On Thu, 17 Nov 2005, Hartmut Hackmann wrote: > Hi, [...] > Well, regarding the firmware: of course the channel decoder can't work > without it. Most recent cards have an eeprom for this and dont need > an external file to boot the DSP. But the code for the 300i seems to be in a need for the correct firware being loaded. At least that is how I understood the error messages, Vince has posted. > I think some gpio setting needs to > be changed for this board. The hard thing is the different tuner application > which should cause poor sensitivity. The necessary changes go over more > than one module and are thus more that 2 hours of hacking. OK > I can do this, but first i want to get the radio with this chip > working and get the NICAM problems fixed. OK, I am not in a hurry. :-) > Hartmut Regards, Rainer -- Rainer Schubert - Linux TV User Amateur Radio Call DL6HBO
