Linux IIO (Industrial I/O) Development
[Prev Page][Next Page]
- Re: [PATCH] iio: imu: inv_mpu6050: make arrays hz and d static, (continued)
- [PATCH] iio: magnetometer: st_magn: fix drdy line configuration for LIS3MDL,
Lorenzo Bianconi
- [PATCH] IIO: BME280: Updates to Humidity readings need ctrl_reg write!,
Colin Parker
- [RESEND PATCH v3 0/9] Add STM32 LPTimer: PWM, trigger and counter,
Fabrice Gasnier
- [RESEND PATCH v3 8/9] iio: counter: Add support for STM32 LPTimer, Fabrice Gasnier
- [RESEND PATCH v3 6/9] iio: trigger: Add STM32 LPTimer trigger driver, Fabrice Gasnier
- [RESEND PATCH v3 9/9] iio: adc: stm32: add support for lptimer triggers, Fabrice Gasnier
- [RESEND PATCH v3 1/9] dt-bindings: mfd: Add STM32 LPTimer binding, Fabrice Gasnier
- [RESEND PATCH v3 4/9] pwm: Add STM32 LPTimer PWM driver, Fabrice Gasnier
- [RESEND PATCH v3 7/9] dt-bindings: iio: Add STM32 LPTimer quadrature encoder and counter, Fabrice Gasnier
- [RESEND PATCH v3 2/9] mfd: Add STM32 LPTimer driver, Fabrice Gasnier
- [RESEND PATCH v3 5/9] dt-bindings: iio: Add STM32 LPTimer trigger binding, Fabrice Gasnier
- [RESEND PATCH v3 3/9] dt-bindings: pwm: Add STM32 LPTimer PWM binding, Fabrice Gasnier
- [GIT PULL] Immutable branch between MFD, IIO and PWM due for the v4.14 merge window, Lee Jones
- [PATCH v5] iio: accel: mma8452: improvements to handle multiple events,
Harinath Nampally
[PATCH] iio: multiplexer: check memory allocation failure,
Christophe JAILLET
Offline (more or less) until 3rd September.,
Jonathan Cameron
[PATCH] IIO: BME280: Humidity: Changes to the humidity ctrl_hum require a write to ctrl_meas.,
Colin Parker
[PATCH v2] iio: chemical: ccs811: Add support for data ready trigger,
Narcisa Ana Maria Vasile
[PATCH 2/2] iio: adc: ti-ads1015: add 10% to conversion wait time,
Ladislav Michl
[PATCH 1/2] iio: adc: ti-ads1015: write config register only on change,
Ladislav Michl
[PATCH] iio: adc: ti-ads1015: fix comparator polarity setting,
Akinobu Mita
[PATCH] iio: imu: inv_mpu6050: fix missing break in switch,
Gustavo A. R. Silva
[PATCH 0/6] IIO driver for MCP3550/1/3,
Lukas Wunner
[PATCH] mfd: Add support for TI LMP92001,
s . abhisit
Re: [PATCH] mfd: Add support for TI LMP92001, Jonathan Cameron
Re: [PATCH] mfd: Add support for TI LMP92001, kbuild test robot
Re: [PATCH] mfd: Add support for TI LMP92001, Rob Herring
[PATCH v2 0/7] iio: accel: kxcjk1003: support Kionix KXTF9,
Michał Mirosław
[PATCH 4/4] staging: iio: tsl2x7x: constify i2c_device_id,
Arvind Yadav
[PATCH] iio staging: tsl2x7x: clean up limit checks,
Dan Carpenter
[PATCH v4] iio: accel: mma8452: improvements to handle multiple events,
Harinath Nampally
[PULL] Second set of new device support, features and cleanups for IIO in the 4.14 cycle.,
Jonathan Cameron
[PATCH] iio: accel: mma8452: code improvements to handle more than one event,
Harinath Nampally
[PULL] Second set of IIO fixes for the 4.13 cycle.,
Jonathan Cameron
[PATCH 0/3] constify iio i2c_device_id,
Arvind Yadav
Possible race in xilinx-xadc.ko,
Anton Volkov
[PATCH v4 0/5] iio: srf08: add support for similar devices and triggered buffers,
Andreas Klinger
[PATCH v4 3/5] iio: srf08: add triggered buffer support, Andreas Klinger
[PATCH v4 4/5] iio: srf08: add sensor type srf10, Andreas Klinger
[PATCH v4 5/5] iio: srf08: add support for srf02 in i2c mode, Andreas Klinger
[PATCH v4 2/5] iio: srf08: add device tree table, Andreas Klinger
[PATCH v4 1/5] iio: srf08: add device tree binding for srf02 and srf10,
Andreas Klinger
[PATCH v2 0/5] Add support to LIS2DW12 accel sensor,
Lorenzo Bianconi
[PATCH 0/6] iio: accel: kxcjk1003: support Kionix KXTF9,
Michał Mirosław
[RFC PATCH v4 0/6] i2c: document DMA handling and add helpers for it,
Wolfram Sang
[PATCH 0/4] iio: magnetometer: ak8974: support AMI306,
Michał Mirosław
[PATCH] iio: chemical: ccs811: Add support for data ready trigger,
Narcisa Ana Maria Vasile
[PATCH v2] iio: chemical: ccs811: Add triggered buffer support,
Narcisa Ana Maria Vasile
[PATCH v3 0/5] iio: srf08: add support for similar devices and triggered buffers,
Andreas Klinger
[PATCH v3 3/5] iio: srf08: add triggered buffer support,
Andreas Klinger
[PATCH v3 5/5] iio: srf08: add support for srf02 in i2c mode, Andreas Klinger
[PATCH v3 4/5] iio: srf08: add sensor type srf10,
Andreas Klinger
[PATCH v3 2/5] iio: srf08: add device tree table,
Andreas Klinger
[PATCH v3 1/5] iio: srf08: add device tree binding for srf02 and srf10,
Andreas Klinger
[PATCH 0/5] Add support to LIS2DW12 accel sensor,
Lorenzo Bianconi
[PATCH 0/4] Add support to LIS2MDL magnetometer sensor,
Lorenzo Bianconi
[PATCH] iio: adc: select triggered buffer for sama5d2 adc,
Arnd Bergmann
[PATCH] iio: accel: mma8452: Bugfix to enbale and allow different events to work parallely.,
Harinath Nampally
[PATCH v2 5/5] iio: srf08: add support for srf02 in i2c mode,
Andreas Klinger
[PATCH v2 4/5] iio: srf08: add sensor type srf10, Andreas Klinger
[PATCH v2 3/5] iio: srf08: add triggered buffer support,
Andreas Klinger
[PATCH v2 2/5] iio: srf08: add device tree table, Andreas Klinger
[PATCH v2 1/5] iio: srf08: add device tree binding for srf02 and srf10,
Andreas Klinger
[PATCH v2 0/5] iio: srf08: add support for similar devices and triggered buffers, Andreas Klinger
[PATCH] HID: sensor: constify platform_device_id,
Arvind Yadav
[PATCH] iio: hid-sensor-trigger: Fix the race with user space powering up sensors,
Srinivas Pandruvada
[PATCH 0/2] iio: st_sensors: fix data-ready pin configuration,
Lorenzo Bianconi
[PATCH v2 0/8] platform/chrome: cros_ec: Fixes and improvements,
Thierry Escande
[PATCH v3 00/13] Support more devices on rockchip rv1108,
Andy Yan
Re: [PATCH 1/8] iio: cros_ec: Relax sampling frequency before suspending,
Benson Leung
[RFT][PATCH] iio: hid-sensor-trigger: Fix the race with user space powering up sensors,
Srinivas Pandruvada
[PATCH 0/3] iio: adc: at91-sama5d2_adc: add DMA support,
Eugen Hristev
[PATCH v2] iio: adc: Fix coding style violations,
Michal Simek
[PATCH] staging: iio: adc: fix error return code in ad7606_par_probe(),
Gustavo A. R. Silva
[PATCH] iio: adc: Fix coding style violations,
Michal Simek
[PATCH] hid-sensor-hub: Force logical minimum to 1 for power and report state,
Srinivas Pandruvada
[PATCH] iio: imu: adis16480: Fix acceleration scale factor for adis16480,
Dragos Bogdan
[PATCH 2/4] HID: sensor: constify attribute_group structures., Arvind Yadav
[PATCH] iio: trigger: stm32-timer: fix get trigger mode,
Fabrice Gasnier
[PATCH 0/3] iio: trigger: stm32-timer: add STM32H7 variant,
Fabrice Gasnier
[PATCH 6/7] iio: srf08: add buffered to device mode,
Andreas Klinger
[PATCH 7/7] iio: srf08: change text in Kconfig,
Andreas Klinger
[PATCH 5/7] iio: srf08: add support for srf02 in i2c mode,
Andreas Klinger
[PATCH 4/7] iio: srf08: add device tree table,
Andreas Klinger
[PATCH 3/7] iio: srf08: add triggered buffer support,
Andreas Klinger
[PATCH 2/7] iio: srf08: add sensor type srf10,
Andreas Klinger
[PATCH 1/7] iio: srf08: add device tree binding for srf02 and srf10,
Andreas Klinger
[PATCH 0/7] iio: srf08: add support for similar devices and triggered buffers, Andreas Klinger
[PATCH] iio: chemical: ccs811: Add ACPI support,
Narcisa Ana Maria Vasile
[PATCH v2 00/23] Support more devices on rockchip rv1108,
Andy Yan
[PATCH] iio: chemical: ccs811: Add triggered buffer support,
Narcisa Ana Maria Vasile
[PATCH 5/5] Documentation: bindings: Add ti,lmp92001,
s . abhisit
[PATCH 3/5] iio: Add support for LMP92001 DAC,
s . abhisit
[PATCH 2/5] iio: Add support for LMP92001 ADC,
s . abhisit
Re: [PATCH 2/5] iio: Add support for LMP92001 ADC, Peter Meerwald-Stadler
[PATCH 0/2] iio: adc: ti-ads1015: fix channel crosstalk,
Ladislav Michl
[PATCH 0/3] iio: Introduce the generic counter interface,
William Breathitt Gray
[PATCH] iio: accel: Bugfix to enbale and allow different events to work parallely.,
Harinath Nampally
PATCH] iio: Fix some documentation warnings,
Jonathan Corbet
[PATCH v3 00/11] iio: adc: ti-ads1015: fixes, cleanups, and threshold event support,
Akinobu Mita
- [PATCH v3 01/11] iio: adc: ti-ads1015: fix incorrect data rate setting update, Akinobu Mita
- [PATCH v3 02/11] iio: adc: ti-ads1015: fix scale information for ADS1115, Akinobu Mita
- [PATCH v3 03/11] iio: adc: ti-ads1015: enable conversion when CONFIG_PM is not set, Akinobu Mita
- [PATCH v3 04/11] iio: adc: ti-ads1015: avoid getting stale result after runtime resume, Akinobu Mita
- [PATCH v3 05/11] iio: adc: ti-ads1015: don't return invalid value from buffer setup callbacks, Akinobu Mita
- [PATCH v3 06/11] iio: adc: ti-ads1015: add adequate wait time to get correct conversion, Akinobu Mita
- [PATCH v3 07/11] iio: adc: ti-ads1015: remove unnecessary config register update, Akinobu Mita
- [PATCH v3 08/11] iio: adc: ti-ads1015: add helper to set conversion mode, Akinobu Mita
- [PATCH v3 09/11] iio: adc: ti-ads1015: use devm_iio_triggered_buffer_setup, Akinobu Mita
- [PATCH v3 10/11] iio: adc: ti-ads1015: use iio_device_claim_direct_mode(), Akinobu Mita
- [PATCH v3 11/11] iio: adc: ti-ads1015: add threshold event support, Akinobu Mita
[PATCH v1 1/2] iio: tools: move to tools buildsystem,
Andy Shevchenko
[PATCH v2 0/2] iio: ti-ads7950: Make it working on ACPI platforms,
Andy Shevchenko
[PATCH 0/4] iio: trigger: stm32-timer fixes,
Fabrice Gasnier
[PATCH] iio: adc: ina219: Avoid underflow for sleeping time,
Stefan Brüns
[PATCH v1 1/2] iio: adc: ti-ads7951: Allow to use on ACPI platforms,
Andy Shevchenko
[PULL] First set of IIO new device support, features and cleanups for the 4.14 cycle.,
Jonathan Cameron
[PATCH] iio: bmp280: properly initialize device for humidity reading,
Andreas Klinger
[PATCH v2 0/3] Allow to tune sampling time on STM32 ADC,
Fabrice Gasnier
[PATCH V2 00/45] IIO: Drop manual assignment of THIS_MODULE,
Jonathan Cameron
- [PATCH 02/45] iio: triggers: Use macros to avoid boilerplate assignment of owner., Jonathan Cameron
- [PATCH 01/45] iio: Use macro magic to avoid manual assign of driver_module, Jonathan Cameron
- [PATCH 03/45] iio:trigger: Remove necessity to have a trig->ops structure., Jonathan Cameron
- [PATCH 04/45] coccinelle: Add an iio_no_owner semantic patch to drop driver_owner, Jonathan Cameron
- [PATCH 06/45] iio:accel: drop assign iio_info.driver_module and iio_trigger_ops.owner, Jonathan Cameron
- [PATCH 08/45] iio:chemical: drop assign iio_info.driver_module and iio_trigger_ops.owner, Jonathan Cameron
- [PATCH 07/45] iio:amplifiers:ad8366 drop assign iio_info.driver_module and iio_trigger_ops.owner, Jonathan Cameron
- [PATCH 05/45] iio:adc: drop assign iio_info.driver_module and iio_trigger_ops.owner, Jonathan Cameron
- [PATCH 09/45] iio:common: drop assign iio_info.driver_module and iio_trigger_ops.owner, Jonathan Cameron
- [PATCH 13/45] iio:frequency: drop assign iio_info.driver_module, Jonathan Cameron
- [PATCH 12/45] iio:dummy: drop assignment of iio_info.driver_module, Jonathan Cameron
- [PATCH 14/45] iio:gyro: drop assign iio_info.driver_module and iio_trigger_ops.owner, Jonathan Cameron
- [PATCH 11/45] iio:dac: drop assignment of iio_info.driver_module, Jonathan Cameron
- [PATCH 10/45] iio:counter:104-quad-8 drop assign iio_info.driver_module, Jonathan Cameron
- [PATCH 31/45] staging:iio:gyro:adis16060 drop assign iio_info.driver_module, Jonathan Cameron
- [PATCH 32/45] staging:iio:ad5933: drop assign iio_info.driver_module, Jonathan Cameron
- [PATCH 34/45] iio:resolver: drop assignment of iio_info.driver_module, Jonathan Cameron
- [PATCH 29/45] staging:iio:cdc: drop assign iio_info.driver_module, Jonathan Cameron
- [PATCH 37/45] input: tsc2007 - drop the driver_module assignment in iio interface., Jonathan Cameron
- [PATCH 35/45] iio:adc: drop assignment of iio_trigger_ops.owner, Jonathan Cameron
- [PATCH 36/45] staging:iio:light:tsl2x7x drop assignment of driver_module, Jonathan Cameron
- [PATCH 33/45] staging:iio:meter: drop assign iio_info.driver_module and iio_trigger_ops.owner, Jonathan Cameron
- [PATCH 30/45] staging:iio:frequency: drop assign iio_info.driver_module, Jonathan Cameron
- [PATCH 44/45] staging:iio:docs: drop reference to setting trig_ops->owner, Jonathan Cameron
- [PATCH 26/45] iio:triggers: drop assign iio_info.driver_module and iio_trigger_ops.owner, Jonathan Cameron
- [PATCH 38/45] platform/x86: toshiba_acpi: drop assignment of iio_info.driver_module, Jonathan Cameron
- [PATCH 39/45] iio: drop iio_info.driver_module and iio_trigger_ops.owner., Jonathan Cameron
- [PATCH 40/45] iio:adc:max9611: Drop explicit setting of the i2c module owner., Jonathan Cameron
- [PATCH 41/45] iio:adc:ti-ads8688: Drop manual setting of the driver owner field., Jonathan Cameron
- [PATCH 45/45] staging:iio:docs: drop setting of THIS_MODULE from staging docs., Jonathan Cameron
- [PATCH 43/45] iio:potentiometer:max5487: Drop explicit setting of module owner, Jonathan Cameron
- [PATCH 42/45] iio:potentiometer:max5481 drop explicit setting of the owner module., Jonathan Cameron
- [PATCH 15/45] iio:health: drop assign iio_info.driver_module and iio_trigger_ops.owner, Jonathan Cameron
- [PATCH 17/45] iio:imu: drop assign iio_info.driver_module and iio_trigger_ops.owner, Jonathan Cameron
- [PATCH 20/45] iio:orientation: drop assign iio_info.driver_module, Jonathan Cameron
- [PATCH 21/45] iio:dpot: drop assign iio_info.driver_module, Jonathan Cameron
- [PATCH 24/45] iio:proximity: drop assign iio_info.driver_module and iio_trigger_ops.owner, Jonathan Cameron
- [PATCH 22/45] iio:potentiostat:lmp91000 drop assign iio_info.driver_module and iio_trigger_ops.owner, Jonathan Cameron
- [PATCH 25/45] iio:temperature: drop assignment of iio_info.driver_module, Jonathan Cameron
- [PATCH 27/45] staging:iio:accel: drop assignment of iio_info.driver_module, Jonathan Cameron
- [PATCH 23/45] iio:pressure: drop assign iio_info.driver_module and iio_trigger_ops.owner, Jonathan Cameron
- [PATCH 28/45] staging:iio:adc: drop assign iio_info.driver_module, Jonathan Cameron
- [PATCH 18/45] iio:light: drop assign iio_info.driver_module and iio_trigger_ops.owner, Jonathan Cameron
- [PATCH 19/45] iio:magnetometer: drop assign iio_info.driver_module and iio_trigger_ops.owner, Jonathan Cameron
- [PATCH 16/45] iio:humidity: drop assign iio_info.driver_module and iio_trigger_ops.owner, Jonathan Cameron
- Re: [PATCH V2 00/45] IIO: Drop manual assignment of THIS_MODULE, Jonathan Cameron
[PATCH v3 0/5] IIO-based thermal sensor driver for Allwinner H3 SoC,
Icenowy Zheng
[PULL] First round of fixes for IIO in the 4.13 cycle,
Jonathan Cameron
[PATCH v2 00/11] iio: adc: ti-ads1015: fixes, cleanups, and threshold event support,
Akinobu Mita
- [PATCH v2 01/11] iio: adc: ti-ads1015: fix incorrect data rate setting update, Akinobu Mita
- [PATCH v2 02/11] iio: adc: ti-ads1015: fix scale information for ADS1115, Akinobu Mita
- [PATCH v2 03/11] iio: adc: ti-ads1015: enable conversion when CONFIG_PM is not set, Akinobu Mita
- [PATCH v2 04/11] iio: adc: ti-ads1015: avoid getting stale result after runtime resume, Akinobu Mita
- [PATCH v2 05/11] iio: adc: ti-ads1015: don't return invalid value from buffer setup callbacks, Akinobu Mita
- [PATCH v2 06/11] iio: adc: ti-ads1015: add adequate wait time to get correct conversion, Akinobu Mita
- [PATCH v2 07/11] iio: adc: ti-ads1015: remove unnecessary config register update, Akinobu Mita
- [PATCH v2 08/11] iio: adc: ti-ads1015: add helper to set conversion mode, Akinobu Mita
- [PATCH v2 09/11] iio: adc: ti-ads1015: use devm_iio_triggered_buffer_setup, Akinobu Mita
- [PATCH v2 10/11] iio: adc: ti-ads1015: use iio_device_claim_direct_mode(), Akinobu Mita
- [PATCH v2 11/11] iio: adc: ti-ads1015: add threshold event support, Akinobu Mita
[PATCH 032/102] iio: dac: stm32-dac-core: explicitly request exclusive reset control,
Philipp Zabel
[PATCH 031/102] iio: adc: rockchip_saradc: explicitly request exclusive reset control,
Philipp Zabel
[PATCH v3 1/3] Staging: speakup: speakup_keypc.c: usleep_range is preferred over udelay,
Jaya Durga
[PATCH] iio: Convert to using %pOF instead of full_name,
Rob Herring
[PATCH 0/3] Allow to tune sampling time on STM32 ADC,
Fabrice Gasnier
[PATCH v3 3/3] Staging: iio: adc: ad7280a.c: Fixed Macro argument reuse,
Jaya Durga
[PATCH v2 3/3] Staging: iio: adc: ad7280a.c: Fixed Macro argument reuse,
Jaya Durga
[PATCH v3 0/4] i2c: document DMA handling and add helpers for it,
Wolfram Sang
[PATCH 3/3] Staging: iio: adc: ad7280a.c: Fixed Macro argument reuse,
Jaya Durga
[PATCH 2/2] Staging: iio: light: tsl2x7x_core.c: Replace symbolic permission with octal permission,
Jaya Durga
[PATCH] staging: iio: adc: add space around substraction operation,
Hari Prasath
[PATCH v3] iio: chemical: ccs811: Add support for AMS CCS811 VOC sensor,
Narcisa Ana Maria Vasile
[PATCH v2 00/10] hts221: add new features and fix power-off procedure,
Lorenzo Bianconi
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]
