Dear Matt, Thank you very much for the prompt response ! Help Appreciated I followed the instructions on an existing image but no luck. Have started fresh, will post update soon Thanks Best, Chirag A. On Tue, Mar 10, 2015 at 7:08 PM, Matt Broad <matt at supportedbusiness.com> wrote: > are you running pjsua with --video or are you using "vid enable". I was > unable to get this to work on the RpiB using Openh264 and after following > some steps form another user on this list was able to get video working. > > in a nutshell you need to: > install x264 > $ apt-get install x264 libx264-dev > > download and install ssl (not mandatory) > $ apt-get install openssl > $ apt-get install libssl-dev > > download and compile sdl2 (I tried the pre compiled version but this did > not work so had to compile myself) > > download and compile ffmpeg 1.2.6 (this will take a few hours so make > yourself a big cup of tea) > > $ ./configure --enable-shared --disable-static --enable-memalign-hack > --enable-gpl --enable-libx264 > $ make && make install > > create file pjproject-2.2.1/pjlib/include/pj/config_site.h > add the following line and save > #define PJMEDIA_HAS_VIDEO 1 > > download and compile pjproject (add parameters to ./configure if you do > not want ssl) > ./configure && make && make install > > launch pjsua with --video > or you could use the following > pjsua --video --log-level=5 --add-codec=G722 --auto-answer=200 --no-vad > --ec-tail 0 --playback-dev=0 > > credit to Silvio for these steps > > thanks > Matt > > On 10 March 2015 at 07:41, Chirag Ajmera <chirag at ncc.co.in> wrote: > >> Kindly can anyone please guide on the below, I have been trying to get >> video working on Arm based boards since last 6 months but no success ! >> Compilation has been successful w/o error & vid_streamutil also works >> >> *Issue - Video is Inactive ( camera does not start during a call pjsua, >> but streams with vid_streamutil app )* >> Platform - Raspberry Pi 2 with Asterisk SIP Server >> PJSIP - v2.3 compiled from source omitting openH264 & libyuv >> >> Below is the call disconnection message *( PJSU DEMO APP )* >> >> ----------------------------------------------------------------------------------------- >> >> 13:03:20.813 pjsua_aud.c ..Conf connect: 2 --> 0 >> 13:03:20.813 pjsua_aud.c ...Set sound device: capture=-1, playback=-2 >> 13:03:20.814 pjsua_app.c ....Turning sound device ON >> 13:03:20.814 pjsua_aud.c ....Opening sound device PCM at 16000/1/20ms >> 13:03:20.838 ec0x21540e8 .....AEC created, clock_rate=16000, >> channel=1, samples per frame=320, tail length=200 ms, latency=0 ms >> 13:03:20.839 conference.c !...Port 2 (ring) transmitting to port 0 >> (default:CARD=U0x46d0x81b) >> 13:03:20.839 pjsua_call.c ..Answering call 0: code=200 >> 13:03:20.839 pjsua_media.c .....Call 0: updating media.. >> 13:03:20.840 pjsua_aud.c !......Audio channel update.. >> 13:03:20.840 strm0x217f604 !.......VAD temporarily disabled >> 13:03:20.842 strm0x217f604 .......Encoder stream started >> 13:03:20.842 strm0x217f604 .......Decoder stream started >> 13:03:20.842 pjsua_media.c ......Audio updated, stream #0: PCMU >> (sendrecv) >> 13:03:20.842 pjsua_vid.c ......Video channel update.. >> 13:03:20.863 vstenc0x2183c5 .......Encoder stream started >> 13:03:20.863 vstdec0x2183c5 .......Decoder stream started >> 13:03:20.864 pjsua_vid.c .......Setting up RX.. >> 13:03:20.864 pjsua_vid.c ........Creating video window: type=stream, >> cap_id=-1, rend_id=0 >> 13:03:20.864 pjsua_vid.c .........Window 0: destroying.. >> *13:03:20.864 pjsua_media.c ......pjsua_vid_channel_update() failed for >> call_id 0 media 1: Invalid video device (PJMEDIA_EVID_INVDEV)* >> 13:03:20.864 pjsua_app.c .....Call 0 media 0 [type=audio], status is >> Active >> 13:03:20.864 pjsua_aud.c .....Conf disconnect: 2 -x- 0 >> 13:03:20.864 conference.c ......Port 2 (ring) stop transmitting to >> port 0 (default:CARD=U0x46d0x81b) >> 13:03:20.865 pjsua_aud.c .....Conf connect: 3 --> 0 >> 13:03:20.865 conference.c ......Port 3 (sip:1004 at 192.168.1.190) >> transmitting to port 0 (default:CARD=U0x46d0x81b) >> 13:03:20.865 pjsua_aud.c .....Conf connect: 0 --> 3 >> 13:03:20.865 conference.c ......Port 0 (default:CARD=U0x46d0x81b) >> transmitting to port 3 (sip:1004 at 192.168.1.190) >> 13:03:20.865 pjsua_app.c .....Call 0 media 1 [type=video], status is >> None >> 13:03:20.865 pjsua_app.c .....Just rejected incoming video offer on >> call 0, use "vid call enable 1" or "vid call add" to enable video! >> 13:03:20.865 pjsua_core.c ......TX 1032 bytes Response msg >> 200/INVITE/cseq=102 (tdta0x214a428) to UDP 192.168.1.190:5060: >> SIP/2.0 200 OK >> Via: SIP/2.0/UDP 192.168.1.190:5060 >> ;rport=5060;received=192.168.1.190;branch=z9hG4bK5aac1fe4 >> Call-ID: 6f30ba0b4fc6117d07745c7a2aeaa3a6 at 192.168.1.190:5060 >> From: "1004" <sip:1004@192.168.1.190>;tag=as16d63286 >> To: <sip:1001 at 192.168.1.190;ob>;tag=fb79d2ca-876b-44eb-851d-533a590e3289 >> CSeq: 102 INVITE >> Contact: <sip:1001 at 192.168.1.190:5090;ob> >> Allow: PRACK, INVITE, ACK, BYE, CANCEL, UPDATE, INFO, SUBSCRIBE, NOTIFY, >> REFER, MESSAGE, OPTIONS >> Supported: replaces, 100rel, timer, norefersub >> Content-Type: application/sdp >> Content-Length: 469 >> >> v=0 >> o=- 3634961600 3634961601 IN IP4 192.168.1.190 >> s=pjmedia >> b=AS:352 >> t=0 0 >> a=X-nat:0 >> m=audio 4000 RTP/AVP 0 101 >> c=IN IP4 192.168.1.190 >> b=TIAS:64000 >> a=rtcp:4001 IN IP4 192.168.1.190 >> a=sendrecv >> a=rtpmap:0 PCMU/8000 >> a=rtpmap:101 telephone-event/8000 >> a=fmtp:101 0-16 >> m=video 4002 RTP/AVP 99 >> c=IN IP4 192.168.1.190 >> b=TIAS:256000 >> a=rtcp:4003 IN IP4 192.168.1.190 >> a=sendrecv >> a=rtpmap:99 H264/90000 >> a=fmtp:99 profile-level-id=428014; packetization-mode=0 >> >> --end msg-- >> 13:03:20.868 pjsua_app.c .........Call 0 state changed to CONNECTING >> 13:03:20.869 pjsua_core.c .RX 433 bytes Request msg ACK/cseq=102 >> (rdata0x21379ac) from UDP 192.168.1.190:5060: >> ACK sip:1001 at 192.168.1.190:5090;ob SIP/2.0 >> Via: SIP/2.0/UDP 192.168.1.190:5060;branch=z9hG4bK4dfc06e3;rport >> Max-Forwards: 70 >> From: "1004" <sip:1004@192.168.1.190>;tag=as16d63286 >> To: <sip:1001 at 192.168.1.190:5090 >> ;ob>;tag=fb79d2ca-876b-44eb-851d-533a590e3289 >> Contact: <sip:1004 at 192.168.1.190:5060> >> Call-ID: 6f30ba0b4fc6117d07745c7a2aeaa3a6 at 192.168.1.190:5060 >> CSeq: 102 ACK >> User-Agent: FPBX-12.0.43(13.2.0) >> Content-Length: 0 >> >> >> --end msg-- >> 13:03:20.869 pjsua_app.c ...Call 0 state changed to CONFIRMED >> 13:03:20.884 Master/sound Underflow, buf_cnt=0, will generate 1 frame >> 13:03:21.084 Master/sound Underflow, buf_cnt=0, will generate 1 frame >> 13:03:21.148 openh264.cpp Frame size changed: 720x480 --> 352x288 >> 13:03:21.504 strm0x217f604 VAD re-enabled >> 13:03:29.484 sound_port.c EC suspended because of inactivity >> 13:03:30.280 pjsua_core.c .RX 466 bytes Request msg BYE/cseq=103 >> (rdata0x21379ac) from UDP 192.168.1.190:5060: >> BYE sip:1001 at 192.168.1.190:5090;ob SIP/2.0 >> Via: SIP/2.0/UDP 192.168.1.190:5060;branch=z9hG4bK02497827;rport >> Max-Forwards: 70 >> From: "1004" <sip:1004@192.168.1.190>;tag=as16d63286 >> To: <sip:1001 at 192.168.1.190:5090 >> ;ob>;tag=fb79d2ca-876b-44eb-851d-533a590e3289 >> Call-ID: 6f30ba0b4fc6117d07745c7a2aeaa3a6 at 192.168.1.190:5060 >> CSeq: 103 BYE >> User-Agent: FPBX-12.0.43(13.2.0) >> X-Asterisk-HangupCause: Normal Clearing >> X-Asterisk-HangupCauseCode: 16 >> Content-Length: 0 >> >> >> --end msg-- >> 13:03:30.281 pjsua_core.c .......TX 337 bytes Response msg >> 200/BYE/cseq=103 (tdta0x222b5f0) to UDP 192.168.1.190:5060: >> SIP/2.0 200 OK >> Via: SIP/2.0/UDP 192.168.1.190:5060 >> ;rport=5060;received=192.168.1.190;branch=z9hG4bK02497827 >> Call-ID: 6f30ba0b4fc6117d07745c7a2aeaa3a6 at 192.168.1.190:5060 >> From: "1004" <sip:1004@192.168.1.190>;tag=as16d63286 >> To: <sip:1001 at 192.168.1.190;ob>;tag=fb79d2ca-876b-44eb-851d-533a590e3289 >> CSeq: 103 BYE >> Content-Length: 0 >> >> >> --end msg-- >> 13:03:30.281 pjsua_app.c ......Call 0 is DISCONNECTED [reason=200 >> (Normal call clearing)] >> 13:03:30.282 pjsua_app_comm ...... >> [DISCONNCTD] To: "1004" <sip:1004 at 192.168.1.190>;tag=as16d63286 >> Call time: 00h:00m:09s, 1st res in 31 ms, conn in 61ms >> #0 audio PCMU @8kHz, sendrecv, peer=192.168.1.190:11686 >> SRTP status: Not active Crypto-suite: >> RX pt=0, last update:00h:00m:00.126s ago >> total 466pkt 74.5KB (93.2KB +IP hdr) @avg=63.1Kbps/78.9Kbps >> pkt loss=0 (0.0%), discrd=0 (0.0%), dup=0 (0.0%), reord=0 (0.0%) >> (msec) min avg max last dev >> loss period: 0.000 0.000 0.000 0.000 0.000 >> jitter : 0.000 1.774 5.875 2.125 1.593 >> TX pt=0, ptime=20, last update:00h:00m:04.393s ago >> total 172pkt 27.5KB (34.4KB +IP hdr) @avg=23.3Kbps/29.1Kbps >> pkt loss=0 (0.0%), dup=0 (0.0%), reorder=0 (0.0%) >> (msec) min avg max last dev >> loss period: 0.000 0.000 0.000 0.000 0.000 >> jitter : 15.875 15.875 15.875 15.875 0.000 >> RTT msec : 1.037 1.037 1.037 1.037 0.000 >> * #1 video H264, inactive, peer=192.168.1.190:13954 >> <http://192.168.1.190:13954>* >> * SRTP status: Not active Crypto-suite: * >> RX last update:00h:00m:09.153s ago >> total 944pkt 1.07MB (1.11MB +IP hdr) @avg=911.4Kbps/943.5Kbps >> pkt loss=0 (0.0%), discrd=0 (0.0%), dup=0 (0.0%), reord=0 (0.0%) >> (msec) min avg max last dev >> loss period: 0.000 0.000 0.000 0.000 0.000 >> jitter : 0.011 1.038 3.211 1.566 0.769 >> * TX last update:never* >> * total 0pkt 0B (0B +IP hdr) @avg=0bps/0bps* >> * pkt loss=0 (0.0%), dup=0 (0.0%), reorder=0 (0.0%)* >> * (msec) min avg max last dev * >> * loss period: 0.000 0.000 0.000 0.000 0.000* >> * jitter : 0.000 0.000 0.000 0.000 0.000* >> RTT msec : 0.000 0.000 0.000 0.000 0.000 >> 13:03:30.282 pjsua_media.c ......Call 0: deinitializing media.. >> 13:03:30.283 pjsua_media.c ........Media stream call00:0 is destroyed >> 13:03:30.283 pjsua_vid.c ........Stopping video stream.. >> 13:03:30.287 pjsua_media.c ........Media stream call00:1 is destroyed >> 13:03:31.282 pjsua_aud.c Closing sound device after idle for 1 >> second(s) >> 13:03:31.282 pjsua_app.c .Turning sound device OFF >> 13:03:31.283 pjsua_aud.c .Closing default:CARD=ALSA sound playback >> device and default:CARD=U0x46d0x81b sound capture device >> >> >> ----------------------------------------------------------------------------------------- >> *VID_STREAMUTIL OUTPUT ( Streams the VIDEO )* >> >> sudo ./vid_streamutil --send-only --remote=192.168.1.191:4000 >> 12:45:18.016 os_core_unix.c !pjlib 2.3 for POSIX initialized >> 12:45:18.121 alsa_dev.c Added sound device default:CARD=ALSA >> 12:45:18.124 alsa_dev.c Added sound device sysdefault:CARD=ALSA >> 12:45:18.146 alsa_dev.c Added sound device default:CARD=U0x46d0x81b >> 12:45:18.163 alsa_dev.c Added sound device >> sysdefault:CARD=U0x46d0x81b >> 12:45:18.168 alsa_dev.c Added sound device >> front:CARD=U0x46d0x81b,DEV=0 >> 12:45:18.174 alsa_dev.c Added sound device >> surround40:CARD=U0x46d0x81b,DEV=0 >> 12:45:18.179 alsa_dev.c Added sound device >> surround41:CARD=U0x46d0x81b,DEV=0 >> 12:45:18.183 alsa_dev.c Added sound device >> surround50:CARD=U0x46d0x81b,DEV=0 >> 12:45:18.192 alsa_dev.c Added sound device >> surround51:CARD=U0x46d0x81b,DEV=0 >> 12:45:18.197 alsa_dev.c Added sound device >> surround71:CARD=U0x46d0x81b,DEV=0 >> 12:45:18.203 alsa_dev.c Added sound device >> iec958:CARD=U0x46d0x81b,DEV=0 >> 12:45:18.203 alsa_dev.c ALSA driver found 11 devices >> 12:45:18.204 alsa_dev.c ALSA initialized >> 12:45:18.253 pa_dev.c PortAudio sound library initialized, status=0 >> 12:45:18.253 pa_dev.c PortAudio host api count=2 >> 12:45:18.253 pa_dev.c Sound device count=6 >> 12:45:18.253 pjlib select() I/O Queue created (0x1d698ec) >> 12:45:18.257 v4l2_dev.c Found capture device UVC Camera (046d:081b) >> 12:45:18.257 v4l2_dev.c Enumerating formats: >> 12:45:18.257 v4l2_dev.c Supported: YUV 4:2:2 (YUYV) >> 12:45:18.258 v4l2_dev.c Unsupported: MJPEG >> 12:45:18.258 v4l2_dev.c Unsupported: RGB3 >> 12:45:18.258 v4l2_dev.c Supported: BGR3 >> 12:45:18.258 v4l2_dev.c Unsupported: YU12 >> 12:45:18.258 v4l2_dev.c Unsupported: YV12 >> 12:45:18.261 v4l2_dev.c Video4Linux2 has 1 devices >> 12:45:18.261 colorbar_dev.c Colorbar video src initialized with 1 >> device(s): >> 12:45:18.261 colorbar_dev.c 0: Colorbar generator >> 12:45:18.281 sdl_dev.c !SDL_Init() error: No available video device >> 12:45:18.282 openh264.cpp !OpenH264 codec initialized >> 12:45:18.282 vid_port.c Opening device UVC Camera (046d:081b) [v4l2] >> for capture: format=YUY2, size=720x480 @15:1 fps >> 12:45:18.338 v4l2_dev.c mmap streaming initialized >> 12:45:18.338 vid_port.c Device UVC Camera (046d:081b) [v4l2] opened: >> format=YUY2, size=640x480 @15:1 fps >> 12:45:18.341 openh264.cpp Opening codec.. >> 12:45:18.360 rtp.c pjmedia_rtp_session_init: ses=0x1d720c0, >> default_pt=97, ssrc=0x773f1b32 >> 12:45:18.361 vstdec0x74cc60 Decoding channel created 720x480 I420<-H264 >> 22/1(~22)fps >> 12:45:18.361 rtp.c pjmedia_rtp_session_init: ses=0x1d72154, >> default_pt=97, ssrc=0x773f1b32 >> 12:45:18.361 vstenc0x74cc60 Encoding channel created 720x480 I420->H264 >> 15/1(~15)fps >> 12:45:18.361 udp0x1d75a58 SO_RCVBUF set to 163840 >> 12:45:18.361 udp0x1d75a58 SO_SNDBUF set to 163840 >> 12:45:18.362 vid_stream.c Video stream vstrm0x74cc607c created >> 12:45:18.362 vstenc0x74cc60 Encoder stream started >> 12:45:18.362 vstdec0x74cc60 Decoder stream paused >> 12:45:18.362 v4l2_dev.c Starting v4l2 video stream UVC Camera >> (046d:081b) >> Stream is active, dir is send-only, sending to 192.168.1.91:4000 >> 12:45:18.373 vid_streamutil Sending 720x480 H264 @15.00fps >> >> Commands: >> q Quit >> >> Command: q >> 12:45:40.115 v4l2_dev.c Stopping v4l2 video stream UVC Camera >> (046d:081b) >> 12:45:40.116 vid_port.c Closing UVC Camera (046d:081b).. >> 12:45:40.116 v4l2_dev.c Stopping v4l2 video stream UVC Camera >> (046d:081b) >> 12:45:40.117 v4l2_dev.c Destroying v4l2 video stream UVC Camera >> (046d:081b) >> 12:45:40.123 vstdec0x74cc60 JB summary: >> size=0/eff=0 prefetch=0 level=0 >> delay (min/max/avg/dev)=0/0/0/0 ms >> burst (min/max/avg/dev)=0/0/0/0 frames >> lost=0 discard=0 empty=0 >> 12:45:40.281 pa_dev.c PortAudio sound library shutting down.. >> >> >> ----------------------------------------------------------------------------------------- >> >> Thank You >> Best, >> Chirag A. >> >> _______________________________________________ >> Visit our blog: http://blog.pjsip.org >> >> pjsip mailing list >> pjsip at lists.pjsip.org >> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >> >> > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20150311/9a7ccb44/attachment.html>
