On Thu, 17 Nov 2005, bardinov@xxxxxx wrote: Hi Vince, Hartmut and the list, [...] > Hi, > > I'm trying the dvb part with 310i. > I do modprobe saa7134 card=81 and > modprobe saa7134-dvb > All seems to be good here. OK. > But after I ran "dvbscan -n -o zap -p /usr/local/share/dvb/scan/dvb-t/fr-Reims > > channels.conf" I get this: > > scanning /usr/local/share/dvb/scan/dvb-t/fr-Reims > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > initial transponder 562000000 0 2 9 3 1 0 0 > initial transponder 554000000 0 2 9 3 1 0 0 > initial transponder 602000000 0 2 9 3 1 0 0 > initial transponder 578000000 0 2 9 3 1 0 0 > initial transponder 666000000 0 2 9 3 1 0 0 > initial transponder 642000000 0 2 9 3 1 0 0 >>>> tune to: > 562000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE > __tune_to_transponder:1478: ERROR: FE_READ_STATUS failed: 5 Input/output error [...] > This is the dmesg: > > tda1004x: setting up plls for 48MHz sampling clock > tda1004x: found firmware revision 0 -- invalid > tda1004x: booting from eeprom > tda1004x: found firmware revision 0 -- invalid > tda1004x: firmware upload failed The above line says it all: firmware upload failed The card can't work without the corresponding firmware. > tda1004x: pll set failed > tda1004x: pll set failed That's why pll set failed ! [...] > > I do ./get_dvb_firmware tda10046 and then copy the file "dvb-fe-tda10046.fw" to > /usr/local/lib/firmware/ > But I didn't see any changes. > > Could you tell me where is my mistake? As Hartmut has posted, it's not your fault (mistake), but the 310i card is so different from the 300i that it needs a special driver just for this very card. > thanks > vince Regards, Rainer -- Rainer Schubert - Linux TV User Amateur Radio Call DL6HBO
