Linux Tip Commits - Date Index

• Thread Index

• [tip: irq/core] irqchip/gic-v3-its: Free collection mapping on device teardown
  • From: "tip-bot2 for Marc Zyngier" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] irqchip/irq-bcm7038-l1: Support brcm,int-fwd-mask
  • From: "tip-bot2 for Florian Fainelli" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] dt-bindings: Document brcm, int-fwd-mask property for bcm7038-l1-intc
  • From: "tip-bot2 for Florian Fainelli" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] irqchip/gic-v3-its: Factor out wait_for_syncr primitive
  • From: "tip-bot2 for Marc Zyngier" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] drivers: irqchip: qcom-pdc: Move to an SoC independent compatible
  • From: "tip-bot2 for Rajendra Nayak" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] irqchip/gic-v3-its: Synchronise INT/CLEAR commands targetting a VLPI using VSYNC
  • From: "tip-bot2 for Marc Zyngier" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] irqchip/irq-bcm7038-l1: Add PM support
  • From: "tip-bot2 for Justin Chen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] irqchip: Add support for Layerscape external interrupt lines
  • From: "tip-bot2 for Rasmus Villemoes" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] irqchip/gic-v3-its: Make is_v4 use a TYPER copy
  • From: "tip-bot2 for Marc Zyngier" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] dt-bindings: qcom,pdc: Add compatible for sc7180
  • From: "tip-bot2 for Rajendra Nayak" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] irqchip/irq-bcm7038-l1: Enable parent IRQ if necessary
  • From: "tip-bot2 for Florian Fainelli" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] dt-bindings: Document brcm, irq-can-wake for brcm, bcm7038-l1-intc.txt
  • From: "tip-bot2 for Florian Fainelli" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] dt/bindings: Add bindings for Layerscape external irqs
  • From: "tip-bot2 for Rasmus Villemoes" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] irqchip: Remove redundant semicolon after while
  • From: "tip-bot2 for Daode Huang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] irqchip/gic-v3: Fix __iomem warning
  • From: "tip-bot2 for Ben Dooks (Codethink)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] irqchip/gic-v3-its: Fix u64 to __le64 warnings
  • From: "tip-bot2 for Ben Dooks (Codethink)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] irqchip/gic-v3-its: Make vlpi_lock a spinlock
  • From: "tip-bot2 for Marc Zyngier" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] irqchip: ingenic: Get virq number from IRQ domain
  • From: "tip-bot2 for Paul Cercueil" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] pinctrl/sdm845: Add PDC wakeup interrupt map for GPIOs
  • From: "tip-bot2 for Lina Iyer" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Prevent exit livelock
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Mark the begin of futex exit explicitly
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Sanitize exit state handling
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Set task::futex_state to DEAD right after handling futex exit
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Provide state handling for exec() as well
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Add mutex around futex exit
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Split futex_mm_release() for exit/exec
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Replace PF_EXITPIDONE with a state
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] exit/exec: Seperate mm_release()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Move futex exit handling into futex code
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Provide distinct return value when owner is exiting
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/xen/32: Make xen_iret_crit_fixup() independent of frame layout
  • From: "tip-bot2 for Jan Beulich" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/stackframe/32: Repair 32-bit Xen PV
  • From: "tip-bot2 for Jan Beulich" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/xen/32: Simplify ring check in xen_iret_crit_fixup()
  • From: "tip-bot2 for Jan Beulich" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/kprobes] x86/alternatives: Use INT3_INSN_SIZE
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf map: Use bitmap for booleans
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf map_groups: Auto sort maps by name, if needed
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf machine: No need to check if kernel module maps pre-exist
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/kprobes] x86/kprobes: Fix ordering while text-patching
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf probe: Do not show non representive lines by perf-probe -L
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf probe: Verify given line is a representive line
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf probe: Show correct statement line number by perf probe -l
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf scripts python: exported-sql-viewer.py: Fix use of TRUE with SQLite
  • From: "tip-bot2 for Adrian Hunter" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf record: No need to process the synthesized MMAP events twice
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/kprobes] ftrace: Rework event_create_dir()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf maps: Do not use an rbtree to sort by map name
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf map: No need to adjust the long name of modules
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] x86/insn: Add some Intel instructions to the opcode map
  • From: "tip-bot2 for Adrian Hunter" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf maps: Purge the entries from maps->names in __maps__purge()
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libtraceevent: Fix parsing of event %o and %X argument types
  • From: "tip-bot2 for Konstantin Khlebnikov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] x86/insn: perf tools: Add some instructions to the new instructions test
  • From: "tip-bot2 for Adrian Hunter" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/kprobes] module: Remove set_all_modules_text_*()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf map_groups: Add a front end cache for map lookups by name
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf parse: Report initial event parsing error
  • From: "tip-bot2 for Ian Rogers" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf vendor events power8: Fix commas so PMU event files are valid JSON
  • From: "tip-bot2 for James Clark" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf probe: Support DW_AT_const_value constant value
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf probe: Trace a magic number if variable is not found
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf vendor events power9: Fix commas so PMU event files are valid JSON
  • From: "tip-bot2 for James Clark" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf probe: Generate event name with line number
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf probe: Support multiprobe event
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf vendor events arm64: Fix commas so PMU event files are valid JSON
  • From: "tip-bot2 for James Clark" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/kprobes] x86/kprobes: Convert to text-patching.h
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf map: Move seldom used ->flags field to second cacheline
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/kprobes] x86/kprobe: Add comments to arch_{,un}optimize_kprobes()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf callchain: Fix segfault in thread__resolve_callchain_sample()
  • From: "tip-bot2 for Adrian Hunter" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/kprobes] arm/ftrace: Use __patch_text()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/stackframe/32: Repair 32-bit Xen PV
  • From: "tip-bot2 for Jan Beulich" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/kprobes] x86/ftrace: Mark ftrace_modify_code_direct() __ref
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• Re: [PATCH] x86/ftrace: Mark ftrace_modify_code_direct() __ref
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH] Re: [tip: x86/cleanups] x86: Fix typos in comments
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• [tip: sched/core] sched/cpufreq: Move the cfs_rq_util_change() call to cpufreq_update_util()
  • From: "tip-bot2 for Vincent Guittot" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Fix rework of find_idlest_group()
  • From: "tip-bot2 for Vincent Guittot" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Add comments for group_type and balancing at SD_NUMA level
  • From: "tip-bot2 for Vincent Guittot" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/core: Fix the mlock accounting, again
  • From: "tip-bot2 for Alexander Shishkin" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/urgent] workqueue: Convert for_each_wq to use built-in list check
  • From: "tip-bot2 for Joel Fernandes (Google)" <tip-bot2@xxxxxxxxxxxxx>
• [PATCH] x86/ftrace: Mark ftrace_modify_code_direct() __ref
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [tip: x86/cleanups] x86: Fix typos in comments
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [tip: x86/cleanups] x86: Fix typos in comments
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• [tip: x86/cleanups] x86: Remove unused asm/rio.h
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86: Fix typos in comments
  • From: "tip-bot2 for Cao jin" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: x86/cleanups] x86/numa: Fix typo
  • From: Cao jin <caoj.fnst@xxxxxxxxxxxxxx>
• Re: [tip: x86/pti] x86/speculation: Fix redundant MDS mitigation message
  • From: Waiman Long <longman@xxxxxxxxxx>
• [tip: sched/core] sched/uclamp: Fix overzealous type replacement
  • From: "tip-bot2 for Valentin Schneider" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: locking/core] futex: Move futex exit handling into futex code
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [tip: core/kprobes] x86/ftrace: Use text_poke()
  • From: Borislav Petkov <bp@xxxxxxxxx>
• [tip: x86/pti] x86/speculation: Fix redundant MDS mitigation message
  • From: "tip-bot2 for Waiman Long" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: x86/pti] x86/speculation: Fix redundant MDS mitigation message
  • From: Borislav Petkov <bp@xxxxxxxxx>
• [tip: x86/pti] x86/speculation: Fix redundant MDS mitigation message
  • From: "tip-bot2 for Waiman Long" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/pti] x86/speculation: Fix incorrect MDS/TAA mitigation status
  • From: "tip-bot2 for Waiman Long" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/entry/32: Remove unused resume_userspace label
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/entry/64: Remove pointless jump in paranoid_exit
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/ioperm: Remove bitmap if all permissions dropped
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/ioperm: Extend IOPL config to control ioperm() as well
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/entry/32: Clarify register saving in __switch_to_asm()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/iopl: Fixup misleading comment
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/tss: Move I/O bitmap data into a seperate struct
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/ioperm: Move iobitmap data into a struct
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/iopl: Restrict iopl() permission scope
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] selftests/x86/ioperm: Extend testing so the shared bitmap is exercised
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/iopl: Remove legacy IOPL option
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/io: Speedup schedule out of I/O bitmap user
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/ioperm: Move TSS bitmap update to exit to user work
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/cpu: Unify cpu_init()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/ioperm: Simplify first ioperm() invocation logic
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/iopl: Cleanup include maze
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/tss: Fix and move VMX BUILD_BUG_ON()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/ioperm: Avoid bitmap allocation if no permissions are set
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/ptrace: Prevent truncation of bitmap size
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/process: Unify copy_thread_tls()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/ioperm: Add bitmap sequence number
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/ioperm: Share I/O bitmap if identical
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] selftests/x86/iopl: Extend test to cover IOPL emulation
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/iopl: Fixup misleading comment
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/ioperm: Remove bitmap if all permissions dropped
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/iopl: Restrict iopl() permission scope
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/ioperm: Extend IOPL config to control ioperm() as well
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/ioperm: Avoid bitmap allocation if no permissions are set
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/tss: Move I/O bitmap data into a seperate struct
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/ioperm: Share I/O bitmap if identical
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/ioperm: Move iobitmap data into a struct
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/iopl: Remove legacy IOPL option
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/ptrace: Prevent truncation of bitmap size
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/cpu: Unify cpu_init()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/iopl: Cleanup include maze
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/ioperm: Add bitmap sequence number
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/ioperm: Simplify first ioperm() invocation logic
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/tss: Fix and move VMX BUILD_BUG_ON()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/process: Unify copy_thread_tls()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/io: Speedup schedule out of I/O bitmap user
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] x86/ioperm: Move TSS bitmap update to exit to user work
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] selftests/x86/ioperm: Extend testing so the shared bitmap is exercised
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/iopl] selftests/x86/iopl: Extend test to cover IOPL emulation
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cpu] x86/cpu: Align cpu_caps_cleared and cpu_caps_set to unsigned long
  • From: "tip-bot2 for Fenghua Yu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cpu] x86/cpu: Align the x86_capability array to size of unsigned long
  • From: "tip-bot2 for Fenghua Yu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Set task::futex_state to DEAD right after handling futex exit
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Provide distinct return value when owner is exiting
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Sanitize exit state handling
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Prevent exit livelock
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Split futex_mm_release() for exit/exec
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Provide state handling for exec() as well
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Add mutex around futex exit
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] exit/exec: Seperate mm_release()
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Prevent robust futex exit race
  • From: "tip-bot2 for Yang Tao" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Mark the begin of futex exit explicitly
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Move futex exit handling into futex code
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Replace PF_EXITPIDONE with a state
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: sched/urgent] sched/topology, cpuset: Account for housekeeping CPUs to avoid empty cpumasks
  • From: Valentin Schneider <valentin.schneider@xxxxxxx>
• [tip: sched/urgent] sched/uclamp: Fix incorrect condition
  • From: "tip-bot2 for Qais Yousef" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/urgent] sched/topology, cpuset: Account for housekeeping CPUs to avoid empty cpumasks
  • From: "tip-bot2 for Valentin Schneider" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/urgent] sched/uclamp: Fix overzealous type replacement
  • From: "tip-bot2 for Valentin Schneider" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: perf/urgent] perf/aux: Fix tracking of auxiliary trace buffer allocation
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• [tip: x86/build] x86/build/vdso: Remove meaningless CFLAGS_REMOVE_*.o
  • From: "tip-bot2 for Masahiro Yamada" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: x86/cleanups] x86/numa: Fix typo
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [tip: x86/cleanups] x86/numa: Fix typo
  • From: Cao jin <caoj.fnst@xxxxxxxxxxxxxx>
• Re: [tip: x86/cleanups] x86/numa: Fix typo
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [tip: x86/cleanups] x86/numa: Fix typo
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [tip: x86/cleanups] x86/numa: Fix typo
  • From: Cao jin <caoj.fnst@xxxxxxxxxxxxxx>
• Re: [tip: x86/cleanups] x86/numa: Fix typo
  • From: Cao jin <caoj.fnst@xxxxxxxxxxxxxx>
• [tip: irq/core] irq_work: Fix IRQ_WORK_BUSY bit clearing
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] genirq: Fix function documentation of __irq_alloc_descs()
  • From: "tip-bot2 for luanshi" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/pci: Remove pci_64.h
  • From: "tip-bot2 for Christoph Hellwig" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/kprobes] x86/alternatives: Add and use text_gen_insn() helper
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/kprobes] x86/alternative: Remove text_poke_loc::len
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/kprobes] x86/mm: Remove set_kernel_text_r[ow]()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/kprobes] x86/ftrace: Use text_gen_insn()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/pci: Remove #ifdef __KERNEL__ guard from <asm/pci.h>
  • From: "tip-bot2 for Christoph Hellwig" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/kprobes] x86/alternative: Shrink text_poke_loc
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/kprobes] x86/alternatives: Update int3_emulate_push() comment
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/kprobes] x86/ftrace: Use text_poke()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86: Remove the calgary IOMMU driver
  • From: "tip-bot2 for Christoph Hellwig" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/kprobes] x86/alternative: Add text_opcode_size()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/kprobes] x86/alternatives: Teach text_poke_bp() to emulate instructions
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/kprobes] x86/alternatives, jump_label: Provide better text_poke() batching interface
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: x86/cleanups] x86/numa: Fix typo
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• [tip: x86/hyperv] x86/hyperv: Initialize clockevents earlier in CPU onlining
  • From: "tip-bot2 for Michael Kelley" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: x86/cleanups] x86/numa: Fix typo
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [tip: x86/cleanups] x86/numa: Fix typo
  • From: Cao jin <caoj.fnst@xxxxxxxxxxxxxx>
• Re: [tip: x86/cleanups] x86/numa: Fix typo
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [tip: x86/cleanups] x86/numa: Fix typo
  • From: Cao jin <caoj.fnst@xxxxxxxxxxxxxx>
• Re: [tip: x86/cleanups] x86/numa: Fix typo
  • From: Borislav Petkov <bp@xxxxxxxxx>
• [tip: perf/core] perf unwind: Use 'struct map_symbol' in 'struct unwind_entry'
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf map: Combine maps__fixup_overlappings with its only use
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf parse: Use YYABORT to clear stack after failure, plugging leaks
  • From: "tip-bot2 for Ian Rogers" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf tool: Provide an option to print perf_event_open args and return value
  • From: "tip-bot2 for Ravi Bangoria" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf callchain: Use 'struct map_symbol' in 'struct callchain_cursor_node'
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf map_groups: Pass the object to map_groups__find_ams()
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf map: Remove ->groups from 'struct map'
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf tools: Add map_groups to 'struct addr_location'
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf annotate: Stop using map->groups, use map_symbol->mg instead
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf map: Use map->dso->kernel + map__kmaps() in map__kmaps()
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf symbols: Stop using map->groups, we can use kmaps instead
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf tools: Add a 'struct map_groups' pointer to 'struct map_symbol'
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf annotate: Pass a 'map_symbol' in places receiving a pair of 'map' and 'symbol' pointers
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] pref tools: Make 'struct addr_map_symbol' contain 'struct map_symbol'
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf symbols: Use kmaps(map)->machine when we know its a kernel map
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/setup: Fix typos
  • From: "tip-bot2 for Cao jin" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/numa: Fix typo
  • From: "tip-bot2 for Cao jin" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/kdump] x86/crash: Align function arguments on opening braces
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/resctrl: Fix potential lockdep warning
  • From: "tip-bot2 for Xiaochen Shen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/core: Fix unlock balance in perf_init_event()
  • From: "tip-bot2 for Qian Cai" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] locking/lockdep: Update the comment for __lock_release()
  • From: "tip-bot2 for Dan Carpenter" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/intel/pt: Prevent redundant WRMSRs
  • From: "tip-bot2 for Alexander Shishkin" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/aux: Allow using AUX data in perf samples
  • From: "tip-bot2 for Alexander Shishkin" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/intel/pt: Factor out pt_config_start()
  • From: "tip-bot2 for Alexander Shishkin" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/intel/pt: Opportunistically use single range output mode
  • From: "tip-bot2 for Alexander Shishkin" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/intel/pt: Add sampling support
  • From: "tip-bot2 for Alexander Shishkin" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] time: Rename tsk->real_start_time to ->start_boottime
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/core: Disallow uncore-cgroup events
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/urgent] sched/pelt: Fix update of blocked PELT ordering
  • From: "tip-bot2 for Vincent Guittot" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/core: Consistently fail fork on allocation failures
  • From: "tip-bot2 for Alexander Shishkin" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/core: Fix missing static inline on perf_cgroup_switch()
  • From: "tip-bot2 for Ben Dooks (Codethink)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/aux: Fix the aux_output group inheritance fix
  • From: "tip-bot2 for Alexander Shishkin" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/aux: Disallow aux_output for kernel events
  • From: "tip-bot2 for Alexander Shishkin" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/core: Reattach a misplaced comment
  • From: "tip-bot2 for Alexander Shishkin" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/urgent] sched/core: Avoid spurious lock dependencies
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/boot] x86/boot: Introduce setup_indirect
  • From: "tip-bot2 for Daniel Kiper" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/boot] x86/boot: Introduce kernel_info
  • From: "tip-bot2 for Daniel Kiper" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/boot] x86/boot: Introduce kernel_info.setup_type_max
  • From: "tip-bot2 for Daniel Kiper" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] hrtimer: Remove the comment about not used HRTIMER_SOFTIRQ
  • From: "tip-bot2 for Sebastian Andrzej Siewior" <tip-bot2@xxxxxxxxxxxxx>
• [tip: ras/core] x86/mce/therm_throt: Optimize notifications of thermal throttle
  • From: "tip-bot2 for Srinivas Pandruvada" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/quirks: Disable HPET on Intel Coffe Lake platforms
  • From: "tip-bot2 for Kai-Heng Feng" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/boot] x86/init: Allow DT configured systems to disable RTC at boot time
  • From: "tip-bot2 for Rahul Tanwar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf probe: Filter out instances except for inlined subroutine and subprogram
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf machine: Add kernel_dso() method
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf probe: Skip end-of-sequence and non statement lines
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf probe: Skip overlapped location on searching variables
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf symbols: Remove needless checks for map->groups->machine
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf tests: Fix out of bounds memory access
  • From: "tip-bot2 for Leo Yan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf block: Cleanup and refactor block info functions
  • From: "tip-bot2 for Jin Yao" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf record: Add support for limit perf output file size
  • From: "tip-bot2 for Jiwei Sun" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf hist: Count the total cycles of all samples
  • From: "tip-bot2 for Jin Yao" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf inject: Make --strip keep evsels
  • From: "tip-bot2 for Adrian Hunter" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf report: Sort by sampled cycles percent per block for stdio
  • From: "tip-bot2 for Jin Yao" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf hist: Support block formats with compare/sort/display
  • From: "tip-bot2 for Jin Yao" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf diff: Don't use hack to skip column length calculation
  • From: "tip-bot2 for Jin Yao" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf report: Support --percent-limit for --total-cycles
  • From: "tip-bot2 for Jin Yao" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libsubcmd: Move EXTRA_FLAGS to the end to allow overriding existing flags
  • From: "tip-bot2 for James Clark" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf env: Add perf_env__numa_node()
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf probe: Fix to show ranges of variables in functions without entry_pc
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf probe: Return a better scope DIE if there is no best scope
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf map: Check if the map still has some refcounts on exit
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf maps: Add for_each_entry()/_safe() iterators
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf map_groups: Introduce for_each_entry() and for_each_entry_safe() iterators
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf probe: Fix to list probe event with correct line number
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf probe: Fix to show inlined function callsite without entry_pc
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf probe: Fix to probe an inline function which has no entry pc
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf probe: Fix wrong address verification
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf probe: Fix to show function entry line as probe-able
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf map: Allow map__next() to receive a NULL arg
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libsubcmd: Use -O0 with DEBUG=1
  • From: "tip-bot2 for James Clark" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf dso: Refactor dso_cache__read()
  • From: "tip-bot2 for Adrian Hunter" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf tools: Fix cross compile for ARM64
  • From: "tip-bot2 for John Garry" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf probe: Walk function lines in lexical blocks
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf dso: Add dso__data_write_cache_addr()
  • From: "tip-bot2 for Adrian Hunter" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf auxtrace: Add auxtrace_cache__remove()
  • From: "tip-bot2 for Adrian Hunter" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf parse: Ensure config and str in terms are unique
  • From: "tip-bot2 for Ian Rogers" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf data: Support single perf.data file directory
  • From: "tip-bot2 for Adrian Hunter" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf parse: Before yyabort-ing free components
  • From: "tip-bot2 for Ian Rogers" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf probe: Fix to probe a function which has no entry pc
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf parse: If pmu configuration fails free terms
  • From: "tip-bot2 for Ian Rogers" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf probe: Fix to find range-only function instance
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf llvm: Make .o saving a debug message, not an info one
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf parse: Add parse events handle error
  • From: "tip-bot2 for Ian Rogers" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf session: Fix indent in perf_session__new()"
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf tools: Splice events onto evlist even on error
  • From: "tip-bot2 for Ian Rogers" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf kvm: Use evlist layer api when possible
  • From: "tip-bot2 for Igor Lubashev" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf tools: Move ALLOC_LIST into a function
  • From: "tip-bot2 for Ian Rogers" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf data: Rename directory "header" file to "data"
  • From: "tip-bot2 for Adrian Hunter" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf parse: Add destructors for parse event terms
  • From: "tip-bot2 for Ian Rogers" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf record: Put a copy of kcore into the perf.data directory
  • From: "tip-bot2 for Adrian Hunter" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf tools: Avoid a malloc() for array events
  • From: "tip-bot2 for Ian Rogers" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf data: Move perf_dir_version into data.h
  • From: "tip-bot2 for Adrian Hunter" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf cs-etm: Fix definition of macro TO_CS_QUEUE_NR
  • From: "tip-bot2 for Leo Yan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf data: Correctly identify directory data files
  • From: "tip-bot2 for Adrian Hunter" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf evsel: Always preserve errno while cleaning up perf_event_open failures
  • From: "tip-bot2 for Andi Kleen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf tests: Fix a typo
  • From: "tip-bot2 for Leo Yan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf jevents: Fix resource leak in process_mapfile() and main()
  • From: "tip-bot2 for Yunfeng Ye" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf evsel: Avoid close(-1)
  • From: "tip-bot2 for Andi Kleen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf parse: Add a deep delete for parse event terms
  • From: "tip-bot2 for Ian Rogers" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf stat: Add --per-node agregation support
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf report: Sort by sampled cycles percent per block for tui
  • From: "tip-bot2 for Jin Yao" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf annotate: Fix heap overflow
  • From: "tip-bot2 for Ian Rogers" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf probe: Fix to show calling lines of inlined functions
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/hyperv] x86/hyperv: Allow guests to enable InvariantTSC
  • From: "tip-bot2 for Andrea Parri" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/hyperv] x86/hyperv: Micro-optimize send_ipi_one()
  • From: "tip-bot2 for Vitaly Kuznetsov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/rt] sched/Kconfig: Fix spelling mistake in user-visible help text
  • From: "tip-bot2 for Srivatsa S. Bhat (VMware)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] time: Fix spelling mistake in comment
  • From: "tip-bot2 for Mukesh Ojha" <tip-bot2@xxxxxxxxxxxxx>
• [tip: efi/core] MAINTAINERS: update Ard's email address to @kernel.org
  • From: "tip-bot2 for Ard Biesheuvel" <tip-bot2@xxxxxxxxxxxxx>
• [tip: efi/core] efi/random: use arch-independent efi_call_proto()
  • From: "tip-bot2 for Dominik Brodowski" <tip-bot2@xxxxxxxxxxxxx>
• [tip: efi/core] efi: libstub/tpm: enable tpm eventlog function for ARM platforms
  • From: "tip-bot2 for Xinwei Kong" <tip-bot2@xxxxxxxxxxxxx>
• [tip: efi/core] x86: efi/random: Invoke EFI_RNG_PROTOCOL to seed the UEFI RNG table
  • From: "tip-bot2 for Dominik Brodowski" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] m68k: Convert missed RODATA to RO_DATA
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] time: Optimize ns_to_timespec64()
  • From: "tip-bot2 for Arnd Bergmann" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/urgent] ntp/y2038: Remove incorrect time_t truncation
  • From: "tip-bot2 for Arnd Bergmann" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/stacktrace] stacktrace: Get rid of unneeded '!!' pattern
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/core: Make pick_next_task_idle() more consistent
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/core: Optimize pick_next_task()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Use mul_u32_u32()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/core: Further clarify sched_class::set_next_task()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/core: Simplify sched_class::pick_next_task()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Better document newidle_balance()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd: Remove set but not used variable 'active'
  • From: "tip-bot2 for Zheng Yongjun" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] irq_work: Fix irq_work_claim() memory ordering
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] irq_work: Slightly simplify IRQ_WORK_PENDING clearing
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/core] irq_work: Convert flags to atomic_t
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/amd: Remove set but not used variable 'active'
  • From: "tip-bot2 for Zheng Yongjun" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/urgent] sched/core: Fix compilation error when cgroup not selected
  • From: "tip-bot2 for Qais Yousef" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/urgent] sched: Fix pick_next_task() vs 'change' pattern race
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/mtrr] x86/mtrr: Get rid of mtrr_seq_show() forward declaration
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/mtrr] x86/mtrr: Restrict MTRR ranges dumping and ioctl()
  • From: "tip-bot2 for Zhang Xiaoxu" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: timers/core] hrtimer: Annotate lockless access to timer->state
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxx>
• Re: [tip: timers/core] hrtimer: Annotate lockless access to timer->state
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [tip: timers/core] hrtimer: Annotate lockless access to timer->state
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxx>
• Re: [tip: timers/core] hrtimer: Annotate lockless access to timer->state
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [tip: timers/core] hrtimer: Annotate lockless access to timer->state
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [tip: timers/core] hrtimer: Annotate lockless access to timer->state
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxx>
• Re: [tip: timers/core] hrtimer: Annotate lockless access to timer->state
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• [tip: x86/cpu] x86/Kconfig: Rename UMIP config parameter
  • From: "tip-bot2 for Babu Moger" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cpu] x86/umip: Make the comments vendor-agnostic
  • From: "tip-bot2 for Babu Moger" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: timers/core] hrtimer: Annotate lockless access to timer->state
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxx>
• Re: [tip: timers/core] hrtimer: Annotate lockless access to timer->state
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [tip: timers/core] hrtimer: Annotate lockless access to timer->state
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• [tip: timers/core] hrtimer: Annotate lockless access to timer->state
  • From: "tip-bot2 for Eric Dumazet" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: timers/core] hrtimer: Annotate lockless access to timer->state
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [tip: timers/core] hrtimer: Annotate lockless access to timer->state
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• [tip: timers/core] hrtimer: Annotate lockless access to timer->state
  • From: "tip-bot2 for Eric Dumazet" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf scripting engines: Iterate on tep event arrays directly
  • From: "tip-bot2 for Steven Rostedt (VMware)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf tools: Remove unused trace_find_next_event()
  • From: "tip-bot2 for Steven Rostedt (VMware)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf tools: Fix time sorting
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] h8300: Move EXCEPTION_TABLE to RO_DATA segment
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] powerpc: Remove PT_NOTE workaround
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] parisc: Move EXCEPTION_TABLE to RO_DATA segment
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] vmlinux.lds.h: Replace RODATA with RO_DATA
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] ia64: Move EXCEPTION_TABLE to RO_DATA segment
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] alpha: Move EXCEPTION_TABLE to RO_DATA segment
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] powerpc: Rename "notes" PT_NOTE to "note"
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] vmlinux.lds.h: Replace RO_DATA_SECTION with RO_DATA
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] s390: Move RO_DATA into "text" PT_LOAD Program Header
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] x86/vmlinux: Restore "text" Program Header with dummy section
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] xtensa: Move EXCEPTION_TABLE to RO_DATA segment
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] powerpc: Move EXCEPTION_TABLE to RO_DATA segment
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] arm64: Move EXCEPTION_TABLE to RO_DATA segment
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] x86/vmlinux: Use INT3 instead of NOP for linker fill bytes
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] c6x: Move EXCEPTION_TABLE to RO_DATA segment
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] x86/mm: Remove redundant address-of operators on addresses
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] vmlinux.lds.h: Allow EXCEPTION_TABLE to live in RO_DATA
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] microblaze: Move EXCEPTION_TABLE to RO_DATA segment
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] x86/mm: Report actual image regions in /proc/iomem
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] x86/vmlinux: Move EXCEPTION_TABLE to RO_DATA segment
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] vmlinux.lds.h: Replace RW_DATA_SECTION with RW_DATA
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] vmlinux.lds.h: Provide EMIT_PT_NOTE to indicate export of .notes
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] vmlinux.lds.h: Move Program Header restoration into NOTES macro
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] ia64: Rename PT_LOAD identifier "code" to "text"
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] alpha: Rename PT_LOAD identifier "kernel" to "text"
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] vmlinux.lds.h: Move NOTES into RO_DATA
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] x86/vmlinux: Actually use _etext for the end of the text segment
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] x86/mm: Report which part of kernel image is freed
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/build] powerpc: Rename PT_LOAD identifier "kernel" to "text"
  • From: "tip-bot2 for Kees Cook" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/tsc: Respect tsc command line paraemeter for clocksource_tsc_early
  • From: "tip-bot2 for Michael Zhivich" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/dumpstack/64: Don't evaluate exception stacks before setup
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/urgent] irq/irqdomain: Update __irq_domain_alloc_fwnode() function documentation
  • From: "tip-bot2 for Yi Wang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/apic/32: Avoid bogus LDR warnings
  • From: "tip-bot2 for Jan Beulich" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/urgent] timekeeping/vsyscall: Update VDSO data unconditionally
  • From: "tip-bot2 for Huacai Chen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/fpu] x86/fpu: Use XFEATURE_FP/SSE enum values instead of hardcoded numbers
  • From: "tip-bot2 for Cyrill Gorcunov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/fpu] x86/fpu: Update stale variable name in comment
  • From: "tip-bot2 for Cyrill Gorcunov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/fpu] x86/fpu: Shrink space allocated for xstate_comp_offsets
  • From: "tip-bot2 for Cyrill Gorcunov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/urgent] stacktrace: Don't skip first entry on noncurrent tasks
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/timer-of: Convert last full_name to %pOF
  • From: "tip-bot2 for Geert Uytterhoeven" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/renesas-ostm: Use unique device name instead of ostm
  • From: "tip-bot2 for Geert Uytterhoeven" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/asm9260: Add a check for of_clk_get
  • From: "tip-bot2 for Chuhong Yuan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/renesas-ostm: Convert to timer_of
  • From: "tip-bot2 for Geert Uytterhoeven" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/core] clocksource/drivers/timer-of: Use unique device name instead of timer
  • From: "tip-bot2 for Geert Uytterhoeven" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/urgent] clocksource/drivers/mediatek: Fix error handling
  • From: "tip-bot2 for Fabien Parent" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/urgent] clocksource/drivers/sh_mtu2: Do not loop using platform_get_irq_by_name()
  • From: "tip-bot2 for Geert Uytterhoeven" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/resctrl: Prevent NULL pointer dereference when reading mondata
  • From: "tip-bot2 for Xiaochen Shen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: ras/core] x86/mce: Add Xeon Icelake to list of CPUs that support PPIN
  • From: "tip-bot2 for Tony Luck" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] net/sched: Replace rcu_swap_protected() with rcu_replace_pointer()
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] x86/kvm/pmu: Replace rcu_swap_protected() with rcu_replace_pointer()
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcu: Ensure that ->rcu_urgent_qs is set before resched IPI
  • From: "tip-bot2 for Joel Fernandes (Google)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] drivers/scsi: Replace rcu_swap_protected() with rcu_replace_pointer()
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] workqueue: Convert for_each_wq to use built-in list check
  • From: "tip-bot2 for Joel Fernandes (Google)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcu: Remove unused function hlist_bl_del_init_rcu()
  • From: "tip-bot2 for Ethan Hansen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcu: Update descriptions for rcu_nocb_wake tracepoint
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcu: Several rcu_segcblist functions can be static
  • From: "tip-bot2 for kbuild test robot" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcu: Fix uninitialized variable in nocb_gp_wait()
  • From: "tip-bot2 for Dan Carpenter" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] drm/i915: Replace rcu_swap_protected() with rcu_replace_pointer()
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcu: Upgrade rcu_swap_protected() to rcu_replace_pointer()
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] security/safesetid: Replace rcu_swap_protected() with rcu_replace_pointer()
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] doc: Update list_for_each_entry_rcu() documentation
  • From: "tip-bot2 for Joel Fernandes (Google)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] docs: rcu: Correct links referring to titles
  • From: "tip-bot2 for Joel Fernandes (Google)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] net/core: Replace rcu_swap_protected() with rcu_replace_pointer()
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] docs: rcu: Increase toctree to 3
  • From: "tip-bot2 for Joel Fernandes (Google)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcu: Suppress levelspread uninitialized messages
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcu: Make kernel-mode nohz_full CPUs invoke the RCU core processing
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] Documentation: Rename rcu_node_context_switch() to rcu_note_context_switch()
  • From: "tip-bot2 for Sebastian Andrzej Siewior" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcu: Confine ->core_needs_qs accesses to the corresponding CPU
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcu: Force tick on for nohz_full CPUs not reaching quiescent states
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcu: Force nohz_full tick on upon irq enter instead of exit
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] Revert docs from "rcu: Restore barrier() to rcu_read_lock() and rcu_read_unlock()"
  • From: "tip-bot2 for Joel Fernandes (Google)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] Restore docs "treewide: Rename rcu_dereference_raw_notrace() to _check()"
  • From: "tip-bot2 for Joel Fernandes (Google)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] Revert docs from "treewide: Rename rcu_dereference_raw_notrace() to _check()"
  • From: "tip-bot2 for Joel Fernandes (Google)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] tools/memory-model/Documentation: Put redefinition of rcu-fence into explanation.txt
  • From: "tip-bot2 for Alan Stern" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcu: Reset CPU hints when reporting a quiescent state
  • From: "tip-bot2 for Joel Fernandes (Google)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] locking: locktorture: Do not include rwlock.h directly
  • From: "tip-bot2 for Wolfgang M. Reimer" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcu: Remove unused variable rcu_perf_writer_state
  • From: "tip-bot2 for Ethan Hansen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] locktorture: Replace strncmp() with str_has_prefix()
  • From: "tip-bot2 for Chuhong Yuan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcutorture: Make in-kernel-loop testing more brutal
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcutorture: Emulate dyntick aspect of userspace nohz_full sojourn
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcutorture: Remove CONFIG_HOTPLUG_CPU=n from scenarios
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] stop_machine: Provide RCU quiescent state in multi_cpu_stop()
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] nohz: Add TICK_DEP_BIT_RCU
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] tools/memory-model/Documentation: Add plain accesses and data races to explanation.txt
  • From: "tip-bot2 for Alan Stern" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcutorture: Force on tick for readers and callback flooders
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcutorture: Separate warnings for each failure type
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcu: Remove unused function rcutorture_record_progress()
  • From: "tip-bot2 for Ethan Hansen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcu: Force on tick when invoking lots of callbacks
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: efi/urgent] x86, efi: Never relocate kernel below lowest acceptable address
  • From: "tip-bot2 for Kairui Song" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] time: Export tick start/stop functions for rcutorture
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: efi/urgent] efi: libstub/arm: Account for firmware reserved memory at the base of RAM
  • From: "tip-bot2 for Ard Biesheuvel" <tip-bot2@xxxxxxxxxxxxx>
• [tip: efi/urgent] efi/random: Treat EFI_RNG_PROTOCOL output as bootloader randomness
  • From: "tip-bot2 for Dominik Brodowski" <tip-bot2@xxxxxxxxxxxxx>
• [tip: efi/urgent] efi/tpm: Return -EINVAL when determining tpm final events log size fails
  • From: "tip-bot2 for Jerry Snitselaar" <tip-bot2@xxxxxxxxxxxxx>
• [tip: efi/urgent] efi/efi_test: Lock down /dev/efi_test and require CAP_SYS_ADMIN
  • From: "tip-bot2 for Javier Martinez Canillas" <tip-bot2@xxxxxxxxxxxxx>
• [tip: efi/urgent] efi: Make CONFIG_EFI_RCI2_TABLE selectable on x86 only
  • From: "tip-bot2 for Narendra K" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcu: Make CPU-hotplug removal operations enable tick
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] tools/memory-model: Fix data race detection for unordered store and load
  • From: "tip-bot2 for Alan Stern" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] tools/memory-model/Documentation: Fix typos in explanation.txt
  • From: "tip-bot2 for Alan Stern" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] Restore docs "rcu: Restore barrier() to rcu_read_lock() and rcu_read_unlock()"
  • From: "tip-bot2 for Joel Fernandes (Google)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] bpf/cgroup: Replace rcu_swap_protected() with rcu_replace_pointer()
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] net/netfilter: Replace rcu_swap_protected() with rcu_replace_pointer()
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] fs/afs: Replace rcu_swap_protected() with rcu_replace_pointer()
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcu: Remove obsolete descriptions for rcu_barrier tracepoint
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/rcu] rcu: Update descriptions for rcu_future_grace_period tracepoint
  • From: "tip-bot2 for Paul E. McKenney" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] futex: Drop leftover wake_q_add() comment
  • From: "tip-bot2 for Davidlohr Bueso" <tip-bot2@xxxxxxxxxxxxx>
• [tip: locking/core] locking/mutex: Complain upon mutex API misuse in IRQ contexts
  • From: "tip-bot2 for Davidlohr Bueso" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] context_tracking: Check static key on context_tracking_enabled_*cpu()
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] context_tracking: Introduce context_tracking_enabled_cpu()
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/kcpustat: Introduce vtime-aware kcpustat accessor for CPUTIME_SYSTEM
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/vtime: Rename vtime_accounting_cpu_enabled() to vtime_accounting_enabled_this_cpu()
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] context_tracking: Remove context_tracking_active()
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] leds: Use vtime aware kcpustat accessor to fetch CPUTIME_SYSTEM
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair/util_est: Implement faster ramp-up EWMA on utilization increases
  • From: "tip-bot2 for Patrick Bellasi" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] procfs: Use vtime aware kcpustat accessor to fetch CPUTIME_SYSTEM
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] context_tracking: Rename context_tracking_is_cpu_enabled() to context_tracking_enabled_this_cpu()
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/vtime: Introduce vtime_accounting_enabled_cpu()
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/cputime: Add vtime idle task state
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/cputime: Add vtime guest task state
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/vtime: Record CPU under seqcount for kcpustat needs
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] context_tracking: Rename context_tracking_is_enabled() => context_tracking_enabled()
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] cpufreq: Use vtime aware kcpustat accessor to fetch CPUTIME_SYSTEM
  • From: "tip-bot2 for Frederic Weisbecker" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/urgent] sched/topology: Allow sched_asym_cpucapacity to be disabled
  • From: "tip-bot2 for Valentin Schneider" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/urgent] sched/topology: Don't try to build empty sched domains
  • From: "tip-bot2 for Valentin Schneider" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/core: Optimize perf_init_event()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/core, perf/x86: Introduce swap_task_ctx() method at 'struct pmu'
  • From: "tip-bot2 for Alexey Budankov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/core: Optimize perf_init_event() for TYPE_SOFTWARE
  • From: "tip-bot2 for Liang, Kan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86: Install platform specific ->swap_task_ctx() adapter
  • From: "tip-bot2 for Alexey Budankov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/core: Optimize perf_install_in_event()
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86: Synchronize PMU task contexts on optimized context switches
  • From: "tip-bot2 for Alexey Budankov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/x86/intel: Implement LBR callstack context synchronization
  • From: "tip-bot2 for Alexey Budankov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] ubsan, x86: Annotate and allow __ubsan_handle_shift_out_of_bounds() in uaccess regions
  • From: "tip-bot2 for Peter Zijlstra" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/core: Start rejecting the syscall with attr.__reserved_2 set
  • From: "tip-bot2 for Alexander Shishkin" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/x86/uncore: Fix event group support
  • From: "tip-bot2 for Kan Liang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/headers: Fix spelling s/EACCESS/EACCES/, s/privilidge/privilege/
  • From: "tip-bot2 for Geert Uytterhoeven" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/x86/amd/ibs: Fix reading of the IBS OpData register and thus precise RIP validity
  • From: "tip-bot2 for Kim Phillips" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/x86/amd/ibs: Handle erratum #420 only on the affected CPU family (10h)
  • From: "tip-bot2 for Kim Phillips" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cleanups] x86/apic, x86/uprobes: Correct parameter names in kernel-doc comments
  • From: "tip-bot2 for Yi Wang" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/urgent] irqchip/gic-v3-its: Use the exact ITSList for VMOVP
  • From: "tip-bot2 for Zenghui Yu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: irq/urgent] irqchip/sifive-plic: Skip contexts except supervisor in plic_init()
  • From: "tip-bot2 for Alan Mikhak" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/ftrace: Get rid of function_hook
  • From: "tip-bot2 for Borislav Petkov" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/apic] x86/ioapic: Prevent inconsistent state when moving an interrupt
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/apic] x86/ioapic: Rename misnamed functions
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/urgent] timers/sched_clock: Include local timekeeping.h for missing declarations
  • From: "tip-bot2 for Ben Dooks (Codethink)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/urgent] lib/vdso: Make clock_getres() POSIX compliant again
  • From: "tip-bot2 for Thomas Gleixner" <tip-bot2@xxxxxxxxxxxxx>
• [tip: timers/urgent] posix-cpu-timers: Fix two trivial comments
  • From: "tip-bot2 for Yi Wang" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: perf/core] perf tests: Disable bp_signal testing for arm64
  • From: Leo Yan <leo.yan@xxxxxxxxxx>
• Re: [tip: perf/core] perf tests: Disable bp_signal testing for arm64
  • From: Will Deacon <will@xxxxxxxxxx>
• [PATCH -v2] x86/ftrace: Get rid of function_hook
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH] x86/ftrace: Get rid of function_hook
  • From: Borislav Petkov <bp@xxxxxxxxx>
• [tip: perf/urgent] perf/aux: Fix AUX output stopping
  • From: "tip-bot2 for Alexander Shishkin" <tip-bot2@xxxxxxxxxxxxx>
• Re: [PATCH] x86/ftrace: Get rid of function_hook
  • From: Jiri Slaby <jslaby@xxxxxxx>
• [tip: perf/core] perf annotate: Avoid reallocation in objdump parsing
  • From: "tip-bot2 for Ian Rogers" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf script: Fix --reltime with --time
  • From: "tip-bot2 for Andi Kleen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Move mask setup to perf_evlist__mmap_ops()
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf test: Report failure for mmap events
  • From: "tip-bot2 for Leo Yan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf annotate: Use libsubcmd's run-command.h to fork objdump
  • From: "tip-bot2 for Ian Rogers" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf annotate: Don't pipe objdump output through 'expand' command
  • From: "tip-bot2 for Ian Rogers" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf annotate: Fix objdump --no-show-raw-insn flag
  • From: "tip-bot2 for Ian Rogers" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf report: Add warning when libunwind not compiled in
  • From: "tip-bot2 for Jin Yao" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf stat: Support --all-kernel/--all-user
  • From: "tip-bot2 for Jin Yao" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf vendor events arm64: Add some missing events for Hisi hip08 DDRC PMU
  • From: "tip-bot2 for John Garry" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace beauty: Add the glue for the autogenerated x86 IRQ vector array
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libbeauty: Add a generator for x86's IRQ vectors -> strings
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Hide evsel->access further, simplify code
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Introduce accessors to trace specific evsel->priv
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf list: Hide deprecated events by default
  • From: "tip-bot2 for Jin Yao" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf tests: Disable bp_signal testing for arm64
  • From: "tip-bot2 for Leo Yan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf tests: Remove needless headers for bp_account
  • From: "tip-bot2 for Leo Yan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf tools: Remove unused trace_find_next_event()
  • From: "tip-bot2 for Steven Rostedt (VMware)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf tests bp_account: Add dedicated checking helper is_supported()
  • From: "tip-bot2 for Leo Yan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Show error message when not finding a field used in a filter expression
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf scripting engines: Iterate on tep event arrays directly
  • From: "tip-bot2 for Steven Rostedt (VMware)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf string: Export asprintf__tp_filter_pids()
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Move mmap allocation to perf_evlist__mmap_ops::get
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Introduce perf_evlist__for_each_mmap()
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Add tests_mmap_thread test
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Link static tests with libapi.a
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Do not export perf_evsel__init()/perf_evlist__init()
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Pass a syscall_arg to syscall_arg_fmt->strtoul()
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Initialize evsel_trace->fmt for syscalls:sys_enter_* tracepoints
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Honour --max-events in processing syscalls:sys_enter_*
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Keep count of failed tests
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libbeauty: Introduce syscall_arg__strtoul_strarray()
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Hook the 'vec' tracepoint argument with the x86 IRQ vectors scnprintf/strtoul
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Introduce 'struct evsel__trace' for evsel->priv needs
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] tools arch x86: Grab a copy of the file containing the IRQ vector defines
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Support tracepoint dynamic char arrays
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libbeauty: Add a strarray__scnprintf_suffix() method
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Add syscall failure stats to -s/--summary and -S/--with-summary
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Filter own pid to avoid a feedback look in 'perf trace record -a'
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf jvmti: Link against tools/lib/ctype.h to have weak strlcpy()
  • From: "tip-bot2 for Thomas Richter" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf vendor events arm64: Add some missing events for Hisi hip08 HHA PMU
  • From: "tip-bot2 for John Garry" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf vendor events arm64: Fix Hisi hip08 DDRC PMU eventname
  • From: "tip-bot2 for John Garry" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf vendor events arm64: Add some missing events for Hisi hip08 L3C PMU
  • From: "tip-bot2 for John Garry" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Introduce --errno-summary
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf evlist: Fix fix for freed id arrays
  • From: "tip-bot2 for Andi Kleen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf test: Avoid infinite loop for task exit case
  • From: "tip-bot2 for Leo Yan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf tools: Allow to build with -ltcmalloc
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf annotate: Don't pipe objdump output through 'grep' command
  • From: "tip-bot2 for Ian Rogers" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libbeauty: Hook up the x86 irq_vectors table generator
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libbeauty: Introduce strarray__strtoul_flags()
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Use STUL_STRARRAY_FLAGS with mmap
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Add pr_err() macro
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Add tests_mmap_cpus test
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Use strtoul for the fcntl 'cmd' argument
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Wire up strarray__strtoul_flags()
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libbeauty: Introduce syscall_arg__strtoul_strarrays()
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libbeauty: Make the mmap_flags strarray visible outside of its beautifier
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/cpu/vmware: Fix platform detection VMWARE_PORT macro
  • From: "tip-bot2 for Thomas Hellstrom" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/cpu/vmware: Use the full form of INL in VMWARE_HYPERCALL, for clang/llvm
  • From: "tip-bot2 for Thomas Hellstrom" <tip-bot2@xxxxxxxxxxxxx>
• Re: [PATCH] x86/ftrace: Get rid of function_hook
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH] x86/ftrace: Get rid of function_hook
  • From: Borislav Petkov <bp@xxxxxxxxx>
• [tip: perf/urgent] perf/aux: Fix tracking of auxiliary trace buffer allocation
  • From: "tip-bot2 for Thomas Richter" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Use utilization to select misfit task
  • From: "tip-bot2 for Vincent Guittot" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Rename sg_lb_stats::sum_nr_running to sum_h_nr_running
  • From: "tip-bot2 for Vincent Guittot" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Rework load_balance()
  • From: "tip-bot2 for Vincent Guittot" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Remove meaningless imbalance calculation
  • From: "tip-bot2 for Vincent Guittot" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Use load instead of runnable load in load_balance()
  • From: "tip-bot2 for Vincent Guittot" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Use rq->nr_running when balancing load
  • From: "tip-bot2 for Vincent Guittot" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Optimize find_idlest_group()
  • From: "tip-bot2 for Vincent Guittot" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Rework find_idlest_group()
  • From: "tip-bot2 for Vincent Guittot" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Spread out tasks evenly when not overloaded
  • From: "tip-bot2 for Vincent Guittot" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Clean up asym packing
  • From: "tip-bot2 for Vincent Guittot" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/fair: Use load instead of runnable load in wakeup path
  • From: "tip-bot2 for Vincent Guittot" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf tools: Fix mode setting in copyfile_mode_ns()
  • From: "tip-bot2 for Adrian Hunter" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf tools: Fix resource leak of closedir() on the error paths
  • From: "tip-bot2 for Yunfeng Ye" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] tools headers UAPI: Sync sched.h with the kernel
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf c2c: Fix memory leak in build_cl_output()
  • From: "tip-bot2 for Yunfeng Ye" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf kmem: Fix memory leak in compact_gfp_flags()
  • From: "tip-bot2 for Yunfeng Ye" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] tools headers kvm: Sync kvm headers with the kernel sources
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf jvmti: Link against tools/lib/ctype.h to have weak strlcpy()
  • From: "tip-bot2 for Thomas Richter" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf evlist: Fix fix for freed id arrays
  • From: "tip-bot2 for Andi Kleen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf annotate: Fix multiple memory and file descriptor leaks
  • From: "tip-bot2 for Gustavo A. R. Silva" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] tools headers kvm: Sync kvm.h headers with the kernel sources
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] tools headers kvm: Sync kvm headers with the kernel sources
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/urgent] perf/x86/intel/pt: Fix base for single entry topa
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: x86/asm] x86/asm/ftrace: Mark function_hook as function
  • From: Borislav Petkov <bp@xxxxxxx>
• [tip: perf/core] perf/core: Fix !CONFIG_PERF_EVENTS build warnings and failures
  • From: "tip-bot2 for Ingo Molnar" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: x86/asm] x86/asm/ftrace: Mark function_hook as function
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [tip: x86/asm] x86/asm/ftrace: Mark function_hook as function
  • From: Borislav Petkov <bp@xxxxxxx>
• Re: [tip: irq/urgent] irqchip/sifive-plic: Switch to fasteoi flow
  • From: Palmer Dabbelt <palmer@xxxxxxxxxx>
• Re: [tip: x86/asm] x86/asm/ftrace: Mark function_hook as function
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [tip: x86/asm] x86/asm/ftrace: Mark function_hook as function
  • From: Borislav Petkov <bp@xxxxxxx>
• Re: [tip: x86/asm] x86/asm/ftrace: Mark function_hook as function
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [tip: x86/asm] x86/asm/ftrace: Mark function_hook as function
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [tip: x86/asm] x86/uaccess: Annotate local function
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] xen/pvh: Annotate data appropriately
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/asm/crypto: Annotate local functions
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/asm/head: Annotate data appropriately
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/boot: Annotate local functions
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/asm: Make some functions local
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/um: Annotate data appropriately
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/asm: Annotate relocate_kernel_{32,64}.c
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/asm/entry: Annotate interrupt symbols properly
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/asm/suspend: Use SYM_DATA for data
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/asm/ftrace: Mark function_hook as function
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/asm/realmode: Use SYM_DATA_* instead of GLOBAL
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/asm: Remove the last GLOBAL user and remove the macro
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/asm: Annotate aliases
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/asm/32: Change all ENTRY+ENDPROC to SYM_FUNC_*
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/asm: Replace WEAK uses by SYM_INNER_LABEL_ALIGN
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/asm/32: Change all ENTRY+END to SYM_CODE_*
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/asm: Do not annotate functions with GLOBAL
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/asm/64: Add ENDs to some functions and relabel with SYM_CODE_*
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/asm: Annotate local pseudo-functions
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] linkage: Introduce new macros for assembler symbols
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/asm/32: Add ENDs to some functions and relabel with SYM_CODE_*
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/asm/64: Change all ENTRY+END to SYM_CODE_*
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/boot: Annotate data appropriately
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/asm/purgatory: Start using annotations
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/asm/entry: Annotate THUNKs
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/asm] x86/asm: Use SYM_INNER_LABEL instead of GLOBAL
  • From: "tip-bot2 for Jiri Slaby" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf_event: Add support for LSM and SELinux checks
  • From: "tip-bot2 for Joel Fernandes (Google)" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86: xen: insn: Decode Xen and KVM emulate-prefix signature
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86: kprobes: Prohibit probing on instruction which has emulate prefix
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86/asm: Allow to pass macros to __ASM_FORM()
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/ring_buffer: Modify the parameter type of perf_mmap_free_page()
  • From: "tip-bot2 for Yunfeng Ye" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/core] x86: xen: kvm: Gather the definition of emulate prefixes
  • From: "tip-bot2 for Masami Hiramatsu" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf/ring_buffer: Matching the memory allocate and free, in rb_alloc()
  • From: "tip-bot2 for Yunfeng Ye" <tip-bot2@xxxxxxxxxxxxx>
• [tip: sched/core] sched/topology: Don't set SD_BALANCE_WAKE on cpuset domain relax
  • From: "tip-bot2 for Valentin Schneider" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/hyperv: Set pv_info.name to "Hyper-V"
  • From: "tip-bot2 for Andrea Parri" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/boot/acpi: Move get_cmdline_acpi_rsdp() under #ifdef guard
  • From: "tip-bot2 for Zhenzhong Duan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/cpu] x86/Kconfig: Enforce limit of 512 CPUs with MAXSMP and no CPUMASK_OFFSTACK
  • From: "tip-bot2 for Scott Wood" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: perf/core] perf trace: Introduce --filter for tracepoint events
  • From: Arnaldo Carvalho de Melo <acme@xxxxxxxxxx>
• [tip: x86/urgent] x86/boot/acpi: Move get_cmdline_acpi_rsdp() under #ifdef guard
  • From: "tip-bot2 for Zhenzhong Duan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: core/urgent] stop_machine: Avoid potential race behaviour
  • From: "tip-bot2 for Mark Rutland" <tip-bot2@xxxxxxxxxxxxx>
• [tip: ras/core] x86/mce: Lower throttling MCE messages' priority to warning
  • From: "tip-bot2 for Benjamin Berg" <tip-bot2@xxxxxxxxxxxxx>
• Re: [tip: perf/core] perf trace: Introduce --filter for tracepoint events
  • From: Borislav Petkov <bp@xxxxxxxxx>
• [tip: x86/urgent] x86/hyperv: Set pv_info.name to "Hyper-V"
  • From: "tip-bot2 for Andrea Parri" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/hyperv: Make vapic support x2apic mode
  • From: "tip-bot2 for Roman Kagan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/apic/x2apic: Fix a NULL pointer deref when handling a dying cpu
  • From: "tip-bot2 for Sean Christopherson" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/apic/x2apic: Fix a NULL pointer deref when handling a dying cpu
  • From: "tip-bot2 for Sean Christopherson" <tip-bot2@xxxxxxxxxxxxx>
• [tip: x86/urgent] x86/hyperv: Make vapic support x2apic mode
  • From: "tip-bot2 for Roman Kagan" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf evlist: Introduce perf_evlist__mmap_cb_mmap()
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Introduce perf_evlist__exit()
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Adopt perf_mmap__put() function from tools/perf
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Introduce perf_evlist__mmap_ops()
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Introduce perf_evlist_mmap_ops::idx callback
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Add perf_evlist_mmap_ops::get callback
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Introduce perf_evlist_mmap_ops::mmap callback
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf evlist: Introduce perf_evlist__mmap_cb_get()
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf evlist: Switch to libperf's mmap interface
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf tools: Introduce perf_evlist__mmap_cb_idx()
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Adopt perf_mmap__get() function from tools/perf
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf tools: Use perf_mmap way to detect aux mmap
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Adopt perf_mmap__consume() function from tools/perf
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Adopt perf_mmap__unmap() function from tools/perf
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Expand strings in filters to integers
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Add a strtoul() method to 'struct syscall_arg_fmt'
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Introduce a strtoul() method for 'struct strarrays'
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Add 'struct perf_mmap_param'
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Adopt perf_mmap__read_init() from tools/perf
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Add perf_mmap__init() function
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Adopt perf_mmap__read_event() from tools/perf
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Adopt perf_mmap__mmap_len() function from tools/perf
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf evlist: Introduce append_tp_filter() method
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace beauty: Add the glue for the autogenerated MSR arrays
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Associate the "msr" tracepoint arg name with x86_MSR__scnprintf()
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Adopt perf_mmap__mmap() function from tools/perf
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Enclose all events argument lists with ()
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf evlist: Factor out asprintf routine to build a tracepoint pid filter
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf beauty: Hook up the x86 MSR table generator
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf beauty: Make strarray's offset be u64
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Allow associating scnprintf routines with well known arg names
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Adopt perf_mmap__read_done() from tools/perf
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf tools: Propagate CFLAGS to libperf
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Add array of chars scnprintf beautifier
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf diff: Report noisy for cycles diff
  • From: "tip-bot2 for Jin Yao" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Introduce --filter for tracepoint events
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Move some scnprintf methods from syscall to syscall_arg_fmt
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Add the syscall_arg_fmt pointer to syscall_arg
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace beauty: Add a x86 MSR cmd id->str table generator
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf script: Allow --time with --reltime
  • From: "tip-bot2 for Andi Kleen" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Allocate an array of beautifiers for tracepoint args
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] libperf: Move the pollfd allocation from tools/perf to libperf
  • From: "tip-bot2 for Jiri Olsa" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf scripts python: exported-sql-viewer.py: Add ability for Call tree to open at a specified task and time
  • From: "tip-bot2 for Adrian Hunter" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Postpone parsing .perfconfig trace.add_events to after --verbose is processed
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf trace: Generalize the syscall_fmt find routines
  • From: "tip-bot2 for Arnaldo Carvalho de Melo" <tip-bot2@xxxxxxxxxxxxx>
• [tip: perf/core] perf scripts python: exported-sql-viewer.py: Add HBoxLayout and VBoxLayout
  • From: "tip-bot2 for Adrian Hunter" <tip-bot2@xxxxxxxxxxxxx>