No Problem, I found that I had to remove the pjsip folder from an earlier attempt and start that stage again before it would compile correctly. I must stress that ffmpg cannot be a higher version than 1.2.6. I tried and it will not work, I used 1.2.6 and it worked fine :) thanks Matt On 11 March 2015 at 13:10, Chirag Ajmera <chirag at ncc.co.in> wrote: > Dear Matt, > > Thank you very much for the prompt response ! Help Appreciated > > I followed the instructions on an existing image but no luck. > > Have started fresh, will post update soon > > Thanks > Best, > Chirag A. > > > On Tue, Mar 10, 2015 at 7:08 PM, Matt Broad <matt at supportedbusiness.com> > wrote: > >> are you running pjsua with --video or are you using "vid enable". I was >> unable to get this to work on the RpiB using Openh264 and after following >> some steps form another user on this list was able to get video working. >> >> in a nutshell you need to: >> install x264 >> $ apt-get install x264 libx264-dev >> >> download and install ssl (not mandatory) >> $ apt-get install openssl >> $ apt-get install libssl-dev >> >> download and compile sdl2 (I tried the pre compiled version but this did >> not work so had to compile myself) >> >> download and compile ffmpeg 1.2.6 (this will take a few hours so make >> yourself a big cup of tea) >> >> $ ./configure --enable-shared --disable-static --enable-memalign-hack >> --enable-gpl --enable-libx264 >> $ make && make install >> >> create file pjproject-2.2.1/pjlib/include/pj/config_site.h >> add the following line and save >> #define PJMEDIA_HAS_VIDEO 1 >> >> download and compile pjproject (add parameters to ./configure if you do >> not want ssl) >> ./configure && make && make install >> >> launch pjsua with --video >> or you could use the following >> pjsua --video --log-level=5 --add-codec=G722 --auto-answer=200 --no-vad >> --ec-tail 0 --playback-dev=0 >> >> credit to Silvio for these steps >> >> thanks >> Matt >> >> On 10 March 2015 at 07:41, Chirag Ajmera <chirag at ncc.co.in> wrote: >> >>> Kindly can anyone please guide on the below, I have been trying to get >>> video working on Arm based boards since last 6 months but no success ! >>> Compilation has been successful w/o error & vid_streamutil also works >>> >>> *Issue - Video is Inactive ( camera does not start during a call pjsua, >>> but streams with vid_streamutil app )* >>> Platform - Raspberry Pi 2 with Asterisk SIP Server >>> PJSIP - v2.3 compiled from source omitting openH264 & libyuv >>> >>> Below is the call disconnection message *( PJSU DEMO APP )* >>> >>> ----------------------------------------------------------------------------------------- >>> >>> 13:03:20.813 pjsua_aud.c ..Conf connect: 2 --> 0 >>> 13:03:20.813 pjsua_aud.c ...Set sound device: capture=-1, playback=-2 >>> 13:03:20.814 pjsua_app.c ....Turning sound device ON >>> 13:03:20.814 pjsua_aud.c ....Opening sound device PCM at 16000/1/20ms >>> 13:03:20.838 ec0x21540e8 .....AEC created, clock_rate=16000, >>> channel=1, samples per frame=320, tail length=200 ms, latency=0 ms >>> 13:03:20.839 conference.c !...Port 2 (ring) transmitting to port 0 >>> (default:CARD=U0x46d0x81b) >>> 13:03:20.839 pjsua_call.c ..Answering call 0: code=200 >>> 13:03:20.839 pjsua_media.c .....Call 0: updating media.. >>> 13:03:20.840 pjsua_aud.c !......Audio channel update.. >>> 13:03:20.840 strm0x217f604 !.......VAD temporarily disabled >>> 13:03:20.842 strm0x217f604 .......Encoder stream started >>> 13:03:20.842 strm0x217f604 .......Decoder stream started >>> 13:03:20.842 pjsua_media.c ......Audio updated, stream #0: PCMU >>> (sendrecv) >>> 13:03:20.842 pjsua_vid.c ......Video channel update.. >>> 13:03:20.863 vstenc0x2183c5 .......Encoder stream started >>> 13:03:20.863 vstdec0x2183c5 .......Decoder stream started >>> 13:03:20.864 pjsua_vid.c .......Setting up RX.. >>> 13:03:20.864 pjsua_vid.c ........Creating video window: type=stream, >>> cap_id=-1, rend_id=0 >>> 13:03:20.864 pjsua_vid.c .........Window 0: destroying.. >>> *13:03:20.864 pjsua_media.c ......pjsua_vid_channel_update() failed >>> for call_id 0 media 1: Invalid video device (PJMEDIA_EVID_INVDEV)* >>> 13:03:20.864 pjsua_app.c .....Call 0 media 0 [type=audio], status is >>> Active >>> 13:03:20.864 pjsua_aud.c .....Conf disconnect: 2 -x- 0 >>> 13:03:20.864 conference.c ......Port 2 (ring) stop transmitting to >>> port 0 (default:CARD=U0x46d0x81b) >>> 13:03:20.865 pjsua_aud.c .....Conf connect: 3 --> 0 >>> 13:03:20.865 conference.c ......Port 3 (sip:1004 at 192.168.1.190) >>> transmitting to port 0 (default:CARD=U0x46d0x81b) >>> 13:03:20.865 pjsua_aud.c .....Conf connect: 0 --> 3 >>> 13:03:20.865 conference.c ......Port 0 (default:CARD=U0x46d0x81b) >>> transmitting to port 3 (sip:1004 at 192.168.1.190) >>> 13:03:20.865 pjsua_app.c .....Call 0 media 1 [type=video], status is >>> None >>> 13:03:20.865 pjsua_app.c .....Just rejected incoming video offer on >>> call 0, use "vid call enable 1" or "vid call add" to enable video! >>> 13:03:20.865 pjsua_core.c ......TX 1032 bytes Response msg >>> 200/INVITE/cseq=102 (tdta0x214a428) to UDP 192.168.1.190:5060: >>> SIP/2.0 200 OK >>> Via: SIP/2.0/UDP 192.168.1.190:5060 >>> ;rport=5060;received=192.168.1.190;branch=z9hG4bK5aac1fe4 >>> Call-ID: 6f30ba0b4fc6117d07745c7a2aeaa3a6 at 192.168.1.190:5060 >>> From: "1004" <sip:1004@192.168.1.190>;tag=as16d63286 >>> To: <sip:1001 at 192.168.1.190;ob>;tag=fb79d2ca-876b-44eb-851d-533a590e3289 >>> CSeq: 102 INVITE >>> Contact: <sip:1001 at 192.168.1.190:5090;ob> >>> Allow: PRACK, INVITE, ACK, BYE, CANCEL, UPDATE, INFO, SUBSCRIBE, NOTIFY, >>> REFER, MESSAGE, OPTIONS >>> Supported: replaces, 100rel, timer, norefersub >>> Content-Type: application/sdp >>> Content-Length: 469 >>> >>> v=0 >>> o=- 3634961600 3634961601 IN IP4 192.168.1.190 >>> s=pjmedia >>> b=AS:352 >>> t=0 0 >>> a=X-nat:0 >>> m=audio 4000 RTP/AVP 0 101 >>> c=IN IP4 192.168.1.190 >>> b=TIAS:64000 >>> a=rtcp:4001 IN IP4 192.168.1.190 >>> a=sendrecv >>> a=rtpmap:0 PCMU/8000 >>> a=rtpmap:101 telephone-event/8000 >>> a=fmtp:101 0-16 >>> m=video 4002 RTP/AVP 99 >>> c=IN IP4 192.168.1.190 >>> b=TIAS:256000 >>> a=rtcp:4003 IN IP4 192.168.1.190 >>> a=sendrecv >>> a=rtpmap:99 H264/90000 >>> a=fmtp:99 profile-level-id=428014; packetization-mode=0 >>> >>> --end msg-- >>> 13:03:20.868 pjsua_app.c .........Call 0 state changed to CONNECTING >>> 13:03:20.869 pjsua_core.c .RX 433 bytes Request msg ACK/cseq=102 >>> (rdata0x21379ac) from UDP 192.168.1.190:5060: >>> ACK sip:1001 at 192.168.1.190:5090;ob SIP/2.0 >>> Via: SIP/2.0/UDP 192.168.1.190:5060;branch=z9hG4bK4dfc06e3;rport >>> Max-Forwards: 70 >>> From: "1004" <sip:1004@192.168.1.190>;tag=as16d63286 >>> To: <sip:1001 at 192.168.1.190:5090 >>> ;ob>;tag=fb79d2ca-876b-44eb-851d-533a590e3289 >>> Contact: <sip:1004 at 192.168.1.190:5060> >>> Call-ID: 6f30ba0b4fc6117d07745c7a2aeaa3a6 at 192.168.1.190:5060 >>> CSeq: 102 ACK >>> User-Agent: FPBX-12.0.43(13.2.0) >>> Content-Length: 0 >>> >>> >>> --end msg-- >>> 13:03:20.869 pjsua_app.c ...Call 0 state changed to CONFIRMED >>> 13:03:20.884 Master/sound Underflow, buf_cnt=0, will generate 1 frame >>> 13:03:21.084 Master/sound Underflow, buf_cnt=0, will generate 1 frame >>> 13:03:21.148 openh264.cpp Frame size changed: 720x480 --> 352x288 >>> 13:03:21.504 strm0x217f604 VAD re-enabled >>> 13:03:29.484 sound_port.c EC suspended because of inactivity >>> 13:03:30.280 pjsua_core.c .RX 466 bytes Request msg BYE/cseq=103 >>> (rdata0x21379ac) from UDP 192.168.1.190:5060: >>> BYE sip:1001 at 192.168.1.190:5090;ob SIP/2.0 >>> Via: SIP/2.0/UDP 192.168.1.190:5060;branch=z9hG4bK02497827;rport >>> Max-Forwards: 70 >>> From: "1004" <sip:1004@192.168.1.190>;tag=as16d63286 >>> To: <sip:1001 at 192.168.1.190:5090 >>> ;ob>;tag=fb79d2ca-876b-44eb-851d-533a590e3289 >>> Call-ID: 6f30ba0b4fc6117d07745c7a2aeaa3a6 at 192.168.1.190:5060 >>> CSeq: 103 BYE >>> User-Agent: FPBX-12.0.43(13.2.0) >>> X-Asterisk-HangupCause: Normal Clearing >>> X-Asterisk-HangupCauseCode: 16 >>> Content-Length: 0 >>> >>> >>> --end msg-- >>> 13:03:30.281 pjsua_core.c .......TX 337 bytes Response msg >>> 200/BYE/cseq=103 (tdta0x222b5f0) to UDP 192.168.1.190:5060: >>> SIP/2.0 200 OK >>> Via: SIP/2.0/UDP 192.168.1.190:5060 >>> ;rport=5060;received=192.168.1.190;branch=z9hG4bK02497827 >>> Call-ID: 6f30ba0b4fc6117d07745c7a2aeaa3a6 at 192.168.1.190:5060 >>> From: "1004" <sip:1004@192.168.1.190>;tag=as16d63286 >>> To: <sip:1001 at 192.168.1.190;ob>;tag=fb79d2ca-876b-44eb-851d-533a590e3289 >>> CSeq: 103 BYE >>> Content-Length: 0 >>> >>> >>> --end msg-- >>> 13:03:30.281 pjsua_app.c ......Call 0 is DISCONNECTED [reason=200 >>> (Normal call clearing)] >>> 13:03:30.282 pjsua_app_comm ...... >>> [DISCONNCTD] To: "1004" <sip:1004 at 192.168.1.190>;tag=as16d63286 >>> Call time: 00h:00m:09s, 1st res in 31 ms, conn in 61ms >>> #0 audio PCMU @8kHz, sendrecv, peer=192.168.1.190:11686 >>> SRTP status: Not active Crypto-suite: >>> RX pt=0, last update:00h:00m:00.126s ago >>> total 466pkt 74.5KB (93.2KB +IP hdr) @avg=63.1Kbps/78.9Kbps >>> pkt loss=0 (0.0%), discrd=0 (0.0%), dup=0 (0.0%), reord=0 >>> (0.0%) >>> (msec) min avg max last dev >>> loss period: 0.000 0.000 0.000 0.000 0.000 >>> jitter : 0.000 1.774 5.875 2.125 1.593 >>> TX pt=0, ptime=20, last update:00h:00m:04.393s ago >>> total 172pkt 27.5KB (34.4KB +IP hdr) @avg=23.3Kbps/29.1Kbps >>> pkt loss=0 (0.0%), dup=0 (0.0%), reorder=0 (0.0%) >>> (msec) min avg max last dev >>> loss period: 0.000 0.000 0.000 0.000 0.000 >>> jitter : 15.875 15.875 15.875 15.875 0.000 >>> RTT msec : 1.037 1.037 1.037 1.037 0.000 >>> * #1 video H264, inactive, peer=192.168.1.190:13954 >>> <http://192.168.1.190:13954>* >>> * SRTP status: Not active Crypto-suite: * >>> RX last update:00h:00m:09.153s ago >>> total 944pkt 1.07MB (1.11MB +IP hdr) @avg=911.4Kbps/943.5Kbps >>> pkt loss=0 (0.0%), discrd=0 (0.0%), dup=0 (0.0%), reord=0 >>> (0.0%) >>> (msec) min avg max last dev >>> loss period: 0.000 0.000 0.000 0.000 0.000 >>> jitter : 0.011 1.038 3.211 1.566 0.769 >>> * TX last update:never* >>> * total 0pkt 0B (0B +IP hdr) @avg=0bps/0bps* >>> * pkt loss=0 (0.0%), dup=0 (0.0%), reorder=0 (0.0%)* >>> * (msec) min avg max last dev * >>> * loss period: 0.000 0.000 0.000 0.000 0.000* >>> * jitter : 0.000 0.000 0.000 0.000 0.000* >>> RTT msec : 0.000 0.000 0.000 0.000 0.000 >>> 13:03:30.282 pjsua_media.c ......Call 0: deinitializing media.. >>> 13:03:30.283 pjsua_media.c ........Media stream call00:0 is destroyed >>> 13:03:30.283 pjsua_vid.c ........Stopping video stream.. >>> 13:03:30.287 pjsua_media.c ........Media stream call00:1 is destroyed >>> 13:03:31.282 pjsua_aud.c Closing sound device after idle for 1 >>> second(s) >>> 13:03:31.282 pjsua_app.c .Turning sound device OFF >>> 13:03:31.283 pjsua_aud.c .Closing default:CARD=ALSA sound playback >>> device and default:CARD=U0x46d0x81b sound capture device >>> >>> >>> ----------------------------------------------------------------------------------------- >>> *VID_STREAMUTIL OUTPUT ( Streams the VIDEO )* >>> >>> sudo ./vid_streamutil --send-only --remote=192.168.1.191:4000 >>> 12:45:18.016 os_core_unix.c !pjlib 2.3 for POSIX initialized >>> 12:45:18.121 alsa_dev.c Added sound device default:CARD=ALSA >>> 12:45:18.124 alsa_dev.c Added sound device sysdefault:CARD=ALSA >>> 12:45:18.146 alsa_dev.c Added sound device default:CARD=U0x46d0x81b >>> 12:45:18.163 alsa_dev.c Added sound device >>> sysdefault:CARD=U0x46d0x81b >>> 12:45:18.168 alsa_dev.c Added sound device >>> front:CARD=U0x46d0x81b,DEV=0 >>> 12:45:18.174 alsa_dev.c Added sound device >>> surround40:CARD=U0x46d0x81b,DEV=0 >>> 12:45:18.179 alsa_dev.c Added sound device >>> surround41:CARD=U0x46d0x81b,DEV=0 >>> 12:45:18.183 alsa_dev.c Added sound device >>> surround50:CARD=U0x46d0x81b,DEV=0 >>> 12:45:18.192 alsa_dev.c Added sound device >>> surround51:CARD=U0x46d0x81b,DEV=0 >>> 12:45:18.197 alsa_dev.c Added sound device >>> surround71:CARD=U0x46d0x81b,DEV=0 >>> 12:45:18.203 alsa_dev.c Added sound device >>> iec958:CARD=U0x46d0x81b,DEV=0 >>> 12:45:18.203 alsa_dev.c ALSA driver found 11 devices >>> 12:45:18.204 alsa_dev.c ALSA initialized >>> 12:45:18.253 pa_dev.c PortAudio sound library initialized, >>> status=0 >>> 12:45:18.253 pa_dev.c PortAudio host api count=2 >>> 12:45:18.253 pa_dev.c Sound device count=6 >>> 12:45:18.253 pjlib select() I/O Queue created (0x1d698ec) >>> 12:45:18.257 v4l2_dev.c Found capture device UVC Camera (046d:081b) >>> 12:45:18.257 v4l2_dev.c Enumerating formats: >>> 12:45:18.257 v4l2_dev.c Supported: YUV 4:2:2 (YUYV) >>> 12:45:18.258 v4l2_dev.c Unsupported: MJPEG >>> 12:45:18.258 v4l2_dev.c Unsupported: RGB3 >>> 12:45:18.258 v4l2_dev.c Supported: BGR3 >>> 12:45:18.258 v4l2_dev.c Unsupported: YU12 >>> 12:45:18.258 v4l2_dev.c Unsupported: YV12 >>> 12:45:18.261 v4l2_dev.c Video4Linux2 has 1 devices >>> 12:45:18.261 colorbar_dev.c Colorbar video src initialized with 1 >>> device(s): >>> 12:45:18.261 colorbar_dev.c 0: Colorbar generator >>> 12:45:18.281 sdl_dev.c !SDL_Init() error: No available video device >>> 12:45:18.282 openh264.cpp !OpenH264 codec initialized >>> 12:45:18.282 vid_port.c Opening device UVC Camera (046d:081b) >>> [v4l2] for capture: format=YUY2, size=720x480 @15:1 fps >>> 12:45:18.338 v4l2_dev.c mmap streaming initialized >>> 12:45:18.338 vid_port.c Device UVC Camera (046d:081b) [v4l2] >>> opened: format=YUY2, size=640x480 @15:1 fps >>> 12:45:18.341 openh264.cpp Opening codec.. >>> 12:45:18.360 rtp.c pjmedia_rtp_session_init: ses=0x1d720c0, >>> default_pt=97, ssrc=0x773f1b32 >>> 12:45:18.361 vstdec0x74cc60 Decoding channel created 720x480 I420<-H264 >>> 22/1(~22)fps >>> 12:45:18.361 rtp.c pjmedia_rtp_session_init: ses=0x1d72154, >>> default_pt=97, ssrc=0x773f1b32 >>> 12:45:18.361 vstenc0x74cc60 Encoding channel created 720x480 I420->H264 >>> 15/1(~15)fps >>> 12:45:18.361 udp0x1d75a58 SO_RCVBUF set to 163840 >>> 12:45:18.361 udp0x1d75a58 SO_SNDBUF set to 163840 >>> 12:45:18.362 vid_stream.c Video stream vstrm0x74cc607c created >>> 12:45:18.362 vstenc0x74cc60 Encoder stream started >>> 12:45:18.362 vstdec0x74cc60 Decoder stream paused >>> 12:45:18.362 v4l2_dev.c Starting v4l2 video stream UVC Camera >>> (046d:081b) >>> Stream is active, dir is send-only, sending to 192.168.1.91:4000 >>> 12:45:18.373 vid_streamutil Sending 720x480 H264 @15.00fps >>> >>> Commands: >>> q Quit >>> >>> Command: q >>> 12:45:40.115 v4l2_dev.c Stopping v4l2 video stream UVC Camera >>> (046d:081b) >>> 12:45:40.116 vid_port.c Closing UVC Camera (046d:081b).. >>> 12:45:40.116 v4l2_dev.c Stopping v4l2 video stream UVC Camera >>> (046d:081b) >>> 12:45:40.117 v4l2_dev.c Destroying v4l2 video stream UVC Camera >>> (046d:081b) >>> 12:45:40.123 vstdec0x74cc60 JB summary: >>> size=0/eff=0 prefetch=0 level=0 >>> delay (min/max/avg/dev)=0/0/0/0 ms >>> burst (min/max/avg/dev)=0/0/0/0 frames >>> lost=0 discard=0 empty=0 >>> 12:45:40.281 pa_dev.c PortAudio sound library shutting down.. >>> >>> >>> ----------------------------------------------------------------------------------------- >>> >>> Thank You >>> Best, >>> Chirag A. >>> >>> _______________________________________________ >>> Visit our blog: http://blog.pjsip.org >>> >>> pjsip mailing list >>> pjsip at lists.pjsip.org >>> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >>> >>> >> >> _______________________________________________ >> Visit our blog: http://blog.pjsip.org >> >> pjsip mailing list >> pjsip at lists.pjsip.org >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20150311/ea5d747c/attachment.html>
