On some situations, software handles TRB events slower than adding TRBs,
xhci_irq will not exit until all events are handled. If xhci_irq just
handles 256 TRBs and exit, the temp variable(event_ring_deq) driver
records in xhci irq is equal to driver current dequeue pointer. It will
cause driver not update ERDP and software dequeue pointer lost sync with
ERDP. On the next xhci_irq, the event ring is full but driver will not
update ERDP as software dequeue pointer is equal to ERDP.
[ 536.377115] xhci_hcd 0000:00:12.0: ERROR unknown event type 37
[ 566.933173] sd 8:0:0:0: [sdb] tag#27 uas_eh_abort_handler 0 uas-tag 7
inflight: CMD OUT
[ 566.933181] sd 8:0:0:0: [sdb] tag#27 CDB: Write(10) 2a 00 17 71 e6 78
00 00 08 00
[ 572.041186] xhci_hcd On some situataions,the0000:00:12.0: xHCI host
not responding to stop endpoint command.
[ 572.057193] xhci_hcd 0000:00:12.0: Host halt failed, -110
[ 572.057196] xhci_hcd 0000:00:12.0: xHCI host controller not
responding, assume dead
[ 572.057236] sd 8:0:0:0: [sdb] tag#26 uas_eh_abort_handler 0 uas-tag 6
inflight: CMD
[ 572.057240] sd 8:0:0:0: [sdb] tag#26 CDB: Write(10) 2a 00 38 eb cc d8
00 00 08 00
[ 572.057244] sd 8:0:0:0: [sdb] tag#25 uas_eh_abort_handler 0 uas-tag 5
inflight: CMD
Fixed this issue by update software record temp variable when handles
128 TRB events.
Signed-off-by: Weitao Wang <WeitaoWang-oc@xxxxxxxxxxx>
---
drivers/usb/host/xhci-ring.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index d0b6806..f970799 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3141,6 +3141,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
if (event_loop++ < TRBS_PER_SEGMENT / 2)
continue;
xhci_update_erst_dequeue(xhci, event_ring_deq);
+ event_ring_deq = xhci->event_ring->dequeue;
/* ring is half-full, force isoc trbs to interrupt more
often */
if (xhci->isoc_bei_interval > AVOID_BEI_INTERVAL_MIN)
--
2.7.4
