November 24, 2022 4:40 AM, "Damien Le Moal" <damien.lemoal@xxxxxxxxxxxxxxxxxx> wrote:
> So the hardware is failing to detect the device presence. No clue why.
> Only an ATA bus trace could tell us more here (do you have an ATA bus
> analyzer around ?).
No. :-)
> So options are:
> 1) Involve the router vendor and/or SoC vendor to see if they can help.
> 2) Use UDB connection between your router & drive box ? (if you can)
>
> Another thing is: Did you try earlier kernel versions ? Any earlier kernel
> working ? (I forgot if that is the case). If yes, then we should be able
> to figure out the change that broke the driver (which may be something
> changed in the SoC support rather than the mvebu driver itself).
> gi-bisect will likely not be of any help given that you are not getting a
> crash. So you will need to try out different kernel versions, starting
> with LTS kernels, and refine (use Linus tags, including RCs, to find the
> last working kernel). That may take some time, but will likely narrow down
> the search for fixing this (if that is possible given the hardware setup
> you have).
Sorry for the late reply, but I really really hate bisecting, especially manually, and especially if the test must be run on another machine.
You are correct. It initially worked, but it was broken by this commit:
commit 2dc0b46b5ea30f169b0b272253ea846a5a281731
Author: David Milburn <dmilburn@xxxxxxxxxx>
Date: Tue Nov 14 16:17:25 2017 -0600
libata: sata_down_spd_limit should return if driver has not recorded sstatus speed
During hotplug, it is possible for 6Gbps link speed to be limited all
the way down to 1.5 Gbps which may lead to a slower link speed when
drive is re-connected.
This behavior has been seen on a Intel Lewisburg SATA controller
(8086:a1d2) with HGST HUH728080ALE600 drive where SATA link speed was
limited to 1.5 Gbps and when re-connected the link came up 3.0 Gbps.
This patch was retested on above configuration and showed the
hotplugged link to come back online at max speed (6Gbps). I did not
see the downgrade when testing on Intel C600/X79, but retested patched
linux-4.14-rc5 kernel and didn't see any side effects from this
change. Also, successfully retested hotplug on port multiplier 3Gbps
link.
tj: Minor comment updates.
Signed-off-by: David Milburn <dmilburn@xxxxxxxxxx>
Signed-off-by: Tejun Heo <tj@xxxxxxxxxx>
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 2a882929de4a..8193b38a1cae 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3082,13 +3082,19 @@ int sata_down_spd_limit(struct ata_link *link, u32 spd_limit)
bit = fls(mask) - 1;
mask &= ~(1 << bit);
- /* Mask off all speeds higher than or equal to the current
- * one. Force 1.5Gbps if current SPD is not available.
+ /*
+ * Mask off all speeds higher than or equal to the current one. At
+ * this point, if current SPD is not available and we previously
+ * recorded the link speed from SStatus, the driver has already
+ * masked off the highest bit so mask should already be 1 or 0.
+ * Otherwise, we should not force 1.5Gbps on a link where we have
+ * not previously recorded speed from SStatus. Just return in this
+ * case.
*/
if (spd > 1)
mask &= (1 << (spd - 1)) - 1;
else
- mask &= 1;
+ return -EINVAL;
/* were we already at the bottom? */
if (!mask)
Just to be sure, I checked out the most recent kernel git master and reverted the bad commit. This is the resulting boot log:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 6.1.0-rc3M95D-test-00300-g245bef8f3ba1 (marius95@GRAPHIM) (arm-openwrt-linux-gcc (OpenWrt GCC 12.2.0 r21374+10-366bcffa0e) 12.2.0, GNU ld (GNU Binutils) 2.39) #40 SMP Sun Dec 4 02:40:32 EET 2022
[ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Linksys WRT1900ACv2
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000] percpu: Embedded 8 pages/cpu s9424 r0 d23344 u32768
[ 0.000000] pcpu-alloc: s9424 r0 d23344 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,115200 nfcConfig=4bitecc mtdparts=armada-nand:2048K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),34m@16m(rootfs),40m@50m(alt_kernel),34m@56m(alt_rootfs),80m@10m(ubifs),-@90m(syscfg) root=/dev/sda rootdelay=100 dyndbg="file *ata* +plmft"
[ 0.000000] Unknown kernel command line parameters "nfcConfig=4bitecc", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] Memory: 511212K/524288K available (4096K kernel code, 931K rwdata, 984K rodata, 1024K init, 306K bss, 13076K reserved, 0K cma-reserved)
...
[ 3.055271] loop: module loaded
[ 3.058618] device class 'scsi_disk': registering
[ 3.063368] bus: 'scsi': add driver sd
[ 3.067151] bus: 'pci': add driver ahci
[ 3.071207] bus: 'platform': add driver ahci
[ 3.075566] bus: 'platform': add driver ahci-mvebu
[ 3.080419] bus: 'platform': __driver_probe_device: matched device f10a8000.sata with driver ahci-mvebu
[ 3.089857] bus: 'platform': really_probe: probing driver ahci-mvebu with device f10a8000.sata
[ 3.098512] ahci-mvebu f10a8000.sata: no pinctrl handle
[ 3.103987] ahci-mvebu f10a8000.sata: Looking up ahci-supply from device tree
[ 3.111165] ahci-mvebu f10a8000.sata: Looking up ahci-supply property in node /soc/internal-regs/sata@a8000 failed
[ 3.121569] ahci-mvebu f10a8000.sata: supply ahci not found, using dummy regulator
[ 3.129209] device: 'regulator:regulator.0--platform:f10a8000.sata': device_add
[ 3.136798] devices_kset: Moving f10a8000.sata to end of list
[ 3.142575] ahci-mvebu f10a8000.sata: Linked as a consumer to regulator.0
[ 3.149396] ahci-mvebu f10a8000.sata: Looking up phy-supply from device tree
[ 3.156476] ahci-mvebu f10a8000.sata: Looking up phy-supply property in node /soc/internal-regs/sata@a8000 failed
[ 3.166789] ahci-mvebu f10a8000.sata: supply phy not found, using dummy regulator
[ 3.174331] ahci-mvebu f10a8000.sata: Looking up target-supply from device tree
[ 3.181676] ahci-mvebu f10a8000.sata: Looking up target-supply property in node /soc/internal-regs/sata@a8000 failed
[ 3.192251] ahci-mvebu f10a8000.sata: supply target not found, using dummy regulator
[ 3.200468] [1] libahci:ahci_port_init:1274: ahci-mvebu f10a8000.sata: PORT_SCR_ERR 0x0
[ 3.208511] [1] libahci:ahci_port_init:1279: ahci-mvebu f10a8000.sata: PORT_IRQ_STAT 0x0
[ 3.216644] [1] libahci:ahci_port_init:1274: ahci-mvebu f10a8000.sata: PORT_SCR_ERR 0x4040000
[ 3.225210] [1] libahci:ahci_port_init:1279: ahci-mvebu f10a8000.sata: PORT_IRQ_STAT 0x80000000
[ 3.233953] [1] libahci:ahci_init_controller:1310: ahci-mvebu f10a8000.sata: HOST_CTL 0x80000000
[ 3.242780] [1] libahci:ahci_init_controller:1313: ahci-mvebu f10a8000.sata: HOST_CTL 0x80000002
[ 3.251606] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 3.260696] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 3.269731] device: 'ata1': device_add
[ 3.273507] device: 'ata1': device_add
[ 3.277303] device: 'link1': device_add
[ 3.281168] device: 'link1': device_add
[ 3.285248] device: 'dev1.0': device_add
[ 3.289192] device: 'dev1.0': device_add
[ 3.293516] device: 'ata2': device_add
[ 3.297287] device: 'ata2': device_add
[ 3.301084] device: 'link2': device_add
[ 3.304939] device: 'link2': device_add
[ 3.308813] device: 'dev2.0': device_add
[ 3.312944] device: 'dev2.0': device_add
[ 3.317558] device: 'scsi_tmf_0': device_add
[ 3.321863] bus: 'workqueue': add device scsi_tmf_0
[ 3.326786] scsi host0: ahci-mvebu
[ 3.330596] device: 'host0': device_add
[ 3.334455] bus: 'scsi': add device host0
[ 3.338497] device: 'host0': device_add
[ 3.342860] device: 'scsi_tmf_1': device_add
[ 3.347345] bus: 'workqueue': add device scsi_tmf_1
[ 3.352277] scsi host1: ahci-mvebu
[ 3.355921] device: 'host1': device_add
[ 3.359787] bus: 'scsi': add device host1
[ 3.363829] device: 'host1': device_add
[ 3.367732] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
[ 3.375688] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
[ 3.383647] driver: 'ahci-mvebu': driver_bound: bound to device 'f10a8000.sata'
[ 3.391022] bus: 'platform': really_probe: bound device f10a8000.sata to driver ahci-mvebu
[ 3.399362] bus: 'pci': add driver sata_mv
[ 3.403500] bus: 'platform': add driver sata_mv
[ 3.408306] device class 'mtd': registering
[ 3.412540] device: 'mtd-0': device_add
[ 3.416813] bus: 'platform': add driver orion_spi
[ 3.421663] bus: 'pci': add driver ehci-pci
[ 3.425883] bus: 'platform': add driver orion-ehci
[ 3.430729] bus: 'platform': __driver_probe_device: matched device f1058000.usb with driver orion-ehci
[ 3.440080] bus: 'platform': really_probe: probing driver orion-ehci with device f1058000.usb
[ 3.448648] orion-ehci f1058000.usb: no pinctrl handle
[ 3.453882] orion-ehci f1058000.usb: EHCI Host Controller
[ 3.459322] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[ 3.467166] orion-ehci f1058000.usb: irq 42, io mem 0xf1058000
[ 3.499300] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[ 3.505557] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 3.513868] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.521125] usb usb1: Product: EHCI Host Controller
[ 3.526023] usb usb1: Manufacturer: Linux 6.1.0-rc3M95D-test-00300-g245bef8f3ba1 ehci_hcd
[ 3.534238] usb usb1: SerialNumber: f1058000.usb
[ 3.538878] device: 'usb1': device_add
[ 3.542695] bus: 'usb': add device usb1
[ 3.546660] bus: 'usb': __driver_probe_device: matched device usb1 with driver usb
[ 3.554270] bus: 'usb': really_probe: probing driver usb with device usb1
[ 3.561120] device: '1-0:1.0': device_add
[ 3.565165] bus: 'usb': add device 1-0:1.0
[ 3.569479] bus: 'usb': __driver_probe_device: matched device 1-0:1.0 with driver hub
[ 3.577345] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0
[ 3.584435] hub 1-0:1.0: USB hub found
[ 3.588247] hub 1-0:1.0: 1 port detected
[ 3.592216] device: 'usb1-port1': device_add
[ 3.596519] usb usb1-port1: adding component (ops connector_ops)
[ 3.602584] driver: 'hub': driver_bound: bound to device '1-0:1.0'
[ 3.608811] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub
[ 3.615559] device: 'ep_81': device_add
[ 3.619439] driver: 'usb': driver_bound: bound to device 'usb1'
[ 3.625567] bus: 'usb': really_probe: bound device usb1 to driver usb
[ 3.632054] device: 'ep_00': device_add
[ 3.636104] driver: 'orion-ehci': driver_bound: bound to device 'f1058000.usb'
[ 3.643559] bus: 'platform': really_probe: bound device f1058000.usb to driver orion-ehci
[ 3.651819] bus: 'pci': add driver xhci_hcd
[ 3.656043] bus: 'platform': add driver xhci-hcd
[ 3.660808] bus: 'platform': __driver_probe_device: matched device f10f8000.usb3 with driver xhci-hcd
[ 3.670071] bus: 'platform': really_probe: probing driver xhci-hcd with device f10f8000.usb3
[ 3.678746] xhci-hcd f10f8000.usb3: no pinctrl handle
[ 3.684093] xhci-hcd f10f8000.usb3: Driver xhci-hcd requests probe deferral
[ 3.691129] platform f10f8000.usb3: Added to deferred list
[ 3.696672] bus: 'usb': add driver usb-storage
[ 3.701168] usbcore: registered new interface driver usb-storage
[ 3.707442] bus: 'usb-serial': registered
[ 3.711483] bus: 'usb': add driver ftdi_sio
[ 3.715425] ata1: SATA link down (SStatus 0 SControl 300)
[ 3.715697] usbcore: registered new interface driver ftdi_sio
[ 3.726874] bus: 'usb-serial': add driver ftdi_sio
[ 3.731703] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 3.739065] i2c_dev: i2c /dev entries driver
[ 3.743361] device class 'i2c-dev': registering
[ 3.747926] bus: 'platform': add driver mv64xxx_i2c
[ 3.752849] bus: 'platform': __driver_probe_device: matched device f1011000.i2c with driver mv64xxx_i2c
[ 3.762287] bus: 'platform': really_probe: probing driver mv64xxx_i2c with device f1011000.i2c
[ 3.770961] mv64xxx_i2c f1011000.i2c: no init pinctrl state
[ 3.776905] device: 'i2c-0': device_add
[ 3.781128] bus: 'i2c': add device i2c-0
[ 3.785075] device: 'i2c-0': device_add
[ 3.789074] device: '0-004c': device_add
[ 3.793032] bus: 'i2c': add device 0-004c
[ 3.797087] device: '0-0068': device_add
[ 3.801041] bus: 'i2c': add device 0-0068
[ 3.805097] driver: 'mv64xxx_i2c': driver_bound: bound to device 'f1011000.i2c'
[ 3.812467] bus: 'platform': really_probe: bound device f1011000.i2c to driver mv64xxx_i2c
[ 3.820845] bus: 'i2c': add driver tmp421
[ 3.824877] bus: 'i2c': __driver_probe_device: matched device 0-004c with driver tmp421
[ 3.832920] bus: 'i2c': really_probe: probing driver tmp421 with device 0-004c
[ 3.840396] tmp421 0-004c: no pinctrl handle
[ 3.846056] device: 'hwmon0': device_add
[ 3.850199] driver: 'tmp421': driver_bound: bound to device '0-004c'
[ 3.856787] bus: 'i2c': really_probe: bound device 0-004c to driver tmp421
[ 3.863720] bus: 'platform': add driver armada_thermal
[ 3.868965] bus: 'platform': __driver_probe_device: matched device f10e4078.thermal with driver armada_thermal
[ 3.879014] bus: 'platform': really_probe: probing driver armada_thermal with device f10e4078.thermal
[ 3.888282] armada_thermal f10e4078.thermal: no pinctrl handle
[ 3.895404] device: 'thermal_zone0': device_add
[ 3.900216] device: 'hwmon1': device_add
[ 3.904181] driver: 'armada_thermal': driver_bound: bound to device 'f10e4078.thermal'
[ 3.912159] bus: 'platform': really_probe: bound device f10e4078.thermal to driver armada_thermal
[ 3.921110] bus: 'platform': add driver orion_wdt
[ 3.925877] bus: 'platform': __driver_probe_device: matched device f1020300.watchdog with driver orion_wdt
[ 3.935577] bus: 'platform': really_probe: probing driver orion_wdt with device f1020300.watchdog
[ 3.944495] orion_wdt f1020300.watchdog: no pinctrl handle
[ 3.950854] device: 'watchdog': device_add
[ 3.955027] device: 'watchdog0': device_add
[ 3.959484] orion_wdt: Initial timeout 171 sec
[ 3.963948] driver: 'orion_wdt': driver_bound: bound to device 'f1020300.watchdog'
[ 3.971576] bus: 'platform': really_probe: bound device f1020300.watchdog to driver orion_wdt
[ 3.980207] bus: 'platform': add driver leds-gpio
[ 3.984958] bus: 'platform': __driver_probe_device: matched device gpio-leds with driver leds-gpio
[ 3.993961] bus: 'platform': really_probe: probing driver leds-gpio with device gpio-leds
[ 4.002245] leds-gpio gpio-leds: no init pinctrl state
[ 4.007449] device: 'cobra:white:power': device_add
[ 4.012954] device: 'cobra:white:sata': device_add
[ 4.017792] driver: 'leds-gpio': driver_bound: bound to device 'gpio-leds'
[ 4.024709] leds-gpio gpio-leds: Dropping the link to f1018140.gpio
[ 4.031007] device: 'platform:f1018140.gpio--platform:gpio-leds': device_unregister
[ 4.038937] bus: 'platform': really_probe: bound device gpio-leds to driver leds-gpio
[ 4.046841] bus: 'i2c': add driver leds-pca963x
[ 4.051405] bus: 'i2c': __driver_probe_device: matched device 0-0068 with driver leds-pca963x
[ 4.059971] bus: 'i2c': really_probe: probing driver leds-pca963x with device 0-0068
[ 4.067752] leds-pca963x 0-0068: no pinctrl handle
[ 4.074897] device: 'pca963x:cobra:amber:wan': device_add
[ 4.080370] device: 'pca963x:cobra:white:wan': device_add
[ 4.085821] device: 'pca963x:cobra:white:wlan_2g': device_add
[ 4.091629] device: 'pca963x:cobra:white:wlan_5g': device_add
[ 4.097425] device: 'pca963x:cobra:white:usb2': device_add
[ 4.103366] device: 'pca963x:cobra:white:usb3_1': device_add
[ 4.109080] device: 'pca963x:cobra:white:usb3_2': device_add
[ 4.115146] device: 'pca963x:cobra:white:wps': device_add
[ 4.120608] device: 'pca963x:cobra:amber:wps': device_add
[ 4.126049] driver: 'leds-pca963x': driver_bound: bound to device '0-0068'
[ 4.132987] bus: 'i2c': really_probe: bound device 0-0068 to driver leds-pca963x
[ 4.140468] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.146505] bus: 'platform': add driver marvell-cesa
[ 4.151589] bus: 'platform': __driver_probe_device: matched device f1090000.crypto with driver marvell-cesa
[ 4.161377] bus: 'platform': really_probe: probing driver marvell-cesa with device f1090000.crypto
[ 4.170383] marvell-cesa f1090000.crypto: no pinctrl handle
[ 4.176869] marvell-cesa f1090000.crypto: CESA device successfully registered
[ 4.184048] driver: 'marvell-cesa': driver_bound: bound to device 'f1090000.crypto'
[ 4.191769] bus: 'platform': really_probe: bound device f1090000.crypto to driver marvell-cesa
[ 4.200469] device class 'extcon': registering
[ 4.204959] bus: 'platform': add driver mvebu-devbus
[ 4.210037] Registering SWP/SWPB emulation handler
[ 4.218889] devices_kset: Moving usb3_1-vbus to end of list
[ 4.224505] devices_kset: Moving usb3_1-phy to end of list
[ 4.230029] platform usb3_1-vbus: Retrying from deferred list
[ 4.235806] bus: 'platform': __driver_probe_device: matched device usb3_1-vbus with driver reg-fixed-voltage
[ 4.245681] bus: 'platform': really_probe: probing driver reg-fixed-voltage with device usb3_1-vbus
[ 4.254793] reg-fixed-voltage usb3_1-vbus: no init pinctrl state
[ 4.261321] usb3_1-vbus: 5000 mV, disabled
[ 4.265438] device: 'regulator.1': device_add
[ 4.269889] reg-fixed-voltage usb3_1-vbus: usb3_1-vbus supplying 5000000uV
[ 4.276795] driver: 'reg-fixed-voltage': driver_bound: bound to device 'usb3_1-vbus'
[ 4.284605] bus: 'platform': really_probe: bound device usb3_1-vbus to driver reg-fixed-voltage
[ 4.293349] devices_kset: Moving usb3_1-phy to end of list
[ 4.298859] platform usb3_1-phy: Retrying from deferred list
[ 4.304549] bus: 'platform': __driver_probe_device: matched device usb3_1-phy with driver usb_phy_generic
[ 4.314160] bus: 'platform': really_probe: probing driver usb_phy_generic with device usb3_1-phy
[ 4.322993] usb_phy_generic usb3_1-phy: no pinctrl handle
[ 4.328453] usb_phy_generic usb3_1-phy: Looking up vcc-supply from device tree
[ 4.335738] device: 'regulator:regulator.1--platform:usb3_1-phy': device_add
[ 4.343100] devices_kset: Moving usb3_1-phy to end of list
[ 4.348611] usb_phy_generic usb3_1-phy: Linked as a consumer to regulator.1
[ 4.355607] usb_phy_generic usb3_1-phy: Looking up vbus-supply from device tree
[ 4.362951] usb_phy_generic usb3_1-phy: Looking up vbus-supply property in node /usb3_1-phy failed
[ 4.371955] usb_phy_generic usb3_1-phy: dummy supplies not allowed for exclusive requests
[ 4.380174] driver: 'usb_phy_generic': driver_bound: bound to device 'usb3_1-phy'
[ 4.387711] bus: 'platform': really_probe: bound device usb3_1-phy to driver usb_phy_generic
[ 4.396190] devices_kset: Moving f10f8000.usb3 to end of list
[ 4.401964] platform f10f8000.usb3: Retrying from deferred list
[ 4.407949] bus: 'platform': __driver_probe_device: matched device f10f8000.usb3 with driver xhci-hcd
[ 4.417211] bus: 'platform': really_probe: probing driver xhci-hcd with device f10f8000.usb3
[ 4.425693] xhci-hcd f10f8000.usb3: no pinctrl handle
[ 4.431084] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 4.436429] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[ 4.444012] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[ 4.453725] xhci-hcd f10f8000.usb3: irq 43, io mem 0xf10f8000
[ 4.459624] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 4.465011] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[ 4.472578] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed
[ 4.479190] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 4.487499] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.494756] usb usb2: Product: xHCI Host Controller
[ 4.499659] usb usb2: Manufacturer: Linux 6.1.0-rc3M95D-test-00300-g245bef8f3ba1 xhci-hcd
[ 4.507870] usb usb2: SerialNumber: f10f8000.usb3
[ 4.512601] device: 'usb2': device_add
[ 4.516427] bus: 'usb': add device usb2
[ 4.520385] bus: 'usb': __driver_probe_device: matched device usb2 with driver usb
[ 4.527989] bus: 'usb': really_probe: probing driver usb with device usb2
[ 4.534842] device: '2-0:1.0': device_add
[ 4.538885] bus: 'usb': add device 2-0:1.0
[ 4.543034] bus: 'usb': __driver_probe_device: matched device 2-0:1.0 with driver hub
[ 4.550902] bus: 'usb': really_probe: probing driver hub with device 2-0:1.0
[ 4.557986] hub 2-0:1.0: USB hub found
[ 4.561788] hub 2-0:1.0: 1 port detected
[ 4.565980] device: 'usb2-port1': device_add
[ 4.570472] usb usb2-port1: adding component (ops connector_ops)
[ 4.576738] driver: 'hub': driver_bound: bound to device '2-0:1.0'
[ 4.582979] bus: 'usb': really_probe: bound device 2-0:1.0 to driver hub
[ 4.589912] device: 'ep_81': device_add
[ 4.593780] driver: 'usb': driver_bound: bound to device 'usb2'
[ 4.599757] bus: 'usb': really_probe: bound device usb2 to driver usb
[ 4.606228] device: 'ep_00': device_add
[ 4.610353] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.620069] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 4.628372] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.635630] usb usb3: Product: xHCI Host Controller
[ 4.640530] usb usb3: Manufacturer: Linux 6.1.0-rc3M95D-test-00300-g245bef8f3ba1 xhci-hcd
[ 4.648741] usb usb3: SerialNumber: f10f8000.usb3
[ 4.653472] device: 'usb3': device_add
[ 4.657275] bus: 'usb': add device usb3
[ 4.661585] bus: 'usb': __driver_probe_device: matched device usb3 with driver usb
[ 4.669189] bus: 'usb': really_probe: probing driver usb with device usb3
[ 4.676037] device: '3-0:1.0': device_add
[ 4.680086] bus: 'usb': add device 3-0:1.0
[ 4.684224] bus: 'usb': __driver_probe_device: matched device 3-0:1.0 with driver hub
[ 4.692091] bus: 'usb': really_probe: probing driver hub with device 3-0:1.0
[ 4.699175] hub 3-0:1.0: USB hub found
[ 4.702975] hub 3-0:1.0: 1 port detected
[ 4.707546] device: 'usb3-port1': device_add
[ 4.711856] usb usb3-port1: adding component (ops connector_ops)
[ 4.717913] driver: 'hub': driver_bound: bound to device '3-0:1.0'
[ 4.724148] bus: 'usb': really_probe: bound device 3-0:1.0 to driver hub
[ 4.730886] device: 'ep_81': device_add
[ 4.734751] driver: 'usb': driver_bound: bound to device 'usb3'
[ 4.740722] bus: 'usb': really_probe: bound device usb3 to driver usb
[ 4.747194] device: 'ep_00': device_add
[ 4.751261] driver: 'xhci-hcd': driver_bound: bound to device 'f10f8000.usb3'
[ 4.758643] bus: 'platform': really_probe: bound device f10f8000.usb3 to driver xhci-hcd
[ 4.766962] Waiting 100 sec before mounting root device...
[ 4.969572] ata2: SATA link down (SStatus 100 SControl 300)
[ 5.399296] usb 2-1: new high-speed USB device number 2 using xhci-hcd
[ 5.586274] usb 2-1: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00
[ 5.594500] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.601671] usb 2-1: Product: Mass Storage
[ 5.605784] usb 2-1: Manufacturer: Generic
[ 5.609900] usb 2-1: SerialNumber: 016E07B1
[ 5.614108] device: '2-1': device_add
[ 5.618273] bus: 'usb': add device 2-1
[ 5.622116] bus: 'usb': __driver_probe_device: matched device 2-1 with driver usb
[ 5.629641] bus: 'usb': really_probe: probing driver usb with device 2-1
[ 5.636377] usb 2-1: no default pinctrl state
[ 5.641299] device: '2-1:1.0': device_add
[ 5.645346] bus: 'usb': add device 2-1:1.0
[ 5.649507] bus: 'usb': __driver_probe_device: matched device 2-1:1.0 with driver usb-storage
[ 5.658070] bus: 'usb': really_probe: probing driver usb-storage with device 2-1:1.0
[ 5.665855] usb-storage 2-1:1.0: no default pinctrl state
[ 5.671292] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 5.677490] device: 'scsi_tmf_2': device_add
[ 5.682044] bus: 'workqueue': add device scsi_tmf_2
[ 5.687237] scsi host2: usb-storage 2-1:1.0
[ 5.691482] device: 'host2': device_add
[ 5.695341] bus: 'scsi': add device host2
[ 5.699389] device: 'host2': device_add
[ 5.703287] driver: 'usb-storage': driver_bound: bound to device '2-1:1.0'
[ 5.710215] bus: 'usb': really_probe: bound device 2-1:1.0 to driver usb-storage
[ 5.717648] device: 'ep_01': device_add
[ 5.721520] device: 'ep_82': device_add
[ 5.725384] driver: 'usb': driver_bound: bound to device '2-1'
[ 5.731260] bus: 'usb': really_probe: bound device 2-1 to driver usb
[ 5.737863] device: 'ep_00': device_add
[ 6.730894] scsi 2:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
[ 6.739024] device: 'target2:0:0': device_add
[ 6.743413] bus: 'scsi': add device target2:0:0
[ 6.747983] device: '2:0:0:0': device_add
[ 6.752312] bus: 'scsi': add device 2:0:0:0
[ 6.756534] scsi 2:0:0:0: scheduling asynchronous probe
[ 6.761791] device: '2:0:0:0': device_add
[ 6.761795] bus: 'scsi': __driver_probe_device: matched device 2:0:0:0 with driver sd
[ 6.773688] bus: 'scsi': really_probe: probing driver sd with device 2:0:0:0
[ 6.780782] sd 2:0:0:0: no default pinctrl state
[ 6.785454] device: '2:0:0:0': device_add
[ 6.790609] sd 2:0:0:0: [sda] 122880000 512-byte logical blocks: (62.9 GB/58.6 GiB)
[ 6.798937] sd 2:0:0:0: [sda] Write Protect is off
[ 6.803760] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 6.809478] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 6.818654] device: 'sda': device_add
[ 6.823310] device: '8:0': device_add
[ 6.830649] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 6.836162] driver: 'sd': driver_bound: bound to device '2:0:0:0'
[ 6.842309] bus: 'scsi': really_probe: bound device 2:0:0:0 to driver sd
[ 6.849041] sd 2:0:0:0: async probe completed
[ 7.689299] ata2: SATA link down (SStatus 0 SControl 300)
[ 7.843539] ata2: limiting SATA link speed to 1.5 Gbps
[ 8.619299] [96] libata:ata_port_classify:344: ata2: found ata device by sig
[ 8.789296] [96] libata:ata_port_classify:344: ata2: found pmp device by sig
[ 8.796376] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8.802674] ata2.15: Port Multiplier 1.2, 0x197b:0x0325 r193, 8 ports, feat 0xf/0x1f
[ 8.810483] device: 'link2.0': device_add
[ 8.814520] device: 'link2.0': device_add
[ 8.818578] device: 'dev2.0.0': device_add
[ 8.822705] device: 'dev2.0.0': device_add
[ 8.827423] device: 'link2.1': device_add
[ 8.831466] device: 'link2.1': device_add
[ 8.835522] device: 'dev2.1.0': device_add
[ 8.839882] device: 'dev2.1.0': device_add
[ 8.844037] device: 'link2.2': device_add
[ 8.848068] device: 'link2.2': device_add
[ 8.852557] device: 'dev2.2.0': device_add
[ 8.856677] device: 'dev2.2.0': device_add
[ 8.861248] device: 'link2.3': device_add
[ 8.865280] device: 'link2.3': device_add
[ 8.869353] device: 'dev2.3.0': device_add
[ 8.873470] device: 'dev2.3.0': device_add
[ 8.877614] device: 'link2.4': device_add
[ 8.881650] device: 'link2.4': device_add
[ 8.885701] device: 'dev2.4.0': device_add
[ 8.889823] device: 'dev2.4.0': device_add
[ 8.894400] device: 'link2.5': device_add
[ 8.898433] device: 'link2.5': device_add
[ 8.902704] device: 'dev2.5.0': device_add
[ 8.906823] device: 'dev2.5.0': device_add
[ 8.911212] device: 'link2.6': device_add
[ 8.915244] device: 'link2.6': device_add
[ 8.919302] device: 'dev2.6.0': device_add
[ 8.923842] device: 'dev2.6.0': device_add
[ 8.927990] device: 'link2.7': device_add
[ 8.932028] device: 'link2.7': device_add
[ 8.936298] device: 'dev2.7.0': device_add
[ 8.940423] device: 'dev2.7.0': device_add
[ 8.944787] device: 'link2.8': device_add
[ 8.948820] device: 'link2.8': device_add
[ 8.953094] device: 'dev2.8.0': device_add
[ 8.957214] device: 'dev2.8.0': device_add
[ 8.961378] device: 'link2.9': device_add
[ 8.965410] device: 'link2.9': device_add
[ 8.969470] device: 'dev2.9.0': device_add
[ 8.973588] device: 'dev2.9.0': device_add
[ 8.978186] device: 'link2.10': device_add
[ 8.982312] device: 'link2.10': device_add
[ 8.986673] device: 'dev2.10.0': device_add
[ 8.990885] device: 'dev2.10.0': device_add
[ 8.995546] device: 'link2.11': device_add
[ 8.999672] device: 'link2.11': device_add
[ 9.003812] device: 'dev2.11.0': device_add
[ 9.008018] device: 'dev2.11.0': device_add
[ 9.012255] device: 'link2.12': device_add
[ 9.016374] device: 'link2.12': device_add
[ 9.020965] device: 'dev2.12.0': device_add
[ 9.025173] device: 'dev2.12.0': device_add
[ 9.029862] device: 'link2.13': device_add
[ 9.033983] device: 'link2.13': device_add
[ 9.038123] device: 'dev2.13.0': device_add
[ 9.042335] device: 'dev2.13.0': device_add
[ 9.046588] device: 'link2.14': device_add
[ 9.050714] device: 'link2.14': device_add
[ 9.054853] device: 'dev2.14.0': device_add
[ 9.059059] device: 'dev2.14.0': device_add
[ 9.063526] ahci-mvebu f10a8000.sata: FBS is enabled
[ 9.068637] ata2.00: hard resetting link
[ 9.400820] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.407302] ata2.01: hard resetting link
[ 9.740815] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.747296] ata2.02: hard resetting link
[ 10.080816] ata2.02: SATA link down (SStatus 0 SControl 300)
[ 10.086521] ata2.03: hard resetting link
[ 10.420814] ata2.03: SATA link down (SStatus 0 SControl 300)
[ 10.426519] ata2.04: hard resetting link
[ 10.760813] ata2.04: SATA link down (SStatus 0 SControl 300)
[ 10.766517] ata2.05: hard resetting link
[ 11.100814] ata2.05: SATA link down (SStatus 0 SControl 300)
[ 11.106519] ata2.06: hard resetting link
[ 11.440812] ata2.06: SATA link down (SStatus 0 SControl 300)
[ 11.446518] ata2.07: hard resetting link
[ 11.780813] ata2.07: SATA link down (SStatus 0 SControl 300)
[ 11.786591] [96] libata:ata_dev_configure:2596: ata2.00: ata_dev_configure: cfg 49:2f00 82:41e9 83:7400 84:4000 85:0069 86:3400 87:4000 88:007f
[ 11.799524] [96] libata:ata_dump_id:1363: ata2.00: 49==0x2f00 53==0x0007 63==0x0007 64==0x0003 75==0x0000
[ 11.799524] 80==0x007c 81==0x001b 82==0x41e9 83==0x7400 84==0x4000
[ 11.799524] 88==0x007f 93==0x0000
[ 11.819432] ata2.00: ATA-6: WDC WD50ARC-5040-VOL#01, 0100 AX, max UDMA/133
[ 11.826336] ata2.00: 976773168 sectors, multi 0: LBA48
[ 11.831596] [96] libata:ata_dev_set_xfermode:4299: ata2.00: set features - xfer mode
[ 11.839465] [96] libata:ata_dev_configure:2596: ata2.00: ata_dev_configure: cfg 49:2f00 82:41e9 83:7400 84:4000 85:0069 86:3400 87:4000 88:407f
[ 11.852396] [96] libata:ata_dump_id:1363: ata2.00: 49==0x2f00 53==0x0007 63==0x0007 64==0x0003 75==0x0000
[ 11.852396] 80==0x007c 81==0x001b 82==0x41e9 83==0x7400 84==0x4000
[ 11.852396] 88==0x407f 93==0x0000
[ 11.872306] [96] libata:ata_dev_set_mode:3338: ata2.00: xfer_shift=12, xfer_mode=0x46
[ 11.880173] ata2.00: configured for UDMA/133
[ 11.884518] [96] libata:ata_dev_configure:2596: ata2.01: ata_dev_configure: cfg 49:2f00 82:41e9 83:7400 84:4000 85:0069 86:3400 87:4000 88:007f
[ 11.897449] [96] libata:ata_dump_id:1363: ata2.01: 49==0x2f00 53==0x0007 63==0x0007 64==0x0003 75==0x0000
[ 11.897449] 80==0x007c 81==0x001b 82==0x41e9 83==0x7400 84==0x4000
[ 11.897449] 88==0x007f 93==0x0000
[ 11.917355] ata2.01: ATA-6: Areca Archive, 0100 AX, max UDMA/133
[ 11.923565] ata2.01: 23437498368 sectors, multi 0: LBA48
[ 11.928991] [96] libata:ata_dev_set_xfermode:4299: ata2.01: set features - xfer mode
[ 11.936851] [96] libata:ata_dev_configure:2596: ata2.01: ata_dev_configure: cfg 49:2f00 82:41e9 83:7400 84:4000 85:0069 86:3400 87:4000 88:407f
[ 11.949782] [96] libata:ata_dump_id:1363: ata2.01: 49==0x2f00 53==0x0007 63==0x0007 64==0x0003 75==0x0000
[ 11.949782] 80==0x007c 81==0x001b 82==0x41e9 83==0x7400 84==0x4000
[ 11.949782] 88==0x407f 93==0x0000
[ 11.969692] [96] libata:ata_dev_set_mode:3338: ata2.01: xfer_shift=12, xfer_mode=0x46
[ 11.977556] ata2.01: configured for UDMA/133
[ 11.981877] ata2: EH complete
[ 11.985024] scsi 1:0:0:0: Direct-Access ATA WDC WD50ARC-5040 n/a PQ: 0 ANSI: 5
[ 11.993327] device: 'target1:0:0': device_add
[ 11.997711] bus: 'scsi': add device target1:0:0
[ 12.002289] device: '1:0:0:0': device_add
[ 12.006369] bus: 'scsi': add device 1:0:0:0
[ 12.010592] scsi 1:0:0:0: scheduling asynchronous probe
[ 12.015842] device: '1:0:0:0': device_add
[ 12.015846] bus: 'scsi': __driver_probe_device: matched device 1:0:0:0 with driver sd
[ 12.020039] scsi 1:1:0:0: Direct-Access ATA Areca Archive n/a PQ: 0 ANSI: 5
[ 12.027736] bus: 'scsi': really_probe: probing driver sd with device 1:0:0:0
[ 12.036033] device: 'target1:1:0': device_add
[ 12.042944] sd 1:0:0:0: no default pinctrl state
[ 12.047319] bus: 'scsi': add device target1:1:0
[ 12.051975] device: '1:0:0:0': device_add
[ 12.056516] device: '1:1:0:0': device_add
[ 12.060618] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 12.064932] bus: 'scsi': add device 1:1:0:0
[ 12.072106] sd 1:0:0:0: [sdb] Write Protect is off
[ 12.076287] scsi 1:1:0:0: scheduling asynchronous probe
[ 12.081085] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 12.086326] device: '1:1:0:0': device_add
[ 12.091431] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.095525] bus: 'scsi': __driver_probe_device: matched device 1:1:0:0 with driver sd
[ 12.105302] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[ 12.112379] bus: 'scsi': really_probe: probing driver sd with device 1:1:0:0
[ 12.112388] sd 1:1:0:0: no default pinctrl state
[ 12.112418] device: '1:1:0:0': device_add
[ 12.118596] device: 'sdb': device_add
[ 12.126530] sd 1:1:0:0: [sdc] 23437498368 512-byte logical blocks: (12.0 TB/10.9 TiB)
[ 12.131363] device: '8:16': device_add
[ 12.134448] sd 1:1:0:0: [sdc] Write Protect is off
[ 12.154472] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 12.159582] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.168703] sd 1:1:0:0: [sdc] Preferred minimum I/O size 512 bytes
[ 12.174920] device: 'sdc': device_add
[ 12.179893] device: '8:32': device_add
[ 12.202580] sd 1:1:0:0: [sdc] Attached SCSI removable disk
[ 12.208094] driver: 'sd': driver_bound: bound to device '1:1:0:0'
[ 12.214237] bus: 'scsi': really_probe: bound device 1:1:0:0 to driver sd
[ 12.220976] sd 1:1:0:0: async probe completed
[ 12.609536] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 12.615047] driver: 'sd': driver_bound: bound to device '1:0:0:0'
[ 12.621511] bus: 'scsi': really_probe: bound device 1:0:0:0 to driver sd
[ 12.628246] sd 1:0:0:0: async probe completed
[ 105.450861] EXT4-fs (sda): mounting ext2 file system using the ext4 subsystem
[ 105.462924] EXT4-fs (sda): mounted filesystem without journal. Quota mode: disabled.
[ 105.470739] VFS: Mounted root (ext2 filesystem) readonly on device 8:0.
[ 105.481028] devtmpfs: mounted
[ 105.484548] Freeing unused kernel image (initmem) memory: 1024K
[ 105.529387] Run /sbin/init as init process
[ 105.533500] with arguments:
[ 105.536479] /sbin/init
[ 105.539195] with environment:
[ 105.542353] HOME=/
[ 105.544720] TERM=linux
[ 105.547436] nfcConfig=4bitecc
init started: BusyBox v1.35.0 (2022-11-30 11:34:58 UTC)
Please press Enter to activate this console.
BusyBox v1.35.0 (2022-11-30 11:34:58 UTC) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/ # lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
sda 8:0 1 58.6G 0 disk /
sdb 8:16 1 465.8G 0 disk
sdc 8:32 1 10.9T 0 disk
/ # blkid
/dev/sdc: LABEL="RTArchive" UUID="dbcea8a0-ed94-4c76-91d5-5a5b80face96" TYPE="btrfs"
/dev/sdb: LABEL="RTWork" UUID="c8979d5b-c532-42d0-9111-89a92c9c8620" TYPE="btrfs"
/dev/sda: LABEL="GRAPHRT" UUID="9f9cd20d-80c4-4b42-a927-bf233e51a155" TYPE="ext2"
/ #
So, it works!
What next? Should I contact David Milburn <dmilburn@xxxxxxxxxx> (the commit author) and ask for a better fix?
@ Pali Rohar:
I could't find the errata you mentioned. If you have it, please take a look at the commit above and see if it is affected in any. Thanks.
Marius Dinu
