCI storm mitigation, tip-bot2 for Tony Luck
• [tip: ras/core] x86/mce: Handle Intel threshold interrupt storms, tip-bot2 for Tony Luck
  • RE: [tip: ras/core] x86/mce: Handle Intel threshold interrupt storms, Luck, Tony
    • Re: [tip: ras/core] x86/mce: Handle Intel threshold interrupt storms, Borislav Petkov
• [tip: perf/urgent] perf: Fix perf_event_validate_size() lockdep splat, tip-bot2 for Mark Rutland
  • Re: [tip: perf/urgent] perf: Fix perf_event_validate_size() lockdep splat, Pengfei Xu
• [tip: x86/tdx] x86/virt/tdx: Make TDX host depend on X86_MCE, tip-bot2 for Kai Huang
• [tip: x86/paravirt] x86/paravirt: Remove no longer needed paravirt patching code, tip-bot2 for Juergen Gross
• [tip: x86/paravirt] x86/paravirt: Move some functions and defines to alternative.c, tip-bot2 for Juergen Gross
• [tip: x86/paravirt] x86/paravirt: Introduce ALT_NOT_XEN, tip-bot2 for Juergen Gross
• [tip: x86/paravirt] x86/paravirt: Switch mixed paravirt/alternative calls to alternatives, tip-bot2 for Juergen Gross
• [tip: x86/paravirt] x86/alternative: Add indirect call patching, tip-bot2 for Juergen Gross
• [tip: x86/sev] x86/sev: Do the C-bit verification only on the BSP, tip-bot2 for Borislav Petkov (AMD)
• [tip: x86/cleanups] x86/head_64: Use TESTB instead of TESTL in secondary_startup_64_no_verify(), tip-bot2 for Uros Bizjak
• [tip: x86/tdx] x86/cpu: Detect TDX partial write machine check erratum, tip-bot2 for Kai Huang
• [tip: irq/core] irqchip/irq-xtensa-pic: Clean up, tip-bot2 for Max Filippov
• [tip: x86/cleanups] x86/docs: Remove reference to syscall trampoline in PTI, tip-bot2 for Nikolay Borisov
• [tip: x86/cpu] x86/CPU/AMD: Add X86_FEATURE_ZEN1, tip-bot2 for Borislav Petkov (AMD)
• [tip: x86/percpu] x86/traps: Use current_top_of_stack() helper in traps.c, tip-bot2 for Uros Bizjak
• [tip: x86/percpu] x86/percpu: Fix "const_pcpu_hot" version generation failure, tip-bot2 for Uros Bizjak
• [tip: x86/percpu] x86/percpu: Avoid sparse warning with cast to named address space, tip-bot2 for Uros Bizjak
• [tip: x86/misc] x86/ia32: State that IA32 emulation is disabled, tip-bot2 for Borislav Petkov (AMD)
• [tip: x86/misc] Documentation/x86: Document what /proc/cpuinfo is for, tip-bot2 for Borislav Petkov (AMD)
• [tip: irq/core] irqchip/renesas-rzg2l: Add macro to retrieve TITSR register offset based on register's index, tip-bot2 for Claudiu Beznea
  • <Possible follow-ups>
  • [tip: irq/core] irqchip/renesas-rzg2l: Add macro to retrieve TITSR register offset based on register's index, tip-bot2 for Claudiu Beznea
• [tip: irq/core] irqchip/renesas-rzg2l: Align struct member names to tabs, tip-bot2 for Claudiu Beznea
  • <Possible follow-ups>
  • [tip: irq/core] irqchip/renesas-rzg2l: Align struct member names to tabs, tip-bot2 for Claudiu Beznea
• [tip: irq/core] irqchip/renesas-rzg2l: Use tabs instead of spaces, tip-bot2 for Claudiu Beznea
  • <Possible follow-ups>
  • [tip: irq/core] irqchip/renesas-rzg2l: Use tabs instead of spaces, tip-bot2 for Claudiu Beznea
• [tip: irq/core] irqchip/renesas-rzg2l: Implement restriction when writing ISCR register, tip-bot2 for Claudiu Beznea
  • <Possible follow-ups>
  • [tip: irq/core] irqchip/renesas-rzg2l: Implement restriction when writing ISCR register, tip-bot2 for Claudiu Beznea
• [tip: irq/core] clk: renesas: r9a08g045: Add IA55 pclk and its reset, tip-bot2 for Claudiu Beznea
  • Re: [tip: irq/core] clk: renesas: r9a08g045: Add IA55 pclk and its reset, Geert Uytterhoeven
• [tip: irq/core] irqchip/renesas-rzg2l: Document structure members, tip-bot2 for Claudiu Beznea
  • <Possible follow-ups>
  • [tip: irq/core] irqchip/renesas-rzg2l: Document structure members, tip-bot2 for Claudiu Beznea
• [tip: irq/core] irqchip/renesas-rzg2l: Add support for suspend to RAM, tip-bot2 for Claudiu Beznea
  • <Possible follow-ups>
  • [tip: irq/core] irqchip/renesas-rzg2l: Add support for suspend to RAM, tip-bot2 for Claudiu Beznea
• [tip: irq/core] dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G3S, tip-bot2 for Claudiu Beznea
  • <Possible follow-ups>
  • [tip: irq/core] dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G3S, tip-bot2 for Claudiu Beznea
• [tip: irq/core] arm64: dts: renesas: r9108g045: Add IA55 interrupt controller node, tip-bot2 for Claudiu Beznea
  • Re: [tip: irq/core] arm64: dts: renesas: r9108g045: Add IA55 interrupt controller node, Geert Uytterhoeven
    • Re: [tip: irq/core] arm64: dts: renesas: r9108g045: Add IA55 interrupt controller node, Thomas Gleixner
• [tip: irq/core] irqchip/qcom-mpm: Support passing a slice of SRAM as reg space, tip-bot2 for Konrad Dybcio
  • <Possible follow-ups>
  • [tip: irq/core] irqchip/qcom-mpm: Support passing a slice of SRAM as reg space, tip-bot2 for Konrad Dybcio
• [tip: irq/core] dt-bindings: interrupt-controller: mpm: Pass MSG RAM slice through phandle, tip-bot2 for Konrad Dybcio
  • <Possible follow-ups>
  • [tip: irq/core] dt-bindings: interrupt-controller: mpm: Pass MSG RAM slice through phandle, tip-bot2 for Konrad Dybcio
• [tip: x86/tdx] Documentation/x86: Add documentation for TDX host support, tip-bot2 for Kai Huang
  • <Possible follow-ups>
  • [tip: x86/tdx] Documentation/x86: Add documentation for TDX host support, tip-bot2 for Kai Huang
• [tip: x86/tdx] x86/virt/tdx: Disable TDX host support when kexec is enabled, tip-bot2 for Dave Hansen
  • <Possible follow-ups>
  • [tip: x86/tdx] x86/virt/tdx: Disable TDX host support when kexec is enabled, tip-bot2 for Dave Hansen
• [tip: x86/sgx] selftests/sgx: Skip non X86_64 platform, tip-bot2 for Zhao Mengmeng
• [tip: x86/sgx] selftests/sgx: Fix uninitialized pointer dereferences in encl_get_entry, tip-bot2 for Jo Van Bulck
• [tip: x86/sgx] selftests/sgx: Separate linker options, tip-bot2 for Jo Van Bulck
• [tip: x86/sgx] selftests/sgx: Include memory clobber for inline asm in test enclave, tip-bot2 for Jo Van Bulck
• [tip: x86/sgx] selftests/sgx: Fix uninitialized pointer dereference in error path, tip-bot2 for Jo Van Bulck
• [tip: x86/sgx] selftests/sgx: Specify freestanding environment for enclave compilation, tip-bot2 for Jo Van Bulck
• [tip: x86/sgx] selftests/sgx: Handle relocations in test enclave, tip-bot2 for Jo Van Bulck
• [tip: x86/sgx] selftests/sgx: Fix linker script asserts, tip-bot2 for Jo Van Bulck
• [tip: x86/sgx] selftests/sgx: Remove redundant enclave base address save/restore, tip-bot2 for Jo Van Bulck
• [tip: x86/sgx] selftests/sgx: Ensure expected location of test enclave buffer, tip-bot2 for Jo Van Bulck
• [tip: x86/sgx] selftests/sgx: Produce static-pie executable for test enclave, tip-bot2 for Jo Van Bulck
• [tip: x86/sgx] selftests/sgx: Discard unsupported ELF sections, tip-bot2 for Jo Van Bulck
• [tip: x86/sgx] selftests/sgx: Ensure test enclave buffer is entirely preserved, tip-bot2 for Jo Van Bulck
• [tip: x86/sgx] selftests/sgx: Remove incomplete ABI sanitization code in test enclave, tip-bot2 for Jo Van Bulck
• [tip: x86/tdx] x86/virt/tdx: Detect TDX during kernel boot, tip-bot2 for Kai Huang
• [tip: x86/tdx] x86/virt/tdx: Add skeleton to enable TDX on demand, tip-bot2 for Kai Huang
• [tip: x86/tdx] x86/virt/tdx: Define TDX supported page sizes as macros, tip-bot2 for Kai Huang
• [tip: x86/tdx] x86/virt/tdx: Make INTEL_TDX_HOST depend on X86_X2APIC, tip-bot2 for Kai Huang
• [tip: x86/tdx] x86/virt/tdx: Add SEAMCALL error printing for module initialization, tip-bot2 for Kai Huang
• [tip: x86/tdx] x86/virt/tdx: Use all system memory when initializing TDX module as TDX memory, tip-bot2 for Kai Huang
• [tip: x86/tdx] x86/virt/tdx: Get module global metadata for module initialization, tip-bot2 for Kai Huang
• [tip: x86/tdx] x86/virt/tdx: Add placeholder to construct TDMRs to cover all TDX memory regions, tip-bot2 for Kai Huang
• [tip: x86/tdx] x86/virt/tdx: Handle SEAMCALL no entropy error in common code, tip-bot2 for Kai Huang