Re: [PATCH v2 2/2] dt-bindings: iio: light: add UVIS25 device bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 23 Nov 2017 23:59:06 +0100
Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx> wrote:

> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
Applied
> ---
>  .../devicetree/bindings/iio/light/uvis25.txt       | 23 ++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/light/uvis25.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/light/uvis25.txt b/Documentation/devicetree/bindings/iio/light/uvis25.txt
> new file mode 100644
> index 000000000000..3041207e3f3c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/light/uvis25.txt
> @@ -0,0 +1,23 @@
> +* ST UVIS25 uv sensor
> +
> +Required properties:
> +- compatible: should be "st,uvis25"
> +- reg: i2c address of the sensor / spi cs line
> +
> +Optional properties:
> +- interrupt-parent: should be the phandle for the interrupt controller
> +- interrupts: interrupt mapping for IRQ. It should be configured with
> +  flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
> +  IRQ_TYPE_EDGE_FALLING.
> +
> +  Refer to interrupt-controller/interrupts.txt for generic interrupt
> +  client node bindings.
> +
> +Example:
> +
> +uvis25@47 {
> +	compatible = "st,uvis25";
> +	reg = <0x47>;
> +	interrupt-parent = <&gpio0>;
> +	interrupts = <0 IRQ_TYPE_EDGE_RISING>;
> +};

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux