Hi. It's me again. May I bother you with another bug? (^_^;) The machine is a Lenovo X61 Tablet, a tablet PC with Intel GM965 / ICH8-M. It has a cardbus slot (32bit PCI), Ricoh RL5C476 II (VEN_1180 DEV_0476). The card is a VIA VT6421 (VEN_1106 DEV_3249) SATA/PATA controller. The card has 2 SATA ports and no PATA. ---- CARD INSERTED ---- [ 68.118063] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 [ 68.121922] pci 0000:06:00.0: [1106:3249] type 00 class 0x010400 [ 68.121972] pci 0000:06:00.0: reg 0x10: [io 0x0af0-0x0aff] [ 68.121996] pci 0000:06:00.0: reg 0x14: [io 0x0a70-0x0a7f] [ 68.122018] pci 0000:06:00.0: reg 0x18: [io 0x01f0-0x01ff] [ 68.122039] pci 0000:06:00.0: reg 0x1c: [io 0x0170-0x017f] [ 68.122059] pci 0000:06:00.0: reg 0x20: [io 0xcc00-0xcc1f] [ 68.122080] pci 0000:06:00.0: reg 0x24: [io 0x8c00-0x8cff] [ 68.122419] pci 0000:06:00.0: BAR 5: assigned [io 0x4000-0x40ff] [ 68.122438] pci 0000:06:00.0: BAR 4: assigned [io 0x4400-0x441f] [ 68.122451] pci 0000:06:00.0: BAR 0: assigned [io 0x4420-0x442f] [ 68.122465] pci 0000:06:00.0: BAR 1: assigned [io 0x4430-0x443f] [ 68.122478] pci 0000:06:00.0: BAR 2: assigned [io 0x4440-0x444f] [ 68.122491] pci 0000:06:00.0: BAR 3: assigned [io 0x4450-0x445f] [ 68.122639] sata_via 0000:06:00.0: version 2.6 [ 68.122662] sata_via 0000:06:00.0: enabling device (0000 -> 0001) [ 68.122879] sata_via 0000:06:00.0: routed to hard irq line 0 [ 68.122903] [79] sata_via:svia_configure:635: sata_via 0000:06:00.0: enabling SATA hotplug (0x0) [ 68.124012] scsi host6: sata_via [ 68.126042] scsi host7: sata_via [ 68.128757] scsi host8: sata_via [ 68.128927] ata6: SATA max UDMA/133 port i16@0x4420 bmdma 0x4400 irq 16 [ 68.128938] ata7: SATA max UDMA/133 port i16@0x4430 bmdma 0x4408 irq 16 [ 68.128944] ata8: PATA max UDMA/133 port i16@0x4440 bmdma 0x4410 irq 16 [ 68.129071] hardreset, Online=>Offline [ 68.130162] resume, do loop [ 68.348135] resume, after do loop [ 68.353240] debounce, SCR=0x0 [ 68.358342] debounce, SCR=0x0 ... [ 68.455069] debounce, SCR=0x0 [ 68.460159] debounce, SCR=0x0 [ 68.460166] resume, return at end of function [ 68.460171] hardreset, ata_phys_link_offline check failed [ 68.470148] [2358] libata:ata_wait_idle:2049: ata6: abnormal Status 0x7F [ 68.472385] ata6: SATA link down (SStatus 0 SControl 310) [ 68.482547] hardreset, Online=>Offline [ 68.483633] resume, do loop [ 68.698036] resume, after do loop [ 68.703129] debounce, SCR=0x0 [ 68.708218] debounce, SCR=0x0 ... [ 68.804763] debounce, SCR=0x0 [ 68.809851] debounce, SCR=0x0 [ 68.809858] resume, return at end of function [ 68.809863] hardreset, ata_phys_link_offline check failed [ 68.819838] [2360] libata:ata_wait_idle:2049: ata7: abnormal Status 0x7F [ 68.822067] ata7: SATA link down (SStatus 0 SControl 310) [ 69.008039] [2363] libata:ata_wait_idle:2049: ata8: abnormal Status 0x8 ---- EXTERNAL HDD CONNECTED ---- [ 118.683511] irq 16: nobody cared (try booting with the "irqpoll" option) [ 118.684531] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rc8-M95D+ #1 [ 118.684538] Hardware name: LENOVO 776702U/776702U, BIOS 7SET39WW (1.25 ) 03/22/2011 [ 118.684542] Call Trace: [ 118.684547] <IRQ> [ 118.684550] dump_stack_lvl+0x34/0x44 [ 118.684561] __report_bad_irq+0x30/0xa2 [ 118.684569] note_interrupt.cold+0xb/0x61 [ 118.684575] handle_irq_event+0x65/0x70 [ 118.684581] handle_fasteoi_irq+0x8b/0x1c0 [ 118.684588] __common_interrupt+0x5a/0xf0 [ 118.684596] common_interrupt+0x9f/0xc0 [ 118.684601] </IRQ> [ 118.684604] <TASK> [ 118.684606] asm_common_interrupt+0x22/0x40 [ 118.684614] RIP: 0010:cpuidle_enter_state+0xbb/0x280 [ 118.684625] Code: e8 ea 91 3d ff 31 ff 49 89 c5 e8 90 09 3d ff 45 84 f6 74 12 9c 58 f6 c4 02 0f 85 b7 01 00 00 31 ff e8 a9 fc 40 ff fb 45 85 ff <0f> 88 b6 00 00 00 49 63 d7 4c 2b 2c 24 48 8d 04 52 48 8d 04 82 49 [ 118.684630] RSP: 0018:ffffffff82e03e50 EFLAGS: 00000202 [ 118.684636] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 118.684640] RDX: 0000000000000002 RSI: 000000000000db43 RDI: 00000000ffffffff [ 118.684644] RBP: ffff88810032bc00 R08: 0000000000000000 R09: 0000000000000008 [ 118.684647] R10: 0000000000000002 R11: 0000000000000002 R12: ffffffff82eba020 [ 118.684651] R13: 0000001ba2166ad8 R14: 0000000000000001 R15: 0000000000000002 [ 118.684656] cpuidle_enter+0x24/0x40 [ 118.684664] do_idle+0x1ac/0x230 [ 118.684669] cpu_startup_entry+0x14/0x20 [ 118.684674] rest_init+0xb6/0xc0 [ 118.684680] arch_call_rest_init+0x5/0x33 [ 118.684689] start_kernel+0x6c6/0x6f6 [ 118.684695] secondary_startup_64_no_verify+0xce/0xdb [ 118.684701] </TASK> [ 118.684704] handlers: [ 118.685717] [<0000000065d27af3>] i965_irq_handler [ 118.686730] [<00000000377926d6>] yenta_interrupt [ 118.687754] [<000000005c02c4d7>] usb_hcd_irq [ 118.688785] [<00000000440e256d>] vt642x_interrupt [ 118.689790] Disabling IRQ #16 ---- EJECT CARD ---- [ 136.498083] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0 [ 136.498159] hardreset, Online=>Offline [ 136.500751] Reconfig spd [ 136.500807] hardreset, Online=>Offline [ 136.500815] Reconfig spd [ 136.501858] resume, do loop [ 136.501968] resume, do loop [ 136.718048] resume, do loop [ 136.718089] resume, do loop [ 136.938104] resume, do loop [ 136.938115] resume, do loop [ 137.158076] resume, do loop [ 137.158108] resume, do loop [ 137.378105] resume, do loop [ 137.378115] resume, do loop [ 137.598082] resume, after do loop [ 137.598086] ata6: failed to resume link (SControl FFFFFFFF) [ 137.599831] hardreset, ata_phys_link_offline check failed [ 137.599872] ata6: SATA link down (SStatus FFFFFFFF SControl FFFFFFFF) [ 137.599897] resume, after do loop [ 137.599900] ata7: failed to resume link (SControl FFFFFFFF) [ 137.599965] ------------[ cut here ]------------ [ 137.601620] hardreset, ata_phys_link_offline check failed [ 137.601618] WARNING: CPU: 1 PID: 79 at drivers/ata/libata-core.c:5910 ata_host_detach+0x1c7/0x1d0 [ 137.601661] ata7: SATA link down (SStatus FFFFFFFF SControl FFFFFFFF) [ 137.603368] CPU: 1 PID: 79 Comm: pccardd Not tainted 6.1.0-rc8-M95D+ #1 [ 137.603375] Hardware name: LENOVO 776702U/776702U, BIOS 7SET39WW (1.25 ) 03/22/2011 [ 137.603378] RIP: 0010:ata_host_detach+0x1c7/0x1d0 [ 137.603385] Code: c0 74 11 48 89 f9 48 85 c9 0f 85 fd fe ff ff e9 70 ff ff ff 49 8b 8c 24 80 35 00 00 48 85 c9 0f 84 5f ff ff ff e9 e2 fe ff ff <0f> 0b e9 b7 fe ff ff 66 90 48 8b bf 40 01 00 00 e9 24 fe ff ff 0f [ 137.603391] RSP: 0018:ffff88810115fdf0 EFLAGS: 00010246 [ 137.603397] RAX: 00000000fffffffd RBX: 0000000000000000 RCX: 0000000000000000 [ 137.603401] RDX: ffff888102b07000 RSI: 0000000000000246 RDI: 00000000ffffffff [ 137.603405] RBP: ffff8881056df300 R08: 0000000000000000 R09: 0000000000000000 [ 137.603409] R10: 0000000000000002 R11: 0000000000000000 R12: ffff888105e00000 [ 137.603412] R13: 0000000000000286 R14: 0000000000000080 R15: 0000000000000000 [ 137.603416] FS: 0000000000000000(0000) GS:ffff888137d00000(0000) knlGS:0000000000000000 [ 137.603421] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 137.603425] CR2: 00007ffcdef7bd50 CR3: 0000000002e0a000 CR4: 00000000000006e0 [ 137.603429] Call Trace: [ 137.603437] <TASK> [ 137.603440] pci_device_remove+0x2c/0x90 [ 137.603451] device_release_driver_internal+0x1a1/0x220 [ 137.603458] pci_stop_bus_device+0x63/0x80 [ 137.603467] pci_stop_and_remove_bus_device+0x9/0x20 [ 137.603475] cb_free+0x31/0x50 [ 137.603481] socket_shutdown+0xab/0x100 [ 137.603486] pccardd.cold+0x8/0x67 [ 137.603493] ? pcmcia_socket_dev_complete+0x70/0x70 [ 137.603498] kthread+0xe0/0x110 [ 137.603506] ? kthread_exit+0x30/0x30 [ 137.603513] ret_from_fork+0x1f/0x30 [ 137.603520] </TASK> [ 137.603522] ---[ end trace 0000000000000000 ]--- ---- CONNECT CARD WITH HDD ALREADY ATTACHED ---- [ 168.768069] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 [ 168.771207] pci 0000:06:00.0: [1106:3249] type 00 class 0x010400 [ 168.771256] pci 0000:06:00.0: reg 0x10: [io 0x0af0-0x0aff] [ 168.771280] pci 0000:06:00.0: reg 0x14: [io 0x0a70-0x0a7f] [ 168.771302] pci 0000:06:00.0: reg 0x18: [io 0x01f0-0x01ff] [ 168.771322] pci 0000:06:00.0: reg 0x1c: [io 0x0170-0x017f] [ 168.771343] pci 0000:06:00.0: reg 0x20: [io 0xcc00-0xcc1f] [ 168.771363] pci 0000:06:00.0: reg 0x24: [io 0x8c00-0x8cff] [ 168.771695] pci 0000:06:00.0: BAR 5: assigned [io 0x4000-0x40ff] [ 168.771713] pci 0000:06:00.0: BAR 4: assigned [io 0x4400-0x441f] [ 168.771727] pci 0000:06:00.0: BAR 0: assigned [io 0x4420-0x442f] [ 168.771742] pci 0000:06:00.0: BAR 1: assigned [io 0x4430-0x443f] [ 168.771756] pci 0000:06:00.0: BAR 2: assigned [io 0x4440-0x444f] [ 168.771769] pci 0000:06:00.0: BAR 3: assigned [io 0x4450-0x445f] [ 168.771908] sata_via 0000:06:00.0: enabling device (0000 -> 0001) [ 168.772137] sata_via 0000:06:00.0: routed to hard irq line 0 [ 168.772162] [79] sata_via:svia_configure:635: sata_via 0000:06:00.0: enabling SATA hotplug (0x0) [ 168.773265] scsi host6: sata_via [ 168.775256] scsi host7: sata_via [ 168.788766] scsi host8: sata_via [ 168.788866] ata9: SATA max UDMA/133 port i16@0x4420 bmdma 0x4400 irq 16 [ 168.788872] ata10: SATA max UDMA/133 port i16@0x4430 bmdma 0x4408 irq 16 [ 168.788875] ata11: PATA max UDMA/133 port i16@0x4440 bmdma 0x4410 irq 16 [ 168.788961] hardreset, Online=>Offline [ 168.790037] resume, do loop [ 169.008036] resume, after do loop [ 169.013116] debounce, SCR=0x1 [ 169.018189] debounce, SCR=0x1 ... [ 170.054131] debounce, SCR=0x1 [ 170.059209] debounce, SCR=0x1 [ 170.062091] irq 16: nobody cared (try booting with the "irqpoll" option) [ 170.062095] CPU: 0 PID: 2356 Comm: tee Tainted: G W 6.1.0-rc8-M95D+ #1 [ 170.062100] Hardware name: LENOVO 776702U/776702U, BIOS 7SET39WW (1.25 ) 03/22/2011 [ 170.062102] Call Trace: [ 170.062107] <IRQ> [ 170.062109] dump_stack_lvl+0x34/0x44 [ 170.062117] __report_bad_irq+0x30/0xa2 [ 170.062123] note_interrupt.cold+0xb/0x61 [ 170.062128] handle_irq_event+0x65/0x70 [ 170.062133] handle_fasteoi_irq+0x8b/0x1c0 [ 170.062138] __common_interrupt+0x5a/0xf0 [ 170.062144] common_interrupt+0x9f/0xc0 [ 170.062148] </IRQ> [ 170.062150] <TASK> [ 170.062151] asm_common_interrupt+0x22/0x40 [ 170.062157] RIP: 0010:cfb_imageblit+0x3e8/0x800 [ 170.062163] Code: 0f 84 4c fe ff ff 48 8b 5c 24 40 48 01 5c 24 10 4c 8b 6c 24 10 03 6c 24 04 83 e5 1f 49 83 e5 fc e9 32 fe ff ff 44 89 44 24 18 <45> 89 f1 e9 a9 fc ff ff 48 8b 83 28 03 00 00 46 8b 2c a8 46 8b 24 [ 170.062167] RSP: 0018:ffff8881011b7918 EFLAGS: 00000246 [ 170.062171] RAX: 0000000000000000 RBX: ffff888100e2b800 RCX: 00000000000dc000 [ 170.062174] RDX: 0000000000000000 RSI: ffff8881011b7a70 RDI: 0000000000000000 [ 170.062177] RBP: 0000000000000000 R08: 0000000000000028 R09: 0000000000000001 [ 170.062179] R10: ffff888100ec0f24 R11: 0000000000000007 R12: ffff8881011b7a70 [ 170.062182] R13: ffff888100050800 R14: 0000000000000020 R15: 0000000000000000 [ 170.062186] ? asm_common_interrupt+0x22/0x40 [ 170.062191] drm_fb_helper_cfb_imageblit+0xd/0x30 [ 170.062198] bit_putcs+0x261/0x500 [ 170.062202] ? preempt_schedule_notrace+0x11/0x80 [ 170.062208] ? asm_common_interrupt+0x22/0x40 [ 170.062212] fbcon_putcs+0xff/0x140 [ 170.062218] ? bit_clear+0xe0/0xe0 [ 170.062221] fbcon_redraw.constprop.0+0xf5/0x220 [ 170.062227] fbcon_scroll+0x167/0x1b0 [ 170.062232] con_scroll+0x14d/0x200 [ 170.062236] lf+0x7f/0x90 [ 170.062239] do_con_trol+0x9b/0x1450 [ 170.062243] ? fbcon_cursor+0xef/0x160 [ 170.062248] do_con_write+0x1b3/0x9e0 [ 170.062252] ? prb_read_valid+0x12/0x20 [ 170.062258] con_write+0xb/0x20 [ 170.062261] do_output_char+0x184/0x1e0 [ 170.062266] n_tty_write+0x1c1/0x4e0 [ 170.062270] ? wait_woken+0x60/0x60 [ 170.062274] file_tty_write.constprop.0+0x15e/0x2e0 [ 170.062278] ? n_tty_check_unthrottle+0xc0/0xc0 [ 170.062282] vfs_write+0x289/0x3b0 [ 170.062289] ksys_write+0x4a/0xc0 [ 170.062294] do_syscall_64+0x35/0x80 [ 170.062297] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 170.062301] RIP: 0033:0x7f011120d1b0 [ 170.062304] Code: 40 00 48 8b 15 71 2c 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d 31 b4 0d 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89 [ 170.062307] RSP: 002b:00007ffe3ba2c688 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 170.062311] RAX: ffffffffffffffda RBX: 0000000000000441 RCX: 00007f011120d1b0 [ 170.062314] RDX: 0000000000000441 RSI: 00007ffe3ba2c7a0 RDI: 0000000000000001 [ 170.062317] RBP: 00007ffe3ba2c7a0 R08: 0000000000000004 R09: 0000000000000001 [ 170.062319] R10: 0000555b9b571aa8 R11: 0000000000000202 R12: 0000000000000441 [ 170.062321] R13: 00007f01112e1760 R14: 0000000000000441 R15: 00007f01112dca00 [ 170.062325] </TASK> [ 170.062326] handlers: [ 170.062328] [<0000000065d27af3>] i965_irq_handler [ 170.062333] [<00000000377926d6>] yenta_interrupt [ 170.062339] [<000000005c02c4d7>] usb_hcd_irq [ 170.062345] [<00000000440e256d>] vt642x_interrupt [ 170.062351] Disabling IRQ #16 [ 170.064500] debounce, SCR=0x1 [ 170.071741] debounce, SCR=0x1 ... [ 171.003692] debounce, SCR=0x1 [ 171.008787] debounce, SCR=0x1 [ 171.008797] resume, return at end of function [ 171.008803] hardreset, ata_phys_link_offline check failed [ 171.018773] [2380] libata:ata_wait_idle:2049: ata9: abnormal Status 0x80 [ 171.021255] ata9: SATA link down (SStatus 1 SControl 310) [ 171.031441] hardreset, Online=>Offline [ 171.032544] resume, do loop [ 171.258055] resume, after do loop [ 171.263153] debounce, SCR=0x0 [ 171.268253] debounce, SCR=0x0 ... [ 171.365137] debounce, SCR=0x0 [ 171.370224] debounce, SCR=0x0 [ 171.370232] resume, return at end of function [ 171.370236] hardreset, ata_phys_link_offline check failed [ 171.380213] [2382] libata:ata_wait_idle:2049: ata10: abnormal Status 0x7F [ 171.382584] ata10: SATA link down (SStatus 0 SControl 310) [ 171.578086] [2385] libata:ata_wait_idle:2049: ata11: abnormal Status 0x8 ... The same hardware setup works fine in Windows XP SP3. Thanks again for your help. Marius Dinu
