VMID driver support is a load time configuration setting. Thus, change sysfs attributes to read only. Signed-off-by: Justin Tee <justin.tee@xxxxxxxxxxxx> --- drivers/scsi/lpfc/lpfc_attr.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 48c727a51193..d3a5d6ecdf7d 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -5954,7 +5954,7 @@ LPFC_ATTR_R(enable_mi, 1, 0, 1, "Enable MI"); * 4 - 255 = vmid support enabled for 4-255 VMs * Value range is [4,255]. */ -LPFC_ATTR_RW(max_vmid, LPFC_MIN_VMID, LPFC_MIN_VMID, LPFC_MAX_VMID, +LPFC_ATTR_R(max_vmid, LPFC_MIN_VMID, LPFC_MIN_VMID, LPFC_MAX_VMID, "Maximum number of VMs supported"); /* @@ -5962,7 +5962,7 @@ LPFC_ATTR_RW(max_vmid, LPFC_MIN_VMID, LPFC_MIN_VMID, LPFC_MAX_VMID, * 0 = Timeout is disabled * Value range is [0,24]. */ -LPFC_ATTR_RW(vmid_inactivity_timeout, 4, 0, 24, +LPFC_ATTR_R(vmid_inactivity_timeout, 4, 0, 24, "Inactivity timeout in hours"); /* @@ -5971,7 +5971,7 @@ LPFC_ATTR_RW(vmid_inactivity_timeout, 4, 0, 24, * 1 = Support is enabled * Value range is [0,1]. */ -LPFC_ATTR_RW(vmid_app_header, LPFC_VMID_APP_HEADER_DISABLE, +LPFC_ATTR_R(vmid_app_header, LPFC_VMID_APP_HEADER_DISABLE, LPFC_VMID_APP_HEADER_DISABLE, LPFC_VMID_APP_HEADER_ENABLE, "Enable App Header VMID support"); @@ -5982,7 +5982,7 @@ LPFC_ATTR_RW(vmid_app_header, LPFC_VMID_APP_HEADER_DISABLE, * 2 = Allow all targets * Value range is [0,2]. */ -LPFC_ATTR_RW(vmid_priority_tagging, LPFC_VMID_PRIO_TAG_DISABLE, +LPFC_ATTR_R(vmid_priority_tagging, LPFC_VMID_PRIO_TAG_DISABLE, LPFC_VMID_PRIO_TAG_DISABLE, LPFC_VMID_PRIO_TAG_ALL_TARGETS, "Enable Priority Tagging VMID support"); -- 2.38.0
