On Wed, 6 Dec 2017 17:52:34 +0000
Jeremy Cline <jeremy@xxxxxxxxxx> wrote:
> Some BOSC0200 acpi_device-s describe two accelerometers in a single ACPI
> device. Check for a companion device and handle a second i2c_client
> if it is present.
>
> Signed-off-by: Jeremy Cline <jeremy@xxxxxxxxxx>
The requirement for this is still horrible, but you have done a nice
clean job on implementing it.
I'll let this sit for a few more days though before applying it.
Probably next weekend if we don't get any feedback before then.
Thanks,
Jonathan
> ---
> Changes in v2:
> - Rather than exposing the bmc150_accel_data struct, use get and set
> functions.
>
> drivers/iio/accel/bmc150-accel-core.c | 20 ++++++++++++++++++++
> drivers/iio/accel/bmc150-accel-i2c.c | 29 ++++++++++++++++++++++++++++-
> drivers/iio/accel/bmc150-accel.h | 2 ++
> 3 files changed, 50 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c
> index 870f92ef61c2..7496c5121a8c 100644
> --- a/drivers/iio/accel/bmc150-accel-core.c
> +++ b/drivers/iio/accel/bmc150-accel-core.c
> @@ -204,6 +204,7 @@ struct bmc150_accel_data {
> int ev_enable_state;
> int64_t timestamp, old_timestamp; /* Only used in hw fifo mode. */
> const struct bmc150_accel_chip_info *chip_info;
> + struct i2c_client *second_device;
> };
>
> static const struct {
> @@ -1659,6 +1660,25 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
> }
> EXPORT_SYMBOL_GPL(bmc150_accel_core_probe);
>
> +struct i2c_client *bmc150_get_second_device(struct i2c_client *client)
> +{
> + struct bmc150_accel_data *data = i2c_get_clientdata(client);
> +
> + if (!data)
> + return NULL;
> +
> + return data->second_device;
> +}
> +EXPORT_SYMBOL_GPL(bmc150_get_second_device);
> +
> +void bmc150_set_second_device(struct i2c_client *client)
> +{
> + struct bmc150_accel_data *data = i2c_get_clientdata(client);
> + if (data)
> + data->second_device = client;
> +}
> +EXPORT_SYMBOL_GPL(bmc150_set_second_device);
> +
> int bmc150_accel_core_remove(struct device *dev)
> {
> struct iio_dev *indio_dev = dev_get_drvdata(dev);
> diff --git a/drivers/iio/accel/bmc150-accel-i2c.c b/drivers/iio/accel/bmc150-accel-i2c.c
> index f85014fbaa12..c7341df086e2 100644
> --- a/drivers/iio/accel/bmc150-accel-i2c.c
> +++ b/drivers/iio/accel/bmc150-accel-i2c.c
> @@ -31,6 +31,10 @@
> static int bmc150_accel_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> + int ret;
> + struct acpi_device *adev;
> + struct i2c_board_info board_info;
> + struct i2c_client *second_dev;
> struct regmap *regmap;
> const char *name = NULL;
> bool block_supported =
> @@ -47,12 +51,35 @@ static int bmc150_accel_probe(struct i2c_client *client,
> if (id)
> name = id->name;
>
> - return bmc150_accel_core_probe(&client->dev, regmap, client->irq, name,
> + ret = bmc150_accel_core_probe(&client->dev, regmap, client->irq, name,
> block_supported);
> + if (ret)
> + return ret;
> +
> + /*
> + * Some BOSC0200 acpi_devices describe 2 accelerometers in a single ACPI
> + * device, try instantiating a second i2c_client for an I2cSerialBusV2
> + * ACPI resource with index 1.
> + */
> + adev = ACPI_COMPANION(&client->dev);
> + if (adev && strcmp(acpi_device_hid(adev), "BOSC0200") == 0) {
> + memset(&board_info, 0, sizeof(board_info));
> + strlcpy(board_info.type, "bma250e", I2C_NAME_SIZE);
> + second_dev = i2c_acpi_new_device(&client->dev, 1, &board_info);
> + if (second_dev)
> + bmc150_set_second_device(second_dev);
> + }
> +
> + return ret;
> }
>
> static int bmc150_accel_remove(struct i2c_client *client)
> {
> + struct i2c_client *second_dev = bmc150_get_second_device(client);
> +
> + if (second_dev)
> + i2c_unregister_device(second_dev);
> +
> return bmc150_accel_core_remove(&client->dev);
> }
>
> diff --git a/drivers/iio/accel/bmc150-accel.h b/drivers/iio/accel/bmc150-accel.h
> index ae6118ae11b1..6e965a3ca322 100644
> --- a/drivers/iio/accel/bmc150-accel.h
> +++ b/drivers/iio/accel/bmc150-accel.h
> @@ -16,6 +16,8 @@ enum {
> int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
> const char *name, bool block_supported);
> int bmc150_accel_core_remove(struct device *dev);
> +struct i2c_client *bmc150_get_second_device(struct i2c_client *second_device);
> +void bmc150_set_second_device(struct i2c_client *second_device);
> extern const struct dev_pm_ops bmc150_accel_pm_ops;
> extern const struct regmap_config bmc150_regmap_conf;
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
