Linux USB Users

• Thread Index

• Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• RE: 回复: 回复: Re: [PATCH v20 3/5] usb: misc: Add onboard_usb_hub driver
  • From: "Linyu Yuan (QUIC)" <quic_linyyuan@xxxxxxxxxxx>
• [PATCH 4.14 2/2] usb: gadget: clear related members when goto fail
  • From: Hangyu Hua <hbh25y@xxxxxxxxx>
• [PATCH v2] usb:typec: Add sysfs support for Type C connector's physical location
  • From: Won Chung <wonchung@xxxxxxxxxx>
• [PATCH 4.14 1/2] usb: gadget: don't release an existing dev->buf
  • From: Hangyu Hua <hbh25y@xxxxxxxxx>
• [PATCH 4.14 0/2] usb: gadget: use after free in dev_config
  • From: Hangyu Hua <hbh25y@xxxxxxxxx>
• RE: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• Re: [RFT PATCH] xhci: make xhci_handshake timeout for xhci_reset() adjustable
  • From: Jack Pham <quic_jackp@xxxxxxxxxxx>
• Re: [PATCH 3/3] usb: dwc3: gadget: EP_DELAY_START is only handled for non isoc eps
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Segher Boessenkool <segher@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Matthew Wilcox <willy@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• Re: [PATCH] usb:typec: Add sysfs support for Type C connector's physical location
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Barnabás Pőcze <pobrn@xxxxxxxxxxxxxx>
• RE: [PATCH v5 3/7] PCI: Drop the `is_thunderbolt` attribute from PCI core
  • From: "Limonciello, Mario" <Mario.Limonciello@xxxxxxx>
• Re: [PATCH v5 3/7] PCI: Drop the `is_thunderbolt` attribute from PCI core
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/7] PCI: Drop the `is_thunderbolt` attribute from PCI core
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Segher Boessenkool <segher@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Jakob Koschel <jakobkoschel@xxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• Re: [PATCH] usb:typec: Add sysfs support for Type C connector's physical location
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Jakob Koschel <jakobkoschel@xxxxxxxxx>
• Re: [PATCH] dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH] dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Jeffrey Walton <noloader@xxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb:typec: Add sysfs support for Type C connector's physical location
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] usb: hcd: Try MSI interrupts on PCI devices
  • From: "andriy.shevchenko@xxxxxxxxxxxxxxx" <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1] usb: hcd: Try MSI interrupts on PCI devices
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] usb: hcd: Try MSI interrupts on PCI devices
  • From: micklorain <micklorain@xxxxxxxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Matthew Wilcox <willy@xxxxxxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] usb:typec: Add sysfs support for Type C connector's physical location
  • From: Won Chung <wonchung@xxxxxxxxxx>
• Re: [PATCH 1/6] drivers: usb: remove usage of list iterator past the loop body
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: 回复: 回复: Re: [PATCH v20 3/5] usb: misc: Add onboard_usb_hub driver
  • From: "mka@xxxxxxxxxxxx" <mka@xxxxxxxxxxxx>
• [PATCH v3] usb: dwc3: Don't switch OTG -> peripheral if extcon is present
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• RE: [PATCH v5 3/7] PCI: Drop the `is_thunderbolt` attribute from PCI core
  • From: "Limonciello, Mario" <Mario.Limonciello@xxxxxxx>
• [PATCH 2/3] usb: dwc3: gadget: move cmd_endtransfer to extra function
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 1/3] usb: dwc3: gadget: ep_queue simplify isoc start condition
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 0/3] usb: dwc3: gadget: simple refactoring patches
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 3/3] usb: dwc3: gadget: EP_DELAY_START is only handled for non isoc eps
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: usb: renesas,usbhs: Document RZ/V2L bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 2/2] usb: gadget: uvc: giveback vb2 buffer on req complete
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 1/2] usb: gadget: uvc: clean and rename uvcg_queue_next_buffer to uvcg_complete_buffer
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v4 3/8] dt-bindings: usb: add rk3568 compatible to rockchip, dwc3
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH v4 5/8] usb: dwc3: core: do not use 3.0 clock when operating in 2.0 mode
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH v4 0/8] enable usb support on rk356x
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH 1/6] drivers: usb: remove usage of list iterator past the loop body
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 6/6] treewide: remove check of list iterator against head past the loop body
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH AUTOSEL 5.10 04/23] usb: usb251xb: add boost-up property support
  • From: Richard Leitner <richard.leitner@xxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [RFT PATCH] xhci: make xhci_handshake timeout for xhci_reset() adjustable
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Jakob Koschel <jakobkoschel@xxxxxxxxx>
• Re: [PATCH 1/6] drivers: usb: remove usage of list iterator past the loop body
  • From: Jakob Koschel <jakobkoschel@xxxxxxxxx>
• Re: [PATCH 3/6] treewide: fix incorrect use to determine if list is empty
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [RFT PATCH] xhci: make xhci_handshake timeout for xhci_reset() adjustable
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2 v2] xhci: fix garbage USBSTS being logged in some cases
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/6] drivers: usb: remove usage of list iterator past the loop body
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5/6] treewide: remove dereference of list iterator after loop body
  • From: Jakob Koschel <jakobkoschel@xxxxxxxxx>
• [PATCH 3/6] treewide: fix incorrect use to determine if list is empty
  • From: Jakob Koschel <jakobkoschel@xxxxxxxxx>
• [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr
  • From: Jakob Koschel <jakobkoschel@xxxxxxxxx>
• [PATCH 1/6] drivers: usb: remove usage of list iterator past the loop body
  • From: Jakob Koschel <jakobkoschel@xxxxxxxxx>
• [PATCH 0/6] Remove usage of list iterator past the loop body
  • From: Jakob Koschel <jakobkoschel@xxxxxxxxx>
• [PATCH 4/6] drivers: remove unnecessary use of list iterator variable
  • From: Jakob Koschel <jakobkoschel@xxxxxxxxx>
• [PATCH 6/6] treewide: remove check of list iterator against head past the loop body
  • From: Jakob Koschel <jakobkoschel@xxxxxxxxx>
• Re: [PATCH v2] xhci: fix runtime PM imbalance in USB2 resume
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/7] PCI: Drop the `is_thunderbolt` attribute from PCI core
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: usb: renesas,usbhs: Document RZ/V2L bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH] USB: serial: pl2303: Add IBM device IDs
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [usbserial] device 0421:069a is supported, in fact.
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v2] USB: serial: simple: add Nokia phone driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2] usb: host: xhci-mtk: Simplify supplies handling with regulator_bulk
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• RE: 回复: 回复: Re: [PATCH v20 3/5] usb: misc: Add onboard_usb_hub driver
  • From: "Linyu Yuan (QUIC)" <quic_linyyuan@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: usb: Add bindings doc for Sunplus EHCI driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: [PATCH] dt-bindings: usb: renesas,usbhs: Document RZ/V2L bindings
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH] dt-bindings: usb: renesas,usbhs: Document RZ/V2L bindings
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: host: ehci-sunplus: Add driver for ehci in Sunplus SP7021
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 4/7] usb: dwc3: core: do not use 3.0 clock when operating in 2.0 mode
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH v3 0/7] enable usb support on rk356x
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: usb: Add bindings doc for Sunplus EHCI driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH v2 1/2] usb: host: ehci-sunplus: Add driver for ehci in Sunplus SP7021
  • From: Vincent Shih <vincent.sunplus@xxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: usb: Add bindings doc for Sunplus EHCI driver
  • From: Vincent Shih <vincent.sunplus@xxxxxxxxx>
• [PATCH v2 0/2] Add driver for ehci in Sunplus SP7021
  • From: Vincent Shih <vincent.sunplus@xxxxxxxxx>
• Re: [PATCH] USB: serial: simple: add Nokia phone driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 08/11] usb: dwc3: add rk3568 dwc3 support
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH v2 08/11] usb: dwc3: add rk3568 dwc3 support
  • From: Johan Jonker <jbx6244@xxxxxxxxx>
• [PATCH v2 07/11] usb: dwc3: convert dwc3-of-simple to use match-data
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH v2 06/11] usb: dwc3: reorder dwc-of-simple compatibles
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH v2 05/11] usb: dwc3: core: do not use 3.0 clock when operating in 2.0 mode
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH v2 08/11] usb: dwc3: add rk3568 dwc3 support
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH v2 03/11] dt-bindings: usb: dwc3: add description for rk3568
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH v2 00/11] enable usb support on rk356x
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH] USB: serial: simple: add Nokia phone driver
  • From: Felix Becker <linux.felixbecker2@xxxxxx>
• Re: [usbserial] device 0421:069a is supported, in fact.
  • From: Felix Becker <linux.felixbecker2@xxxxxx>
• Re: [PATCH v2] xhci: fix runtime PM imbalance in USB2 resume
  • From: Henry Lin <henryl@xxxxxxxxxx>
• Re: [PATCH v2] xhci: fix runtime PM imbalance in USB2 resume
  • From: Henry Lin <henryl@xxxxxxxxxx>
• [PATCH] usb: typec: tipd: Forward plug orientation to typec subsystem
  • From: Sven Peter <sven@xxxxxxxxxxxxx>
• [usb:usb-testing] BUILD SUCCESS f6a9a2d64dd168b7d71076c0e6b2be7db7cb7399
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v1 2/3] dt-bindings: usb: mtk-xhci: Allow wakeup interrupt-names to be optional
  • From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
• [PATCH v1 0/3] Fixes for Mediatek dt-bindings
  • From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/7] i2c: core: Use generic_handle_irq_safe() in i2c_handle_smbus_host_notify().
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [usb:usb-next] BUILD SUCCESS bc25c55812ff72cd3f2c310ba42f78a812dac95e
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [GIT PULL] USB fixes for 5.17-rc6
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v1 2/8] dt-bindings: usb: dwc3: add description for rk3568
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH v1 6/8] usb: dwc3: add rk3568 dwc3 support
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH v1 4/8] usb: dwc3: core: do not use 3.0 clock when operating in 2.0 mode
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• Re: [PATCH v5 3/7] PCI: Drop the `is_thunderbolt` attribute from PCI core
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v1 4/8] usb: dwc3: core: do not use 3.0 clock when operating in 2.0 mode
  • From: Jack Pham <quic_jackp@xxxxxxxxxxx>
• Re: [PATCH v1 6/8] usb: dwc3: add rk3568 dwc3 support
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• Re: [PATCH v5 3/7] PCI: Drop the `is_thunderbolt` attribute from PCI core
  • From: Alex Deucher <alexdeucher@xxxxxxxxx>
• Re: [PATCH v1 2/8] dt-bindings: usb: dwc3: add description for rk3568
  • From: Johan Jonker <jbx6244@xxxxxxxxx>
• [PATCH v1 4/8] usb: dwc3: core: do not use 3.0 clock when operating in 2.0 mode
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH v1 6/8] usb: dwc3: add rk3568 dwc3 support
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH v1 5/8] usb: dwc3: reorder dwc-of-simple compatibles
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH v1 2/8] dt-bindings: usb: dwc3: add description for rk3568
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH v1 0/8] enable usb support on rk356x
  • From: Peter Geis <pgwipeout@xxxxxxxxx>
• [PATCH] USB: core: Update kerneldoc for usb_get_dev() and usb_get_intf()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [GIT PULL] USB fixes for 5.17-rc6
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: gadget: tegra-xudc: Fix control endpoint's definitions
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH 1/1] usb: gadget: tegra-xudc: Do not program SPARAM
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH V2 2/2] Revert "arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector"
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [PATCH V2 1/2] Revert "arm64: dts: qcom: sc7280: Set the default dr_mode for usb2"
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [PATCH V2 0/2] Revert device tree changes for EUD
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [PATCH 1/2 v2] xhci: fix garbage USBSTS being logged in some cases
  • From: Anssi Hannula <anssi.hannula@xxxxxxxxxx>
• [Bug 215475] RMNET data connection speed would be reduced to about 80-100Mb/s from 150Mb/s if try to re-connect it
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [Resend PATCH V1 2/2] Revert "arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector"
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [Resend PATCH V1 1/2] Revert "arm64: dts: qcom: sc7280: Set the default dr_mode for usb2"
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v2] xhci: fix runtime PM imbalance in USB2 resume
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] HID: elo: Fix refcount leak in elo_probe()
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v2 03/10] dt-bindings: usb: qcom,dwc3: Add msm8953 compatible
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/9] usb/dwc3 / phy/tusb1210: Add TUSB1211 charger detection
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v5 2/9] dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet controllers
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2] xhci: fix runtime PM imbalance in USB2 resume
  • From: Henry Lin <henryl@xxxxxxxxxx>
• Re: [PATCH] xhci: fix runtime PM imbalance in USB2 resume
  • From: Henry Lin <henryl@xxxxxxxxxx>
• [PATCH] usb: gadget: uvc: add bulk transfer support
  • From: 3090101217@xxxxxxxxxx
• Re: [PATCH] xhci: fix runtime PM imbalance in USB2 resume
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: fix runtime PM imbalance in USB2 resume
  • From: Henry Lin <henryl@xxxxxxxxxx>
• Re: [PATCH] xhci: fix runtime PM imbalance in USB2 resume
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] xhci: fix runtime PM imbalance in USB2 resume
  • From: Henry Lin <henryl@xxxxxxxxxx>
• Re: [PATCH net-next v1 1/1] net: asix: remove code duplicates in asix_mdio_read/write and asix_mdio_read/write_nopm
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [usb:usb-linus] BUILD SUCCESS 19eae24b76c27dedfb166dc06a8c48e052cbc814
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• Re: [PATCH v5 3/7] PCI: Drop the `is_thunderbolt` attribute from PCI core
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v5 3/7] PCI: Drop the `is_thunderbolt` attribute from PCI core
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [usb:usb-testing] BUILD SUCCESS a352fa58c0ee5c91714cd31a36b5cd308085fcbf
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v5 6/7] drm/radeon: drop the use of `pci_is_thunderbolt_attached`
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH v5 7/7] PCI: drop `pci_is_thunderbolt_attached`
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH v5 4/7] drm/amd: drop the use of `pci_is_thunderbolt_attached`
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH v5 5/7] drm/nouveau: drop the use of `pci_is_thunderbolt_attached`
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH v5 1/7] PCI: Move `is_thunderbolt` check for lack of command completed to a quirk
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH v5 3/7] PCI: Drop the `is_thunderbolt` attribute from PCI core
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH v5 2/7] PCI: Move check for old Apple Thunderbolt controllers into a quirk
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH v5 0/7] Overhaul `is_thunderbolt`
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• Re: (subset) [PATCH v2 00/10] Initial MSM8953 & Fairphone 3 support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] usb: core: improve handling of hubs with no ports
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: core: improve handling of hubs with no ports
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v2 03/10] dt-bindings: usb: qcom,dwc3: Add msm8953 compatible
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] usb: core: improve handling of hubs with no ports
  • From: Jack Pham <quic_jackp@xxxxxxxxxxx>
• Re: [usbserial] device 0421:069a is supported, in fact.
  • From: Felix Becker <linux.felixbecker2@xxxxxx>
• Re: [PATCH] USB: serial: simple: add Nokia phone driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/9] dt-bindings: usb: ci-hdrc-usb2: fix node node for ethernet controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 2/9] dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet controllers
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 1/9] dt-bindings: net: add schema for ASIX USB Ethernet controllers
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] USB: serial: pl2303: Add IBM device IDs
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [GIT PULL] USB-serial fixes for 5.17-rc6
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [Bug 215579] [usbserial] device 0421:069a is in fact supported, please add to the list of devices supported by `usbserial`.
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [usbserial] device 0421:069a is supported, in fact.
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] USB: serial: simple: add Nokia phone driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [GIT PULL] USB-serial fixes for 5.17-rc6
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] xhci: omit mem read just after allocation of trb
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/5] USB: serial: make use of UART_LCR_WLEN() + tty_get_char_size()
  • From: Jiri Slaby <jslaby@xxxxxxx>
• Re: [RFT PATCH] xhci: make xhci_handshake timeout for xhci_reset() adjustable
  • From: Udipto Goswami <quic_ugoswami@xxxxxxxxxxx>
• Re: [PATCH] usb: core: improve handling of hubs with no ports
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: core: improve handling of hubs with no ports
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] usb: core: improve handling of hubs with no ports
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: misc: USB_QCOM_EUD should depend on ARCH_QCOM
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH] usb: core: improve handling of hubs with no ports
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] usb: core: improve handling of hubs with no ports
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/7] i2c: cht-wc: Use generic_handle_irq_safe().
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 2/7] i2c: core: Use generic_handle_irq_safe() in i2c_handle_smbus_host_notify().
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 0/7] Provide and use generic_handle_irq_safe() where appropriate.
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] usb: core: improve handling of hubs with no ports
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH net-next v1 1/1] net: asix: remove code duplicates in asix_mdio_read/write and asix_mdio_read/write_nopm
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [syzbot] KMSAN: uninit-value in asix_check_host_enable
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• [PATCH v6 2/2] usb: typec: anx7411: Add Analogix PD ANX7411 support
  • From: Xin Ji <xji@xxxxxxxxxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: usb: Add analogix anx7411 PD binding
  • From: Xin Ji <xji@xxxxxxxxxxxxxxxx>
• [syzbot] KMSAN: uninit-value in asix_check_host_enable
  • From: syzbot <syzbot+8f5f07bb9d6935e2f8d9@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] xhci: fix garbage USBSTS being logged in some cases
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: 回复: 回复: Re: [PATCH v20 3/5] usb: misc: Add onboard_usb_hub driver
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• 回复: 回复: Re: [PATCH v20 3/5] usb: misc: Add onboard_usb_hub driver
  • From: "Tao Wang (Consultant) (QUIC)" <quic_wat@xxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: drd: Add support for extcon drd notifier even with usb role switch config enabled
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: [PATCH v1] ACPI: bus: Introduce acpi_bus_for_each_dev()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: usb: gadget: rndis: add spinlock for rndis response list
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• [PATCH] usb: gadget: uvc: add different uvc versions support
  • From: 3090101217@xxxxxxxxxx
• Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH AUTOSEL 5.4 08/13] USB: zaurus: support another broken Zaurus
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 06/10] USB: zaurus: support another broken Zaurus
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 9/9] net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 13/13] net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 6/9] USB: zaurus: support another broken Zaurus
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 10/10] net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 08/13] USB: zaurus: support another broken Zaurus
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 13/13] net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 17/18] CDC-NCM: avoid overflow in sanity checking
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 27/28] net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 26/28] CDC-NCM: avoid overflow in sanity checking
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 11/18] USB: zaurus: support another broken Zaurus
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 18/18] net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 14/28] USB: zaurus: support another broken Zaurus
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 29/30] net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 28/30] CDC-NCM: avoid overflow in sanity checking
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 16/30] USB: zaurus: support another broken Zaurus
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH] usb: core: improve handling of hubs with no ports
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Re: [PATCH v2] usb: gadget: uvc: add framebased stream support
  • From: "Jing Leng" <3090101217@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: drd: Add support for extcon drd notifier even with usb role switch config enabled
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v2] usb: dwc3: Don't switch OTG -> peripheral if extcon is present
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: usb: dwc2: fix compatible of Intel Agilex
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: update Roger Quadros email
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: usb: do not use deprecated synopsys prefix
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: vendor-prefixes: add second Synopsys prefix
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: vendor-prefixes: add second HiSilicon prefix
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: usb: dwc2: add disable-over-current
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: usb: dwc2: add iommus
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: usb: dwc2: fix compatible of Intel Agilex
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 2/2] dt-bindings: usb: Add bindings doc for Sunplus EHCI driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 1/2] usb: host: ehci-sunplus: Add driver for ehci in Sunplus SP7021
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] usb: core: improve handling of hubs with no ports
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v1] ACPI: bus: Introduce acpi_bus_for_each_dev()
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• Re: 回复: Re: [PATCH v20 3/5] usb: misc: Add onboard_usb_hub driver
  • From: "mka@xxxxxxxxxxxx" <mka@xxxxxxxxxxxx>
• [PATCH 2/2] xhci: fix uninitialized string returned by xhci_decode_ctrl_ctx()
  • From: Anssi Hannula <anssi.hannula@xxxxxxxxxx>
• [PATCH 1/2] xhci: fix garbage USBSTS being logged in some cases
  • From: Anssi Hannula <anssi.hannula@xxxxxxxxxx>
• Re: [PATCH 1/2] usb: xhci: refactor quirks and plat private data
  • From: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: vendor-prefixes: add second HiSilicon prefix
  • From: Wei Xu <xuwei5@xxxxxxxxxxxxx>
• Re: [PATCH v2] usb: dwc3: Don't switch OTG -> peripheral if extcon is present
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• usb: gadget: rndis: add spinlock for rndis response list
  • From: Daehwan Jung <dh10.jung@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: update Roger Quadros email
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: vendor-prefixes: add second HiSilicon prefix
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v2] usb: dwc3: Don't switch OTG -> peripheral if extcon is present
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v2 1/6] device property: Helper to match multiple connections
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: Re: [PATCH] USB: serial: option: add support for DW5829e
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: serial: Fix Coding Style Error Around Ternary Operator
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: update Roger Quadros email
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• [PATCH][next] usbnet: gl620a: Replace one-element array with flexible-array member
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• Re: [PATCH v4 0/7] Provide and use generic_handle_irq_safe() where appropriate.
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re:Re: Re: [PATCH] USB: serial: option: add support for DW5829e
  • From: "Slark Xiao" <slark_xiao@xxxxxxx>
• Re: [PATCH v5 2/2] usb: typec: anx7411: Add Analogix PD ANX7411 support
  • From: Xin Ji <xji@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: serial: Fix Space Prohibited Coding Style Errors
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] dt-bindings: update Roger Quadros email
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH] Revert "USB: serial: ch341: add new Product ID for CH341A"
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2] Revert "USB: serial: ch341: add new Product ID for CH341A"
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: update Roger Quadros email
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH v4 0/7] Provide and use generic_handle_irq_safe() where appropriate.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] USB: serial: option: add support for DW5829e
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: update Roger Quadros email
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/1] USB: serial: option: add Telit LE910R1 compositions
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v4 0/7] Provide and use generic_handle_irq_safe() where appropriate.
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: Re: Re: [PATCH] USB: serial: option: add support for DW5829e
  • From: Johan Hovold <johan@xxxxxxxxxx>
• AW: ftdi_sio: Problem when changing the baud rate after a transfer
  • From: "embedded (VIVAVIS AG)" <embedded@xxxxxxxxxxx>
• Re: [PATCH v2 1/6] device property: Helper to match multiple connections
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: update Roger Quadros email
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH] Revert "USB: serial: ch341: add new Product ID for CH341A"
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: update Roger Quadros email
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: usb: gadget: function: add spinlock for rndis response list
  • From: Jung Daehwan <dh10.jung@xxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: vendor-prefixes: add second HiSilicon prefix
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH 2/3] dt-bindings: vendor-prefixes: add second Synopsys prefix
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH 3/3] dt-bindings: usb: do not use deprecated synopsys prefix
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] device property: Helper to match multiple connections
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: phy: qcom,usb-snps-femto-v2: Add phy override params bindings
  • From: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: gadget: Let the interrupt handler disable bottom halves.
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v2 03/10] dt-bindings: usb: qcom,dwc3: Add msm8953 compatible
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2 00/10] Initial MSM8953 & Fairphone 3 support
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2 2/2] usb: serial: Fix Coding Style Error Around Ternary Operator
  • From: Husni Faiz <ahamedhusni73@xxxxxxxxx>
• [PATCH v2 1/2] usb: serial: Fix Space Prohibited Coding Style Errors
  • From: Husni Faiz <ahamedhusni73@xxxxxxxxx>
• Re: [PATCH] thunderbolt: Retain host router DP IN resources during suspend
  • From: Sanjay R Mehta <sanmehta@xxxxxxx>
• Re: [PATCH v2 1/6] device property: Helper to match multiple connections
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH AUTOSEL 5.10 04/23] usb: usb251xb: add boost-up property support
  • From: Pavel Machek <pavel@xxxxxxx>
• [Bug 215561] snd-usb-audio:reset_resume error -22 after suspend
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 209555] dwc2 driver stops working after sudden disconnect
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 209555] dwc2 driver stops working after sudden disconnect
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: How to proceed: usci_acpi: PPM init failed (-110)
  • From: Samuel Čavoj <samuel@xxxxxxxxx>
• [PATCH v5 45/49] scsi: usb: Stop using the SCSI pointer
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 1/6] device property: Helper to match multiple connections
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH] usb: dwc3: gadget: Let the interrupt handler disable bottom halves.
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 3/4] dt-bindings: usb: dwc2: add disable-over-current
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH 2/4] dt-bindings: usb: dwc2: add iommus
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: usb: dwc2: fix compatible of Intel Agilex
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH 4/4] arm64: dts: agilex/stratix10: add clock-names to USB DWC2 node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH v5 4/4] arm64: dts: imx8mp: Add memory for USB3 glue layer to usb3 nodes
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• [PATCH v5 1/4] usb: dwc3: imx8mp: rename iomem base pointer
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• [PATCH v5 0/4] i.MX8MP: more USB3 glue layer feature support
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• [PATCH v5 2/4] dt-bindings: usb: dwc3-imx8mp: Add imx8mp specific flags
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• [PATCH v5 3/4] usb: dwc3: imx8mp: Add support for setting SOC specific flags
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH] thunderbolt: Retain host router DP IN resources during suspend
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] thunderbolt: Retain host router DP IN resources during suspend
  • From: Sanjay R Mehta <sanmehta@xxxxxxx>
• [PATCH 1/1] USB: serial: option: add Telit LE910R1 compositions
  • From: Daniele Palmas <dnlplm@xxxxxxxxx>
• Re: [PATCH 5/5] spi: make remove callback a void function
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: bug: usb: gadget: FSL_UDC_CORE Corrupted request list leads to unrecoverable loop.
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH V2] arm64: dts: qcom: sc7280: Set the default dr_mode for usb2 for EUD
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• Re: bug: usb: gadget: FSL_UDC_CORE Corrupted request list leads to unrecoverable loop.
  • From: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
• Re: [PATCH] thunderbolt: Retain host router DP IN resources during suspend
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] sr9700: sanity check for packet length
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: Re: [PATCH] usb: gadget: uvc: add framebased stream support
  • From: "Jing Leng" <3090101217@xxxxxxxxxx>
• [Resend PATCH V1 2/2] Revert "arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector"
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [Resend PATCH V1 1/2] Revert "arm64: dts: qcom: sc7280: Set the default dr_mode for usb2"
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [Resend PATCH V1 0/2] Revert device tree changes for EUD
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• Re: [PATCH v2 4/6] typec: mux: Allow multiple mux_devs per mux
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] typec: mux: Introduce indirection
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: bug: usb: gadget: FSL_UDC_CORE Corrupted request list leads to unrecoverable loop.
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: bug: usb: gadget: FSL_UDC_CORE Corrupted request list leads to unrecoverable loop.
  • From: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
• Re: [PATCH net-next] net: Correct wrong BH disable in hard-interrupt.
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH net-next] net: Correct wrong BH disable in hard-interrupt.
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v2 5/9] xhci: dbgtty: use IDR to support several dbc instances.
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH v4] usb: gadget: f_uac2: fix superspeed transfer
  • From: 3090101217@xxxxxxxxxx
• [PATCH v2] usb: gadget: f_uac1: add set requests support
  • From: 3090101217@xxxxxxxxxx
• Re: [RFT PATCH] xhci: make xhci_handshake timeout for xhci_reset() adjustable
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH net-next] net: Correct wrong BH disable in hard-interrupt.
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH] usb: dwc3: drd: Add support for extcon drd notifier even with usb role switch config enabled
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: (EXT) RE: [PATCH v4 3/4] usb: dwc3: imx8mp: Add support for setting SOC specific flags
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: omit mem read just after allocation of trb
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH V1 2/2] Revert "arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector"
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH V1 1/2] Revert "arm64: dts: qcom: sc7280: Set the default dr_mode for usb2"
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH V1 1/2] Revert "arm64: dts: qcom: sc7280: Set the default dr_mode for usb2"
  • From: Greg KH <greg@xxxxxxxxx>
• Re: usb: gadget: function: add spinlock for rndis response list
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH V1 2/2] Revert "arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector"
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [PATCH V1 1/2] Revert "arm64: dts: qcom: sc7280: Set the default dr_mode for usb2"
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [PATCH V1 0/2] Revert device tree changes for EUD
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [PATCH] thunderbolt: Retain host router DP IN resources during suspend
  • From: Sanjay R Mehta <Sanju.Mehta@xxxxxxx>
• Re: bug: usb: gadget: FSL_UDC_CORE Corrupted request list leads to unrecoverable loop.
  • From: Thorsten Leemhuis <regressions@xxxxxxxxxxxxx>
• RE: [PATCH v4 4/4] arm64: dts: imx8mp: Add memory for USB3 glue layer to usb3 nodes
  • From: Jun Li <jun.li@xxxxxxx>
• RE: [PATCH v4 3/4] usb: dwc3: imx8mp: Add support for setting SOC specific flags
  • From: Jun Li <jun.li@xxxxxxx>
• usb: gadget: function: add spinlock for rndis response list
  • From: Daehwan Jung <dh10.jung@xxxxxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS 32fde84362c40961726a5c91f35ad37355ccc0c6
  • From: kernel test robot <lkp@xxxxxxxxx>
• [usb:usb-testing] BUILD SUCCESS a5d847b0afd317df1ed0e3b72fbef72ce4824532
  • From: kernel test robot <lkp@xxxxxxxxx>
• RE: [PATCH v4 1/4] usb: dwc3: imx8mp: rename iomem base pointer
  • From: Jun Li <jun.li@xxxxxxx>
• Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Jung Daehwan <dh10.jung@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v10 6/6] usb: dwc3: qcom: Enable the interrupts during probe
  • From: Steev Klimaszewski <steev@xxxxxxxx>
• Re: [PATCH v3 05/12] PCI: Detect root port of internal USB4 devices by `usb4-host-interface`
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH] sr9700: sanity check for packet length
  • From: Grant Grundler <grundler@xxxxxxxxxxxx>
• Re: [RFC PATCH v2 3/3] usb: dwc3: Issue core soft reset before enabling run/stop
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v21 3/3] usb: core: hcd: Create platform devices for onboard hubs in probe()
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v21 1/3] of/platform: Add stubs for of_platform_device_create/destroy()
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v21 0/3] usb: misc: Add onboard_usb_hub driver
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v21 2/3] usb: misc: Add onboard_usb_hub driver
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v2] usb: host: ehci-q: make qtd_fill() return *unsigned int*
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] usb: host: ehci-q: make qtd_fill() return *unsigned int*
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• Re: [PATCH V1] arm64: dts: qcom: sc7280: Set the default dr_mode for usb2 to enable EUD.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v2 0/9] usb/dwc3 / phy/tusb1210: Add TUSB1211 charger detection
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: f_uac1: add set requests support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: gadget: uvc: add framebased stream support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] HID: elo: Fix refcount leak in elo_probe()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: gadget: f_uac2: fix superspeed transfer
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/9] xhci: dbgtty: use IDR to support several dbc instances.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: Linux logs error `3:3: cannot set freq 24000 to ep 0x82`
  • From: James <bjlockie@xxxxxxxxx>
• Re: Linux logs error `3:3: cannot set freq 24000 to ep 0x82`
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• Re: [PATCH] tps6598x: clear int mask on probe failure
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [RFT PATCH] xhci: make xhci_handshake timeout for xhci_reset() adjustable
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH] tps6598x: clear int mask on probe failure
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: (EXT) [PATCH] usb: dwc3: drd: Don't check against CONFIG_OF
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• [PATCH] xhci: omit mem read just after allocation of trb
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [syzbot] INFO: task hung in usbnet_disconnect
  • From: syzbot <syzbot+2fc20706c90534c035a5@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] HID: elo: Fix refcount leak in elo_probe()
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• [PATCH] sr9700: sanity check for packet length
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Linux logs error `3:3: cannot set freq 24000 to ep 0x82`
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• [PATCH v2] usb: gadget: uvc: add framebased stream support
  • From: 3090101217@xxxxxxxxxx
• Re: malicious devices causing unaligned accesses [v2]
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [RFC] sierra: avoid trailing bytes leading to garbage parsing
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [RFC] sierra: avoid trailing bytes leading to garbage parsing
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: malicious devices causing unaligned accesses [v2]
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [RFC PATCH v2 3/3] usb: dwc3: Issue core soft reset before enabling run/stop
  • From: Jung Daehwan <dh10.jung@xxxxxxxxxxx>
• Re: [PATCH v4 00/10] Overhaul `is_thunderbolt`
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• RE: [PATCH] usb: host: ehci-q: make qtd_fill() return 'u16'
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH] usb: host: ehci-q: make qtd_fill() return 'u16'
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• malicious devices causing unaligned accesses [v2]
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• malicious devices causing unaligned accesses
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH] tps6598x: clear int mask on probe failure
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH] HID: elo: Fix refcount leak in elo_probe()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] HID: elo: Fix refcount leak in elo_probe()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] HID: elo: Fix refcount leak in elo_probe()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v1 3/3] usb: typec: ucsi: Register USB Power Delivery Capabilities
  • From: Jack Pham <quic_jackp@xxxxxxxxxxx>
• [PATCH v3] usb: gadget: f_uac2: fix superspeed transfer
  • From: "Jing Leng" <3090101217@xxxxxxxxxx>
• [PATCH v3] usb: gadget: f_uac2: fix superspeed transfer
  • From: 3090101217@xxxxxxxxxx
• Re: [RFC PATCH v2 3/3] usb: dwc3: Issue core soft reset before enabling run/stop
  • From: Jung Daehwan <dh10.jung@xxxxxxxxxxx>
• [PATCH v4] usb: gadget: f_uac1: add different speed transfers support
  • From: 3090101217@xxxxxxxxxx
• Re: Re: [PATCH v3] usb: gadget: f_uac1: add different speed transfers support
  • From: "Jing Leng" <3090101217@xxxxxxxxxx>
• Re: earlyprintk=xdbc seems broken
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v3] usb: gadget: f_uvc: add superspeed plus transfer support
  • From: 3090101217@xxxxxxxxxx
• Re: [PATCH v2] xhci: reduce xhci_handshake timeout in xhci_reset
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH v2] usb: gadget: f_uvc: fix superspeedplus transfer
  • From: "Jing Leng" <3090101217@xxxxxxxxxx>
• Re: [PATCH] usb: host: ehci-q: make qtd_fill() return 'u16'
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: f_uac1: add set requests support
  • From: "Jing Leng" <3090101217@xxxxxxxxxx>
• [PATCH v2 5/5] usb: host: xhci: remove init to some ret/retval
  • From: Linyu Yuan <quic_linyyuan@xxxxxxxxxxx>
• [PATCH v2 4/5] usb: host: xhci: add blank line in xhci_halt()
  • From: Linyu Yuan <quic_linyyuan@xxxxxxxxxxx>
• [PATCH v2 2/5] usb: host: xhci: fix a comment typo in xhci_mem_init()
  • From: Linyu Yuan <quic_linyyuan@xxxxxxxxxxx>
• [PATCH v2 3/5] usb: host: xhci: update hci_version operation in xhci_gen_setup()
  • From: Linyu Yuan <quic_linyyuan@xxxxxxxxxxx>
• [PATCH v2 0/5] usb: xhci: fix of some code/comment
  • From: Linyu Yuan <quic_linyyuan@xxxxxxxxxxx>
• [PATCH v2 1/5] usb: host: xhci: use ffs() in xhci_mem_init()
  • From: Linyu Yuan <quic_linyyuan@xxxxxxxxxxx>
• RE: [PATCH] usb: host: ehci-q: make qtd_fill() return 'u16'
  • From: David Laight <David.Laight@xxxxxxxxxx>
• [PATCH v4 46/50] scsi: usb: Stop using the SCSI pointer
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH] usb: host: ehci-q: make qtd_fill() return 'u16'
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• Re: [PATCH v20 5/5] arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] usb: gadget: uvc: add framebased stream support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 00/10] Overhaul `is_thunderbolt`
  • From: "Limonciello, Mario" <mario.limonciello@xxxxxxx>
• Re: [PATCH v2] xhci: reduce xhci_handshake timeout in xhci_reset
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• Re: [PATCH v2] xhci: reduce xhci_handshake timeout in xhci_reset
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 00/10] Overhaul `is_thunderbolt`
  • From: Alex Deucher <alexdeucher@xxxxxxxxx>
• Re: [PATCH v4 00/10] Overhaul `is_thunderbolt`
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: xhci: make 'usec' parameter of xhci_handshake() *unsigned*
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• Re: [PATCH] usb: host: xhci: make 'usec' parameter of xhci_handshake() *unsigned*
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] usb: host: ehci-sunplus: Add driver for ehci in Sunplus SP7021
  • From: 施錕鴻 <vincent.sunplus@xxxxxxxxx>
• Re: [PATCH v2] usb: gadget: f_uvc: fix superspeedplus transfer
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: gadget: f_uac1: add different speed transfers support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: f_uac1: add set requests support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] usb: host: xhci: use ffs() in xhci_mem_init()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] usb: host: xhci: use ffs() in xhci_mem_init()
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
• RE: [PATCH 1/5] usb: host: xhci: use ffs() in xhci_mem_init()
  • From: "Linyu Yuan (QUIC)" <quic_linyyuan@xxxxxxxxxxx>
• Re: [PATCH 1/5] usb: host: xhci: use ffs() in xhci_mem_init()
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
• Re: [PATCH v10 6/6] usb: dwc3: qcom: Enable the interrupts during probe
  • From: Steev Klimaszewski <steev@xxxxxxxx>
• [PATCH v2 9/9] usb: xhci: fix minmax.cocci warnings
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH v2 7/9] usb: remove Link Powermanagement (LPM) disable before port reset.
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH v2 3/9] xhci: dbc: Rename xhci_dbc_init and xhci_dbc_exit
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH v2 5/9] xhci: dbgtty: use IDR to support several dbc instances.
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH v2 8/9] usb: host: xhci: drop redundant checks
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH v2 6/9] xhci: Allocate separate command structures for each LPM command
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH v2 4/9] xhci: dbc: Don't call dbc_tty_init() on every dbc tty probe
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH v2 0/9] xhci and hub features for usb-next
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH v2 2/9] xhci: dbc: create and remove dbc structure in dbgtty driver.
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH v2 1/9] xhci: dbc: refactor xhci_dbc_init()
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• RE: [PATCH 1/5] usb: host: xhci: use ffs() in xhci_mem_init()
  • From: "Linyu Yuan (QUIC)" <quic_linyyuan@xxxxxxxxxxx>
• [PATCH] usb: gadget: f_uac1: add set requests support
  • From: 3090101217@xxxxxxxxxx
• Re: [PATCH 1/5] usb: host: xhci: use ffs() in xhci_mem_init()
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: mediatek: mt8195: add efuse node and cells
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: [PATCH 0/9] xhci and hub features for usb-next
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 9/9] usb: xhci: fix minmax.cocci warnings
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 6/9] xhci: Allocate separate command structures for each LPM command
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 7/9] usb: remove Link Powermanagement (LPM) disable before port reset.
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 3/9] xhci: dbc: Rename xhci_dbc_init and xhci_dbc_exit
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 5/9] xhci: dbgtty: use IDR to support several dbc instances.
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 4/9] xhci: dbc: Don't call dbc_tty_init() on every dbc tty probe
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 8/9] usb: host: xhci: drop redundant checks
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 1/9] xhci: dbc: refactor xhci_dbc_init()
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 2/9] xhci: dbc: create and remove dbc structure in dbgtty driver.
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 0/9] xhci and hub features for usb-next
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] usb: typec: Support the WUSB3801 port controller
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] usb: typec: Factor out non-PD fwnode properties
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: dwc: host: add xhci_plat_priv quirk XHCI_SKIP_PHY_INIT
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH 2/2] usb: dwc: host: add xhci_plat_priv quirk XHCI_SKIP_PHY_INIT
  • From: Jun Li <lijun.kernel@xxxxxxxxx>
• [PATCH] usb: gadget: uvc: add framebased stream support
  • From: 3090101217@xxxxxxxxxx
• [PATCH v3] usb: dwc2: drd: fix soft connect when gadget is unconfigured
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH 2/2] usb: dwc: host: add xhci_plat_priv quirk XHCI_SKIP_PHY_INIT
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• [PATCH v5 8/9] ARM: dts: tegra20/30: fix ethernet node name for different tegra boards
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 6/9] ARM: dts: exynos: fix compatible strings for Ethernet USB devices
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 0/8] document dt-schema and fix node names for some USB Ethernet controllers
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 1/9] dt-bindings: net: add schema for ASIX USB Ethernet controllers
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 9/9] arm64: dts: imx8mm-kontron: fix ethernet node name
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 7/9] ARM: dts: omap3/4/5: fix ethernet node name for different OMAP boards
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 5/9] ARM: dts: exynos: fix ethernet node name for different odroid boards
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 3/9] dt-bindings: usb: ci-hdrc-usb2: fix node node for ethernet controller
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 2/9] dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet controllers
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 4/9] ARM: dts: bcm283x: fix ethernet node name
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: phy: qcom,usb-snps-femto-v2: Add phy override params bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v20 5/5] arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 4/8] ARM: dts: bcm283x: fix ethernet node name
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: dwc: host: add xhci_plat_priv quirk XHCI_SKIP_PHY_INIT
  • From: Jun Li <lijun.kernel@xxxxxxxxx>
• [PATCH 4/5] usb: host: xhci: add blank line in xhci_halt()
  • From: Linyu Yuan <quic_linyyuan@xxxxxxxxxxx>
• [PATCH 2/5] usb: host: xhci: fix a comment typo in xhci_mem_init()
  • From: Linyu Yuan <quic_linyyuan@xxxxxxxxxxx>
• [PATCH 3/5] usb: host: xhci: update hci_version operation in xhci_gen_setup()
  • From: Linyu Yuan <quic_linyyuan@xxxxxxxxxxx>
• [PATCH 5/5] usb: host: xhci: remove init to some ret/retval
  • From: Linyu Yuan <quic_linyyuan@xxxxxxxxxxx>
• [PATCH 0/5] usb: xhci: fix of some code/comment
  • From: Linyu Yuan <quic_linyyuan@xxxxxxxxxxx>
• [PATCH 1/5] usb: host: xhci: use ffs() in xhci_mem_init()
  • From: Linyu Yuan <quic_linyyuan@xxxxxxxxxxx>
• Re: [PATCH v10 6/6] usb: dwc3: qcom: Enable the interrupts during probe
  • From: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
• Re: [PATCH v3 5/8] ARM: dts: exynos: fix ethernet node name for different odroid boards
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: phy: qcom,usb-snps-femto-v2: Add phy override params bindings
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH v10 6/6] usb: dwc3: qcom: Enable the interrupts during probe
  • From: Steev Klimaszewski <steev@xxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS 243a1dd7ba48c120986dd9e66fee74bcb7751034
  • From: kernel test robot <lkp@xxxxxxxxx>
• [usb:usb-testing] BUILD SUCCESS 9902951f536c00b7f20c26fd98baa5432bb3c731
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] usb: gadget: f_uvc: fix superspeedplus transfer
  • From: 冷静 <3090101217@xxxxxxxxxx>
• Re: [PATCH v3] usb: gadget: f_uac1: add different speed transfers support
  • From: 冷静 <3090101217@xxxxxxxxxx>
• Re: [PATCH 2/2] usb: dwc: host: add xhci_plat_priv quirk XHCI_SKIP_PHY_INIT
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: xhci: refactor quirks and plat private data
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: phy: qcom,usb-snps-femto-v2: Add phy override params bindings
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3] extcon: fix extcon_get_extcon_dev() error handling
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [RFC PATCH v2 2/3] usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [RFC PATCH v2 3/3] usb: dwc3: Issue core soft reset before enabling run/stop
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [RFC PATCH v2 1/3] usb: dwc3: Flush pending SETUP data during stop active xfers
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [RFC PATCH v2 0/3] Fix enumeration issues during composition switching
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH] usb: dwc3: drd: Don't check against CONFIG_OF
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v3 5/8] ARM: dts: exynos: fix ethernet node name for different odroid boards
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v3 4/8] ARM: dts: bcm283x: fix ethernet node name
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH] usb: host: xhci: make 'usec' parameter of xhci_handshake() *unsigned*
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• Re: [PATCH 1/3] dt-bindings: phy: qcom,usb-snps-femto-v2: Add phy override params bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: sc7280: Update SNPS Phy params for SC7280 IDP device
  • From: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
• [PATCH 2/3] phy: qcom-snps: Add support for overriding phy tuning parameters
  • From: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
• [PATCH 0/3] Add QCOM SNPS PHY overriding params support
  • From: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: phy: qcom,usb-snps-femto-v2: Add phy override params bindings
  • From: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
• Re: [PATCH v20 5/5] arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v4 00/10] Overhaul `is_thunderbolt`
  • From: "Limonciello, Mario" <mario.limonciello@xxxxxxx>
• Re: [PATCH v20 5/5] arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] usb: dwc: host: add xhci_plat_priv quirk XHCI_SKIP_PHY_INIT
  • From: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
• [PATCH 1/2] usb: xhci: refactor quirks and plat private data
  • From: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
• [PATCH 0/2] Refactor xhci quirks and plat private data
  • From: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
• [PATCH] tps6598x: clear int mask on probe failure
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH v20 3/5] usb: misc: Add onboard_usb_hub driver
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] thunderbolt: test: get running under UML, add kunitconfig
  • From: Daniel Latypov <dlatypov@xxxxxxxxxx>
• Re: [PATCH v20 5/5] arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2] usb: dwc2: drd: fix soft connect when gadget is unconfigured
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v2] xhci: reduce xhci_handshake timeout in xhci_reset
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH] usb: host: ehci-platform: Update brcm, xgs-iproc-ehci workaround
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH AUTOSEL 5.16 06/34] usb: usb251xb: add boost-up property support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/7] Provide and use generic_handle_irq_safe() where appropriate.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v5 2/2] usb: typec: anx7411: Add Analogix PD ANX7411 support
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/7] Provide and use generic_handle_irq_safe() where appropriate.
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v2] usb: dwc2: drd: fix soft connect when gadget is unconfigured
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH AUTOSEL 5.10 21/23] net: usb: qmi_wwan: Add support for Dell DW5829e
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 31/33] net: usb: qmi_wwan: Add support for Dell DW5829e
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 03/17] usb: usb251xb: add boost-up property support
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v4 0/7] Provide and use generic_handle_irq_safe() where appropriate.
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.14 4/5] net: usb: qmi_wwan: Add support for Dell DW5829e
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 04/23] usb: usb251xb: add boost-up property support
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 02/11] usb: usb251xb: add boost-up property support
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 06/33] usb: usb251xb: add boost-up property support
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 10/11] net: usb: qmi_wwan: Add support for Dell DW5829e
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 32/34] net: usb: qmi_wwan: Add support for Dell DW5829e
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 3/3] net: usb: qmi_wwan: Add support for Dell DW5829e
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 15/17] net: usb: qmi_wwan: Add support for Dell DW5829e
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 06/34] usb: usb251xb: add boost-up property support
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v4 0/7] Provide and use generic_handle_irq_safe() where appropriate.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] CDC-NCM: avoid overflow in sanity checking
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v4 0/7] Provide and use generic_handle_irq_safe() where appropriate.
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] net: hso: Use GFP_KERNEL instead of GFP_ATOMIC when possible
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v4 0/7] Provide and use generic_handle_irq_safe() where appropriate.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3] usb: gadget: f_uac1: add different speed transfers support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: gadget: f_uvc: fix superspeedplus transfer
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: dwc2: drd: fix soft connect when gadget is unconfigured
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] CDC-NCM: avoid overflow in sanity checking
  • From: Greg KH <gregKH@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] usb: typec: anx7411: Add Analogix PD ANX7411 support
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v6] xhci: re-initialize the HC during resume if HCE was set
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 3/3] usb: typec: ucsi: Register USB Power Delivery Capabilities
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 2/2] xhci: Prevent futile URB re-submissions due to incorrect return value.
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 1/2] xhci: re-initialize the HC during resume if HCE was set
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 0/2] xhci fixes for usb-linus
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v6] xhci: re-initialize the HC during resume if HCE was set
  • From: Puma Hsu <pumahsu@xxxxxxxxxx>
• question on ca139d76b0d9e in cx82310_rx_fixup()
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH 1/1] net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
  • From: Daniele Palmas <dnlplm@xxxxxxxxx>
• [syzbot] general protection fault in __media_entity_remove_link
  • From: syzbot <syzbot+3a40339fb2628236d307@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] usb: dwc2: drd: fix soft connect when gadget is unconfigured
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [RFC] aqc111: check for valid header length before parsing
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v4 1/8] dt-bindings: net: add schema for ASIX USB Ethernet controllers
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2] xhci: reduce xhci_handshake timeout in xhci_reset
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• [syzbot] KMSAN: uninit-value in ax88179_led_setting
  • From: syzbot <syzbot+d3dbdf31fbe9d8f5f311@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] CDC-NCM: avoid overflow in sanity checking
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• possible race condition with PM entering test mode
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v2] xhci: reduce xhci_handshake timeout in xhci_reset
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH v4 8/8] arm64: dts: imx8mm-kontron: fix ethernet node name
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 1/8] dt-bindings: net: add schema for ASIX USB Ethernet controllers
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 7/8] ARM: dts: tegra20/30: fix ethernet node name for different tegra boards
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 6/8] ARM: dts: omap3/4/5: fix ethernet node name for different OMAP boards
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 2/8] dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet controllers
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 0/8] document dt-schema and fix node names for some USB Ethernet controllers
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 3/8] dt-bindings: usb: ci-hdrc-usb2: fix node node for ethernet controller
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 4/8] ARM: dts: bcm283x: fix ethernet node name
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 5/8] ARM: dts: exynos: fix ethernet node name for different odroid boards
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v2] xhci: reduce xhci_handshake timeout in xhci_reset
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v10 6/6] usb: dwc3: qcom: Enable the interrupts during probe
  • From: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
• Re: [PATCH v2] xhci: reduce xhci_handshake timeout in xhci_reset
  • From: Jung Daehwan <dh10.jung@xxxxxxxxxxx>
• Re: [PATCH v3 5/8] ARM: dts: exynos: fix ethernet node name for different odroid boards
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Jung Daehwan <dh10.jung@xxxxxxxxxxx>
• Re: [PATCH v3 5/8] ARM: dts: exynos: fix ethernet node name for different odroid boards
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v3 5/8] ARM: dts: exynos: fix ethernet node name for different odroid boards
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v3 6/8] ARM: dts: omap3/4/5: fix ethernet node name for different OMAP boards
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 7/8] ARM: dts: tegra20/30: fix ethernet node name for different tegra boards
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 5/8] ARM: dts: exynos: fix ethernet node name for different odroid boards
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 2/8] dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet controllers
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 3/8] dt-bindings: usb: ci-hdrc-usb2: fix node node for ethernet controller
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 8/8] arm64: dts: imx8mm-kontron: fix ethernet node name
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 4/8] ARM: dts: bcm283x: fix ethernet node name
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 1/8] dt-bindings: net: add schema for ASIX USB Ethernet controllers
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 00/10] Overhaul `is_thunderbolt`
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Jung Daehwan <dh10.jung@xxxxxxxxxxx>
• Re: [syzbot] KASAN: use-after-free Read in ath9k_hif_usb_reg_in_cb (3)
  • From: syzbot <syzbot+b05dabaed0b1f0b0a5e4@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Jung Daehwan <dh10.jung@xxxxxxxxxxx>
• Re: [PATCH] thunderbolt: test: get running under UML, add kunitconfig
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] thunderbolt: test: get running under UML, add kunitconfig
  • From: David Gow <davidgow@xxxxxxxxxx>
• Re: [PATCH v1 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Jung Daehwan <dh10.jung@xxxxxxxxxxx>
• Re: [PATCH v5 2/2] usb: typec: anx7411: Add Analogix PD ANX7411 support
  • From: Xin Ji <xji@xxxxxxxxxxxxxxxx>
• [PATCH V1] arm64: dts: qcom: sc7280: Set the default dr_mode for usb2 to enable EUD.
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [Bug 210425] Plugging in or unplugging power cord while system is suspended does not trigger updates
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH] xhci: reduce xhci_handshake timeout in xhci_reset
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• [PATCH v3] usb: gadget: f_uac1: add different speed transfers support
  • From: 3090101217@xxxxxxxxxx
• Re: [PATCH] thunderbolt: test: get running under UML, add kunitconfig
  • From: Daniel Latypov <dlatypov@xxxxxxxxxx>
• [PATCH v2] usb: gadget: f_uvc: fix superspeedplus transfer
  • From: 3090101217@xxxxxxxxxx
• [usb:usb-testing] BUILD SUCCESS 4378e427f70577da86b41bb3380dbe237b6aa4d5
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] usb: host: ehci-platform: Update brcm, xgs-iproc-ehci workaround
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 10/10] PCI: drop `pci_is_thunderbolt_attached`
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH v4 08/10] drm/nouveau: drop the use of `pci_is_thunderbolt_attached`
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH v4 09/10] drm/radeon: drop the use of `pci_is_thunderbolt_attached`
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH v4 05/10] PCI: Move check for old Apple Thunderbolt controllers into a quirk
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH v4 07/10] drm/amd: drop the use of `pci_is_thunderbolt_attached`
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH v4 06/10] PCI: Drop the `is_thunderbolt` attribute from PCI core
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH v4 03/10] PCI: Detect root port of internal USB4 controllers
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH v4 04/10] PCI: Detect PCIe root ports for discrete USB4 controllers
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH v4 02/10] PCI: Move `is_thunderbolt` check for lack of command completed to a quirk
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH v4 01/10] PCI: Add USB4 class definition
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH v4 00/10] Overhaul `is_thunderbolt`
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• Re: [PATCH 1/2] drm: Add HPD state to drm_connector_oob_hotplug_event()
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] usb: host: {e|o}hci-dbg: kill useless 'ret' variable initializers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] CDC-NCM: avoid overflow in sanity checking
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH v2] usb: host: xhci-hub: drop redundant PORTSC register read
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• [PATCH] net: hso: Use GFP_KERNEL instead of GFP_ATOMIC when possible
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [RFC] CDC-NCM: avoid overflow in sanity checking
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH] usb: host: {e|o}hci-dbg: kill useless 'ret' variable initializers
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• [usb:usb-next] BUILD SUCCESS fbd533e90d239e17d9427a6481ae60be25680cb7
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v1 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH] usb: host: xhci-hub: drop redundant port register reads
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• [PATCH] thunderbolt: test: get running under UML, add kunitconfig
  • From: Daniel Latypov <dlatypov@xxxxxxxxxx>
• Re: [PATCH 1/2] drm: Add HPD state to drm_connector_oob_hotplug_event()
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: [PATCH] xhci: reduce xhci_handshake timeout in xhci_reset
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
• Re: [PATCH v2] usb: gadget: f_uac2: fix superspeed transfer
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: gadget: f_uac1: add different speed transfers support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3] USB: zaurus: support another broken Zaurus
  • From: Greg KH <gregKH@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] HID: elo: Fix refcount leak in elo_probe()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3] USB: zaurus: support another broken Zaurus
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH v2] usb: gadget: f_uac2: fix superspeed transfer
  • From: 3090101217@xxxxxxxxxx
• [PATCH] usb: dwc3: pci: add support for the Intel Raptor Lake-S
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv3] USB: zaurus: support another broken Zaurus
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH v2] usb: gadget: f_uac1: add different speed transfers support
  • From: 3090101217@xxxxxxxxxx
• Re: [PATCH v2] xhci: reduce xhci_handshake timeout in xhci_reset
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH v2] xhci: reduce xhci_handshake timeout in xhci_reset
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• [Bug 215561] snd-usb-audio:reset_resume error -22 after suspend
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v2] xhci: reduce xhci_handshake timeout in xhci_reset
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [Bug 215561] snd-usb-audio:reset_resume error -22 after suspend
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v2] xhci: reduce xhci_handshake timeout in xhci_reset
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] xhci: reduce xhci_handshake timeout in xhci_reset
  • From: Pavankumar Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH] xhci: reduce xhci_handshake timeout in xhci_reset
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: dwc3: Not set DWC3_EP_END_TRANSFER_PENDING in ep cmd fails
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: dwc3: Prevent cleanup cancelled requests at the same time.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: reduce xhci_handshake timeout in xhci_reset
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>