Linux SCSI

• Thread Index

• Re: [PATCH V8 2/5] scsi: ufs: qcom: Add multiple frequency support for MAX_CORE_CLK_1US_CYCLES
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH V8 2/5] scsi: ufs: qcom: Add multiple frequency support for MAX_CORE_CLK_1US_CYCLES
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 10/13] scsi: fnic: Add support for multiqueue (MQ) in fnic_main.c
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• [Bug 85101] hpsa + P410 does not show connected HP SAS port expanders
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 198923] Linux 4.15.4+: Write on Ext4 causes system block
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v2 6/7] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v2 6/7] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v2 5/7] scsi: ufs: ufs-qcom: Set initial PHY gear to max HS gear for HW ver 5 and newer
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v2 4/7] scsi: ufs: ufs-qcom: Limit HS-G5 Rate-A to hosts with HW version 5
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v2 3/7] scsi: ufs: ufs-qcom: Allow the first init start with the maximum supported gear
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v2 3/7] scsi: ufs: ufs-qcom: Allow the first init start with the maximum supported gear
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v2 0/7] Enable HS-G5 support on SM8550
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v2 2/7] scsi: ufs: ufs-qcom: Setup host power mode during init
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v2 2/7] scsi: ufs: ufs-qcom: Setup host power mode during init
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v2 1/7] scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v2 1/7] scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH 1/1] scsi: sd: Fix sshdr use in sd_suspend_common
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [bug report] scsi: lpfc: Add EDC ELS support
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 6/7] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 6/7] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v2 5/7] scsi: ufs: ufs-qcom: Set initial PHY gear to max HS gear for HW ver 5 and newer
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v2 4/7] scsi: ufs: ufs-qcom: Limit HS-G5 Rate-A to hosts with HW version 5
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v2 3/7] scsi: ufs: ufs-qcom: Allow the first init start with the maximum supported gear
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v2 0/7] Enable HS-G5 support on SM8550
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v2 2/7] scsi: ufs: ufs-qcom: Setup host power mode during init
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v2 1/7] scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 2/7] scsi: ufs: ufs-qcom: Setup host power mode during init
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• RE: [PATCH v2 03/13] scsi: fnic: Add and improve log messages
  • From: "Karan Tilak Kumar (kartilak)" <kartilak@xxxxxxxxx>
• Re: [PATCH v2 1/7] scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• RE: [PATCH v2 13/13] scsi: fnic: Improve logs and add support for multiqueue (MQ)
  • From: "Karan Tilak Kumar (kartilak)" <kartilak@xxxxxxxxx>
• Re: [bug report] scsi: lpfc: Add EDC ELS support
  • From: Justin Tee <justintee8345@xxxxxxxxx>
• [PATCH AUTOSEL 5.15 04/22] scsi: hisi_sas: Set debugfs_dir pointer to NULL after removing debugfs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 10/11] scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 9/9] scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 11/12] scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 13/16] scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 20/30] scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 07/30] scsi: hisi_sas: Set debugfs_dir pointer to NULL after removing debugfs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 08/30] scsi: ibmvfc: Remove BUG_ON in the case of an empty event pool
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 15/22] scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 05/22] scsi: ibmvfc: Remove BUG_ON in the case of an empty event pool
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.5 22/34] scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.5 09/34] scsi: ibmvfc: Remove BUG_ON in the case of an empty event pool
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.5 08/34] scsi: hisi_sas: Set debugfs_dir pointer to NULL after removing debugfs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 24/36] scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 11/36] scsi: ibmvfc: Remove BUG_ON in the case of an empty event pool
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 10/36] scsi: hisi_sas: Set debugfs_dir pointer to NULL after removing debugfs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [bug report] scsi: lpfc: Add EDC ELS support
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 6/7] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 13/13] scsi: fnic: Improve logs and add support for multiqueue (MQ)
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 03/13] scsi: fnic: Add and improve log messages
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH v2 1/7] scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params
  • From: Can Guo <cang@xxxxxxxxxxxxxxxx>
• [PATCH v2 7/7] scsi: ufs: ufs-qcom: Add support for UFS device version detection
  • From: Can Guo <cang@xxxxxxxxxxxxxxxx>
• [PATCH v2 6/7] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550
  • From: Can Guo <cang@xxxxxxxxxxxxxxxx>
• [PATCH v2 5/7] scsi: ufs: ufs-qcom: Set initial PHY gear to max HS gear for HW ver 5 and newer
  • From: Can Guo <cang@xxxxxxxxxxxxxxxx>
• [PATCH v2 2/7] scsi: ufs: ufs-qcom: Setup host power mode during init
  • From: Can Guo <cang@xxxxxxxxxxxxxxxx>
• [PATCH v2 4/7] scsi: ufs: ufs-qcom: Limit HS-G5 Rate-A to hosts with HW version 5
  • From: Can Guo <cang@xxxxxxxxxxxxxxxx>
• [PATCH v2 3/7] scsi: ufs: ufs-qcom: Allow the first init start with the maximum supported gear
  • From: Can Guo <cang@xxxxxxxxxxxxxxxx>
• [PATCH v2 0/7] Enable HS-G5 support on SM8550
  • From: Can Guo <cang@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] scsi: scsi_debug: delete some bogus error checking
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• Re: [PATCH v2 1/2] scsi: scsi_debug: scsi: scsi_debug: fix some bugs in sdebug_error_write()
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [PATCH 0/1] scsi: Fix sshdr use wrap up
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH 1/1] scsi: sd: Fix sshdr use in sd_suspend_common
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• Re: [PATCH v2] scsi: mvsas: Try to enable MSI
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v17 12/12] null_blk: add support for copy offload
  • From: kernel test robot <lkp@xxxxxxxxx>
• RE: [PATCH v2 13/13] scsi: fnic: Improve logs and add support for multiqueue (MQ)
  • From: "Karan Tilak Kumar (kartilak)" <kartilak@xxxxxxxxx>
• RE: [PATCH v2 13/13] scsi: fnic: Improve logs and add support for multiqueue (MQ)
  • From: "Karan Tilak Kumar (kartilak)" <kartilak@xxxxxxxxx>
• RE: [PATCH v2 12/13] scsi: fnic: Add support for multiqueue (MQ) in fnic driver
  • From: "Karan Tilak Kumar (kartilak)" <kartilak@xxxxxxxxx>
• RE: [PATCH v2 09/13] scsi: fnic: Remove usage of host_lock
  • From: "Karan Tilak Kumar (kartilak)" <kartilak@xxxxxxxxx>
• RE: [PATCH v2 07/13] scsi: fnic: Modify ISRs to support multiqueue(MQ)
  • From: "Karan Tilak Kumar (kartilak)" <kartilak@xxxxxxxxx>
• RE: [PATCH v2 06/13] scsi: fnic: Refactor and redefine fnic.h for multiqueue
  • From: "Karan Tilak Kumar (kartilak)" <kartilak@xxxxxxxxx>
• RE: [PATCH v2 05/13] scsi: fnic: Get copy workqueue count and interrupt mode from config
  • From: "Karan Tilak Kumar (kartilak)" <kartilak@xxxxxxxxx>
• RE: [PATCH v2 04/13] scsi: fnic: Rename wq_copy to hw_copy_wq
  • From: "Karan Tilak Kumar (kartilak)" <kartilak@xxxxxxxxx>
• RE: [PATCH v2 03/13] scsi: fnic: Add and improve log messages
  • From: "Karan Tilak Kumar (kartilak)" <kartilak@xxxxxxxxx>
• RE: [PATCH v2 02/13] scsi: fnic: Add and use fnic number
  • From: "Karan Tilak Kumar (kartilak)" <kartilak@xxxxxxxxx>
• RE: [PATCH v2 01/13] scsi: fnic: Modify definitions to sync with VIC firmware
  • From: "Karan Tilak Kumar (kartilak)" <kartilak@xxxxxxxxx>
• RE: [PATCH v2 00/13] Introduce support for multiqueue (MQ) in fnic
  • From: "Karan Tilak Kumar (kartilak)" <kartilak@xxxxxxxxx>
• RE: [PATCH 13/16] fnic: allocate device reset command on the fly
  • From: "Karan Tilak Kumar (kartilak)" <kartilak@xxxxxxxxx>
• Re: [PATCH v2] ufs: core: fix racing issue between ufshcd_mcq_abort and ISR
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] dt-bindings: ufs: Add msi-parent for UFS MCQ
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] dt-bindings: ufs: Add msi-parent for UFS MCQ
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] scsi: mvsas: Try to enable MSI
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• [PATCH v2 2/2] scsi: scsi_debug: delete some bogus error checking
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v2 1/2] scsi: scsi_debug: scsi: scsi_debug: fix some bugs in sdebug_error_write()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 1/2] scsi: scsi_debug: fix some bugs in sdebug_error_write()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2] scsi: mvsas: Try to enable MSI
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2] scsi: mvsas: Try to enable MSI
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• [PATCH v2] ufs: core: fix racing issue between ufshcd_mcq_abort and ISR
  • From: <peter.wang@xxxxxxxxxxxx>
• RE: [PATCH v4] scsi: ufs: ufs-sysfs: Expose UFS power info
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH v1] ufs: core: fix racing issue between ufshcd_mcq_abort and ISR
  • From: Peter Wang (王信友) <peter.wang@xxxxxxxxxxxx>
• RE: [PATCH v1] scsi: ufs: core: Process abort completed command in MCQ mode
  • From: "hoyoung seo" <hy50.seo@xxxxxxxxxxx>
• [PATCH v2] scsi: mvsas: Try to enable MSI
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v6] usb-storage,uas: use host helper to generate driver info
  • From: Milan Broz <gmazyland@xxxxxxxxx>
• Re: [PATCH v5] usb-storage,uas: use host helper to generate driver info
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5] usb-storage,uas: use host helper to generate driver info
  • From: Milan Broz <gmazyland@xxxxxxxxx>
• Re: [PATCH v5] usb-storage,uas: use host helper to generate driver info
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v5] usb-storage,uas: use host helper to generate driver info
  • From: Milan Broz <gmazyland@xxxxxxxxx>
• Re: [PATCH 1/2] scsi: scsi_debug: fix some bugs in sdebug_error_write()
  • From: Wenchao Hao <haowenchao22@xxxxxxxxx>
• Re: [PATCH 1/2] scsi: scsi_debug: fix some bugs in sdebug_error_write()
  • From: Wenchao Hao <haowenchao22@xxxxxxxxx>
• Re: [PATCH v1] ufs: core: fix racing issue between ufshcd_mcq_abort and ISR
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3 1/1] ufs: core: Expand MCQ queue slot to DeviceQueueDepth + 1
  • From: Chun-Hung Wu (巫駿宏) <Chun-hung.Wu@xxxxxxxxxxxx>
• Re: [PATCH v1] ufs: core: fix racing issue between ufshcd_mcq_abort and ISR
  • From: Peter Wang (王信友) <peter.wang@xxxxxxxxxxxx>
• Re: [PATCH v3 1/1] ufs: core: Expand MCQ queue slot to DeviceQueueDepth + 1
  • From: Peter Wang (王信友) <peter.wang@xxxxxxxxxxxx>
• Re: [GIT PULL] first round of SCSI updates for the 6.4+ merge window
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH] scsi: libfc: replace deprecated strncpy with memcpy
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1] scsi: ufs: core: Process abort completed command in MCQ mode
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3 1/1] ufs: core: Expand MCQ queue slot to DeviceQueueDepth + 1
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3 1/1] ufs: core: Expand MCQ queue slot to DeviceQueueDepth + 1
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3 1/1] ufs: core: Expand MCQ queue slot to DeviceQueueDepth + 1
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH 0/9] lpfc: Update lpfc to revision 14.2.0.16
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH] scsi: libfc: replace deprecated strncpy with memcpy
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 1/1] ufs: core: Expand MCQ queue slot to DeviceQueueDepth + 1
  • From: Stanley Chu <chu.stanley@xxxxxxxxx>
• [GIT PULL] first round of SCSI updates for the 6.4+ merge window
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/13] Introduce support for multiqueue (MQ) in fnic
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH v2 13/13] scsi: fnic: Improve logs and add support for multiqueue (MQ)
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 12/13] scsi: fnic: Add support for multiqueue (MQ) in fnic driver
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 11/13] scsi: fnic: Use fnic_lock to protect fnic structures in queuecommand
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH] scsi: ufs: core: Add compl_time_stamp_local_clock assignment
  • From: Zhe Wang <zhewang116@xxxxxxxxx>
• Re: [PATCH v2 13/13] scsi: fnic: Improve logs and add support for multiqueue (MQ)
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 10/13] scsi: fnic: Add support for multiqueue (MQ) in fnic_main.c
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 09/13] scsi: fnic: Remove usage of host_lock
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 08/13] scsi: fnic: Define stats to track multiqueue (MQ) IOs
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 07/13] scsi: fnic: Modify ISRs to support multiqueue(MQ)
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 06/13] scsi: fnic: Refactor and redefine fnic.h for multiqueue
  • From: Hannes Reinecke <hare@xxxxxxx>
• RE:(2) (2) [PATCH v3 01/14] fs: Move enum rw_hint into a new header file
  • From: Daejun Park <daejun7.park@xxxxxxxxxxx>
• Re: [PATCH v2 05/13] scsi: fnic: Get copy workqueue count and interrupt mode from config
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 04/13] scsi: fnic: Rename wq_copy to hw_copy_wq
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 03/13] scsi: fnic: Add and improve log messages
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 02/13] scsi: fnic: Add and use fnic number
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 01/13] scsi: fnic: Modify definitions to sync with VIC firmware
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH v3 1/1] ufs: core: Expand MCQ queue slot to DeviceQueueDepth + 1
  • From: <naomi.chu@xxxxxxxxxxxx>
• [PATCH v3 0/1] ufs: core: Expand MCQ queue slot to DeviceQueueDepth + 1
  • From: <naomi.chu@xxxxxxxxxxxx>
• RE: [PATCH v1] scsi: ufs: core: Process abort completed command in MCQ mode
  • From: "hoyoung seo" <hy50.seo@xxxxxxxxxxx>
• [PATCH v4] scsi: ufs: ufs-sysfs: Expose UFS power info
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v3] scsi: ufs: ufs-sysfs: Expose UFS power info
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v3] scsi: ufs: ufs-sysfs: Expose UFS power info
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v3] scsi: ufs: ufs-sysfs: Expose UFS power info
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3] scsi: ufs: ufs-sysfs: Expose UFS power info
  • From: Bean Huo <huobean@xxxxxxxxx>
• Re: (2) [PATCH v3 01/14] fs: Move enum rw_hint into a new header file
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] scsi: ufs: core: Add compl_time_stamp_local_clock assignment
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 1/1] ufs: core: Expand MCQ queue slot to DeviceQueueDepth + 1
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v1] scsi: ufs: core: Process abort completed command in MCQ mode
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: blktests failures with v6.6
  • From: Shinichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
• [PATCH] dt-bindings: ufs: Add msi-parent for UFS MCQ
  • From: Ziqi Chen <quic_ziqichen@xxxxxxxxxxx>
• Re: blktests failures with v6.6
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH v1] scsi: ufs: core: Process abort completed command in MCQ mode
  • From: SEO HOYOUNG <hy50.seo@xxxxxxxxxxx>
• [PATCH v2 1/1] ufs: core: Expand MCQ queue slot to DeviceQueueDepth + 1
  • From: <naomi.chu@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: ufs: qcom: Add msi-parent for UFS MCQ
  • From: Ziqi Chen <quic_ziqichen@xxxxxxxxxxx>
• [PATCH] scsi: ufs: core: Add compl_time_stamp_local_clock assignment
  • From: Zhe Wang <zhe.wang1@xxxxxxxxxx>
• RE:(2) [PATCH v3 01/14] fs: Move enum rw_hint into a new header file
  • From: Daejun Park <daejun7.park@xxxxxxxxxxx>
• Re: [PATCH v3] scsi: ufs: ufs-sysfs: Expose UFS power info
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: ufs: qcom: Add msi-parent for UFS MCQ
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• blktests failures with v6.6
  • From: Shinichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
• [PATCH] dt-bindings: ufs: qcom: Add msi-parent for UFS MCQ
  • From: Ziqi Chen <quic_ziqichen@xxxxxxxxxxx>
• [PATCH v3] scsi: ufs: ufs-sysfs: Expose UFS power info
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v2] scsi: ufs: ufs-sysfs: Expose UFS power info
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH 7/9] lpfc: Enhance driver logging for selected discovery events
  • From: Justin Tee <justintee8345@xxxxxxxxx>
• [PATCH 8/9] lpfc: Update lpfc version to 14.2.0.16
  • From: Justin Tee <justintee8345@xxxxxxxxx>
• [PATCH 9/9] lpfc: Copyright updates for 14.2.0.16 patches
  • From: Justin Tee <justintee8345@xxxxxxxxx>
• [PATCH 4/9] lpfc: Eliminate unnecessary relocking in lpfc_check_nlp_post_devloss
  • From: Justin Tee <justintee8345@xxxxxxxxx>
• [PATCH 6/9] lpfc: Refactor and clean up mailbox command memory free
  • From: Justin Tee <justintee8345@xxxxxxxxx>
• [PATCH 5/9] lpfc: Return early in lpfc_poll_eratt when the driver is unloading
  • From: Justin Tee <justintee8345@xxxxxxxxx>
• [PATCH 3/9] lpfc: Fix list_entry null check warning in lpfc_cmpl_els_plogi
  • From: Justin Tee <justintee8345@xxxxxxxxx>
• [PATCH 2/9] lpfc: Fix possible file string name overflow when updating firmware
  • From: Justin Tee <justintee8345@xxxxxxxxx>
• [PATCH 1/9] lpfc: Correct maximum PCI function value for RAS fw logging
  • From: Justin Tee <justintee8345@xxxxxxxxx>
• [PATCH 0/9] lpfc: Update lpfc to revision 14.2.0.16
  • From: Justin Tee <justintee8345@xxxxxxxxx>
• Re: [PATCH v4 0/3] Support disabling fair tag sharing
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2] scsi: ufs: ufs-sysfs: Expose UFS power info
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 1/6] scsi: ufs: ufs-qcom: Setup host power mode during init
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• [PATCH v2] scsi: ufs: ufs-sysfs: Expose UFS power info
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH 2/6] scsi: ufs: ufs-qcom: Add support for UFS device version detection
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH 5/6] scsi: ufs: ufs-sysfs: Expose UFS power info
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH 2/6] scsi: ufs: ufs-qcom: Add support for UFS device version detection
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH 6/6] scsi: ufs: ufs-sysfs: Introduce UFS power info sysfs nodes
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH 5/6] scsi: ufs: ufs-sysfs: Expose UFS power info
  • From: Can Guo <quic_cang@xxxxxxxxxxx>
• Re: [PATCH v4 0/3] Support disabling fair tag sharing
  • From: Yu Kuai <yukuai1@xxxxxxxxxxxxxxx>
• [PATCH] scsi: libfc: replace deprecated strncpy with memcpy
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• [PATCH] scsi: ibmvscsi_tgt: replace deprecated strncpy with strscpy
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• [PATCH] scsi: ibmvscsi: replace deprecated strncpy with strscpy
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• [PATCH] scsi: ibmvfc: replace deprecated strncpy with strscpy
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• Re: [PATCH v4] usb-storage,uas: use host helper to generate driver info
  • From: Milan Broz <gmazyland@xxxxxxxxx>
• Re: [PATCH v4] usb-storage,uas: use host helper to generate driver info
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: ufs: qcom-ufs: document the SM8650 UFS Controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 01/14] fs: Move enum rw_hint into a new header file
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH -next] scsi: pmcraid: Fix some kernel-doc comments
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] pmcraid: add missing scsi_device_put() in pmcraid_eh_target_reset_handler()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: target: core: Fix one kernel-doc comment
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 0/2] cleanup patch
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] aic79xx: fix up NULL command in ahd_done()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] scsi: snici: remove useless code in snic_dr_clean_pending_req
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] mptfc: initialize return value in mptfc_bus_reset()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] megaraid: fixup debug message in megaraid_abort_and_reset()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] mpt3sas: Improvised loop logic
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: sr: Fix a potential uninit-value in sr_get_events()
  • From: michael.christie@xxxxxxxxxx
• Re: [PATCH v3 01/14] fs: Move enum rw_hint into a new header file
  • From: Kanchan Joshi <joshi.k@xxxxxxxxxxx>
• [PATCH v3] dt-bindings: ufs: qcom-ufs: document the SM8650 UFS Controller
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2] scsi: message: fusion: Fix a possible data race in mpt_ioc_reset()
  • From: Tuo Li <islituo@xxxxxxxxx>
• Re: [PATCH] scsi: sr: Fix a potential uninit-value in sr_get_events()
  • From: Shigeru Yoshida <syoshida@xxxxxxxxxx>
• [PATCH] qla2xxx: fix system crash due to bad pointer access
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• Re: [PATCH v1 1/1] ufs: core: Add host quirk QUIRK_MCQ_EXPAND_QUEUE_SLOT
  • From: Chun-Hung Wu (巫駿宏) <Chun-hung.Wu@xxxxxxxxxxxx>
• [PATCH AUTOSEL 4.14 10/11] scsi: mpt3sas: Fix in error path
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 12/16] scsi: mpt3sas: Fix in error path
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 27/39] scsi: mpt3sas: Fix in error path
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 23/28] scsi: mpt3sas: Fix in error path
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 10/12] scsi: mpt3sas: Fix in error path
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 11/13] scsi: mpt3sas: Fix in error path
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.5 36/52] scsi: mpt3sas: Fix in error path
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v2 12/13] scsi: fnic: Add support for multiqueue (MQ) in fnic driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 00/12] scsi: mpt3sas: Use flexible arrays and do a few cleanups
  • From: James Seo <james@xxxxxxxxxx>
• [PATCH v4] usb-storage,uas: use host helper to generate driver info
  • From: Milan Broz <gmazyland@xxxxxxxxx>
• Re: [PATCH] scsi: libsas: fix set zero-address when device-type != NO_DEVICE
  • From: yangxingui <yangxingui@xxxxxxxxxx>
• Re: [PATCH v1 1/1] ufs: core: Add host quirk QUIRK_MCQ_EXPAND_QUEUE_SLOT
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2] scsi: hpsa: replace deprecated strncpy
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• [PATCH v2 05/13] scsi: fnic: Get copy workqueue count and interrupt mode from config
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH v2 12/13] scsi: fnic: Add support for multiqueue (MQ) in fnic driver
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH v2 13/13] scsi: fnic: Improve logs and add support for multiqueue (MQ)
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH v2 10/13] scsi: fnic: Add support for multiqueue (MQ) in fnic_main.c
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH v2 09/13] scsi: fnic: Remove usage of host_lock
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH v2 08/13] scsi: fnic: Define stats to track multiqueue (MQ) IOs
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH v2 11/13] scsi: fnic: Use fnic_lock to protect fnic structures in queuecommand
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH v2 07/13] scsi: fnic: Modify ISRs to support multiqueue(MQ)
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH v2 06/13] scsi: fnic: Refactor and redefine fnic.h for multiqueue
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH v2 04/13] scsi: fnic: Rename wq_copy to hw_copy_wq
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH v2 03/13] scsi: fnic: Add and improve log messages
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH v2 02/13] scsi: fnic: Add and use fnic number
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH v2 01/13] scsi: fnic: Modify definitions to sync with VIC firmware
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH v2 00/13] Introduce support for multiqueue (MQ) in fnic
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• Re: [PATCH v2] scsi: hpsa: replace deprecated strncpy
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v3] usb-storage,uas: use host helper to generate driver info
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] scsi: ufs: ufs-qcom: Add support for UFS device version detection
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 2/6] scsi: ufs: ufs-qcom: Add support for UFS device version detection
  • From: Manivannan Sadhasivam <manivannanece23@xxxxxxxxx>
• [bug report] scsi: aic79xx: Fix up NULL command in ahd_done()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v1] ufs: core: fix racing issue between ufshcd_mcq_abort and ISR
  • From: <peter.wang@xxxxxxxxxxxx>
• Re: [PATCH 09/10] scsi_error: map FAST_IO_FAIL to -EAGAIN in SCSI EH
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v1 1/1] ufs: core: Add host quirk QUIRK_MCQ_EXPAND_QUEUE_SLOT
  • From: Chun-Hung Wu (巫駿宏) <Chun-hung.Wu@xxxxxxxxxxxx>
• Re: [PATCH] scsi: sd: Introduce manage_shutdown device flag
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: sd: Introduce manage_shutdown device flag
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] scsi: sd: Introduce manage_shutdown device flag
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2] scsi: hpsa: replace deprecated strncpy
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• Re: [PATCH] scsi: sd: Introduce manage_shutdown device flag
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi <phill@xxxxxxxxxxxx>
• Re: [PATCH 5/6] scsi: ufs: ufs-sysfs: Expose UFS power info
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 2/6] scsi: ufs: ufs-qcom: Add support for UFS device version detection
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2] scsi: elx: libefc: replace deprecated strncpy with strscpy_pad/memcpy
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH] scsi: hpsa: replace deprecated strncpy with strscpy/kmemdup_nul
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 09/10] scsi_error: map FAST_IO_FAIL to -EAGAIN in SCSI EH
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• Re: [PATCH v4 0/3] Support disabling fair tag sharing
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v4 0/3] Support disabling fair tag sharing
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 10/10] scsi: remove SUBMITTED_BY_SCSI_RESET_IOCTL
  • From: Benjamin Block <bblock@xxxxxxxxxxxxx>
• Re: Fwd: Marvell 88SE6320 SAS controller (mvsas) cannot survive ACPI S3 or ACPI S4
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• Re: [PATCH 09/10] scsi_error: map FAST_IO_FAIL to -EAGAIN in SCSI EH
  • From: Benjamin Block <bblock@xxxxxxxxxxxxx>
• Re: [PATCH 08/10] scsi_error: iterate over list of failed commands in scsi_eh_bus_device_reset()
  • From: Benjamin Block <bblock@xxxxxxxxxxxxx>
• [Bug 218030] Marvell 88SE6320 SAS controller (mvsas) cannot survive ACPI S3 or ACPI S4
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH 07/10] scsi: Do not allocate scsi command in scsi_ioctl_reset()
  • From: Benjamin Block <bblock@xxxxxxxxxxxxx>
• Re: [PATCH 06/10] scsi_error: iterate over list of failed commands in scsi_eh_bus_reset()
  • From: Benjamin Block <bblock@xxxxxxxxxxxxx>
• Re: [PATCH 05/10] scsi: set host byte after EH completed
  • From: Benjamin Block <bblock@xxxxxxxxxxxxx>
• Re: [PATCH 04/10] scsi: Use scsi_device as argument to eh_device_reset_handler()
  • From: Benjamin Block <bblock@xxxxxxxxxxxxx>
• Re: [PATCH 04/10] scsi: Use scsi_device as argument to eh_device_reset_handler()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 04/10] scsi: Use scsi_device as argument to eh_device_reset_handler()
  • From: Benjamin Block <bblock@xxxxxxxxxxxxx>
• Re: [PATCH] scsi: sd: Introduce manage_shutdown device flag
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• [Bug 218030] Marvell 88SE6320 SAS controller (mvsas) cannot survive ACPI S3 or ACPI S4
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH 3/7] usb-storage: use fflags index only in usb-storage driver
  • From: Milan Broz <gmazyland@xxxxxxxxx>
• Re: [PATCH 4/7] usb-storage,uas: use host helper to generate driver info
  • From: Milan Broz <gmazyland@xxxxxxxxx>
• [Bug 218030] Marvell 88SE6320 SAS controller (mvsas) cannot survive ACPI S3 or ACPI S4
  • From: bugzilla-daemon@xxxxxxxxxx
• [PATCH v3] usb-storage,uas: use host helper to generate driver info
  • From: Milan Broz <gmazyland@xxxxxxxxx>
• Re: [PATCH v3] scsi: sd: Introduce manage_shutdown device flag
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH v3] scsi: sd: Introduce manage_shutdown device flag
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v2] scsi: sd: Introduce manage_shutdown device flag
  • From: Niklas Cassel <Niklas.Cassel@xxxxxxx>
• Re: Fwd: Marvell 88SE6320 SAS controller (mvsas) cannot survive ACPI S3 or ACPI S4
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Fwd: Marvell 88SE6320 SAS controller (mvsas) cannot survive ACPI S3 or ACPI S4
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• [Bug 218030] Marvell 88SE6320 SAS controller (mvsas) cannot survive ACPI S3 or ACPI S4
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 217599] Adaptec 71605z hangs with aacraid: Host adapter abort request after update to linux 6.4.0
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH] drivers: target: Fixed multiple typos in multiple files
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH] drivers: target: Fixed multiple typos in multiple files
  • From: Muhammad Muzammil <m.muzzammilashraf@xxxxxxxxx>
• [PATCH v2] scsi: elx: libefc: replace deprecated strncpy with strscpy_pad/memcpy
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• [PATCH] scsi: hpsa: replace deprecated strncpy with strscpy/kmemdup_nul
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• Re: [PATCH v2] scsi: sd: Introduce manage_shutdown device flag
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v2] scsi: sd: Introduce manage_shutdown device flag
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v4 0/3] Support disabling fair tag sharing
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH v2 00/12] scsi: mpt3sas: Use flexible arrays and do a few cleanups
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH] scsi: sd: Introduce manage_shutdown device flag
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• RE: [PATCH 12/13] scsi: fnic: Add support for multiqueue (MQ) in fnic driver
  • From: "Karan Tilak Kumar (kartilak)" <kartilak@xxxxxxxxx>
• Re: [PATCH v14 10/19] scsi: core: Retry unaligned zoned writes
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v4 0/3] Support disabling fair tag sharing
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• RE: [PATCH v4 0/3] Support disabling fair tag sharing
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH 12/13] scsi: fnic: Add support for multiqueue (MQ) in fnic driver
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v1 1/1] ufs: core: Add host quirk QUIRK_MCQ_EXPAND_QUEUE_SLOT
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 03/10] scsi: Use scsi_target as argument for eh_target_reset_handler()
  • From: Benjamin Block <bblock@xxxxxxxxxxxxx>
• Re: [PATCH 03/10] scsi: Use scsi_target as argument for eh_target_reset_handler()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 02/10] scsi: Use Scsi_Host and channel number as argument for eh_bus_reset_handler()
  • From: Benjamin Block <bblock@xxxxxxxxxxxxx>
• Re: [PATCH 03/10] scsi: Use scsi_target as argument for eh_target_reset_handler()
  • From: Benjamin Block <bblock@xxxxxxxxxxxxx>
• Re: [PATCH 02/10] scsi: Use Scsi_Host and channel number as argument for eh_bus_reset_handler()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 02/10] scsi: Use Scsi_Host and channel number as argument for eh_bus_reset_handler()
  • From: Benjamin Block <bblock@xxxxxxxxxxxxx>
• Re: [PATCH] scsi: sd: Introduce manage_shutdown device flag
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/10] scsi: Use Scsi_Host as argument for eh_host_reset_handler
  • From: Benjamin Block <bblock@xxxxxxxxxxxxx>
• RE: [PATCH v1 0/1] ufs: core: Add host quirk QUIRK_MCQ_EXPAND_QUEUE_SLOT
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH 07/13] scsi: fnic: Modify ISRs to support multiqueue(MQ)
  • From: kernel test robot <lkp@xxxxxxxxx>
• [Bug 217599] Adaptec 71605z hangs with aacraid: Host adapter abort request after update to linux 6.4.0
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 217599] Adaptec 71605z hangs with aacraid: Host adapter abort request after update to linux 6.4.0
  • From: bugzilla-daemon@xxxxxxxxxx
• [PATCH v1 1/1] ufs: core: Add host quirk QUIRK_MCQ_EXPAND_QUEUE_SLOT
  • From: Chun-Hung Wu <chun-hung.wu@xxxxxxxxxxxx>
• [PATCH v1 0/1] ufs: core: Add host quirk QUIRK_MCQ_EXPAND_QUEUE_SLOT
  • From: Chun-Hung Wu <chun-hung.wu@xxxxxxxxxxxx>
• Re: [PATCH 1/1] core: ufs: fix racing issue between force complete and isr
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: ufs: qcom-ufs: document the SM8650 UFS Controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2] dt-bindings: ufs: qcom-ufs: document the SM8650 UFS Controller
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: ufs: qcom-ufs: document the SM8560 UFS Controller
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: ufs: qcom-ufs: document the SM8560 UFS Controller
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• RE: [PATCH] dt-bindings: ufs: qcom-ufs: document the SM8560 UFS Controller
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• Re: [PATCH] scsi: ufs: qcom: move ufs_qcom_host_reset() to ufs_qcom_device_reset()
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• [PATCH] dt-bindings: ufs: qcom-ufs: document the SM8560 UFS Controller
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v14 10/19] scsi: core: Retry unaligned zoned writes
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH] scsi: sd: Introduce manage_shutdown device flag
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH] [RFC] scsi: mvsas: Try to enable MSI
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 1/2] scsi: scsi_debug: fix some bugs in sdebug_error_write()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] scsi: sd: Introduce manage_shutdown device flag
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 1/2] scsi: scsi_debug: fix some bugs in sdebug_error_write()
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• Re: [PATCH v17 03/12] block: add copy offload support
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 1/2] scsi: scsi_debug: fix some bugs in sdebug_error_write()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 2/2] scsi: scsi_debug: delete some bogus error checking
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] ufs/core: ufshcd: Conversion to bool not necessary
  • From: Bragatheswaran Manickavel <bragathemanick0908@xxxxxxxxx>
• Re: [PATCH] scsi: ufs: Leave space for '\0' in utf8 desc string
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] ufs/core: ufshcd: Conversion to bool not necessary
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 1/1] core: ufs: fix racing issue between force complete and isr
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] megaraid: fixup debug message in megaraid_abort_and_reset()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] aic79xx: fix up NULL command in ahd_done()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] mptfc: initialize return value in mptfc_bus_reset()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] mpt3sas: Improvised loop logic
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 0/2] cleanup patch
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] pmcraid: add missing scsi_device_put() in pmcraid_eh_target_reset_handler()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: target: core: Fix one kernel-doc comment
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: pmcraid: Fix some kernel-doc comments
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: (subset) [PATCH v7 0/5] UFS: Add OPP support
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: depopulation and restoration in progress
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v6 00/10] scsi:scsi_debug: Add error injection for single device
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 00/12] scsi: mpt3sas: Use flexible arrays and do a few cleanups
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v4 0/3] Support disabling fair tag sharing
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH] scsi: elx: libefc: replace deprecated strncpy with strscpy
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH] scsi: csiostor: replace deprecated strncpy with strscpy
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH] scsi: ch: replace deprecated strncpy with strscpy
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH] scsi: bnx2fc: replace deprecated strncpy with strscpy
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH] scsi: 3w-sas: replace deprecated strncpy with strscpy
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH] scsi: fcoe: replace deprecated strncpy with strscpy
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH] scsi: fcoe: replace deprecated strncpy with strscpy
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• Re: [PATCH] scsi: message: fusion: Fix a possible data race in mpt_ioc_reset()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 1/1] core: ufs: fix racing issue between force complete and isr
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] ufs/core: ufshcd: Conversion to bool not necessary
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH] ufs/core: ufshcd: Conversion to bool not necessary
  • From: Bragatheswaran Manickavel <bragathemanick0908@xxxxxxxxx>
• Re: [PATCH v14 05/19] scsi: Add an argument to scsi_eh_flush_done_q()
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCHv8 00/10] scsi: EH rework, main part
  • From: Benjamin Block <bblock@xxxxxxxxxxxxx>
• Re: [PATCHv8 00/10] scsi: EH rework, main part
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCHv8 00/10] scsi: EH rework, main part
  • From: Benjamin Block <bblock@xxxxxxxxxxxxx>
• Re: [PATCH v14 12/19] scsi: scsi_debug: Add the preserves_write_order module parameter
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v14 10/19] scsi: core: Retry unaligned zoned writes
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v14 05/19] scsi: Add an argument to scsi_eh_flush_done_q()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 1/2] scsi: scsi_debug: fix some bugs in sdebug_error_write()
  • From: Wenchao Hao <haowenchao22@xxxxxxxxx>
• Re: [PATCH 2/2] scsi: scsi_debug: delete some bogus error checking
  • From: Wenchao Hao <haowenchao22@xxxxxxxxx>
• Re: [PATCH v4 0/3] Support disabling fair tag sharing
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: blktests: running nvme and srp tests with real RDMA hardware
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH] scsi: ufs: qcom: move ufs_qcom_host_reset() to ufs_qcom_device_reset()
  • From: Ziqi Chen <quic_ziqichen@xxxxxxxxxxx>
• Re: [PATCH] [RFC] scsi: mvsas: Try to enable MSI
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH 07/10] scsi: libsas: Delete sas_ssp_task.task_prio
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 07/10] scsi: libsas: Delete sas_ssp_task.task_prio
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH v14 05/19] scsi: Add an argument to scsi_eh_flush_done_q()
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• [PATCH 1/1] core: ufs: fix racing issue between force complete and isr
  • From: <alice.chao@xxxxxxxxxxxx>
• [PATCH] scsi: message: fusion: Fix a possible data race in mpt_ioc_reset()
  • From: Tuo Li <islituo@xxxxxxxxx>
• Re: [PATCH 13/16] fnic: allocate device reset command on the fly
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: blktests: running nvme and srp tests with real RDMA hardware
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH] megaraid: fixup debug message in megaraid_abort_and_reset()
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] aic79xx: fix up NULL command in ahd_done()
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] mptfc: initialize return value in mptfc_bus_reset()
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] pmcraid: add missing scsi_device_put() in pmcraid_eh_target_reset_handler()
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: blktests: running nvme and srp tests with real RDMA hardware
  • From: Chaitanya Kulkarni <chaitanyak@xxxxxxxxxx>
• Re: blktests: running nvme and srp tests with real RDMA hardware
  • From: Hannes Reinecke <hare@xxxxxxx>
• RE: [PATCH v4 3/3] scsi: ufs: Disable fair tag sharing
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• blktests: running nvme and srp tests with real RDMA hardware
  • From: Shinichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
• Re: [PATCH v4 0/3] Support disabling fair tag sharing
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH v14 12/19] scsi: scsi_debug: Add the preserves_write_order module parameter
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v14 10/19] scsi: core: Retry unaligned zoned writes
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v14 08/19] scsi: sd: Sort commands by LBA before resubmitting
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v14 06/19] scsi: core: Introduce a mechanism for reordering requests in the error handler
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v14 05/19] scsi: Add an argument to scsi_eh_flush_done_q()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v14 00/19] Improve write performance for zoned UFS devices
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v14 03/19] block: Preserve the order of requeued zoned writes
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v14 02/19] block: Only use write locking if necessary
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH] scsi: elx: libefc: replace deprecated strncpy with strscpy
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• [PATCH v14 19/19] scsi: ufs: Inform the block layer about write ordering
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v14 18/19] scsi: ufs: Forbid auto-hibernation without I/O scheduler
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v14 17/19] scsi: ufs: Simplify ufshcd_auto_hibern8_update()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v14 16/19] scsi: ufs: Change the return type of ufshcd_auto_hibern8_update()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v14 15/19] scsi: ufs: Rename ufshcd_auto_hibern8_enable() and make it static
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v14 14/19] scsi: ufs: hisi: Rework the code that disables auto-hibernation
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v14 13/19] scsi: scsi_debug: Support injecting unaligned write errors
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v14 12/19] scsi: scsi_debug: Add the preserves_write_order module parameter
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v14 11/19] scsi: sd_zbc: Only require an I/O scheduler if needed
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v14 10/19] scsi: core: Retry unaligned zoned writes
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v14 09/19] scsi: sd: Add a unit test for sd_cmp_sector()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v14 08/19] scsi: sd: Sort commands by LBA before resubmitting
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v14 07/19] scsi: core: Add unit tests for scsi_call_prepare_resubmit()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v14 06/19] scsi: core: Introduce a mechanism for reordering requests in the error handler
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v14 05/19] scsi: Add an argument to scsi_eh_flush_done_q()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v14 04/19] block/mq-deadline: Only use zone locking if necessary
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v14 03/19] block: Preserve the order of requeued zoned writes
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v14 02/19] block: Only use write locking if necessary
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v14 01/19] block: Introduce more member variables related to zone write locking
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v14 00/19] Improve write performance for zoned UFS devices​
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 3/3] scsi: ufs: Disable fair tag sharing
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 2/3] scsi: core: Support disabling fair tag sharing
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 1/3] block: Introduce flag BLK_MQ_F_DISABLE_FAIR_TAG_SHARING
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 0/3] Support disabling fair tag sharing
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH] scsi: csiostor: replace deprecated strncpy with strscpy
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• [PATCH] scsi: ch: replace deprecated strncpy with strscpy
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• [PATCH] scsi: bnx2fc: replace deprecated strncpy with strscpy
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• [PATCH] scsi: 3w-sas: replace deprecated strncpy with strscpy
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• Re: [PATCH v2 00/12] scsi: mpt3sas: Use flexible arrays and do a few cleanups
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: mpt3sas ubsan issues
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH 1/2] scsi: scsi_debug: fix some bugs in sdebug_error_write()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] drivers: target: Fixed multiple typos in multiple files
  • From: Muhammad Muzammil <m.muzzammilashraf@xxxxxxxxx>
• Re: mpt3sas ubsan issues
  • From: Niklas Cassel <Niklas.Cassel@xxxxxxx>
• [PATCH 01/10] scsi: Use Scsi_Host as argument for eh_host_reset_handler
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 03/10] scsi: Use scsi_target as argument for eh_target_reset_handler()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 02/10] scsi: Use Scsi_Host and channel number as argument for eh_bus_reset_handler()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 04/10] scsi: Use scsi_device as argument to eh_device_reset_handler()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 07/10] scsi: Do not allocate scsi command in scsi_ioctl_reset()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 05/10] scsi: set host byte after EH completed
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 10/10] scsi: remove SUBMITTED_BY_SCSI_RESET_IOCTL
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 09/10] scsi_error: map FAST_IO_FAIL to -EAGAIN in SCSI EH
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 08/10] scsi_error: iterate over list of failed commands in scsi_eh_bus_device_reset()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 06/10] scsi_error: iterate over list of failed commands in scsi_eh_bus_reset()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCHv8 00/10] scsi: EH rework, main part
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 02/16] bfa: Do not use scsi command to signal TMF status
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 16/16] dc395x: Remove 'scmd' parameter from doing_srb_done()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 15/16] csiostor: use separate TMF command
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 13/16] fnic: allocate device reset command on the fly
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 06/16] xen-scsifront: add scsi device as argument to scsifront_do_request()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 14/16] fnic: use fc_block_rport() correctly
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 12/16] snic: Use scsi_host_busy_iter() to traverse commands
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 11/16] snic: allocate device reset command
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 10/16] snic: reserve tag for TMF
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 05/16] fas216: Rework device reset to not rely on SCSI command pointer
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 01/16] zfcp: do not wait for rports to become unblocked after host reset
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 07/16] xen-scsifront: rework scsifront_action_handler()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 04/16] a1000u2w: do not rely on the command for inia100_device_reset()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 08/16] libiscsi: use cls_session as argument for target and session reset
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 03/16] aha152x: look for stuck command when resetting device
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 09/16] scsi_transport_iscsi: use session as argument for iscsi_block_scsi_eh()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCHv8 00/16] scsi: EH rework prep patches, part 2
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 1/9] scsi: Use Scsi_Host as argument for eh_host_reset_handler
  • From: Hannes Reinecke <hare@xxxxxxx>
• mpt3sas ubsan issues
  • From: Borislav Petkov <bp@xxxxxxxxx>
• [PATCH] megaraid: fixup debug message in megaraid_abort_and_reset()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH] aic79xx: fix up NULL command in ahd_done()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH] mptfc: initialize return value in mptfc_bus_reset()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH] pmcraid: add missing scsi_device_put() in pmcraid_eh_target_reset_handler()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 2/2] scsi: scsi_debug: delete some bogus error checking
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 3/9] scsi: bht: card: Add the source files related to card initialization
  • From: kernel test robot <yujie.liu@xxxxxxxxx>
• Re: [PATCH 5/9] scsi: bht: include: Add the header files related to Bayhub specific struct, enum and macro
  • From: kernel test robot <yujie.liu@xxxxxxxxx>
• [PATCH] [RFC] scsi: mvsas: Try to enable MSI
  • From: Marek Vasut <marex@xxxxxxx>
• Re: Oops with v6.6-rc6+
  • From: Julian Wollrath <jwollrath@xxxxxx>
• Re: Oops with v6.6-rc6+
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: Oops with v6.6-rc6+
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: Oops with v6.6-rc6+
  • From: Borislav Petkov <bp@xxxxxxxxx>
• [Bug 218030] Marvell 88SE6320 SAS controller (mvsas) cannot survive ACPI S3 or ACPI S4
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 218035] New: Adaptec 7805H (pm80xx) hangs even on light I/O with some Seagate HDDs
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v17 08/12] nvmet: add copy command support for bdev and file ns
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH V1 1/4] dt-bindings: ufs: qcom: Add qos property
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [Bug 218030] Marvell 88SE6320 SAS controller (mvsas) cannot survive ACPI S3 or ACPI S4
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 218030] Marvell 88SE6320 SAS controller (mvsas) cannot survive ACPI S3 or ACPI S4
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH 5/7] usb-storage,uas: do not convert device_info for 64-bit platforms
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/7] usb-storage,uas: do not convert device_info for 64-bit platforms
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/7] usb-storage: use fflags index only in usb-storage driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/7] usb-storage,uas: make internal quirks flags 64bit
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] scsi: scsi_debug: fix some bugs in sdebug_error_write()
  • From: Wenchao Hao <haowenchao22@xxxxxxxxx>
• [Bug 218030] New: Marvell 88SE6320 SAS controller (mvsas) cannot survive ACPI S3 or ACPI S4
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi <phill@xxxxxxxxxxxx>
• Re: [PATCH v3 00/14] Pass data temperature information to SCSI disk devices
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [GIT PULL] SCSI fixes for 6.6-rc6
  • From: pr-tracker-bot@xxxxxxxxxx
• [GIT PULL] SCSI fixes for 6.6-rc6
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 03/18] block: Preserve the order of requeued zoned writes
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 11/13] scsi: fnic: Use fnic_lock to protect fnic structures in queuecommand
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH 10/13] scsi: fnic: Add support for multiqueue (MQ) in fnic_main.c
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH 12/13] scsi: fnic: Add support for multiqueue (MQ) in fnic driver
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH 13/13] scsi: fnic: Improve logs and add support for multiqueue (MQ)
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH 07/13] scsi: fnic: Modify ISRs to support multiqueue(MQ)
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH 09/13] scsi: fnic: Remove usage of host_lock
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH 03/13] scsi: fnic: Add and improve log messages
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH 08/13] scsi: fnic: Define stats to track multiqueue (MQ) IOs
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH 06/13] scsi: fnic: Refactor and redefine fnic.h for multiqueue
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH 05/13] scsi: fnic: Get copy workqueue count and interrupt mode from config
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH 04/13] scsi: fnic: Rename wq_copy to hw_copy_wq
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH 01/13] scsi: fnic: Modify definitions to sync with VIC firmware
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH 02/13] scsi: fnic: Add and use fnic number
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• [PATCH 00/13] Introduce support for multiqueue (MQ) in
  • From: Karan Tilak Kumar <kartilak@xxxxxxxxx>
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi <phill@xxxxxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 2/2] scsi: scsi_debug: delete some bogus error checking
  • From: Wenchao Hao <haowenchao22@xxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• Re: [PATCH 09/17] libiscsi: use cls_session as argument for target and session reset
  • From: michael.christie@xxxxxxxxxx
• [PATCH 2/2] scsi: scsi_debug: delete some bogus error checking
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 1/2] scsi: scsi_debug: fix some bugs in sdebug_error_write()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [Bug 217599] Adaptec 71605z hangs with aacraid: Host adapter abort request after update to linux 6.4.0
  • From: bugzilla-daemon@xxxxxxxxxx
• [PATCH] mpt3sas: Improvised loop logic
  • From: Ranjan Kumar <ranjan.kumar@xxxxxxxxxxxx>
• Re: [PATCH v3 0/3] scsi: ufs: core: support WB buffer resize function
  • From: Lu Hongfei <luhongfei@xxxxxxxx>
• Re: [PATCH v2] scsi: snici: remove useless code in snic_dr_clean_pending_req
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH V1 0/4] Add per-cpu PM QoS support for QCOM UFS
  • From: Maramaina Naresh <quic_mnaresh@xxxxxxxxxxx>
• Re: [PATCH 01/16] zfcp: do not wait for rports to become unblocked after host reset
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 5/9] scsi: set host byte after EH completed
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 09/17] libiscsi: use cls_session as argument for target and session reset
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH] scsi: libsas: fix set zero-address when device-type != NO_DEVICE
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• [PATCH] scsi: libsas: fix set zero-address when device-type != NO_DEVICE
  • From: Xingui Yang <yangxingui@xxxxxxxxxx>
• [PATCH v2] scsi: snici: remove useless code in snic_dr_clean_pending_req
  • From: Su Hui <suhui@xxxxxxxxxxxx>
• Re: [PATCH] scsi: snici: Remove dead code in snic_dr_clean_pending_req
  • From: Su Hui <suhui@xxxxxxxxxxxx>
• Re: [PATCH v3 00/14] Pass data temperature information to SCSI disk devices
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v13 05/18] scsi: core: Introduce a mechanism for reordering requests in the error handler
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v13 10/18] scsi: sd_zbc: Only require an I/O scheduler if needed
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v3 00/14] Pass data temperature information to SCSI disk devices
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 5/9] scsi: set host byte after EH completed
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• Re: [PATCH 09/17] libiscsi: use cls_session as argument for target and session reset
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• Re: [PATCH v13 05/18] scsi: core: Introduce a mechanism for reordering requests in the error handler
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3 0/3] scsi: ufs: core: support WB buffer resize function
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v13 05/18] scsi: core: Introduce a mechanism for reordering requests in the error handler
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 01/16] zfcp: do not wait for rports to become unblocked after host reset
  • From: Benjamin Block <bblock@xxxxxxxxxxxxx>
• Re: [PATCH v13 10/18] scsi: sd_zbc: Only require an I/O scheduler if needed
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3 00/14] Pass data temperature information to SCSI disk devices
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v17 12/12] null_blk: add support for copy offload
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2] mpt3sas: suppress a warning in debug kernel
  • From: Tomas Henzl <thenzl@xxxxxxxxxx>
• [PATCH v17 12/12] null_blk: add support for copy offload
  • From: Nitesh Shetty <nj.shetty@xxxxxxxxxxx>
• [PATCH v17 07/12] nvme: add copy offload support
  • From: Nitesh Shetty <nj.shetty@xxxxxxxxxxx>
• [PATCH v17 11/12] null: Enable trace capability for null block
  • From: Nitesh Shetty <nj.shetty@xxxxxxxxxxx>
• [PATCH v17 08/12] nvmet: add copy command support for bdev and file ns
  • From: Nitesh Shetty <nj.shetty@xxxxxxxxxxx>
• [PATCH v17 10/12] dm: Enable copy offload for dm-linear target
  • From: Nitesh Shetty <nj.shetty@xxxxxxxxxxx>
• [PATCH v17 05/12] fs/read_write: Enable copy_file_range for block device.
  • From: Nitesh Shetty <nj.shetty@xxxxxxxxxxx>
• [PATCH v17 04/12] block: add emulation for copy
  • From: Nitesh Shetty <nj.shetty@xxxxxxxxxxx>
• [PATCH v17 09/12] dm: Add support for copy offload
  • From: Nitesh Shetty <nj.shetty@xxxxxxxxxxx>
• [PATCH v17 06/12] fs, block: copy_file_range for def_blk_ops for direct block device
  • From: Nitesh Shetty <nj.shetty@xxxxxxxxxxx>
• [PATCH v17 03/12] block: add copy offload support
  • From: Nitesh Shetty <nj.shetty@xxxxxxxxxxx>
• [PATCH v17 02/12] Add infrastructure for copy offload in block and request layer.
  • From: Nitesh Shetty <nj.shetty@xxxxxxxxxxx>
• [PATCH v17 01/12] block: Introduce queue limits and sysfs for copy-offload support
  • From: Nitesh Shetty <nj.shetty@xxxxxxxxxxx>
• [PATCH v17 00/12] Implement copy offload support
  • From: Nitesh Shetty <nj.shetty@xxxxxxxxxxx>
• Re: [PATCH] scsi: snici: Remove dead code in snic_dr_clean_pending_req
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] scsi: snici: Remove dead code in snic_dr_clean_pending_req
  • From: Su Hui <suhui@xxxxxxxxxxxx>
• Re: [PATCH v3 0/3] scsi: ufs: core: support WB buffer resize function
  • From: Lu Hongfei <luhongfei@xxxxxxxx>
• Re: [PATCH v3 0/3] scsi: ufs: core: support WB buffer resize function
  • From: 路红飞 <luhongfei@xxxxxxxx>
• Re: [PATCH v3 00/14] Pass data temperature information to SCSI disk devices
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v13 10/18] scsi: sd_zbc: Only require an I/O scheduler if needed
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v13 05/18] scsi: core: Introduce a mechanism for reordering requests in the error handler
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v13 03/18] block: Preserve the order of requeued zoned writes
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• RE: [bug report] blktests srp/002 hang
  • From: "Pearson, Robert B" <robert.pearson2@xxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3 00/14] Pass data temperature information to SCSI disk devices
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Jason Gunthorpe <jgg@xxxxxxxx>
• Re: [PATCH v3 00/14] Pass data temperature information to SCSI disk devices
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• Re: [PATCH 1/9] scsi: Use Scsi_Host as argument for eh_host_reset_handler
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3 1/2] scsi: core: cleanup scsi_dev_queue_ready()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3 2/2] scsi: Add comment of target_destroy in scsi_host_template
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3 0/4] SCSI: Fix issues between removing device and error handle
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v13 18/18] scsi: ufs: Inform the block layer about write ordering
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v13 17/18] scsi: ufs: Forbid auto-hibernation without I/O scheduler
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v13 16/18] scsi: ufs: Simplify ufshcd_auto_hibern8_update()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v13 15/18] scsi: ufs: Change the return type of ufshcd_auto_hibern8_update()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v13 14/18] scsi: ufs: Rename ufshcd_auto_hibern8_enable() and make it static
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v13 13/18] scsi: ufs: hisi: Rework the code that disables auto-hibernation
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v13 12/18] scsi: scsi_debug: Support injecting unaligned write errors
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v13 11/18] scsi: scsi_debug: Add the preserves_write_order module parameter
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v13 10/18] scsi: sd_zbc: Only require an I/O scheduler if needed
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v13 09/18] scsi: core: Retry unaligned zoned writes
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v13 08/18] scsi: sd: Add a unit test for sd_cmp_sector()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v13 07/18] scsi: sd: Sort commands by LBA before resubmitting
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v13 06/18] scsi: core: Add unit tests for scsi_call_prepare_resubmit()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v13 05/18] scsi: core: Introduce a mechanism for reordering requests in the error handler
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v13 04/18] block/mq-deadline: Only use zone locking if necessary
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v13 03/18] block: Preserve the order of requeued zoned writes
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v13 02/18] block: Only use write locking if necessary
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v13 01/18] block: Introduce more member variables related to zone write locking
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v13 00/18] Improve write performance for zoned UFS devices
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [EXT] [Bisected] [efeda3bf912f] OOPS crash while performing Block device module parameter test [qla2xxx / FC]
  • From: Tasmiya Nalatwad <tasmiya@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] bnx2fc: Remove dma_alloc_coherent to suppress the BUG_ON.
  • From: John Meneghini <jmeneghi@xxxxxxxxxx>
• Re: [PATCH v3 0/4] SCSI: Fix issues between removing device and error handle
  • From: Wenchao Hao <haowenchao22@xxxxxxxxx>
• RE: [EXT] [Bisected] [efeda3bf912f] OOPS crash while performing Block device module parameter test [qla2xxx / FC]
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• Re: [PATCH 2/6] scsi: ufs: ufs-qcom: Add support for UFS device version detection
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v3 0/4] SCSI: Fix issues between removing device and error handle
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v16 04/12] block: add emulation for copy
  • From: Nitesh Jagadeesh Shetty <nj.shetty@xxxxxxxxxxx>
• [Bisected] [efeda3bf912f] OOPS crash while performing Block device module parameter test [qla2xxx / FC]
  • From: Tasmiya Nalatwad <tasmiya@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] scsi: ufs: ufs-qcom: Add support for UFS device version detection
  • From: Manivannan Sadhasivam <manivannanece23@xxxxxxxxx>
• [PATCH v3 2/2] scsi: Add comment of target_destroy in scsi_host_template
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [PATCH v3 1/2] scsi: core: cleanup scsi_dev_queue_ready()
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [PATCH v3 0/2] cleanup patch
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Zhu Yanjun <yanjun.zhu@xxxxxxxxx>
• Re: [PATCH 7/9] scsi: bht: main: Add the source files related to driver setting management
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 6/9] scsi: bht: linux_os: Add the source files related to SCSI frame and driver entry
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 3/9] scsi: bht: card: Add the source files related to card initialization
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 11/16] snic: allocate device reset command
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 5/9] scsi: set host byte after EH completed
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH v2] drivers: scsi: lpfc: Fixed multiple typos in multiple files
  • From: Muhammad Muzammil <m.muzzammilashraf@xxxxxxxxx>
• Re: [PATCH v2 2/2] scsi: Add comment of target_destroy in scsi_host_template
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• Re: [PATCH v2 1/2] scsi: core: cleanup scsi_dev_queue_ready()
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• Re: [PATCH v3 0/4] SCSI: Fix issues between removing device and error handle
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] scsi: ufs: Leave space for '\0' in utf8 desc string
  • From: Daniel Mentz <danielmentz@xxxxxxxxxx>
• Re: [PATCH v3 0/4] SCSI: Fix issues between removing device and error handle
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 1/2] scsi: core: cleanup scsi_dev_queue_ready()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• Re: [PATCH v2 2/2] scsi: Add comment of target_destroy in scsi_host_template
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [bug report] scsi: lpfc: Validate ELS LS_ACC completion payload
  • From: Justin Tee <justintee8345@xxxxxxxxx>
• [PATCH v3 14/14] scsi_debug: Maintain write statistics per group number
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 13/14] scsi_debug: Implement GET STREAM STATUS
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 10/14] scsi_debug: Rework page code error handling
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 09/14] scsi_debug: Support the block limits extension VPD page
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 12/14] scsi_debug: Implement the IO Advice Hints Grouping mode page
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 11/14] scsi_debug: Rework subpage code error handling
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 06/14] scsi_proto: Add structures and constants related to I/O groups and streams
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 08/14] scsi_debug: Reduce code duplication
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 07/14] sd: Translate data lifetime information
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 05/14] scsi: core: Query the Block Limits Extension VPD page
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 04/14] fs/f2fs: Restore data lifetime support
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 02/14] block: Restore data lifetime support in struct bio and struct request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 03/14] fs: Restore write hint support
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 01/14] fs: Move enum rw_hint into a new header file
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 00/14] Pass data temperature information to SCSI disk devices
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• Re: [PATCH] scsi: ufs: Leave space for '\0' in utf8 desc string
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• RE: [PATCH] scsi: ufs: Leave space for '\0' in utf8 desc string
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Jason Gunthorpe <jgg@xxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Jason Gunthorpe <jgg@xxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• [PATCH] scsi: ufs: Leave space for '\0' in utf8 desc string
  • From: Daniel Mentz <danielmentz@xxxxxxxxxx>
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi <phill@xxxxxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [bug report] blktests srp/002 hang
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• Re: [PATCH v2 0/2] cleanup patch
  • From: Wenchao Hao <haowenchao22@xxxxxxxxx>
• Re: [PATCH v3 0/4] SCSI: Fix issues between removing device and error handle
  • From: Wenchao Hao <haowenchao22@xxxxxxxxx>
• Re: [PATCH -next] scsi: target: core: Fix one kernel-doc comment
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• Re: [bug report] scsi: megaraid: Pass in NULL scb for host reset
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v3 1/4] scsi: core: Add new helper to iterate all devices of host
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [bug report] scsi: aic79xx: Do not reference SCSI command when resetting device
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [bug report] scsi: message: fusion: Open-code mptfc_block_error_handler() for bus reset
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 4/9] scsi: Use scsi_device as argument to eh_device_reset_handler()
  • From: Wenchao Hao <haowenchao2@xxxxxxxxxx>
• [bug report] scsi: megaraid: Pass in NULL scb for host reset
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [bug report] scsi: ufs: core: Only suspend clock scaling if scaling down
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [bug report] scsi: lpfc: Validate ELS LS_ACC completion payload
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [bug report] scsi: aic79xx: Do not reference SCSI command when resetting device
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [bug report] scsi: message: fusion: Open-code mptfc_block_error_handler() for bus reset
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] drivers: scsi: lpfc: Fixed multiple typos in multiple files
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 12/16] snic: Use scsi_host_busy_iter() to traverse commands
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 08/16] libiscsi: use cls_session as argument for target and session reset
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 16/16] dc395x: Remove 'scmd' parameter from doing_srb_done()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 13/16] fnic: allocate device reset command on the fly
  • From: Hannes Reinecke <hare@xxxxxxx>