Dear Matt, No success starting fresh .. still the same problem Kindly share the guide Also, let know if you are using Desktop (start-x) while running pjsua sample .. cause I been trying things via ssh terminal and I boot to console on start up ( Raspberry Pi ) Using Logitech camera via v4l2 ( vid_streamutil does work ) The camera led is not started at all when running pjsua sample Thanks Chirag A. On Wed, Mar 11, 2015 at 6:51 PM, Matt Broad <matt at supportedbusiness.com> wrote: > If it does not work let me know and I will look at my notes. I made a > step by step guide of each install I tried as I spent ALOT of time trying > and failing to get video to work. > > thanks > > > On 11 March 2015 at 13:19, Matt Broad <matt at supportedbusiness.com> wrote: > >> No Problem, I found that I had to remove the pjsip folder from an >> earlier attempt and start that stage again before it would compile >> correctly. >> I must stress that ffmpg cannot be a higher version than 1.2.6. I tried >> and it will not work, I used 1.2.6 and it worked fine :) >> >> >> thanks >> Matt >> >> On 11 March 2015 at 13:10, Chirag Ajmera <chirag at ncc.co.in> wrote: >> >>> Dear Matt, >>> >>> Thank you very much for the prompt response ! Help Appreciated >>> >>> I followed the instructions on an existing image but no luck. >>> >>> Have started fresh, will post update soon >>> >>> Thanks >>> Best, >>> Chirag A. >>> >>> >>> On Tue, Mar 10, 2015 at 7:08 PM, Matt Broad <matt at supportedbusiness.com> >>> wrote: >>> >>>> are you running pjsua with --video or are you using "vid enable". I >>>> was unable to get this to work on the RpiB using Openh264 and after >>>> following some steps form another user on this list was able to get video >>>> working. >>>> >>>> in a nutshell you need to: >>>> install x264 >>>> $ apt-get install x264 libx264-dev >>>> >>>> download and install ssl (not mandatory) >>>> $ apt-get install openssl >>>> $ apt-get install libssl-dev >>>> >>>> download and compile sdl2 (I tried the pre compiled version but this >>>> did not work so had to compile myself) >>>> >>>> download and compile ffmpeg 1.2.6 (this will take a few hours so make >>>> yourself a big cup of tea) >>>> >>>> $ ./configure --enable-shared --disable-static --enable-memalign-hack >>>> --enable-gpl --enable-libx264 >>>> $ make && make install >>>> >>>> create file pjproject-2.2.1/pjlib/include/pj/config_site.h >>>> add the following line and save >>>> #define PJMEDIA_HAS_VIDEO 1 >>>> >>>> download and compile pjproject (add parameters to ./configure if you do >>>> not want ssl) >>>> ./configure && make && make install >>>> >>>> launch pjsua with --video >>>> or you could use the following >>>> pjsua --video --log-level=5 --add-codec=G722 --auto-answer=200 --no-vad >>>> --ec-tail 0 --playback-dev=0 >>>> >>>> credit to Silvio for these steps >>>> >>>> thanks >>>> Matt >>>> >>>> On 10 March 2015 at 07:41, Chirag Ajmera <chirag at ncc.co.in> wrote: >>>> >>>>> Kindly can anyone please guide on the below, I have been trying to get >>>>> video working on Arm based boards since last 6 months but no success ! >>>>> Compilation has been successful w/o error & vid_streamutil also works >>>>> >>>>> *Issue - Video is Inactive ( camera does not start during a call >>>>> pjsua, but streams with vid_streamutil app )* >>>>> Platform - Raspberry Pi 2 with Asterisk SIP Server >>>>> PJSIP - v2.3 compiled from source omitting openH264 & libyuv >>>>> >>>>> Below is the call disconnection message *( PJSU DEMO APP )* >>>>> >>>>> ----------------------------------------------------------------------------------------- >>>>> >>>>> 13:03:20.813 pjsua_aud.c ..Conf connect: 2 --> 0 >>>>> 13:03:20.813 pjsua_aud.c ...Set sound device: capture=-1, >>>>> playback=-2 >>>>> 13:03:20.814 pjsua_app.c ....Turning sound device ON >>>>> 13:03:20.814 pjsua_aud.c ....Opening sound device PCM at 16000/1/20ms >>>>> 13:03:20.838 ec0x21540e8 .....AEC created, clock_rate=16000, >>>>> channel=1, samples per frame=320, tail length=200 ms, latency=0 ms >>>>> 13:03:20.839 conference.c !...Port 2 (ring) transmitting to port 0 >>>>> (default:CARD=U0x46d0x81b) >>>>> 13:03:20.839 pjsua_call.c ..Answering call 0: code=200 >>>>> 13:03:20.839 pjsua_media.c .....Call 0: updating media.. >>>>> 13:03:20.840 pjsua_aud.c !......Audio channel update.. >>>>> 13:03:20.840 strm0x217f604 !.......VAD temporarily disabled >>>>> 13:03:20.842 strm0x217f604 .......Encoder stream started >>>>> 13:03:20.842 strm0x217f604 .......Decoder stream started >>>>> 13:03:20.842 pjsua_media.c ......Audio updated, stream #0: PCMU >>>>> (sendrecv) >>>>> 13:03:20.842 pjsua_vid.c ......Video channel update.. >>>>> 13:03:20.863 vstenc0x2183c5 .......Encoder stream started >>>>> 13:03:20.863 vstdec0x2183c5 .......Decoder stream started >>>>> 13:03:20.864 pjsua_vid.c .......Setting up RX.. >>>>> 13:03:20.864 pjsua_vid.c ........Creating video window: >>>>> type=stream, cap_id=-1, rend_id=0 >>>>> 13:03:20.864 pjsua_vid.c .........Window 0: destroying.. >>>>> *13:03:20.864 pjsua_media.c ......pjsua_vid_channel_update() failed >>>>> for call_id 0 media 1: Invalid video device (PJMEDIA_EVID_INVDEV)* >>>>> 13:03:20.864 pjsua_app.c .....Call 0 media 0 [type=audio], status >>>>> is Active >>>>> 13:03:20.864 pjsua_aud.c .....Conf disconnect: 2 -x- 0 >>>>> 13:03:20.864 conference.c ......Port 2 (ring) stop transmitting to >>>>> port 0 (default:CARD=U0x46d0x81b) >>>>> 13:03:20.865 pjsua_aud.c .....Conf connect: 3 --> 0 >>>>> 13:03:20.865 conference.c ......Port 3 (sip:1004 at 192.168.1.190) >>>>> transmitting to port 0 (default:CARD=U0x46d0x81b) >>>>> 13:03:20.865 pjsua_aud.c .....Conf connect: 0 --> 3 >>>>> 13:03:20.865 conference.c ......Port 0 (default:CARD=U0x46d0x81b) >>>>> transmitting to port 3 (sip:1004 at 192.168.1.190) >>>>> 13:03:20.865 pjsua_app.c .....Call 0 media 1 [type=video], status >>>>> is None >>>>> 13:03:20.865 pjsua_app.c .....Just rejected incoming video offer >>>>> on call 0, use "vid call enable 1" or "vid call add" to enable video! >>>>> 13:03:20.865 pjsua_core.c ......TX 1032 bytes Response msg >>>>> 200/INVITE/cseq=102 (tdta0x214a428) to UDP 192.168.1.190:5060: >>>>> SIP/2.0 200 OK >>>>> Via: SIP/2.0/UDP 192.168.1.190:5060 >>>>> ;rport=5060;received=192.168.1.190;branch=z9hG4bK5aac1fe4 >>>>> Call-ID: 6f30ba0b4fc6117d07745c7a2aeaa3a6 at 192.168.1.190:5060 >>>>> From: "1004" <sip:1004@192.168.1.190>;tag=as16d63286 >>>>> To: <sip:1001 at 192.168.1.190 >>>>> ;ob>;tag=fb79d2ca-876b-44eb-851d-533a590e3289 >>>>> CSeq: 102 INVITE >>>>> Contact: <sip:1001 at 192.168.1.190:5090;ob> >>>>> Allow: PRACK, INVITE, ACK, BYE, CANCEL, UPDATE, INFO, SUBSCRIBE, >>>>> NOTIFY, REFER, MESSAGE, OPTIONS >>>>> Supported: replaces, 100rel, timer, norefersub >>>>> Content-Type: application/sdp >>>>> Content-Length: 469 >>>>> >>>>> v=0 >>>>> o=- 3634961600 3634961601 IN IP4 192.168.1.190 >>>>> s=pjmedia >>>>> b=AS:352 >>>>> t=0 0 >>>>> a=X-nat:0 >>>>> m=audio 4000 RTP/AVP 0 101 >>>>> c=IN IP4 192.168.1.190 >>>>> b=TIAS:64000 >>>>> a=rtcp:4001 IN IP4 192.168.1.190 >>>>> a=sendrecv >>>>> a=rtpmap:0 PCMU/8000 >>>>> a=rtpmap:101 telephone-event/8000 >>>>> a=fmtp:101 0-16 >>>>> m=video 4002 RTP/AVP 99 >>>>> c=IN IP4 192.168.1.190 >>>>> b=TIAS:256000 >>>>> a=rtcp:4003 IN IP4 192.168.1.190 >>>>> a=sendrecv >>>>> a=rtpmap:99 H264/90000 >>>>> a=fmtp:99 profile-level-id=428014; packetization-mode=0 >>>>> >>>>> --end msg-- >>>>> 13:03:20.868 pjsua_app.c .........Call 0 state changed to >>>>> CONNECTING >>>>> 13:03:20.869 pjsua_core.c .RX 433 bytes Request msg ACK/cseq=102 >>>>> (rdata0x21379ac) from UDP 192.168.1.190:5060: >>>>> ACK sip:1001 at 192.168.1.190:5090;ob SIP/2.0 >>>>> Via: SIP/2.0/UDP 192.168.1.190:5060;branch=z9hG4bK4dfc06e3;rport >>>>> Max-Forwards: 70 >>>>> From: "1004" <sip:1004@192.168.1.190>;tag=as16d63286 >>>>> To: <sip:1001 at 192.168.1.190:5090 >>>>> ;ob>;tag=fb79d2ca-876b-44eb-851d-533a590e3289 >>>>> Contact: <sip:1004 at 192.168.1.190:5060> >>>>> Call-ID: 6f30ba0b4fc6117d07745c7a2aeaa3a6 at 192.168.1.190:5060 >>>>> CSeq: 102 ACK >>>>> User-Agent: FPBX-12.0.43(13.2.0) >>>>> Content-Length: 0 >>>>> >>>>> >>>>> --end msg-- >>>>> 13:03:20.869 pjsua_app.c ...Call 0 state changed to CONFIRMED >>>>> 13:03:20.884 Master/sound Underflow, buf_cnt=0, will generate 1 >>>>> frame >>>>> 13:03:21.084 Master/sound Underflow, buf_cnt=0, will generate 1 >>>>> frame >>>>> 13:03:21.148 openh264.cpp Frame size changed: 720x480 --> 352x288 >>>>> 13:03:21.504 strm0x217f604 VAD re-enabled >>>>> 13:03:29.484 sound_port.c EC suspended because of inactivity >>>>> 13:03:30.280 pjsua_core.c .RX 466 bytes Request msg BYE/cseq=103 >>>>> (rdata0x21379ac) from UDP 192.168.1.190:5060: >>>>> BYE sip:1001 at 192.168.1.190:5090;ob SIP/2.0 >>>>> Via: SIP/2.0/UDP 192.168.1.190:5060;branch=z9hG4bK02497827;rport >>>>> Max-Forwards: 70 >>>>> From: "1004" <sip:1004@192.168.1.190>;tag=as16d63286 >>>>> To: <sip:1001 at 192.168.1.190:5090 >>>>> ;ob>;tag=fb79d2ca-876b-44eb-851d-533a590e3289 >>>>> Call-ID: 6f30ba0b4fc6117d07745c7a2aeaa3a6 at 192.168.1.190:5060 >>>>> CSeq: 103 BYE >>>>> User-Agent: FPBX-12.0.43(13.2.0) >>>>> X-Asterisk-HangupCause: Normal Clearing >>>>> X-Asterisk-HangupCauseCode: 16 >>>>> Content-Length: 0 >>>>> >>>>> >>>>> --end msg-- >>>>> 13:03:30.281 pjsua_core.c .......TX 337 bytes Response msg >>>>> 200/BYE/cseq=103 (tdta0x222b5f0) to UDP 192.168.1.190:5060: >>>>> SIP/2.0 200 OK >>>>> Via: SIP/2.0/UDP 192.168.1.190:5060 >>>>> ;rport=5060;received=192.168.1.190;branch=z9hG4bK02497827 >>>>> Call-ID: 6f30ba0b4fc6117d07745c7a2aeaa3a6 at 192.168.1.190:5060 >>>>> From: "1004" <sip:1004@192.168.1.190>;tag=as16d63286 >>>>> To: <sip:1001 at 192.168.1.190 >>>>> ;ob>;tag=fb79d2ca-876b-44eb-851d-533a590e3289 >>>>> CSeq: 103 BYE >>>>> Content-Length: 0 >>>>> >>>>> >>>>> --end msg-- >>>>> 13:03:30.281 pjsua_app.c ......Call 0 is DISCONNECTED [reason=200 >>>>> (Normal call clearing)] >>>>> 13:03:30.282 pjsua_app_comm ...... >>>>> [DISCONNCTD] To: "1004" <sip:1004 at 192.168.1.190>;tag=as16d63286 >>>>> Call time: 00h:00m:09s, 1st res in 31 ms, conn in 61ms >>>>> #0 audio PCMU @8kHz, sendrecv, peer=192.168.1.190:11686 >>>>> SRTP status: Not active Crypto-suite: >>>>> RX pt=0, last update:00h:00m:00.126s ago >>>>> total 466pkt 74.5KB (93.2KB +IP hdr) @avg=63.1Kbps/78.9Kbps >>>>> pkt loss=0 (0.0%), discrd=0 (0.0%), dup=0 (0.0%), reord=0 >>>>> (0.0%) >>>>> (msec) min avg max last dev >>>>> loss period: 0.000 0.000 0.000 0.000 0.000 >>>>> jitter : 0.000 1.774 5.875 2.125 1.593 >>>>> TX pt=0, ptime=20, last update:00h:00m:04.393s ago >>>>> total 172pkt 27.5KB (34.4KB +IP hdr) @avg=23.3Kbps/29.1Kbps >>>>> pkt loss=0 (0.0%), dup=0 (0.0%), reorder=0 (0.0%) >>>>> (msec) min avg max last dev >>>>> loss period: 0.000 0.000 0.000 0.000 0.000 >>>>> jitter : 15.875 15.875 15.875 15.875 0.000 >>>>> RTT msec : 1.037 1.037 1.037 1.037 0.000 >>>>> * #1 video H264, inactive, peer=192.168.1.190:13954 >>>>> <http://192.168.1.190:13954>* >>>>> * SRTP status: Not active Crypto-suite: * >>>>> RX last update:00h:00m:09.153s ago >>>>> total 944pkt 1.07MB (1.11MB +IP hdr) @avg=911.4Kbps/943.5Kbps >>>>> pkt loss=0 (0.0%), discrd=0 (0.0%), dup=0 (0.0%), reord=0 >>>>> (0.0%) >>>>> (msec) min avg max last dev >>>>> loss period: 0.000 0.000 0.000 0.000 0.000 >>>>> jitter : 0.011 1.038 3.211 1.566 0.769 >>>>> * TX last update:never* >>>>> * total 0pkt 0B (0B +IP hdr) @avg=0bps/0bps* >>>>> * pkt loss=0 (0.0%), dup=0 (0.0%), reorder=0 (0.0%)* >>>>> * (msec) min avg max last dev * >>>>> * loss period: 0.000 0.000 0.000 0.000 0.000* >>>>> * jitter : 0.000 0.000 0.000 0.000 0.000* >>>>> RTT msec : 0.000 0.000 0.000 0.000 0.000 >>>>> 13:03:30.282 pjsua_media.c ......Call 0: deinitializing media.. >>>>> 13:03:30.283 pjsua_media.c ........Media stream call00:0 is destroyed >>>>> 13:03:30.283 pjsua_vid.c ........Stopping video stream.. >>>>> 13:03:30.287 pjsua_media.c ........Media stream call00:1 is destroyed >>>>> 13:03:31.282 pjsua_aud.c Closing sound device after idle for 1 >>>>> second(s) >>>>> 13:03:31.282 pjsua_app.c .Turning sound device OFF >>>>> 13:03:31.283 pjsua_aud.c .Closing default:CARD=ALSA sound playback >>>>> device and default:CARD=U0x46d0x81b sound capture device >>>>> >>>>> >>>>> ----------------------------------------------------------------------------------------- >>>>> *VID_STREAMUTIL OUTPUT ( Streams the VIDEO )* >>>>> >>>>> sudo ./vid_streamutil --send-only --remote=192.168.1.191:4000 >>>>> 12:45:18.016 os_core_unix.c !pjlib 2.3 for POSIX initialized >>>>> 12:45:18.121 alsa_dev.c Added sound device default:CARD=ALSA >>>>> 12:45:18.124 alsa_dev.c Added sound device sysdefault:CARD=ALSA >>>>> 12:45:18.146 alsa_dev.c Added sound device >>>>> default:CARD=U0x46d0x81b >>>>> 12:45:18.163 alsa_dev.c Added sound device >>>>> sysdefault:CARD=U0x46d0x81b >>>>> 12:45:18.168 alsa_dev.c Added sound device >>>>> front:CARD=U0x46d0x81b,DEV=0 >>>>> 12:45:18.174 alsa_dev.c Added sound device >>>>> surround40:CARD=U0x46d0x81b,DEV=0 >>>>> 12:45:18.179 alsa_dev.c Added sound device >>>>> surround41:CARD=U0x46d0x81b,DEV=0 >>>>> 12:45:18.183 alsa_dev.c Added sound device >>>>> surround50:CARD=U0x46d0x81b,DEV=0 >>>>> 12:45:18.192 alsa_dev.c Added sound device >>>>> surround51:CARD=U0x46d0x81b,DEV=0 >>>>> 12:45:18.197 alsa_dev.c Added sound device >>>>> surround71:CARD=U0x46d0x81b,DEV=0 >>>>> 12:45:18.203 alsa_dev.c Added sound device >>>>> iec958:CARD=U0x46d0x81b,DEV=0 >>>>> 12:45:18.203 alsa_dev.c ALSA driver found 11 devices >>>>> 12:45:18.204 alsa_dev.c ALSA initialized >>>>> 12:45:18.253 pa_dev.c PortAudio sound library initialized, >>>>> status=0 >>>>> 12:45:18.253 pa_dev.c PortAudio host api count=2 >>>>> 12:45:18.253 pa_dev.c Sound device count=6 >>>>> 12:45:18.253 pjlib select() I/O Queue created (0x1d698ec) >>>>> 12:45:18.257 v4l2_dev.c Found capture device UVC Camera >>>>> (046d:081b) >>>>> 12:45:18.257 v4l2_dev.c Enumerating formats: >>>>> 12:45:18.257 v4l2_dev.c Supported: YUV 4:2:2 (YUYV) >>>>> 12:45:18.258 v4l2_dev.c Unsupported: MJPEG >>>>> 12:45:18.258 v4l2_dev.c Unsupported: RGB3 >>>>> 12:45:18.258 v4l2_dev.c Supported: BGR3 >>>>> 12:45:18.258 v4l2_dev.c Unsupported: YU12 >>>>> 12:45:18.258 v4l2_dev.c Unsupported: YV12 >>>>> 12:45:18.261 v4l2_dev.c Video4Linux2 has 1 devices >>>>> 12:45:18.261 colorbar_dev.c Colorbar video src initialized with 1 >>>>> device(s): >>>>> 12:45:18.261 colorbar_dev.c 0: Colorbar generator >>>>> 12:45:18.281 sdl_dev.c !SDL_Init() error: No available video >>>>> device >>>>> 12:45:18.282 openh264.cpp !OpenH264 codec initialized >>>>> 12:45:18.282 vid_port.c Opening device UVC Camera (046d:081b) >>>>> [v4l2] for capture: format=YUY2, size=720x480 @15:1 fps >>>>> 12:45:18.338 v4l2_dev.c mmap streaming initialized >>>>> 12:45:18.338 vid_port.c Device UVC Camera (046d:081b) [v4l2] >>>>> opened: format=YUY2, size=640x480 @15:1 fps >>>>> 12:45:18.341 openh264.cpp Opening codec.. >>>>> 12:45:18.360 rtp.c pjmedia_rtp_session_init: ses=0x1d720c0, >>>>> default_pt=97, ssrc=0x773f1b32 >>>>> 12:45:18.361 vstdec0x74cc60 Decoding channel created 720x480 >>>>> I420<-H264 22/1(~22)fps >>>>> 12:45:18.361 rtp.c pjmedia_rtp_session_init: ses=0x1d72154, >>>>> default_pt=97, ssrc=0x773f1b32 >>>>> 12:45:18.361 vstenc0x74cc60 Encoding channel created 720x480 >>>>> I420->H264 15/1(~15)fps >>>>> 12:45:18.361 udp0x1d75a58 SO_RCVBUF set to 163840 >>>>> 12:45:18.361 udp0x1d75a58 SO_SNDBUF set to 163840 >>>>> 12:45:18.362 vid_stream.c Video stream vstrm0x74cc607c created >>>>> 12:45:18.362 vstenc0x74cc60 Encoder stream started >>>>> 12:45:18.362 vstdec0x74cc60 Decoder stream paused >>>>> 12:45:18.362 v4l2_dev.c Starting v4l2 video stream UVC Camera >>>>> (046d:081b) >>>>> Stream is active, dir is send-only, sending to 192.168.1.91:4000 >>>>> 12:45:18.373 vid_streamutil Sending 720x480 H264 @15.00fps >>>>> >>>>> Commands: >>>>> q Quit >>>>> >>>>> Command: q >>>>> 12:45:40.115 v4l2_dev.c Stopping v4l2 video stream UVC Camera >>>>> (046d:081b) >>>>> 12:45:40.116 vid_port.c Closing UVC Camera (046d:081b).. >>>>> 12:45:40.116 v4l2_dev.c Stopping v4l2 video stream UVC Camera >>>>> (046d:081b) >>>>> 12:45:40.117 v4l2_dev.c Destroying v4l2 video stream UVC Camera >>>>> (046d:081b) >>>>> 12:45:40.123 vstdec0x74cc60 JB summary: >>>>> size=0/eff=0 prefetch=0 level=0 >>>>> delay (min/max/avg/dev)=0/0/0/0 ms >>>>> burst (min/max/avg/dev)=0/0/0/0 frames >>>>> lost=0 discard=0 empty=0 >>>>> 12:45:40.281 pa_dev.c PortAudio sound library shutting down.. >>>>> >>>>> >>>>> ----------------------------------------------------------------------------------------- >>>>> >>>>> Thank You >>>>> Best, >>>>> Chirag A. >>>>> >>>>> _______________________________________________ >>>>> Visit our blog: http://blog.pjsip.org >>>>> >>>>> pjsip mailing list >>>>> pjsip at lists.pjsip.org >>>>> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> Visit our blog: http://blog.pjsip.org >>>> >>>> pjsip mailing list >>>> pjsip at lists.pjsip.org >>>> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >>>> >>>> >>> >>> _______________________________________________ >>> Visit our blog: http://blog.pjsip.org >>> >>> pjsip mailing list >>> pjsip at lists.pjsip.org >>> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >>> >>> >> > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20150311/b55306b9/attachment.html>
