sure thanks will keep it noted ... even I have compiled many version of ffmpeg ... :) ~C On Wed, Mar 11, 2015 at 6:49 PM, Matt Broad <matt at supportedbusiness.com> wrote: > No Problem, I found that I had to remove the pjsip folder from an earlier > attempt and start that stage again before it would compile correctly. > I must stress that ffmpg cannot be a higher version than 1.2.6. I tried > and it will not work, I used 1.2.6 and it worked fine :) > > > thanks > Matt > > On 11 March 2015 at 13:10, Chirag Ajmera <chirag at ncc.co.in> wrote: > >> Dear Matt, >> >> Thank you very much for the prompt response ! Help Appreciated >> >> I followed the instructions on an existing image but no luck. >> >> Have started fresh, will post update soon >> >> Thanks >> Best, >> Chirag A. >> >> >> On Tue, Mar 10, 2015 at 7:08 PM, Matt Broad <matt at supportedbusiness.com> >> wrote: >> >>> are you running pjsua with --video or are you using "vid enable". I >>> was unable to get this to work on the RpiB using Openh264 and after >>> following some steps form another user on this list was able to get video >>> working. >>> >>> in a nutshell you need to: >>> install x264 >>> $ apt-get install x264 libx264-dev >>> >>> download and install ssl (not mandatory) >>> $ apt-get install openssl >>> $ apt-get install libssl-dev >>> >>> download and compile sdl2 (I tried the pre compiled version but this did >>> not work so had to compile myself) >>> >>> download and compile ffmpeg 1.2.6 (this will take a few hours so make >>> yourself a big cup of tea) >>> >>> $ ./configure --enable-shared --disable-static --enable-memalign-hack >>> --enable-gpl --enable-libx264 >>> $ make && make install >>> >>> create file pjproject-2.2.1/pjlib/include/pj/config_site.h >>> add the following line and save >>> #define PJMEDIA_HAS_VIDEO 1 >>> >>> download and compile pjproject (add parameters to ./configure if you do >>> not want ssl) >>> ./configure && make && make install >>> >>> launch pjsua with --video >>> or you could use the following >>> pjsua --video --log-level=5 --add-codec=G722 --auto-answer=200 --no-vad >>> --ec-tail 0 --playback-dev=0 >>> >>> credit to Silvio for these steps >>> >>> thanks >>> Matt >>> >>> On 10 March 2015 at 07:41, Chirag Ajmera <chirag at ncc.co.in> wrote: >>> >>>> Kindly can anyone please guide on the below, I have been trying to get >>>> video working on Arm based boards since last 6 months but no success ! >>>> Compilation has been successful w/o error & vid_streamutil also works >>>> >>>> *Issue - Video is Inactive ( camera does not start during a call pjsua, >>>> but streams with vid_streamutil app )* >>>> Platform - Raspberry Pi 2 with Asterisk SIP Server >>>> PJSIP - v2.3 compiled from source omitting openH264 & libyuv >>>> >>>> Below is the call disconnection message *( PJSU DEMO APP )* >>>> >>>> ----------------------------------------------------------------------------------------- >>>> >>>> 13:03:20.813 pjsua_aud.c ..Conf connect: 2 --> 0 >>>> 13:03:20.813 pjsua_aud.c ...Set sound device: capture=-1, >>>> playback=-2 >>>> 13:03:20.814 pjsua_app.c ....Turning sound device ON >>>> 13:03:20.814 pjsua_aud.c ....Opening sound device PCM at 16000/1/20ms >>>> 13:03:20.838 ec0x21540e8 .....AEC created, clock_rate=16000, >>>> channel=1, samples per frame=320, tail length=200 ms, latency=0 ms >>>> 13:03:20.839 conference.c !...Port 2 (ring) transmitting to port 0 >>>> (default:CARD=U0x46d0x81b) >>>> 13:03:20.839 pjsua_call.c ..Answering call 0: code=200 >>>> 13:03:20.839 pjsua_media.c .....Call 0: updating media.. >>>> 13:03:20.840 pjsua_aud.c !......Audio channel update.. >>>> 13:03:20.840 strm0x217f604 !.......VAD temporarily disabled >>>> 13:03:20.842 strm0x217f604 .......Encoder stream started >>>> 13:03:20.842 strm0x217f604 .......Decoder stream started >>>> 13:03:20.842 pjsua_media.c ......Audio updated, stream #0: PCMU >>>> (sendrecv) >>>> 13:03:20.842 pjsua_vid.c ......Video channel update.. >>>> 13:03:20.863 vstenc0x2183c5 .......Encoder stream started >>>> 13:03:20.863 vstdec0x2183c5 .......Decoder stream started >>>> 13:03:20.864 pjsua_vid.c .......Setting up RX.. >>>> 13:03:20.864 pjsua_vid.c ........Creating video window: >>>> type=stream, cap_id=-1, rend_id=0 >>>> 13:03:20.864 pjsua_vid.c .........Window 0: destroying.. >>>> *13:03:20.864 pjsua_media.c ......pjsua_vid_channel_update() failed >>>> for call_id 0 media 1: Invalid video device (PJMEDIA_EVID_INVDEV)* >>>> 13:03:20.864 pjsua_app.c .....Call 0 media 0 [type=audio], status >>>> is Active >>>> 13:03:20.864 pjsua_aud.c .....Conf disconnect: 2 -x- 0 >>>> 13:03:20.864 conference.c ......Port 2 (ring) stop transmitting to >>>> port 0 (default:CARD=U0x46d0x81b) >>>> 13:03:20.865 pjsua_aud.c .....Conf connect: 3 --> 0 >>>> 13:03:20.865 conference.c ......Port 3 (sip:1004 at 192.168.1.190) >>>> transmitting to port 0 (default:CARD=U0x46d0x81b) >>>> 13:03:20.865 pjsua_aud.c .....Conf connect: 0 --> 3 >>>> 13:03:20.865 conference.c ......Port 0 (default:CARD=U0x46d0x81b) >>>> transmitting to port 3 (sip:1004 at 192.168.1.190) >>>> 13:03:20.865 pjsua_app.c .....Call 0 media 1 [type=video], status >>>> is None >>>> 13:03:20.865 pjsua_app.c .....Just rejected incoming video offer on >>>> call 0, use "vid call enable 1" or "vid call add" to enable video! >>>> 13:03:20.865 pjsua_core.c ......TX 1032 bytes Response msg >>>> 200/INVITE/cseq=102 (tdta0x214a428) to UDP 192.168.1.190:5060: >>>> SIP/2.0 200 OK >>>> Via: SIP/2.0/UDP 192.168.1.190:5060 >>>> ;rport=5060;received=192.168.1.190;branch=z9hG4bK5aac1fe4 >>>> Call-ID: 6f30ba0b4fc6117d07745c7a2aeaa3a6 at 192.168.1.190:5060 >>>> From: "1004" <sip:1004@192.168.1.190>;tag=as16d63286 >>>> To: <sip:1001 at 192.168.1.190 >>>> ;ob>;tag=fb79d2ca-876b-44eb-851d-533a590e3289 >>>> CSeq: 102 INVITE >>>> Contact: <sip:1001 at 192.168.1.190:5090;ob> >>>> Allow: PRACK, INVITE, ACK, BYE, CANCEL, UPDATE, INFO, SUBSCRIBE, >>>> NOTIFY, REFER, MESSAGE, OPTIONS >>>> Supported: replaces, 100rel, timer, norefersub >>>> Content-Type: application/sdp >>>> Content-Length: 469 >>>> >>>> v=0 >>>> o=- 3634961600 3634961601 IN IP4 192.168.1.190 >>>> s=pjmedia >>>> b=AS:352 >>>> t=0 0 >>>> a=X-nat:0 >>>> m=audio 4000 RTP/AVP 0 101 >>>> c=IN IP4 192.168.1.190 >>>> b=TIAS:64000 >>>> a=rtcp:4001 IN IP4 192.168.1.190 >>>> a=sendrecv >>>> a=rtpmap:0 PCMU/8000 >>>> a=rtpmap:101 telephone-event/8000 >>>> a=fmtp:101 0-16 >>>> m=video 4002 RTP/AVP 99 >>>> c=IN IP4 192.168.1.190 >>>> b=TIAS:256000 >>>> a=rtcp:4003 IN IP4 192.168.1.190 >>>> a=sendrecv >>>> a=rtpmap:99 H264/90000 >>>> a=fmtp:99 profile-level-id=428014; packetization-mode=0 >>>> >>>> --end msg-- >>>> 13:03:20.868 pjsua_app.c .........Call 0 state changed to CONNECTING >>>> 13:03:20.869 pjsua_core.c .RX 433 bytes Request msg ACK/cseq=102 >>>> (rdata0x21379ac) from UDP 192.168.1.190:5060: >>>> ACK sip:1001 at 192.168.1.190:5090;ob SIP/2.0 >>>> Via: SIP/2.0/UDP 192.168.1.190:5060;branch=z9hG4bK4dfc06e3;rport >>>> Max-Forwards: 70 >>>> From: "1004" <sip:1004@192.168.1.190>;tag=as16d63286 >>>> To: <sip:1001 at 192.168.1.190:5090 >>>> ;ob>;tag=fb79d2ca-876b-44eb-851d-533a590e3289 >>>> Contact: <sip:1004 at 192.168.1.190:5060> >>>> Call-ID: 6f30ba0b4fc6117d07745c7a2aeaa3a6 at 192.168.1.190:5060 >>>> CSeq: 102 ACK >>>> User-Agent: FPBX-12.0.43(13.2.0) >>>> Content-Length: 0 >>>> >>>> >>>> --end msg-- >>>> 13:03:20.869 pjsua_app.c ...Call 0 state changed to CONFIRMED >>>> 13:03:20.884 Master/sound Underflow, buf_cnt=0, will generate 1 frame >>>> 13:03:21.084 Master/sound Underflow, buf_cnt=0, will generate 1 frame >>>> 13:03:21.148 openh264.cpp Frame size changed: 720x480 --> 352x288 >>>> 13:03:21.504 strm0x217f604 VAD re-enabled >>>> 13:03:29.484 sound_port.c EC suspended because of inactivity >>>> 13:03:30.280 pjsua_core.c .RX 466 bytes Request msg BYE/cseq=103 >>>> (rdata0x21379ac) from UDP 192.168.1.190:5060: >>>> BYE sip:1001 at 192.168.1.190:5090;ob SIP/2.0 >>>> Via: SIP/2.0/UDP 192.168.1.190:5060;branch=z9hG4bK02497827;rport >>>> Max-Forwards: 70 >>>> From: "1004" <sip:1004@192.168.1.190>;tag=as16d63286 >>>> To: <sip:1001 at 192.168.1.190:5090 >>>> ;ob>;tag=fb79d2ca-876b-44eb-851d-533a590e3289 >>>> Call-ID: 6f30ba0b4fc6117d07745c7a2aeaa3a6 at 192.168.1.190:5060 >>>> CSeq: 103 BYE >>>> User-Agent: FPBX-12.0.43(13.2.0) >>>> X-Asterisk-HangupCause: Normal Clearing >>>> X-Asterisk-HangupCauseCode: 16 >>>> Content-Length: 0 >>>> >>>> >>>> --end msg-- >>>> 13:03:30.281 pjsua_core.c .......TX 337 bytes Response msg >>>> 200/BYE/cseq=103 (tdta0x222b5f0) to UDP 192.168.1.190:5060: >>>> SIP/2.0 200 OK >>>> Via: SIP/2.0/UDP 192.168.1.190:5060 >>>> ;rport=5060;received=192.168.1.190;branch=z9hG4bK02497827 >>>> Call-ID: 6f30ba0b4fc6117d07745c7a2aeaa3a6 at 192.168.1.190:5060 >>>> From: "1004" <sip:1004@192.168.1.190>;tag=as16d63286 >>>> To: <sip:1001 at 192.168.1.190 >>>> ;ob>;tag=fb79d2ca-876b-44eb-851d-533a590e3289 >>>> CSeq: 103 BYE >>>> Content-Length: 0 >>>> >>>> >>>> --end msg-- >>>> 13:03:30.281 pjsua_app.c ......Call 0 is DISCONNECTED [reason=200 >>>> (Normal call clearing)] >>>> 13:03:30.282 pjsua_app_comm ...... >>>> [DISCONNCTD] To: "1004" <sip:1004 at 192.168.1.190>;tag=as16d63286 >>>> Call time: 00h:00m:09s, 1st res in 31 ms, conn in 61ms >>>> #0 audio PCMU @8kHz, sendrecv, peer=192.168.1.190:11686 >>>> SRTP status: Not active Crypto-suite: >>>> RX pt=0, last update:00h:00m:00.126s ago >>>> total 466pkt 74.5KB (93.2KB +IP hdr) @avg=63.1Kbps/78.9Kbps >>>> pkt loss=0 (0.0%), discrd=0 (0.0%), dup=0 (0.0%), reord=0 >>>> (0.0%) >>>> (msec) min avg max last dev >>>> loss period: 0.000 0.000 0.000 0.000 0.000 >>>> jitter : 0.000 1.774 5.875 2.125 1.593 >>>> TX pt=0, ptime=20, last update:00h:00m:04.393s ago >>>> total 172pkt 27.5KB (34.4KB +IP hdr) @avg=23.3Kbps/29.1Kbps >>>> pkt loss=0 (0.0%), dup=0 (0.0%), reorder=0 (0.0%) >>>> (msec) min avg max last dev >>>> loss period: 0.000 0.000 0.000 0.000 0.000 >>>> jitter : 15.875 15.875 15.875 15.875 0.000 >>>> RTT msec : 1.037 1.037 1.037 1.037 0.000 >>>> * #1 video H264, inactive, peer=192.168.1.190:13954 >>>> <http://192.168.1.190:13954>* >>>> * SRTP status: Not active Crypto-suite: * >>>> RX last update:00h:00m:09.153s ago >>>> total 944pkt 1.07MB (1.11MB +IP hdr) @avg=911.4Kbps/943.5Kbps >>>> pkt loss=0 (0.0%), discrd=0 (0.0%), dup=0 (0.0%), reord=0 >>>> (0.0%) >>>> (msec) min avg max last dev >>>> loss period: 0.000 0.000 0.000 0.000 0.000 >>>> jitter : 0.011 1.038 3.211 1.566 0.769 >>>> * TX last update:never* >>>> * total 0pkt 0B (0B +IP hdr) @avg=0bps/0bps* >>>> * pkt loss=0 (0.0%), dup=0 (0.0%), reorder=0 (0.0%)* >>>> * (msec) min avg max last dev * >>>> * loss period: 0.000 0.000 0.000 0.000 0.000* >>>> * jitter : 0.000 0.000 0.000 0.000 0.000* >>>> RTT msec : 0.000 0.000 0.000 0.000 0.000 >>>> 13:03:30.282 pjsua_media.c ......Call 0: deinitializing media.. >>>> 13:03:30.283 pjsua_media.c ........Media stream call00:0 is destroyed >>>> 13:03:30.283 pjsua_vid.c ........Stopping video stream.. >>>> 13:03:30.287 pjsua_media.c ........Media stream call00:1 is destroyed >>>> 13:03:31.282 pjsua_aud.c Closing sound device after idle for 1 >>>> second(s) >>>> 13:03:31.282 pjsua_app.c .Turning sound device OFF >>>> 13:03:31.283 pjsua_aud.c .Closing default:CARD=ALSA sound playback >>>> device and default:CARD=U0x46d0x81b sound capture device >>>> >>>> >>>> ----------------------------------------------------------------------------------------- >>>> *VID_STREAMUTIL OUTPUT ( Streams the VIDEO )* >>>> >>>> sudo ./vid_streamutil --send-only --remote=192.168.1.191:4000 >>>> 12:45:18.016 os_core_unix.c !pjlib 2.3 for POSIX initialized >>>> 12:45:18.121 alsa_dev.c Added sound device default:CARD=ALSA >>>> 12:45:18.124 alsa_dev.c Added sound device sysdefault:CARD=ALSA >>>> 12:45:18.146 alsa_dev.c Added sound device default:CARD=U0x46d0x81b >>>> 12:45:18.163 alsa_dev.c Added sound device >>>> sysdefault:CARD=U0x46d0x81b >>>> 12:45:18.168 alsa_dev.c Added sound device >>>> front:CARD=U0x46d0x81b,DEV=0 >>>> 12:45:18.174 alsa_dev.c Added sound device >>>> surround40:CARD=U0x46d0x81b,DEV=0 >>>> 12:45:18.179 alsa_dev.c Added sound device >>>> surround41:CARD=U0x46d0x81b,DEV=0 >>>> 12:45:18.183 alsa_dev.c Added sound device >>>> surround50:CARD=U0x46d0x81b,DEV=0 >>>> 12:45:18.192 alsa_dev.c Added sound device >>>> surround51:CARD=U0x46d0x81b,DEV=0 >>>> 12:45:18.197 alsa_dev.c Added sound device >>>> surround71:CARD=U0x46d0x81b,DEV=0 >>>> 12:45:18.203 alsa_dev.c Added sound device >>>> iec958:CARD=U0x46d0x81b,DEV=0 >>>> 12:45:18.203 alsa_dev.c ALSA driver found 11 devices >>>> 12:45:18.204 alsa_dev.c ALSA initialized >>>> 12:45:18.253 pa_dev.c PortAudio sound library initialized, >>>> status=0 >>>> 12:45:18.253 pa_dev.c PortAudio host api count=2 >>>> 12:45:18.253 pa_dev.c Sound device count=6 >>>> 12:45:18.253 pjlib select() I/O Queue created (0x1d698ec) >>>> 12:45:18.257 v4l2_dev.c Found capture device UVC Camera (046d:081b) >>>> 12:45:18.257 v4l2_dev.c Enumerating formats: >>>> 12:45:18.257 v4l2_dev.c Supported: YUV 4:2:2 (YUYV) >>>> 12:45:18.258 v4l2_dev.c Unsupported: MJPEG >>>> 12:45:18.258 v4l2_dev.c Unsupported: RGB3 >>>> 12:45:18.258 v4l2_dev.c Supported: BGR3 >>>> 12:45:18.258 v4l2_dev.c Unsupported: YU12 >>>> 12:45:18.258 v4l2_dev.c Unsupported: YV12 >>>> 12:45:18.261 v4l2_dev.c Video4Linux2 has 1 devices >>>> 12:45:18.261 colorbar_dev.c Colorbar video src initialized with 1 >>>> device(s): >>>> 12:45:18.261 colorbar_dev.c 0: Colorbar generator >>>> 12:45:18.281 sdl_dev.c !SDL_Init() error: No available video device >>>> 12:45:18.282 openh264.cpp !OpenH264 codec initialized >>>> 12:45:18.282 vid_port.c Opening device UVC Camera (046d:081b) >>>> [v4l2] for capture: format=YUY2, size=720x480 @15:1 fps >>>> 12:45:18.338 v4l2_dev.c mmap streaming initialized >>>> 12:45:18.338 vid_port.c Device UVC Camera (046d:081b) [v4l2] >>>> opened: format=YUY2, size=640x480 @15:1 fps >>>> 12:45:18.341 openh264.cpp Opening codec.. >>>> 12:45:18.360 rtp.c pjmedia_rtp_session_init: ses=0x1d720c0, >>>> default_pt=97, ssrc=0x773f1b32 >>>> 12:45:18.361 vstdec0x74cc60 Decoding channel created 720x480 >>>> I420<-H264 22/1(~22)fps >>>> 12:45:18.361 rtp.c pjmedia_rtp_session_init: ses=0x1d72154, >>>> default_pt=97, ssrc=0x773f1b32 >>>> 12:45:18.361 vstenc0x74cc60 Encoding channel created 720x480 >>>> I420->H264 15/1(~15)fps >>>> 12:45:18.361 udp0x1d75a58 SO_RCVBUF set to 163840 >>>> 12:45:18.361 udp0x1d75a58 SO_SNDBUF set to 163840 >>>> 12:45:18.362 vid_stream.c Video stream vstrm0x74cc607c created >>>> 12:45:18.362 vstenc0x74cc60 Encoder stream started >>>> 12:45:18.362 vstdec0x74cc60 Decoder stream paused >>>> 12:45:18.362 v4l2_dev.c Starting v4l2 video stream UVC Camera >>>> (046d:081b) >>>> Stream is active, dir is send-only, sending to 192.168.1.91:4000 >>>> 12:45:18.373 vid_streamutil Sending 720x480 H264 @15.00fps >>>> >>>> Commands: >>>> q Quit >>>> >>>> Command: q >>>> 12:45:40.115 v4l2_dev.c Stopping v4l2 video stream UVC Camera >>>> (046d:081b) >>>> 12:45:40.116 vid_port.c Closing UVC Camera (046d:081b).. >>>> 12:45:40.116 v4l2_dev.c Stopping v4l2 video stream UVC Camera >>>> (046d:081b) >>>> 12:45:40.117 v4l2_dev.c Destroying v4l2 video stream UVC Camera >>>> (046d:081b) >>>> 12:45:40.123 vstdec0x74cc60 JB summary: >>>> size=0/eff=0 prefetch=0 level=0 >>>> delay (min/max/avg/dev)=0/0/0/0 ms >>>> burst (min/max/avg/dev)=0/0/0/0 frames >>>> lost=0 discard=0 empty=0 >>>> 12:45:40.281 pa_dev.c PortAudio sound library shutting down.. >>>> >>>> >>>> ----------------------------------------------------------------------------------------- >>>> >>>> Thank You >>>> Best, >>>> Chirag A. >>>> >>>> _______________________________________________ >>>> Visit our blog: http://blog.pjsip.org >>>> >>>> pjsip mailing list >>>> pjsip at lists.pjsip.org >>>> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >>>> >>>> >>> >>> _______________________________________________ >>> Visit our blog: http://blog.pjsip.org >>> >>> pjsip mailing list >>> pjsip at lists.pjsip.org >>> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >>> >>> >> >> _______________________________________________ >> Visit our blog: http://blog.pjsip.org >> >> pjsip mailing list >> pjsip at lists.pjsip.org >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20150311/599daad3/attachment.html>
