> People have reported partial success with card type 77. SInce it is a hybrid > board, i would like you to try card 81 from recent CVS. It also supports > DVB-T. > > Good luck > Hartmut Hi, I'm trying the dvb part with 310i. I do modprobe saa7134 card=81 and modprobe saa7134-dvb All seems to be good here. But after I ran "dvbscan -n -o zap -p /usr/local/share/dvb/scan/dvb-t/fr-Reims > channels.conf" I get this: scanning /usr/local/share/dvb/scan/dvb-t/fr-Reims using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 562000000 0 2 9 3 1 0 0 initial transponder 554000000 0 2 9 3 1 0 0 initial transponder 602000000 0 2 9 3 1 0 0 initial transponder 578000000 0 2 9 3 1 0 0 initial transponder 666000000 0 2 9 3 1 0 0 initial transponder 642000000 0 2 9 3 1 0 0 >>> tune to: 562000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE __tune_to_transponder:1478: ERROR: FE_READ_STATUS failed: 5 Input/output error >>> tune to: 562000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE __tune_to_transponder:1478: ERROR: FE_READ_STATUS failed: 5 Input/output error >>> tune to: 554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE __tune_to_transponder:1478: ERROR: FE_READ_STATUS failed: 5 Input/output error >>> tune to: 554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE __tune_to_transponder:1478: ERROR: FE_READ_STATUS failed: 5 Input/output error >>> tune to: 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE __tune_to_transponder:1478: ERROR: FE_READ_STATUS failed: 5 Input/output error >>> tune to: 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE __tune_to_transponder:1478: ERROR: FE_READ_STATUS failed: 5 Input/output error >>> tune to: 578000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE __tune_to_transponder:1478: ERROR: FE_READ_STATUS failed: 5 Input/output error >>> tune to: 578000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE __tune_to_transponder:1478: ERROR: FE_READ_STATUS failed: 5 Input/output error >>> tune to: 666000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE __tune_to_transponder:1478: ERROR: FE_READ_STATUS failed: 5 Input/output error >>> tune to: 666000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE __tune_to_transponder:1478: ERROR: FE_READ_STATUS failed: 5 Input/output error >>> tune to: 642000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE __tune_to_transponder:1478: ERROR: FE_READ_STATUS failed: 5 Input/output error >>> tune to: 642000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE __tune_to_transponder:1478: ERROR: FE_READ_STATUS failed: 5 Input/output error ERROR: initial tuning failed dumping lists (0 services) Done. This is the dmesg: tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision 0 -- invalid tda1004x: booting from eeprom tda1004x: found firmware revision 0 -- invalid tda1004x: firmware upload failed tda1004x: pll set failed tda1004x: pll set failed tda1004x: pll set failed tda1004x: pll set failed tda1004x: pll set failed tda1004x: pll set failed tda1004x: pll set failed tda1004x: pll set failed tda1004x: pll set failed tda1004x: pll set failed tda1004x: pll set failed tda1004x: pll set failed tda1004x: pll set failed tda1004x: pll set failed tda1004x: pll set failed tda1004x: pll set failed tda1004x: pll set failed tda1004x: pll set failed I do ./get_dvb_firmware tda10046 and then copy the file "dvb-fe-tda10046.fw" to /usr/local/lib/firmware/ But I didn't see any changes. Could you tell me where is my mistake? thanks vince ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
