Hi, I try to install the pinnacle 310i but without success. I have debian with kernel 2.6.14.2 I do modprobe saa7134 card=50 tuner=3 $ dmesg saa7130/34: v4l2 driver version 0.2.14 loaded saa7133[0]: found at 0000:01:07.0, rev: 208, irq: 177, latency: 32, mmio: 0xf5001000 saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 300i DVB-T + PAL [card=50,insmod option] saa7133[0]: board init: gpio is 600c000 saa7133[0]: dsp access wait timeout [bit=WRR] saa7133[0]: dsp access wait timeout [bit=WRR] saa7133[0]: dsp access wait timeout [bit=WRR] tuner 0-004b: chip found @ 0x96 (saa7133[0]) saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2c 43 46 ff ff saa7133[0]: i2c eeprom 20: 01 2c 01 02 02 01 04 30 98 ff 00 a5 ff 21 00 c2 saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff ff 0c 22 17 88 03 28 bf a8 saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 modprobe saa7134-dvb gives me that error in dmesg: saa7133[0]: pinnacle 300i dvb setup saa7133[0]: frontend initialization failed I can't make work analog and digital tv. I only have balck screen for all analog channels with tvtime, xawtv or mplayer. Could you help me to have at least analog tv working? thanks vince ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
