The following commit has been merged into the irq/core branch of tip:
Commit-ID: 87cd38dfd9e67ffa7c3d3d1a54a2482ed23f1307
Gitweb: https://git.kernel.org/tip/87cd38dfd9e67ffa7c3d3d1a54a2482ed23f1307
Author: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
AuthorDate: Thu, 07 Nov 2019 13:21:14 +01:00
Committer: Marc Zyngier <maz@xxxxxxxxxx>
CommitterDate: Sun, 10 Nov 2019 18:47:48
dt/bindings: Add bindings for Layerscape external irqs
This adds Device Tree binding documentation for the external interrupt
lines with configurable polarity present on some Layerscape SOCs.
Signed-off-by: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Marc Zyngier <maz@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20191107122115.6244-2-linux@xxxxxxxxxxxxxxxxxx
---
Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 49 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
new file mode 100644
index 0000000..f0ad780
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
@@ -0,0 +1,49 @@
+* Freescale Layerscape external IRQs
+
+Some Layerscape SOCs (LS1021A, LS1043A, LS1046A) support inverting
+the polarity of certain external interrupt lines.
+
+The device node must be a child of the node representing the
+Supplemental Configuration Unit (SCFG).
+
+Required properties:
+- compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq".
+- #interrupt-cells: Must be 2. The first element is the index of the
+ external interrupt line. The second element is the trigger type.
+- #address-cells: Must be 0.
+- interrupt-controller: Identifies the node as an interrupt controller
+- reg: Specifies the Interrupt Polarity Control Register (INTPCR) in
+ the SCFG.
+- interrupt-map: Specifies the mapping from external interrupts to GIC
+ interrupts.
+- interrupt-map-mask: Must be <0xffffffff 0>.
+
+Example:
+ scfg: scfg@1570000 {
+ compatible = "fsl,ls1021a-scfg", "syscon";
+ reg = <0x0 0x1570000 0x0 0x10000>;
+ big-endian;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1570000 0x10000>;
+
+ extirq: interrupt-controller@1ac {
+ compatible = "fsl,ls1021a-extirq";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1ac 4>;
+ interrupt-map =
+ <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xffffffff 0x0>;
+ };
+ };
+
+
+ interrupts-extended = <&gic GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
|