Linux SCSI

Thread Index

[Prev Page][Next Page]

Re: [PATCH][SCS] sd: Read Capacity if (16) fails
- From: Hugh Dickins <hugh@xxxxxxxxxxx>
Re: [PATCH][SCS] sd: Read Capacity if (16) fails
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: [PATCH][SCS] sd: Read Capacity if (16) fails
- From: Matthew Wilcox <matthew@xxxxxx>
[PATCH][SCS] sd: Read Capacity if (16) fails
- From: Hugh Dickins <hugh@xxxxxxxxxxx>
new T13 proposal for a write barrier command
- From: Ric Wheeler <rwheeler@xxxxxxxxxx>
Re: [PATCH 6/6] cciss: fix bug if scsi tape support is disabled
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
Re: [PATCH 6/6] cciss: fix bug if scsi tape support is disabled
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
Re: [patch resend] firewire: ieee1394: Move away from SG_ALL
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: With kernel 2.6.19 no sg devices for devices that return PQ=1, PDT=0x1f
- From: Douglas Gilbert <dougg@xxxxxxxxxx>
Re: With kernel 2.6.19 no sg devices for devices that return PQ=1, PDT=0x1f
- From: Swen Schillig <swen@xxxxxxxxxxxx>
Re: [PATCH 6/6] cciss: fix bug if scsi tape support is disabled
- From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
Re: [2.6 patch] feature-removal-schedule.txt: remove the NCR53C9x entry
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Re: [2.6 patch] feature-removal-schedule.txt: remove the NCR53C9x entry
- From: Christoph Hellwig <hch@xxxxxx>
Re: [PATCH 6/6] cciss: fix bug if scsi tape support is disabled
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 1/2] pci: add misrouted interrupt error handling
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 1/2] pci: add misrouted interrupt error handling
- From: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
Re: [PATCH 1/2] pci: add misrouted interrupt error handling
- From: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
Re: [PATCH 1/2] pci: add misrouted interrupt error handling
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 2/2] fusion: Implement generic interrupt misroute handling
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 1/2] pci: add misrouted interrupt error handling
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
[2.6 patch] drivers/firmware/iscsi_ibft.c: make 3 functions static
- From: Adrian Bunk <bunk@xxxxxxxxxx>
[2.6 patch] feature-removal-schedule.txt: remove the NCR53C9x entry
- From: Adrian Bunk <bunk@xxxxxxxxxx>
Re: [patch resend] firewire: ieee1394: Move away from SG_ALL
- From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
Re: [usb-storage] USB storage devices and SAT
- From: matthieu castet <castet.matthieu@xxxxxxx>
Re: [PATCH 2/2] fusion: Implement generic interrupt misroute handling
- From: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
Re: [PATCH 1/2] pci: add misrouted interrupt error handling
- From: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: Matthew Wilcox <matthew@xxxxxx>
Re: tools support for non-512 byte sector sizes
- From: Matt Domsch <Matt_Domsch@xxxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: Matthew Wilcox <matthew@xxxxxx>
Re: With kernel 2.6.19 no sg devices for devices that return PQ=1, PDT=0x1f
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
[2.6 patch] remove the unused SCSI_QLOGIC_FC_FIRMWARE option
- From: Adrian Bunk <bunk@xxxxxxxxxx>
Re: [PATCH 2/2] fusion: Implement generic interrupt misroute handling
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [usb-storage] USB storage devices and SAT
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [usb-storage] USB storage devices and SAT
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [PATCH 1/2] pci: add misrouted interrupt error handling
- From: Bjorn Helgaas <bjorn.helgaas@xxxxxx>
Re: [usb-storage] USB storage devices and SAT
- From: Douglas Gilbert <dougg@xxxxxxxxxx>
Re: [patch resend] firewire: ieee1394: Move away from SG_ALL
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [usb-storage] USB storage devices and SAT
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [patch resend] firewire: ieee1394: Move away from SG_ALL
- From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
Re: [usb-storage] USB storage devices and SAT
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Re: Poisoning of Linux initiators on SCST reboot.
- From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
With kernel 2.6.19 no sg devices for devices that return PQ=1, PDT=0x1f
- From: Martin Petermann <martin@xxxxxxxxxxxxxxxxxx>
RE: [PATCH 1/4] scsi: megaraid_sas - Add the dumy readl to force PCI flush
- From: "Yang, Bo" <Bo.Yang@xxxxxxx>
Re: [patch resend] firewire: ieee1394: Move away from SG_ALL
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [usb-storage] USB storage devices and SAT
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [PATCH 1/2] pci: add misrouted interrupt error handling
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 1/4] scsi: megaraid_sas - Add the dumy readl to force PCI flush
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 1/2] pci: add misrouted interrupt error handling
- From: Bjorn Helgaas <bjorn.helgaas@xxxxxx>
Re: [PATCH 1/2] pci: add misrouted interrupt error handling
- From: Matthew Wilcox <matthew@xxxxxx>
Re: [GIT PATCH] SCSI fixes for 2.6.27-rc1
- From: Jeff Garzik <jeff@xxxxxxxxxx>
Re: [PATCH 1/2] pci: add misrouted interrupt error handling
- From: Bjorn Helgaas <bjorn.helgaas@xxxxxx>
Re: [patch resend] firewire: ieee1394: Move away from SG_ALL
- From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
Re: [patch resend] firewire: ieee1394: Move away from SG_ALL
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
[patch resend] firewire: ieee1394: Move away from SG_ALL
- From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
Re: [usb-storage] USB storage devices and SAT
- From: Matthew Dharm <mdharm-scsi@xxxxxxxxxxxxxxxxxx>
Re: USB storage devices and SAT
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Re: [usb-storage] USB storage devices and SAT
- From: Matthew Dharm <mdharm-scsi@xxxxxxxxxxxxxxxxxx>
Re: [GIT PATCH] SCSI fixes for 2.6.27-rc1
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [GIT PATCH] SCSI fixes for 2.6.27-rc1
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Re: [GIT PATCH] SCSI fixes for 2.6.27-rc1
- From: Ben Dooks <ben-linux@xxxxxxxxx>
Re: [PATCH 2/2] fusion: Implement generic interrupt misroute handling
- From: David Vrabel <david.vrabel@xxxxxxx>
Re: [PATCH 1/2] pci: add misrouted interrupt error handling
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 9/10] drivers/scsi/megaraid: Use DIV_ROUND_UP
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
RE: [PATCH 9/10] drivers/scsi/megaraid: Use DIV_ROUND_UP
- From: "Yang, Bo" <Bo.Yang@xxxxxxx>
Re: [usb-storage] USB storage devices and SAT
- From: castet.matthieu@xxxxxxx
Re: [PATCH 6/6] cciss: fix bug if scsi tape support is disabled
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
Re: [PATCH] cciss: return -EFAULT if copy_from_user() fails
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
Re: [usb-storage] USB storage devices and SAT
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [PATCH 1/2] scsi:netlink support in scsi and fc transports forhba specific messages
- From: Mike Christie <michaelc@xxxxxxxxxxx>
Re: [PATCH 1/2] pci: add misrouted interrupt error handling
- From: Grant Grundler <grundler@xxxxxxxxxxxxxxxx>
Re: [PATCH 1/2] pci: add misrouted interrupt error handling
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 1/2] pci: add misrouted interrupt error handling
- From: Matthew Wilcox <matthew@xxxxxx>
Re: [usb-storage] USB storage devices and SAT
- From: Matthew Dharm <mdharm-scsi@xxxxxxxxxxxxxxxxxx>
Re: [usb-storage] USB storage devices and SAT
- From: Matthew Dharm <mdharm-scsi@xxxxxxxxxxxxxxxxxx>
Re: USB storage devices and SAT
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
USB storage devices and SAT
- From: Douglas Gilbert <dougg@xxxxxxxxxx>
RE: [PATCH 2/2] fusion: Implement generic interrupt misroute handling
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
RE: [PATCH 2/2] fusion: Implement generic interrupt misroute handling
- From: "Moore, Eric" <Eric.Moore@xxxxxxx>
[GIT PATCH] SCSI fixes for 2.6.27-rc1
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
[PATCH 2/2] fusion: Implement generic interrupt misroute handling
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
[PATCH 1/2] pci: add misrouted interrupt error handling
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
RE: Sample implementation of a scheme to handle missing interrupts
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [usb-storage] BUG: SCSI: usb storage SDHC card doesn't work in 2.6.27-rc1
- From: Douglas Gilbert <dougg@xxxxxxxxxx>
RE: [PATCH 1/2] scsi:netlink support in scsi and fc transports forhba specific messages
- From: "David Somayajulu" <david.somayajulu@xxxxxxxxxx>
Re: [PATCH] GDT SCSI DISK ARRAY: fix split line comments for grep
- From: Grant Coady <grant_lkml@xxxxxxxxxxx>
Re: [PATCH] GDT SCSI DISK ARRAY: fix split line comments for grep
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
[PATCH] GDT SCSI DISK ARRAY: fix split line comments for grep
- From: Grant Coady <grant_lkml@xxxxxxxxxxx>
RE: [PATCH 1/2] scsi:netlink support in scsi and fc transports forhba specific messages
- From: James.Smart@xxxxxxxxxx
[PATCH] SCSI: select CRC_T10DIF only when necessary
- From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
[PATCH v2] cmdfilter: clean up sysfs interface
- From: "Adel Gadllah" <adel.gadllah@xxxxxxxxx>
[PATCH 9/10] drivers/scsi/megaraid: Use DIV_ROUND_UP
- From: Julia Lawall <julia@xxxxxxx>
[PATCH 8/10] drivers/scsi: Use DIV_ROUND_UP
- From: Julia Lawall <julia@xxxxxxx>
[PATCH] cmdfilter: clean up sysfs interface
- From: "Adel Gadllah" <adel.gadllah@xxxxxxxxx>
Re: [usb-storage] BUG: SCSI: usb storage SDHC card doesn't work in 2.6.27-rc1
- From: Matthew Frost <artusemrys@xxxxxxxxx>
[PATCH 4/4] scsi: megaraid_sas - Version and Documentation Update
- From: "Yang, Bo" <Bo.Yang@xxxxxxx>
[PATCH 3/4] scsi: megaraid_sas - Add the new controllers support
- From: "Yang, Bo" <Bo.Yang@xxxxxxx>
Re: Poisoning of Linux initiators on SCST reboot.
- From: greg@xxxxxxxxxxxx
Re: [usb-storage] BUG: SCSI: usb storage SDHC card doesn't work in 2.6.27-rc1
- From: Matthew Frost <artusemrys@xxxxxxxxxxxxx>
Re: [PATCH 1/2] scsi:netlink support in scsi and fc transports for hbaspecific messages
- From: David Somayajulu <david.somayajulu@xxxxxxxxxx>
[PATCH 2/4] scsi: megaraid_sas - Add the shutdown DCMD cmd to driver shutdown routine
- From: "Yang, Bo" <Bo.Yang@xxxxxxx>
[PATCH 1/4] scsi: megaraid_sas - Add the dumy readl to force PCI flush
- From: "Yang, Bo" <Bo.Yang@xxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: Matthew Wilcox <matthew@xxxxxx>
RE: SCSI device rescan, detection of disconnected device,or switched devices.
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [RFC][PATCH 1/1] cxgb3i: cxgb3 iSCSI initiator
- From: Divy Le Ray <divy@xxxxxxxxxxx>
RE: [PATCH 1/2] scsi:netlink support in scsi and fc transports for hbaspecific messages
- From: James.Smart@xxxxxxxxxx
[Bug 11194] megaraid_mbox kernel panic during st driver initialization
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
Re: [DO NOT APPLY] sd take advantage of rotation speed
- From: "Grant Grundler" <grundler@xxxxxxxxxx>
Re: [PATCH 1/2] scsi:netlink support in scsi and fc transports for hba specific messages
- From: David Somayajulu <david.somayajulu@xxxxxxxxxx>
Re: [DO NOT APPLY] sd take advantage of rotation speed
- From: Ric Wheeler <rwheeler@xxxxxxxxxx>
Re: [DO NOT APPLY] sd take advantage of rotation speed
- From: Andrew Patterson <andrew.patterson@xxxxxx>
Re: [DO NOT APPLY] sd take advantage of rotation speed
- From: "Grant Grundler" <grundler@xxxxxxxxxx>
Re: [Bugme-new] [Bug 11194] New: megraid_mbox kernel panic during st driver initialization
- From: Daniel Dickinson <cshore@xxxxxxxxxxx>
Re: [Bugme-new] [Bug 11194] New: megraid_mbox kernel panic during st driver initialization
- From: Daniel Dickinson <cshore@xxxxxxxxxxx>
Re: [stable] [PATCH][SCSI] hptiop: add more PCI device IDs
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 1/2] scsi:netlink support in scsi and fc transports for hba specific messages
- From: Mike Christie <michaelc@xxxxxxxxxxx>
Re: [stable] [PATCH][SCSI] hptiop: add more PCI device IDs
- From: Greg KH <greg@xxxxxxxxx>
Re: [PATCH 1/2] scsi:netlink support in scsi and fc transports for hbaspecific messages
- From: David Somayajulu <david.somayajulu@xxxxxxxxxx>
Re: aacraid and S.M.A.R.T
- From: Martin Samuelsson <sam@xxxxxxx>
Re: [PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
Re: SCSI device rescan, detection of disconnected device, or switched devices.
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: aacraid and S.M.A.R.T
- From: Douglas Gilbert <dougg@xxxxxxxxxx>
RE: SCSI device rescan, detection of disconnected device,or switched devices.
- From: James.Smart@xxxxxxxxxx
[Bug 11194] megaraid_mbox kernel panic during st driver initialization
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
Re: [Bugme-new] [Bug 11194] New: megraid_mbox kernel panic during st driver initialization
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
RE: SCSI device rescan, detection of disconnected device, or switched devices.
- From: James.Smart@xxxxxxxxxx
Re: [PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: SCSI device rescan, detection of disconnected device, or switched devices.
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: SCSI device rescan, detection of disconnected device, or switched devices.
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: SCSI device rescan, detection of disconnected device, or switched devices.
- From: Gal Rosen <galr@xxxxxxxxxxxx>
Re: [PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
Re: aacraid and S.M.A.R.T
- From: Martin Samuelsson <sam@xxxxxxx>
Re: SCSI device rescan, detection of disconnected device, or switched devices.
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: aacraid and S.M.A.R.T
- From: Mark Salyzyn <Mark_Salyzyn@xxxxxxxxxxx>
Re: aacraid and S.M.A.R.T
- From: Martin Samuelsson <sam@xxxxxxx>
Re: [PATCH 0/3] cmd_filter fixes
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
Re: BUG: SCSI: usb storage SDHC card doesn't work in 2.6.27-rc1
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Re: aacraid and S.M.A.R.T
- From: Mark Salyzyn <Mark_Salyzyn@xxxxxxxxxxx>
[Bug 11194] megraid_mbox kernel panic during st driver initialization
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
[Bug 11194] megaraid_mbox kernel panic during st driver initialization
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
[Bug 11194] megaraid_mbox kernel panic during st driver initialization
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
[Bug 11194] New: megraid_mbox kernel panic during st driver initialization
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
Re: SCSI device rescan, detection of disconnected device, or switched devices.
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
RE: [PATCH] cciss: return -EFAULT if copy_from_user() fails
- From: "Miller, Mike (OS Dev)" <Mike.Miller@xxxxxx>
Re: aacraid and S.M.A.R.T
- From: Douglas Gilbert <dougg@xxxxxxxxxx>
Re: [PATCH 0/3] cmd_filter fixes
- From: Matthew Wilcox <matthew@xxxxxx>
Re: [RFC][PATCH 1/1] cxgb3i: cxgb3 iSCSI initiator
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [RFC][PATCH 1/1] cxgb3i: cxgb3 iSCSI initiator
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: SCSI device rescan, detection of disconnected device, or switched devices.
- From: Gal Rosen <galr@xxxxxxxxxxxx>
Re: [PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: SCSI device rescan, detection of disconnected device, or switched devices.
- From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
Re: aacraid and S.M.A.R.T
- From: Martin Samuelsson <sam@xxxxxxx>
Re: [Bugme-new] [Bug 11185] New: Device/host RESET in SCSI
- From: Michael Ellerman <michael@xxxxxxxxxxxxxx>
Re: [PATCH 0/3] cmd_filter fixes
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
Re: [Bugme-new] [Bug 11185] New: Device/host RESET in SCSI
- From: Matthew Wilcox <matthew@xxxxxx>
Re: [PATCH 0/3] cmd_filter fixes
- From: Matthew Wilcox <matthew@xxxxxx>
Re: SCSI device rescan, detection of disconnected device, or switched devices.
- From: Gal Rosen <galr@xxxxxxxxxxxx>
Re: [Bugme-new] [Bug 11185] New: Device/host RESET in SCSI
- From: Michael Ellerman <michael@xxxxxxxxxxxxxx>
Re: [Bugme-new] [Bug 11185] New: Device/host RESET in SCSI
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: Gal Rosen <galr@xxxxxxxxxxxx>
Re: [PATCH 1/3] move cmd_filter from gendisk to request_queue
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
Re: [PATCH 0/3] cmd_filter fixes
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
RE: [PATCH 1/2] scsi:netlink support in scsi and fc transports for hbaspecific messages
- From: James.Smart@xxxxxxxxxx
Re: aacraid and S.M.A.R.T
- From: Mark Salyzyn <Mark_Salyzyn@xxxxxxxxxxx>
RE: [RFC][PATCH 1/1] cxgb3i: cxgb3 iSCSI initiator
- From: "Karen Xie" <kxie@xxxxxxxxxxx>
aacraid and S.M.A.R.T
- From: Martin Samuelsson <sam@xxxxxxx>
Re: BUG: SCSI: usb storage SDHC card doesn't work in 2.6.27-rc1
- From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
[PATCH 2/2] qla2xxx: config support for QLA8432 using netlink messages
- From: David Somayajulu <david.somayajulu@xxxxxxxxxx>
[PATCH 1/2] scsi:netlink support in scsi and fc transports for hba specific messages
- From: David Somayajulu <david.somayajulu@xxxxxxxxxx>
[PATCH 0/2] scsi:qla2xxx:netlink support for hba specific messages
- From: David Somayajulu <david.somayajulu@xxxxxxxxxx>
Re: [RFC][PATCH 1/1] cxgb3i: cxgb3 iSCSI initiator
- From: Roland Dreier <rdreier@xxxxxxxxx>
Re: [usb-storage] BUG: SCSI: usb storage SDHC card doesn't work in 2.6.27-rc1
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
[PATCH 6/6] cciss: fix bug if scsi tape support is disabled
- From: Mike Miller <mike.miller@xxxxxx>
[PATCH 5/6] cciss: add support for multi lun tape devices
- From: Mike Miller <mike.miller@xxxxxx>
[PATCH 4/6] cciss: change the way we notify scsi midlayer of tape drives
- From: Mike Miller <mike.miller@xxxxxx>
[PATCH 3/6] cciss: fix negative logical drive count in procfs
- From: Mike Miller <mike.miller@xxxxxx>
Re: [usb-storage] BUG: SCSI: usb storage SDHC card doesn't work in 2.6.27-rc1
- From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
[PATCH 2/6] cciss: remove redundant code
- From: Mike Miller <mike.miller@xxxxxx>
[PATCH 1/6] cciss: make rebuild_lun_table behave better
- From: Mike Miller <mike.miller@xxxxxx>
Re: Problems building 2.6.26 and 2.6.27-rc1
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
Re: [usb-storage] BUG: SCSI: usb storage SDHC card doesn't work in 2.6.27-rc1
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Re: [patch 10/12] lkdtm: fix for CONFIG_SCSI=n
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
Re: [patch 10/12] lkdtm: fix for CONFIG_SCSI=n
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [patch 10/12] lkdtm: fix for CONFIG_SCSI=n
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Re: Problems building 2.6.26 and 2.6.27-rc1
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
Re: aic7xxx: aic7892(B): possible regression in 2.6.26: intermittent unexpected busfrees
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
RE: Problems building 2.6.26 and 2.6.27-rc1
- From: "Miller, Mike (OS Dev)" <Mike.Miller@xxxxxx>
Re: [patch 10/12] lkdtm: fix for CONFIG_SCSI=n
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 1/3] move cmd_filter from gendisk to request_queue
- From: Peter Jones <pjones@xxxxxxxxxx>
RE: Problems building 2.6.26 and 2.6.27-rc1
- From: "Miller, Mike (OS Dev)" <Mike.Miller@xxxxxx>
Re: [PATCH 0/3] cmd_filter fixes
- From: "Adel Gadllah" <adel.gadllah@xxxxxxxxx>
[patch 10/12] lkdtm: fix for CONFIG_SCSI=n
- From: akpm@xxxxxxxxxxxxxxxxxxxx
[patch 09/12] ipr: use memory_read_from_buffer()
- From: akpm@xxxxxxxxxxxxxxxxxxxx
[patch 11/12] scsi: gdth.c use unaligned access helpers
- From: akpm@xxxxxxxxxxxxxxxxxxxx
[patch 08/12] scsi: aic79xx aic79xx_pci.c fix shadowed variables
- From: akpm@xxxxxxxxxxxxxxxxxxxx
[patch 12/12] scsi: use the common hex_asc array rather than a private one
- From: akpm@xxxxxxxxxxxxxxxxxxxx
Re: [usb-storage] BUG: SCSI: usb storage SDHC card doesn't work in 2.6.27-rc1
- From: Douglas Gilbert <dougg@xxxxxxxxxx>
[patch 05/12] scsi: replace __inline with inline
- From: akpm@xxxxxxxxxxxxxxxxxxxx
[patch 04/12] #if 0 ses_match_host()
- From: akpm@xxxxxxxxxxxxxxxxxxxx
[patch 03/12] aic7xxx: update *_shipped files
- From: akpm@xxxxxxxxxxxxxxxxxxxx
[patch 06/12] MPT: remove unused struct -- mpt_proc_entry_t
- From: akpm@xxxxxxxxxxxxxxxxxxxx
[patch 02/12] aic7xxx: update .reg files
- From: akpm@xxxxxxxxxxxxxxxxxxxx
[patch 07/12] scsi: aic79xx_core fix shadowed variables, add statics
- From: akpm@xxxxxxxxxxxxxxxxxxxx
[patch 01/12] aic7xxx: introduce "dont_generate_debug_code" keyword in aicasm parser
- From: akpm@xxxxxxxxxxxxxxxxxxxx
Re: [RFC][PATCH 1/1] cxgb3i: cxgb3 iSCSI initiator
- From: Jeff Garzik <jgarzik@xxxxxxxxx>
RE: Problems building 2.6.26 and 2.6.27-rc1
- From: "Miller, Mike (OS Dev)" <Mike.Miller@xxxxxx>
Re: Problems building 2.6.26 and 2.6.27-rc1
- From: Roland Dreier <rdreier@xxxxxxxxx>
RE: Problems building 2.6.26 and 2.6.27-rc1
- From: "Miller, Mike (OS Dev)" <Mike.Miller@xxxxxx>
Re: Problems building 2.6.26 and 2.6.27-rc1
- From: Roland Dreier <rdreier@xxxxxxxxx>
Problems building 2.6.26 and 2.6.27-rc1
- From: Mike Miller <mike.miller@xxxxxx>
Re: tools support for non-512 byte sector sizes
- From: Theodore Tso <tytso@xxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: Ric Wheeler <rwheeler@xxxxxxxxxx>
Re: aic7xxx: aic7892(B): possible regression in 2.6.26: intermittent unexpected busfrees
- From: thomas schorpp <thomas.schorpp@xxxxxxxxxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: Theodore Tso <tytso@xxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Re: ses: fix VPD inquiry overrun
- From: Harvey Harrison <harvey.harrison@xxxxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: Matt Domsch <Matt_Domsch@xxxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: Jim Meyering <jim@xxxxxxxxxxxx>
Re: BUG: SCSI: usb storage SDHC card doesn't work in 2.6.27-rc1
- From: Matthew Frost <artusemrys@xxxxxxxxx>
Re: [PATCH] Fix miscalculation of sg_io timeout in CDROM_SEND_PACKET handler.
- From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
Re: [PATCH] Fix miscalculation of sg_io timeout in CDROM_SEND_PACKET handler.
- From: Tim Wright <timw@xxxxxxxxx>
Re: [usb-storage] BUG: SCSI: usb storage SDHC card doesn't work in 2.6.27-rc1
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Re: [PATCH] Fix miscalculation of sg_io timeout in CDROM_SEND_PACKET handler.
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [usb-storage] BUG: SCSI: usb storage SDHC card doesn't work in 2.6.27-rc1
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: ses: fix VPD inquiry overrun
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [usb-storage] BUG: SCSI: usb storage SDHC card doesn't work in 2.6.27-rc1
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Re: BUG: SCSI: usb storage SDHC card doesn't work in 2.6.27-rc1
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: Matt Domsch <Matt_Domsch@xxxxxxxx>
Re: [regression] CD-DA delay needed after insertion (http://bugzilla.kernel.org/show_bug.cgi?id=10974)
- From: Geert Uytterhoeven <Geert.Uytterhoeven@xxxxxxxxxxx>
Re: [PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
Re: ses: fix VPD inquiry overrun
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: Gal Rosen <galr@xxxxxxxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [usb-storage] BUG: SCSI: usb storage SDHC card doesn't work in 2.6.27-rc1
- From: Matthew Dharm <mdharm-kernel@xxxxxxxxxxxxxxxxxx>
Re: BUG: SCSI: usb storage SDHC card doesn't work in 2.6.27-rc1
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
RE: Sample implementation of a scheme to handle missing interrupts
- From: "Moore, Eric" <Eric.Moore@xxxxxxx>
Re: [dm-devel] Re: Patch to lsi rda device handler
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: Jeff Garzik <jeff@xxxxxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Re: [RFC] [PATCH 1/7] pcmcia: add pcmcia_loop_config() helper
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: Douglas Gilbert <dougg@xxxxxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: Matthew Wilcox <matthew@xxxxxx>
Re: tools support for non-512 byte sector sizes
- From: Ric Wheeler <rwheeler@xxxxxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: Matthew Wilcox <matthew@xxxxxx>
Re: tools support for non-512 byte sector sizes
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
RE: tools support for non-512 byte sector sizes
- From: "Moore, Eric" <Eric.Moore@xxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: Matthew Wilcox <matthew@xxxxxx>
Re: tools support for non-512 byte sector sizes
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: tools support for non-512 byte sector sizes
- From: Matthew Wilcox <matthew@xxxxxx>
Re: Poisoning of Linux initiators on SCST reboot.
- From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
Re: Subtle but oops causing problem with class_device->device conversion
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: Subtle but oops causing problem with class_device->device conversion
- From: Kay Sievers <kay.sievers@xxxxxxxx>
[PATCH] scsi_transport_spi: fix oops in revalidate
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Subtle but oops causing problem with class_device->device conversion
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
tools support for non-512 byte sector sizes
- From: Ric Wheeler <rwheeler@xxxxxxxxxx>
ses: fix VPD inquiry overrun
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
[PATCH][RFC] qla2xxx: Proposed protection of fcports field of struct scsi_qla_host
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [PATCH][SCSI] hptiop: add more PCI device IDs
- From: HighPoint Linux Team <linux@xxxxxxxxxxxxxxxxxx>
Re: [PATCH][SCSI] hptiop: add more PCI device IDs
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: Gal Rosen <galr@xxxxxxxxxxxx>
[RFC] [PATCH 4/7] pcmcia: use pcmcia_loop_config in scsi pcmcia drivers
- From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
[RFC] [PATCH 1/7] pcmcia: add pcmcia_loop_config() helper
- From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
Re: Poisoning of Linux initiators on SCST reboot.
- From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
[GIT PATCH] first bug fixes for 2.6.27-rc1
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
RE: Sample implementation of a scheme to handle missing interrupts
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: Poisoning of Linux initiators on SCST reboot.
- From: greg@xxxxxxxxxxxx
Re: [SCSI] can't plug Nokia 5300 anymore (bisected)
- From: Cédric Godin <cedric@xxxxxxxxxx>
RE: Sample implementation of a scheme to handle missing interrupts
- From: "Moore, Eric" <Eric.Moore@xxxxxxx>
Re: [PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
Re: [PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
[PATCH] qla2xxx: Fix dpc_thread race on the module unload
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [SCSI] can't plug Nokia 5300 anymore (bisected)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
[Bug 11117] aic94xx doesn't sustain the load when more than 2 SAS drives are connected and actively used
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
Re: [Bug 11117] New: aic94xx doesn't sustain the load when more than 2 SAS drives are connected and actively used
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [DO NOT APPLY] sd take advantage of rotation speed
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: [DO NOT APPLY] sd take advantage of rotation speed
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: Build fallout from scsi merge...
- From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
Re: [DO NOT APPLY] sd take advantage of rotation speed
- From: Ric Wheeler <rwheeler@xxxxxxxxxx>
aic7xxx: aic7892(B): possible regression in 2.6.26: intermittent unexpected busfrees
- From: thomas schorpp <thomas.schorpp@xxxxxxxxxxxxxx>
Re: SCSI device rescan, detection of disconnected device, or switched devices.
- From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
SCSI device rescan, detection of disconnected device, or switched devices.
- From: Gal Rosen <galr@xxxxxxxxxxxx>
Re: Sample implementation of a scheme to handle missing interrupts
- From: Matthew Wilcox <matthew@xxxxxx>
Re: Sample implementation of a scheme to handle missing interrupts
- From: "Zhao Forrest" <forrest.zhao@xxxxxxxxx>
Re: [SCSI] can't plug Nokia 5300 anymore (bisected)
- From: Cédric Godin <cedric@xxxxxxxxxx>
Sample implementation of a scheme to handle missing interrupts
- From: Matthew Wilcox <matthew@xxxxxx>
Re: Build fallout from scsi merge...
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
Re: [PATCH 0/3] cmd_filter fixes
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
[PATCH] Fix miscalculation of sg_io timeout in CDROM_SEND_PACKET handler.
- From: Tim Wright <timw@xxxxxxxxx>
Build fallout from scsi merge...
- From: David Miller <davem@xxxxxxxxxxxxx>
Re: [GIT PATCH] final SCSI pieces for 2.6.27
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [RFC 03/14] osd_uld: OSD scsi ULD
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 0/3] cmd_filter fixes
- From: "Adel Gadllah" <adel.gadllah@xxxxxxxxx>
Re: [PATCH 0/3] cmd_filter fixes
- From: "Adel Gadllah" <adel.gadllah@xxxxxxxxx>
Re: [GIT PATCH] final SCSI pieces for 2.6.27
- From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
[GIT PATCH] final SCSI pieces for 2.6.27
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Patch added to scsi-misc-2.6: [SCSI] replace __FUNCTION__ with __func__
- From: James Bottomley <jejb@xxxxxxxxxx>
[PATCH] scsi: Generalise last_sector_bug; fixes regression and potential future issues on USB cardreaders
- From: Alan Jenkins <alan-jenkins@xxxxxxxxxxxxxx>
Re: scsi: Generalise last_sector_bug; fixes regression and potential future issues on USB cardreaders
- From: Alan Jenkins <alan-jenkins@xxxxxxxxxxxxxx>
Re: [SCSI] can't plug Nokia 5300 anymore (bisected)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Re: scsi: Generalise last_sector_bug; fixes regression and potential future issues on USB cardreaders
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH] scsi: sd_dif.c use unaligned access helpers
- From: Harvey Harrison <harvey.harrison@xxxxxxxxx>
[PATCH] ch: fix ch_remove oops
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
Re: [PATCH] scsi: sd_dif.c use unaligned access helpers
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: [SCSI] can't plug Nokia 5300 anymore (bisected)
- From: Cédric Godin <cedric@xxxxxxxxxx>
[PATCH 0/3] cmd_filter fixes
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
[PATCH 1/3] move cmd_filter from gendisk to request_queue
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
[PATCH 2/3] sg: restore command permission for TYPE_SCANNER
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
[PATCH 3/3] rename blk_scsi_cmd_filter to blk_cmd_filter
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
Re: [PATCH] scsi: sd_dif.c use unaligned access helpers
- From: Harvey Harrison <harvey.harrison@xxxxxxxxx>
Re: [PATCH] scsi: sd_dif.c use unaligned access helpers
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: [SCSI] can't plug Nokia 5300 anymore (bisected)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
[SCSI] can't plug Nokia 5300 anymore (bisected)
- From: Cédric Godin <cedric@xxxxxxxxxx>
Re: [PATCH 2/5] drivers/scsi/aic94xx/: replace __FUNCTION__ with __func__
- From: "Darrick J. Wong" <djwong@xxxxxxxxxx>
qc_defer for sas_ata.c:sas_sata_ops?
- From: "Dailey, Nate" <Nate.Dailey@xxxxxxxxxxx>
Re: [PATCH 2/5] drivers/scsi/aic94xx/: replace __FUNCTION__ with __func__
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 2/5] drivers/scsi/aic94xx/: replace __FUNCTION__ with __func__
- From: "rae l" <crquan@xxxxxxxxx>
Re: [PATCH 2/5] drivers/scsi/aic94xx/: replace __FUNCTION__ with __func__
- From: "Darrick J. Wong" <djwong@xxxxxxxxxx>
RE: HP (Compaq) Smart Array 5xxx controller SCSI driver
- From: Andrew Patterson <andrew.patterson@xxxxxx>
Re: Poisoning of Linux initiators on SCST reboot.
- From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
Re: Poisoning of Linux initiators on SCST reboot.
- From: Stanislaw Gruszka <stf_xl@xxxxx>
Re: [Scst-devel] Poisoning of Linux initiators on SCST reboot.
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
Re: [Scst-devel] Poisoning of Linux initiators on SCST reboot.
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
[PATCH][SCSI] hptiop: add more PCI device IDs
- From: HighPoint Linux Team <linux@xxxxxxxxxxxxxxxxxx>
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments about VMERGE
- From: David Miller <davem@xxxxxxxxxxxxx>
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments about VMERGE
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
[PATCH 5/5] drivers/scsi/ core: replace __FUNCTION__ with __func__
- From: Denis ChengRq <crquan@xxxxxxxxx>
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments
- From: "John David Anglin" <dave@xxxxxxxxxxxxxxxxxx>
[PATCH 2/5] drivers/scsi/aic94xx/: replace __FUNCTION__ with __func__
- From: Denis ChengRq <crquan@xxxxxxxxx>
[PATCH 4/5] drivers/scsi/lpfc/: replace __FUNCTION__ with __func__
- From: Denis ChengRq <crquan@xxxxxxxxx>
[PATCH 3/5] drivers/scsi/libsas/: replace __FUNCTION__ with __func__
- From: Denis ChengRq <crquan@xxxxxxxxx>
[PATCH 2/5] drivers/scsi/aic94xx/: replace __FUNCTION__ with __func__
- From: Denis ChengRq <crquan@xxxxxxxxx>
[PATCH 1/5] drivers/scsi/megaraid/: replace __FUNCTION__ with __func__
- From: Denis ChengRq <crquan@xxxxxxxxx>
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments about VMERGE
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments about VMERGE
- From: David Miller <davem@xxxxxxxxxxxxx>
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments about VMERGE
- From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
Re: [PATCH 0/5] qla2xxx: more updates/fixes for 2.6.27 [8.02.01-k6].
- From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
Poisoning of Linux initiators on SCST reboot.
- From: greg@xxxxxxxxxxxx
[RFC 14/14] scsi: Add osd library to build system
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
[RFC 13/14] osd: Documentation for OSD library
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
[RFC 12/14] osd: Kconfig file for in-tree builds
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
[RFC 11/14] osd_ktests: OSDv2 auto detection
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
[RFC 10/14] libosd: OSD version 2 Support
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
[RFC 09/14] libosd: Not implemented commands
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
[RFC 08/14] libosd: Add Flush and List-objects support
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
[RFC 07/14] libosd: OSD Security processing stubs
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
[RFC 06/14] osd_ktests: Test Attribute lists
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
[RFC 05/14] libosd: attributes Support
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
[RFC 04/14] osd_ktests: Add basic OSD tests
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
[RFC 03/14] osd_uld: OSD scsi ULD
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
[RFC 02/14] libosd: OSDv1 preliminary implementation
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
[RFC 01/14] libosd: OSDv1 Headers
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [RFC 00/14] open-osd: OSD Initiator library for Linux
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments about VMERGE
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments about VMERGE
- From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
Re: [PATCH 0/5] qla2xxx: more updates/fixes for 2.6.27 [8.02.01-k6].
- From: Matthew Wilcox <matthew@xxxxxx>
Re: HP (Compaq) Smart Array 5xxx controller SCSI driver
- From: scameron@xxxxxxxxxxxxxxxxxxxxxxx
[PATCH 4/5] qla2xxx: Additional NPIV corrections.
- From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
[PATCH 1/5] qla2xxx: Issue proper ISP callbacks during stop-firmware.
- From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
[PATCH 3/5] qla2xxx: drivers/scsi/qla2xxx/qla_os.c: suppress uninitialized-var warning
- From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
[PATCH 2/5] qla2xxx: use memory_read_from_buffer()
- From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
[PATCH 5/5] qla2xxx: Update version number to 8.02.01-k6.
- From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
[PATCH 0/5] qla2xxx: more updates/fixes for 2.6.27 [8.02.01-k6].
- From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments about VMERGE
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
RE: HP (Compaq) Smart Array 5xxx controller SCSI driver
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments about VMERGE
- From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
RE: HP (Compaq) Smart Array 5xxx controller SCSI driver
- From: "Miller, Mike (OS Dev)" <Mike.Miller@xxxxxx>
Re: [PATCH 1/1] 3ware add MSI support
- From: Matthew Wilcox <matthew@xxxxxx>
Re: HP (Compaq) Smart Array 5xxx controller SCSI driver
- From: scameron@xxxxxxxxxxxxxxxxxxxxxxx
Re: HP (Compaq) Smart Array 5xxx controller SCSI driver
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
Re: HP (Compaq) Smart Array 5xxx controller SCSI driver
- From: scameron@xxxxxxxxxxxxxxxxxxxxxxx
scsi: Generalise last_sector_bug; fixes regression and potential future issues on USB cardreaders
- From: Alan Jenkins <alan-jenkins@xxxxxxxxxxxxxx>
Regression fix: Generalise last_sector_bug to avoid breaking more buggy devices
- From: Alan Jenkins <alan-jenkins@xxxxxxxxxxxxxx>
Re: [PATCH 14/16 v4] ibmvscsi: driver enablement for CMO
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
Re: [PATCH/RFC v3] allow userspace to modify scsi command filter on per device basis
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
Re: HP (Compaq) Smart Array 5xxx controller SCSI driver
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
Re: HP (Compaq) Smart Array 5xxx controller SCSI driver
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
RE: [RFC PATCH] HP (Compaq) Smart Array 5xxx controller SCSI driver
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
Re: [PATCH/RFC v3] allow userspace to modify scsi command filter on per device basis
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
[PATCH] scsi: sd_dif.c use unaligned access helpers
- From: Harvey Harrison <harvey.harrison@xxxxxxxxx>
Re: persistent reservation behaviour with dm-multipath
- From: Christophe Varoqui <christophe.varoqui@xxxxxxx>
Re: persistent reservation behaviour with dm-multipath
- From: Douglas Gilbert <dougg@xxxxxxxxxx>
Re: [Cbe-oss-dev] [regression/bisected] corrupt CD data after media change and delay
- From: "Alessandro Suardi" <alessandro.suardi@xxxxxxxxx>
[PATCH 15/16 v4] ibmvfc: Add support for collaborative memory overcommit
- From: Robert Jennings <rcj@xxxxxxxxxxxxxxxxxx>
[PATCH 14/16 v4] ibmvscsi: driver enablement for CMO
- From: Robert Jennings <rcj@xxxxxxxxxxxxxxxxxx>
RE: [RFC PATCH] HP (Compaq) Smart Array 5xxx controller SCSI driver
- From: "Miller, Mike (OS Dev)" <Mike.Miller@xxxxxx>
RE: [RFC PATCH] HP (Compaq) Smart Array 5xxx controller SCSI driver
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
Re: [RFC PATCH] HP (Compaq) Smart Array 5xxx controller SCSI driver
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
Re: [PATCH 1/1] 3ware add MSI support
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 1/1] 3ware add MSI support
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [PATCH 1/1] 3ware add MSI support
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 1/1] 3ware add MSI support
- From: Rolf Eike Beer <eike-kernel@xxxxxxxxx>
Re: [PATCH 1/1] 3ware add MSI support
- From: Matthew Wilcox <matthew@xxxxxx>
[PATCH 1/1] 3ware add MSI support
- From: "adam radford" <aradford@xxxxxxxxx>
[PATCH 1/1] 3ware add MSI support
- From: "adam radford" <aradford@xxxxxxxxx>
Re: [PATCH] ide-scsi: remove kmalloced struct request
- From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
[PATCH 1/1] scsi_lib: use blk_rq_tagged in scsi_request_fn
- From: michaelc@xxxxxxxxxxx
Re: nr_pages calculation in scsi_req_map_sg()
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [RFC PATCH] HP (Compaq) Smart Array 5xxx controller SCSI driver
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: nr_pages calculation in scsi_req_map_sg()
- From: "Jan Beulich" <jbeulich@xxxxxxxxxx>
RE: [RFC PATCH] HP (Compaq) Smart Array 5xxx controller SCSI driver
- From: "Miller, Mike (OS Dev)" <Mike.Miller@xxxxxx>
[PATCH 6/6] ibmvfc: Update driver version to 1.0.1
- From: Brian King <brking@xxxxxxxxxxxxxxxxxx>
[PATCH 3/6] ibmvfc: Fix hang on module removal
- From: Brian King <brking@xxxxxxxxxxxxxxxxxx>
[PATCH 4/6] ibmvfc: Miscellaneous fixes
- From: Brian King <brking@xxxxxxxxxxxxxxxxxx>
[PATCH 1/6] ibmvfc: Reduce unnecessary log noise
- From: Brian King <brking@xxxxxxxxxxxxxxxxxx>
[PATCH 5/6] ibmvfc: Add ADISC support
- From: Brian King <brking@xxxxxxxxxxxxxxxxxx>
[PATCH 2/6] ibmvfc: Target refcounting fixes
- From: Brian King <brking@xxxxxxxxxxxxxxxxxx>
Re: nr_pages calculation in scsi_req_map_sg()
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
nr_pages calculation in scsi_req_map_sg()
- From: "Jan Beulich" <jbeulich@xxxxxxxxxx>
Re: [RFC PATCH] HP (Compaq) Smart Array 5xxx controller SCSI driver
- From: Hannes Reinecke <hare@xxxxxxx>
[PATCH] sym53c8xx_2: free luntbl in sym_hcb_free
- From: Mike Anderson <andmike@xxxxxxxxxxxxxxxxxx>
Re: [RFC, PATCH v2] SCSI tape: MTIOCSENSE ioctl to return the sense data from errors
- From: Kai Makisara <Kai.Makisara@xxxxxxxxxxx>
Re: [RFC, PATCH v2] SCSI tape: MTIOCSENSE ioctl to return the sense data from errors
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [RFC] breakage in bsg
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: linux-next: Tree for July 16 (crash on quad core AMD)
- From: Tejun Heo <htejun@xxxxxxxxx>
Re: [Bug 11125] New: iRiver T10 is incorrectly handled because of commit bdb2b8ca
- From: Douglas Gilbert <dougg@xxxxxxxxxx>
[PATCH] scsi_eh_prep_cmnd should save scmd->underflow
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Re: linux-next: Tree for July 16 (crash on quad core AMD)
- From: Pierre Ossman <drzeus@xxxxxxxxx>
[PATCH 5/7] drivers/scsi/scsi_scan.c: Release mutex in error handling code
- From: Julia Lawall <julia@xxxxxxx>
Re: linux-next: Tree for July 16 (crash on quad core AMD)
- From: Tejun Heo <htejun@xxxxxxxxx>
Re: linux-next: Tree for July 16 (crash on quad core AMD)
- From: Pierre Ossman <drzeus@xxxxxxxxx>
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments about VMERGE
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments about VMERGE
- From: David Miller <davem@xxxxxxxxxxxxx>
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments about VMERGE
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
[Bug 11120] aacraid driver stalls on high-load SMP machines
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
[PATCH] qlogicpti: use request_firmware
- From: Jaswinder Singh <jaswinder@xxxxxxxxxxxxx>
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments about VMERGE
- From: David Miller <davem@xxxxxxxxxxxxx>
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments about VMERGE
- From: David Miller <davem@xxxxxxxxxxxxx>
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments about VMERGE
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments about VMERGE
- From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
[Bug 11125] iRiver T10 is incorrectly handled because of commit bdb2b8ca
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
[Bug 11125] New: iRiver T10 is incorrectly handled because of commit bdb2b8ca
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
Re: linux-next: Tree for July 16 (crash on quad core AMD)
- From: Tejun Heo <htejun@xxxxxxxxx>
Re: linux-next: Tree for July 16 (crash on quad core AMD)
- From: Pierre Ossman <drzeus@xxxxxxxxx>
[RFC PATCH] HP (Compaq) Smart Array 5xxx controller SCSI driver
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
persistent reservation behaviour with dm-multipath
- From: Christophe Varoqui <christophe.varoqui@xxxxxxx>
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments about VMERGE
- From: David Miller <davem@xxxxxxxxxxxxx>
Re: linux-next: Tree for July 16 (crash on quad core AMD)
- From: Tejun Heo <htejun@xxxxxxxxx>
Re: linux-next: Tree for July 16 (crash on quad core AMD)
- From: Pierre Ossman <drzeus@xxxxxxxxx>
[Bug 11120] aacraid driver stalls on high-load SMP machines
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
Re: linux-next: Tree for July 16 (crash on quad core AMD)
- From: Tejun Heo <htejun@xxxxxxxxx>
Re: linux-next: Tree for July 16 (crash on quad core AMD)
- From: Pierre Ossman <drzeus@xxxxxxxxx>
[Bug 11120] New: aacraid driver stalls on high-load SMP machines
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
[Bug 11117] New: aic94xx doesn't sustain the load when more than 2 SAS drives are connected and actively used
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
[PATCH v3] fc_transport: Add an API to allow an LLD to create vports
- From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
[PATCH] fc_transport: (update on top of) Add an API to allow an LLD to create vports
- From: James Smart <James.Smart@xxxxxxxxxx>
Re: [PATCH 1/8] scsi_dh: Implement common device table handling
- From: Hannes Reinecke <hare@xxxxxxx>
Re: linux-next: Tree for July 16 (crash on quad core AMD)
- From: Tejun Heo <htejun@xxxxxxxxx>
Re: [dm-devel] [PATCH 7/8] scsi_dh: attach to hardware handler from dm-mpath
- From: Chandra Seetharaman <sekharan@xxxxxxxxxx>
Re: [dm-devel] [PATCH 7/8] scsi_dh: attach to hardware handler from dm-mpath
- From: Alasdair G Kergon <agk@xxxxxxxxxx>
Re: [patch 9/9] drivers/scsi/qla2xxx/qla_os.c: suppress uninitialized-var warning
- From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
Re: [PATCH 4/8] scsi_dh: Update hp_sw hardware handler
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 4/8] scsi_dh: Update hp_sw hardware handler
- From: Mike Christie <michaelc@xxxxxxxxxxx>
[PATCH] fc_transport: Add an API to allow an LLD to create vports.
- From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
Re: [PATCH 3 of 6] scsi: Support devices with protection information
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: [PATCH 3 of 6] scsi: Support devices with protection information
- From: Michael Hernandez <michael.hernandez@xxxxxxxxxx>
Re: [PATCH 3 of 6] scsi: Support devices with protection information
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: [PATCH 3 of 6] scsi: Support devices with protection information
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
[ANNOUNCE] - VHACS-VM x86_64 Alpha Preview - FOLLOWUP
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
Re: [PATCH 1/8] scsi_dh: Implement common device table handling
- From: Chandra Seetharaman <sekharan@xxxxxxxxxx>
RE: bidi support: FC transport layer...
- From: James.Smart@xxxxxxxxxx
Re: [PATCH 1/8] scsi_dh: Implement common device table handling
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 0 of 7] Block/SCSI Data Integrity Support
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: bidi support: FC transport layer...
- From: Seokmann Ju <seokmann.ju@xxxxxxxxxx>
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments about VMERGE
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 0 of 7] Block/SCSI Data Integrity Support
- From: "Mike Snitzer" <snitzer@xxxxxxxxx>
RE: [Open-FCoE] [PATCH 1/1] libfc: fix queue command rport checks
- From: James.Smart@xxxxxxxxxx
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments about VMERGE
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments about VMERGE
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
Re: [PATCH] block: fix q->max_segment_size checking in blk_recalc_rq_segments about VMERGE
- From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
[PATCH 6 of 6] sd: Support for SCSI disk (SBC) Data Integrity Field
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
[PATCH 5 of 6] sd: Identify DIF protection type and application tag ownership
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
[PATCH 3 of 6] scsi: Support devices with protection information
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
[PATCH 4 of 6] scsi: Do not retry a request whose data integrity check failed
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
[PATCH 2 of 6] scsi: Command protection operation
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
[PATCH 1 of 6] scsi: Host protection capabilities
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
[PATCH 0 of 6] SCSI Data Integrity Support
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
megaraid driver problem with st driver for LTO2 tape drive
- From: "Nicolas TUFFIER" <nicolas.tuffier@xxxxxxxxxxx>
[PATCH 8/8] scsi_dh: create lookup cache
- From: hare@xxxxxxx (Hannes Reinecke)
[PATCH 7/8] scsi_dh: attach to hardware handler from dm-mpath
- From: hare@xxxxxxx (Hannes Reinecke)
[PATCH 6/8] scsi_dh: add generic SPC-3 alua handler
- From: hare@xxxxxxx (Hannes Reinecke)
[PATCH 5/8] scsi_dh: Update RDAC device handler
- From: hare@xxxxxxx (Hannes Reinecke)
[PATCH 4/8] scsi_dh: Update hp_sw hardware handler
- From: hare@xxxxxxx (Hannes Reinecke)
[PATCH 3/8] scsi_dh: Update EMC handler
- From: hare@xxxxxxx (Hannes Reinecke)

[Index of Archives] [Kernel Announce] [IETF Annouce] [Security] [Netfilter] [Linux ATA RAID] [Bugtraq]