On Thu, 14 Dec 2017 15:51:43 -0500 William Breathitt Gray <vilhelm.gray@xxxxxxxxx> wrote: > This patch adds standard documentation for the userspace sysfs > attributes of the Simple Counter interface. > > Signed-off-by: William Breathitt Gray <vilhelm.gray@xxxxxxxxx> > --- > .../ABI/testing/sysfs-bus-counter-simple-sysfs | 61 ++++++++++++++++++++++ > 1 file changed, 61 insertions(+) > create mode 100644 Documentation/ABI/testing/sysfs-bus-counter-simple-sysfs > > diff --git a/Documentation/ABI/testing/sysfs-bus-counter-simple-sysfs b/Documentation/ABI/testing/sysfs-bus-counter-simple-sysfs > new file mode 100644 > index 000000000000..e1f32c64c667 > --- /dev/null > +++ b/Documentation/ABI/testing/sysfs-bus-counter-simple-sysfs > @@ -0,0 +1,61 @@ > +What: /sys/bus/counter/devices/counterX/countY > +KernelVersion: 4.16 > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Count data of Count Y. This is a signed integer value that > + represents the accumulated count. > + > +What: /sys/bus/counter/devices/counterX/countY_function > +KernelVersion: 4.16 > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Count function mode of Count Y. Count function evaluation is > + triggered by conditions specified by the countY_signalZ_action > + attributes. Two count function modes are available: increase and > + decrease. > + > + Increase: > + Accumulated count is incremented. > + > + Decrease: > + Accumulated count is decremented. Ah, so the specifics are in these files. Fair enough I suppose though in that case. Perhaps add a note where relevant in the generic file to say this. > + > +What: /sys/bus/counter/devices/counterX/countY_max > +KernelVersion: 4.16 > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Count Y count data maximum value. What does this mean? Does it wrap here, or stop here? Needs defining. > + > +What: /sys/bus/counter/devices/counterX/countY_min > +KernelVersion: 4.16 > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Count Y count data minimum value. > + > +What: /sys/bus/counter/devices/counterX/countY_signalZ_action > +KernelVersion: 4.16 > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Action mode of Count Y for Signal Z. This attribute indicates > + the condition of Signal Z that triggers the count function > + evaluation for Count Y. Four action modes are available: none, > + rising edge, falling edge, and both edges. I'd put the values in quotes to make it easy to isolate them. > + > + None: > + Signal does not trigger the count function. > + > + Rising Edge: > + Low state transitions to High state. > + > + Falling Edge: > + High state transitions to Low state. > + > + Both Edges: > + Any state transition. > + > +What: /sys/bus/counter/devices/counterX/signalY > +KernelVersion: 4.16 > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Signal data of Signal Y. This is the respective input level > + represented by two available states: low and high. -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
