I will take a look when I am at home. Are you sure you have started the whole thing from fresh? It took my pi about 3 hours to compile ffmpeg I run straight from the command line and do not launch the desktop. What does pjsua show when you enter vid dev list from the cli? Does it show the webcam as device? I also use the rPi camera board so have not tested on a USB camera. thanks On 11 March 2015 at 14:36, Chirag Ajmera <chirag at ncc.co.in> wrote: > Dear Matt, > > No success starting fresh .. still the same problem > Kindly share the guide > > Also, let know if you are using Desktop (start-x) while running pjsua > sample .. cause I been trying things via ssh terminal and I boot to console > on start up ( Raspberry Pi ) > > Using Logitech camera via v4l2 ( vid_streamutil does work ) > > The camera led is not started at all when running pjsua sample > > Thanks > Chirag A. > > > On Wed, Mar 11, 2015 at 6:51 PM, Matt Broad <matt at supportedbusiness.com> > wrote: > >> If it does not work let me know and I will look at my notes. I made a >> step by step guide of each install I tried as I spent ALOT of time trying >> and failing to get video to work. >> >> thanks >> >> >> On 11 March 2015 at 13:19, Matt Broad <matt at supportedbusiness.com> wrote: >> >>> No Problem, I found that I had to remove the pjsip folder from an >>> earlier attempt and start that stage again before it would compile >>> correctly. >>> I must stress that ffmpg cannot be a higher version than 1.2.6. I tried >>> and it will not work, I used 1.2.6 and it worked fine :) >>> >>> >>> thanks >>> Matt >>> >>> On 11 March 2015 at 13:10, Chirag Ajmera <chirag at ncc.co.in> wrote: >>> >>>> Dear Matt, >>>> >>>> Thank you very much for the prompt response ! Help Appreciated >>>> >>>> I followed the instructions on an existing image but no luck. >>>> >>>> Have started fresh, will post update soon >>>> >>>> Thanks >>>> Best, >>>> Chirag A. >>>> >>>> >>>> On Tue, Mar 10, 2015 at 7:08 PM, Matt Broad <matt at supportedbusiness.com >>>> > wrote: >>>> >>>>> are you running pjsua with --video or are you using "vid enable". I >>>>> was unable to get this to work on the RpiB using Openh264 and after >>>>> following some steps form another user on this list was able to get video >>>>> working. >>>>> >>>>> in a nutshell you need to: >>>>> install x264 >>>>> $ apt-get install x264 libx264-dev >>>>> >>>>> download and install ssl (not mandatory) >>>>> $ apt-get install openssl >>>>> $ apt-get install libssl-dev >>>>> >>>>> download and compile sdl2 (I tried the pre compiled version but this >>>>> did not work so had to compile myself) >>>>> >>>>> download and compile ffmpeg 1.2.6 (this will take a few hours so make >>>>> yourself a big cup of tea) >>>>> >>>>> $ ./configure --enable-shared --disable-static --enable-memalign-hack >>>>> --enable-gpl --enable-libx264 >>>>> $ make && make install >>>>> >>>>> create file pjproject-2.2.1/pjlib/include/pj/config_site.h >>>>> add the following line and save >>>>> #define PJMEDIA_HAS_VIDEO 1 >>>>> >>>>> download and compile pjproject (add parameters to ./configure if you >>>>> do not want ssl) >>>>> ./configure && make && make install >>>>> >>>>> launch pjsua with --video >>>>> or you could use the following >>>>> pjsua --video --log-level=5 --add-codec=G722 --auto-answer=200 >>>>> --no-vad --ec-tail 0 --playback-dev=0 >>>>> >>>>> credit to Silvio for these steps >>>>> >>>>> thanks >>>>> Matt >>>>> >>>>> On 10 March 2015 at 07:41, Chirag Ajmera <chirag at ncc.co.in> wrote: >>>>> >>>>>> Kindly can anyone please guide on the below, I have been trying to >>>>>> get video working on Arm based boards since last 6 months but no success ! >>>>>> Compilation has been successful w/o error & vid_streamutil also works >>>>>> >>>>>> *Issue - Video is Inactive ( camera does not start during a call >>>>>> pjsua, but streams with vid_streamutil app )* >>>>>> Platform - Raspberry Pi 2 with Asterisk SIP Server >>>>>> PJSIP - v2.3 compiled from source omitting openH264 & libyuv >>>>>> >>>>>> Below is the call disconnection message *( PJSU DEMO APP )* >>>>>> >>>>>> ----------------------------------------------------------------------------------------- >>>>>> >>>>>> 13:03:20.813 pjsua_aud.c ..Conf connect: 2 --> 0 >>>>>> 13:03:20.813 pjsua_aud.c ...Set sound device: capture=-1, >>>>>> playback=-2 >>>>>> 13:03:20.814 pjsua_app.c ....Turning sound device ON >>>>>> 13:03:20.814 pjsua_aud.c ....Opening sound device PCM at 16000 >>>>>> /1/20ms >>>>>> 13:03:20.838 ec0x21540e8 .....AEC created, clock_rate=16000, >>>>>> channel=1, samples per frame=320, tail length=200 ms, latency=0 ms >>>>>> 13:03:20.839 conference.c !...Port 2 (ring) transmitting to port 0 >>>>>> (default:CARD=U0x46d0x81b) >>>>>> 13:03:20.839 pjsua_call.c ..Answering call 0: code=200 >>>>>> 13:03:20.839 pjsua_media.c .....Call 0: updating media.. >>>>>> 13:03:20.840 pjsua_aud.c !......Audio channel update.. >>>>>> 13:03:20.840 strm0x217f604 !.......VAD temporarily disabled >>>>>> 13:03:20.842 strm0x217f604 .......Encoder stream started >>>>>> 13:03:20.842 strm0x217f604 .......Decoder stream started >>>>>> 13:03:20.842 pjsua_media.c ......Audio updated, stream #0: PCMU >>>>>> (sendrecv) >>>>>> 13:03:20.842 pjsua_vid.c ......Video channel update.. >>>>>> 13:03:20.863 vstenc0x2183c5 .......Encoder stream started >>>>>> 13:03:20.863 vstdec0x2183c5 .......Decoder stream started >>>>>> 13:03:20.864 pjsua_vid.c .......Setting up RX.. >>>>>> 13:03:20.864 pjsua_vid.c ........Creating video window: >>>>>> type=stream, cap_id=-1, rend_id=0 >>>>>> 13:03:20.864 pjsua_vid.c .........Window 0: destroying.. >>>>>> *13:03:20.864 pjsua_media.c ......pjsua_vid_channel_update() failed >>>>>> for call_id 0 media 1: Invalid video device (PJMEDIA_EVID_INVDEV)* >>>>>> 13:03:20.864 pjsua_app.c .....Call 0 media 0 [type=audio], status >>>>>> is Active >>>>>> 13:03:20.864 pjsua_aud.c .....Conf disconnect: 2 -x- 0 >>>>>> 13:03:20.864 conference.c ......Port 2 (ring) stop transmitting to >>>>>> port 0 (default:CARD=U0x46d0x81b) >>>>>> 13:03:20.865 pjsua_aud.c .....Conf connect: 3 --> 0 >>>>>> 13:03:20.865 conference.c ......Port 3 (sip:1004 at 192.168.1.190) >>>>>> transmitting to port 0 (default:CARD=U0x46d0x81b) >>>>>> 13:03:20.865 pjsua_aud.c .....Conf connect: 0 --> 3 >>>>>> 13:03:20.865 conference.c ......Port 0 (default:CARD=U0x46d0x81b) >>>>>> transmitting to port 3 (sip:1004 at 192.168.1.190) >>>>>> 13:03:20.865 pjsua_app.c .....Call 0 media 1 [type=video], status >>>>>> is None >>>>>> 13:03:20.865 pjsua_app.c .....Just rejected incoming video offer >>>>>> on call 0, use "vid call enable 1" or "vid call add" to enable video! >>>>>> 13:03:20.865 pjsua_core.c ......TX 1032 bytes Response msg >>>>>> 200/INVITE/cseq=102 (tdta0x214a428) to UDP 192.168.1.190:5060: >>>>>> SIP/2.0 200 OK >>>>>> Via: SIP/2.0/UDP 192.168.1.190:5060 >>>>>> ;rport=5060;received=192.168.1.190;branch=z9hG4bK5aac1fe4 >>>>>> Call-ID: 6f30ba0b4fc6117d07745c7a2aeaa3a6 at 192.168.1.190:5060 >>>>>> From: "1004" <sip:1004@192.168.1.190>;tag=as16d63286 >>>>>> To: <sip:1001 at 192.168.1.190 >>>>>> ;ob>;tag=fb79d2ca-876b-44eb-851d-533a590e3289 >>>>>> CSeq: 102 INVITE >>>>>> Contact: <sip:1001 at 192.168.1.190:5090;ob> >>>>>> Allow: PRACK, INVITE, ACK, BYE, CANCEL, UPDATE, INFO, SUBSCRIBE, >>>>>> NOTIFY, REFER, MESSAGE, OPTIONS >>>>>> Supported: replaces, 100rel, timer, norefersub >>>>>> Content-Type: application/sdp >>>>>> Content-Length: 469 >>>>>> >>>>>> v=0 >>>>>> o=- 3634961600 3634961601 IN IP4 192.168.1.190 >>>>>> s=pjmedia >>>>>> b=AS:352 >>>>>> t=0 0 >>>>>> a=X-nat:0 >>>>>> m=audio 4000 RTP/AVP 0 101 >>>>>> c=IN IP4 192.168.1.190 >>>>>> b=TIAS:64000 >>>>>> a=rtcp:4001 IN IP4 192.168.1.190 >>>>>> a=sendrecv >>>>>> a=rtpmap:0 PCMU/8000 >>>>>> a=rtpmap:101 telephone-event/8000 >>>>>> a=fmtp:101 0-16 >>>>>> m=video 4002 RTP/AVP 99 >>>>>> c=IN IP4 192.168.1.190 >>>>>> b=TIAS:256000 >>>>>> a=rtcp:4003 IN IP4 192.168.1.190 >>>>>> a=sendrecv >>>>>> a=rtpmap:99 H264/90000 >>>>>> a=fmtp:99 profile-level-id=428014; packetization-mode=0 >>>>>> >>>>>> --end msg-- >>>>>> 13:03:20.868 pjsua_app.c .........Call 0 state changed to >>>>>> CONNECTING >>>>>> 13:03:20.869 pjsua_core.c .RX 433 bytes Request msg ACK/cseq=102 >>>>>> (rdata0x21379ac) from UDP 192.168.1.190:5060: >>>>>> ACK sip:1001 at 192.168.1.190:5090;ob SIP/2.0 >>>>>> Via: SIP/2.0/UDP 192.168.1.190:5060;branch=z9hG4bK4dfc06e3;rport >>>>>> Max-Forwards: 70 >>>>>> From: "1004" <sip:1004@192.168.1.190>;tag=as16d63286 >>>>>> To: <sip:1001 at 192.168.1.190:5090 >>>>>> ;ob>;tag=fb79d2ca-876b-44eb-851d-533a590e3289 >>>>>> Contact: <sip:1004 at 192.168.1.190:5060> >>>>>> Call-ID: 6f30ba0b4fc6117d07745c7a2aeaa3a6 at 192.168.1.190:5060 >>>>>> CSeq: 102 ACK >>>>>> User-Agent: FPBX-12.0.43(13.2.0) >>>>>> Content-Length: 0 >>>>>> >>>>>> >>>>>> --end msg-- >>>>>> 13:03:20.869 pjsua_app.c ...Call 0 state changed to CONFIRMED >>>>>> 13:03:20.884 Master/sound Underflow, buf_cnt=0, will generate 1 >>>>>> frame >>>>>> 13:03:21.084 Master/sound Underflow, buf_cnt=0, will generate 1 >>>>>> frame >>>>>> 13:03:21.148 openh264.cpp Frame size changed: 720x480 --> 352x288 >>>>>> 13:03:21.504 strm0x217f604 VAD re-enabled >>>>>> 13:03:29.484 sound_port.c EC suspended because of inactivity >>>>>> 13:03:30.280 pjsua_core.c .RX 466 bytes Request msg BYE/cseq=103 >>>>>> (rdata0x21379ac) from UDP 192.168.1.190:5060: >>>>>> BYE sip:1001 at 192.168.1.190:5090;ob SIP/2.0 >>>>>> Via: SIP/2.0/UDP 192.168.1.190:5060;branch=z9hG4bK02497827;rport >>>>>> Max-Forwards: 70 >>>>>> From: "1004" <sip:1004@192.168.1.190>;tag=as16d63286 >>>>>> To: <sip:1001 at 192.168.1.190:5090 >>>>>> ;ob>;tag=fb79d2ca-876b-44eb-851d-533a590e3289 >>>>>> Call-ID: 6f30ba0b4fc6117d07745c7a2aeaa3a6 at 192.168.1.190:5060 >>>>>> CSeq: 103 BYE >>>>>> User-Agent: FPBX-12.0.43(13.2.0) >>>>>> X-Asterisk-HangupCause: Normal Clearing >>>>>> X-Asterisk-HangupCauseCode: 16 >>>>>> Content-Length: 0 >>>>>> >>>>>> >>>>>> --end msg-- >>>>>> 13:03:30.281 pjsua_core.c .......TX 337 bytes Response msg >>>>>> 200/BYE/cseq=103 (tdta0x222b5f0) to UDP 192.168.1.190:5060: >>>>>> SIP/2.0 200 OK >>>>>> Via: SIP/2.0/UDP 192.168.1.190:5060 >>>>>> ;rport=5060;received=192.168.1.190;branch=z9hG4bK02497827 >>>>>> Call-ID: 6f30ba0b4fc6117d07745c7a2aeaa3a6 at 192.168.1.190:5060 >>>>>> From: "1004" <sip:1004@192.168.1.190>;tag=as16d63286 >>>>>> To: <sip:1001 at 192.168.1.190 >>>>>> ;ob>;tag=fb79d2ca-876b-44eb-851d-533a590e3289 >>>>>> CSeq: 103 BYE >>>>>> Content-Length: 0 >>>>>> >>>>>> >>>>>> --end msg-- >>>>>> 13:03:30.281 pjsua_app.c ......Call 0 is DISCONNECTED [reason=200 >>>>>> (Normal call clearing)] >>>>>> 13:03:30.282 pjsua_app_comm ...... >>>>>> [DISCONNCTD] To: "1004" <sip:1004 at 192.168.1.190>;tag=as16d63286 >>>>>> Call time: 00h:00m:09s, 1st res in 31 ms, conn in 61ms >>>>>> #0 audio PCMU @8kHz, sendrecv, peer=192.168.1.190:11686 >>>>>> SRTP status: Not active Crypto-suite: >>>>>> RX pt=0, last update:00h:00m:00.126s ago >>>>>> total 466pkt 74.5KB (93.2KB +IP hdr) @avg=63.1Kbps/78.9Kbps >>>>>> pkt loss=0 (0.0%), discrd=0 (0.0%), dup=0 (0.0%), reord=0 >>>>>> (0.0%) >>>>>> (msec) min avg max last dev >>>>>> loss period: 0.000 0.000 0.000 0.000 0.000 >>>>>> jitter : 0.000 1.774 5.875 2.125 1.593 >>>>>> TX pt=0, ptime=20, last update:00h:00m:04.393s ago >>>>>> total 172pkt 27.5KB (34.4KB +IP hdr) @avg=23.3Kbps/29.1Kbps >>>>>> pkt loss=0 (0.0%), dup=0 (0.0%), reorder=0 (0.0%) >>>>>> (msec) min avg max last dev >>>>>> loss period: 0.000 0.000 0.000 0.000 0.000 >>>>>> jitter : 15.875 15.875 15.875 15.875 0.000 >>>>>> RTT msec : 1.037 1.037 1.037 1.037 0.000 >>>>>> * #1 video H264, inactive, peer=192.168.1.190:13954 >>>>>> <http://192.168.1.190:13954>* >>>>>> * SRTP status: Not active Crypto-suite: * >>>>>> RX last update:00h:00m:09.153s ago >>>>>> total 944pkt 1.07MB (1.11MB +IP hdr) >>>>>> @avg=911.4Kbps/943.5Kbps >>>>>> pkt loss=0 (0.0%), discrd=0 (0.0%), dup=0 (0.0%), reord=0 >>>>>> (0.0%) >>>>>> (msec) min avg max last dev >>>>>> loss period: 0.000 0.000 0.000 0.000 0.000 >>>>>> jitter : 0.011 1.038 3.211 1.566 0.769 >>>>>> * TX last update:never* >>>>>> * total 0pkt 0B (0B +IP hdr) @avg=0bps/0bps* >>>>>> * pkt loss=0 (0.0%), dup=0 (0.0%), reorder=0 (0.0%)* >>>>>> * (msec) min avg max last dev * >>>>>> * loss period: 0.000 0.000 0.000 0.000 0.000* >>>>>> * jitter : 0.000 0.000 0.000 0.000 0.000* >>>>>> RTT msec : 0.000 0.000 0.000 0.000 0.000 >>>>>> 13:03:30.282 pjsua_media.c ......Call 0: deinitializing media.. >>>>>> 13:03:30.283 pjsua_media.c ........Media stream call00:0 is >>>>>> destroyed >>>>>> 13:03:30.283 pjsua_vid.c ........Stopping video stream.. >>>>>> 13:03:30.287 pjsua_media.c ........Media stream call00:1 is >>>>>> destroyed >>>>>> 13:03:31.282 pjsua_aud.c Closing sound device after idle for 1 >>>>>> second(s) >>>>>> 13:03:31.282 pjsua_app.c .Turning sound device OFF >>>>>> 13:03:31.283 pjsua_aud.c .Closing default:CARD=ALSA sound >>>>>> playback device and default:CARD=U0x46d0x81b sound capture device >>>>>> >>>>>> >>>>>> ----------------------------------------------------------------------------------------- >>>>>> *VID_STREAMUTIL OUTPUT ( Streams the VIDEO )* >>>>>> >>>>>> sudo ./vid_streamutil --send-only --remote=192.168.1.191:4000 >>>>>> 12:45:18.016 os_core_unix.c !pjlib 2.3 for POSIX initialized >>>>>> 12:45:18.121 alsa_dev.c Added sound device default:CARD=ALSA >>>>>> 12:45:18.124 alsa_dev.c Added sound device sysdefault:CARD=ALSA >>>>>> 12:45:18.146 alsa_dev.c Added sound device >>>>>> default:CARD=U0x46d0x81b >>>>>> 12:45:18.163 alsa_dev.c Added sound device >>>>>> sysdefault:CARD=U0x46d0x81b >>>>>> 12:45:18.168 alsa_dev.c Added sound device >>>>>> front:CARD=U0x46d0x81b,DEV=0 >>>>>> 12:45:18.174 alsa_dev.c Added sound device >>>>>> surround40:CARD=U0x46d0x81b,DEV=0 >>>>>> 12:45:18.179 alsa_dev.c Added sound device >>>>>> surround41:CARD=U0x46d0x81b,DEV=0 >>>>>> 12:45:18.183 alsa_dev.c Added sound device >>>>>> surround50:CARD=U0x46d0x81b,DEV=0 >>>>>> 12:45:18.192 alsa_dev.c Added sound device >>>>>> surround51:CARD=U0x46d0x81b,DEV=0 >>>>>> 12:45:18.197 alsa_dev.c Added sound device >>>>>> surround71:CARD=U0x46d0x81b,DEV=0 >>>>>> 12:45:18.203 alsa_dev.c Added sound device >>>>>> iec958:CARD=U0x46d0x81b,DEV=0 >>>>>> 12:45:18.203 alsa_dev.c ALSA driver found 11 devices >>>>>> 12:45:18.204 alsa_dev.c ALSA initialized >>>>>> 12:45:18.253 pa_dev.c PortAudio sound library initialized, >>>>>> status=0 >>>>>> 12:45:18.253 pa_dev.c PortAudio host api count=2 >>>>>> 12:45:18.253 pa_dev.c Sound device count=6 >>>>>> 12:45:18.253 pjlib select() I/O Queue created (0x1d698ec) >>>>>> 12:45:18.257 v4l2_dev.c Found capture device UVC Camera >>>>>> (046d:081b) >>>>>> 12:45:18.257 v4l2_dev.c Enumerating formats: >>>>>> 12:45:18.257 v4l2_dev.c Supported: YUV 4:2:2 (YUYV) >>>>>> 12:45:18.258 v4l2_dev.c Unsupported: MJPEG >>>>>> 12:45:18.258 v4l2_dev.c Unsupported: RGB3 >>>>>> 12:45:18.258 v4l2_dev.c Supported: BGR3 >>>>>> 12:45:18.258 v4l2_dev.c Unsupported: YU12 >>>>>> 12:45:18.258 v4l2_dev.c Unsupported: YV12 >>>>>> 12:45:18.261 v4l2_dev.c Video4Linux2 has 1 devices >>>>>> 12:45:18.261 colorbar_dev.c Colorbar video src initialized with 1 >>>>>> device(s): >>>>>> 12:45:18.261 colorbar_dev.c 0: Colorbar generator >>>>>> 12:45:18.281 sdl_dev.c !SDL_Init() error: No available video >>>>>> device >>>>>> 12:45:18.282 openh264.cpp !OpenH264 codec initialized >>>>>> 12:45:18.282 vid_port.c Opening device UVC Camera (046d:081b) >>>>>> [v4l2] for capture: format=YUY2, size=720x480 @15:1 fps >>>>>> 12:45:18.338 v4l2_dev.c mmap streaming initialized >>>>>> 12:45:18.338 vid_port.c Device UVC Camera (046d:081b) [v4l2] >>>>>> opened: format=YUY2, size=640x480 @15:1 fps >>>>>> 12:45:18.341 openh264.cpp Opening codec.. >>>>>> 12:45:18.360 rtp.c pjmedia_rtp_session_init: ses=0x1d720c0, >>>>>> default_pt=97, ssrc=0x773f1b32 >>>>>> 12:45:18.361 vstdec0x74cc60 Decoding channel created 720x480 >>>>>> I420<-H264 22/1(~22)fps >>>>>> 12:45:18.361 rtp.c pjmedia_rtp_session_init: ses=0x1d72154, >>>>>> default_pt=97, ssrc=0x773f1b32 >>>>>> 12:45:18.361 vstenc0x74cc60 Encoding channel created 720x480 >>>>>> I420->H264 15/1(~15)fps >>>>>> 12:45:18.361 udp0x1d75a58 SO_RCVBUF set to 163840 >>>>>> 12:45:18.361 udp0x1d75a58 SO_SNDBUF set to 163840 >>>>>> 12:45:18.362 vid_stream.c Video stream vstrm0x74cc607c created >>>>>> 12:45:18.362 vstenc0x74cc60 Encoder stream started >>>>>> 12:45:18.362 vstdec0x74cc60 Decoder stream paused >>>>>> 12:45:18.362 v4l2_dev.c Starting v4l2 video stream UVC Camera >>>>>> (046d:081b) >>>>>> Stream is active, dir is send-only, sending to 192.168.1.91:4000 >>>>>> 12:45:18.373 vid_streamutil Sending 720x480 H264 @15.00fps >>>>>> >>>>>> Commands: >>>>>> q Quit >>>>>> >>>>>> Command: q >>>>>> 12:45:40.115 v4l2_dev.c Stopping v4l2 video stream UVC Camera >>>>>> (046d:081b) >>>>>> 12:45:40.116 vid_port.c Closing UVC Camera (046d:081b).. >>>>>> 12:45:40.116 v4l2_dev.c Stopping v4l2 video stream UVC Camera >>>>>> (046d:081b) >>>>>> 12:45:40.117 v4l2_dev.c Destroying v4l2 video stream UVC Camera >>>>>> (046d:081b) >>>>>> 12:45:40.123 vstdec0x74cc60 JB summary: >>>>>> size=0/eff=0 prefetch=0 level=0 >>>>>> delay (min/max/avg/dev)=0/0/0/0 ms >>>>>> burst (min/max/avg/dev)=0/0/0/0 frames >>>>>> lost=0 discard=0 empty=0 >>>>>> 12:45:40.281 pa_dev.c PortAudio sound library shutting down.. >>>>>> >>>>>> >>>>>> ----------------------------------------------------------------------------------------- >>>>>> >>>>>> Thank You >>>>>> Best, >>>>>> Chirag A. >>>>>> >>>>>> _______________________________________________ >>>>>> Visit our blog: http://blog.pjsip.org >>>>>> >>>>>> pjsip mailing list >>>>>> pjsip at lists.pjsip.org >>>>>> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >>>>>> >>>>>> >>>>> >>>>> _______________________________________________ >>>>> Visit our blog: http://blog.pjsip.org >>>>> >>>>> pjsip mailing list >>>>> pjsip at lists.pjsip.org >>>>> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> Visit our blog: http://blog.pjsip.org >>>> >>>> pjsip mailing list >>>> pjsip at lists.pjsip.org >>>> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >>>> >>>> >>> >> >> _______________________________________________ >> Visit our blog: http://blog.pjsip.org >> >> pjsip mailing list >> pjsip at lists.pjsip.org >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20150311/40a60ced/attachment.html>
