Re: Bug report for ahci-mvebu driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



January 24, 2023 11:54 AM, "Damien Le Moal" <damien.lemoal@xxxxxxxxxxxxxxxxxx> wrote:

> OK. Good. But from the trace below, it looks like you have the previous
> patch still applied. Can you try only the above patch ?

Done:
[ 15.135173][ T113] hardreset, Online=>Offline
[ 15.135182][ T113] sata_set_spd_needed, scontrol=0x300
[ 15.139656][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 15.144934][ T113] __sata_set_spd_needed, corrected limit=0xFFFFFFFF
[ 15.151235][ T113] __sata_set_spd_needed, target=0x0
[ 15.157725][ T113] __sata_set_spd_needed, spd=0x0
[ 15.162805][ T113] __sata_set_spd_needed, final *scontrol=0x300
[ 15.168708][ T113] resume, do loop
[ 15.403902][ T113] resume, after do loop
[ 15.463901][ T113] debounce, SCR=0x100
[ 15.513923][ T113] debounce, SCR=0x101
[ 15.573901][ T113] debounce, SCR=0x100
[ 15.633901][ T113] debounce, SCR=0x101
[ 15.693901][ T113] debounce, SCR=0x100
[ 15.753901][ T113] debounce, SCR=0x101
[ 15.813900][ T113] debounce, SCR=0x100
[ 15.873901][ T113] debounce, SCR=0x101
[ 15.933900][ T113] debounce, SCR=0x100
[ 15.993900][ T113] debounce, SCR=0x100
[ 16.053900][ T113] debounce, SCR=0x100
[ 16.113901][ T113] debounce, SCR=0x100
[ 16.173900][ T113] debounce, SCR=0x100
[ 16.233901][ T113] debounce, SCR=0x0
[ 16.293901][ T113] debounce, SCR=0x0
[ 16.353900][ T113] debounce, SCR=0x0
[ 16.413901][ T113] debounce, SCR=0x0
[ 16.473901][ T113] debounce, SCR=0x100
[ 16.477586][ T113] resume, return at end of function
[ 16.481446][ T113] hardreset, ata_phys_link_offline check failed
[ 16.486550][ T113] ata2: SATA link down (SStatus 100 SControl 300)
[ 16.499019][ T113] sata_down_spd_limit: limit 0x1, cur spd 0x0, saved limit 0xffffffff, hw limit
0xffffffff
[ 16.508914][ T113] ata2: limiting SATA link speed to 1.5 Gbps
[ 16.514800][ T113] hardreset, Online=>Offline
[ 16.514807][ T113] sata_set_spd_needed, scontrol=0x300
[ 16.519276][ T113] __sata_set_spd_needed, initial limit=0x1
[ 16.524544][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 16.530235][ T113] __sata_set_spd_needed, target=0x1
[ 16.536119][ T113] __sata_set_spd_needed, spd=0x0
[ 16.541199][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 16.546046][ T113] __sata_set_spd_needed, initial limit=0x1
[ 16.552085][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 16.557790][ T113] __sata_set_spd_needed, target=0x1
[ 16.563655][ T113] __sata_set_spd_needed, spd=0x0
[ 16.568748][ T113] __sata_set_spd_needed, final *scontrol=0x314
[ 16.574637][ T113] resume, do loop
[ 16.803902][ T113] resume, after do loop
[ 16.863901][ T113] debounce, SCR=0x113
[ 16.923901][ T113] debounce, SCR=0x113
[ 16.983901][ T113] debounce, SCR=0x113
[ 17.043900][ T113] debounce, SCR=0x113
[ 17.103901][ T113] debounce, SCR=0x113
[ 17.163901][ T113] debounce, SCR=0x113
[ 17.223901][ T113] debounce, SCR=0x113
[ 17.283900][ T113] debounce, SCR=0x113
[ 17.343900][ T113] debounce, SCR=0x113
[ 17.347761][ T113] resume, return at end of function
[ 17.351620][ T113] hardreset, Offline=>Online
[ 17.361184][ T113] hardreset, sata_pmp_supported, before check_ready
[ 17.533905][ T113] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 17.547634][ T113] ata2.15: Port Multiplier 1.2, 0x197b:0x0325 r193, 8 ports, feat 0xf/0x1f
[ 17.556257][ T113] device: 'link2.0': device_add
[ 17.561066][ T113] device: 'link2.0': device_add
[ 17.566026][ T113] device: 'dev2.0.0': device_add
[ 17.570872][ T113] device: 'dev2.0.0': device_add
[ 17.575869][ T113] device: 'link2.1': device_add
[ 17.580628][ T113] device: 'link2.1': device_add
[ 17.585489][ T113] device: 'dev2.1.0': device_add
[ 17.590370][ T113] device: 'dev2.1.0': device_add
...
[ 17.830354][ T113] device: 'link2.14': device_add
[ 17.835236][ T113] device: 'link2.14': device_add
[ 17.840174][ T113] device: 'dev2.14.0': device_add
[ 17.845134][ T113] device: 'dev2.14.0': device_add
[ 17.850194][ T113] ahci-mvebu f10a8000.sata: FBS is enabled
[ 17.855948][ T113] ata2.00: SCR_CONTROL = 0x300
[ 17.860630][ T113] ata2.01: SCR_CONTROL = 0x300
[ 17.865332][ T113] ata2.02: SCR_CONTROL = 0x300
[ 17.870010][ T113] ata2.03: SCR_CONTROL = 0x300
[ 17.874720][ T113] ata2.04: SCR_CONTROL = 0x300
[ 17.879397][ T113] ata2.05: SCR_CONTROL = 0x300
[ 17.884140][ T113] ata2.06: SCR_CONTROL = 0x300
[ 17.888817][ T113] ata2.07: SCR_CONTROL = 0x300
[ 17.893568][ T113] ata2.00: hard resetting link
[ 17.898247][ T113] hardreset, Online=>Offline
[ 17.898287][ T113] sata_set_spd_needed, scontrol=0x300
[ 17.902759][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 17.908037][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 17.914351][ T113] __sata_set_spd_needed, target=0x1
[ 17.920217][ T113] __sata_set_spd_needed, spd=0x0
[ 17.925308][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 17.930221][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 17.936287][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 17.942587][ T113] __sata_set_spd_needed, target=0x1
[ 17.948465][ T113] __sata_set_spd_needed, spd=0x0
[ 17.953544][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 17.959580][ T113] resume, do loop
[ 18.193937][ T113] resume, after do loop
[ 18.202581][ T113] debounce, SCR=0x123
[ 18.211737][ T113] debounce, SCR=0x123
[ 18.220718][ T113] debounce, SCR=0x123
[ 18.229700][ T113] debounce, SCR=0x123
[ 18.238661][ T113] debounce, SCR=0x123
[ 18.247624][ T113] debounce, SCR=0x123
[ 18.256584][ T113] debounce, SCR=0x123
[ 18.265545][ T113] debounce, SCR=0x123
[ 18.274506][ T113] debounce, SCR=0x123
[ 18.283466][ T113] debounce, SCR=0x123
[ 18.292447][ T113] debounce, SCR=0x123
[ 18.301429][ T113] debounce, SCR=0x123
[ 18.305373][ T113] resume, return at end of function
[ 18.309265][ T113] hardreset, Offline=>Online
[ 18.318828][ T113] hardreset, after check_ready
[ 18.319045][ T113] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 18.330915][ T113] ata2.01: hard resetting link
[ 18.335582][ T113] hardreset, Online=>Offline
[ 18.335619][ T113] sata_set_spd_needed, scontrol=0x300
[ 18.340090][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 18.345365][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 18.351665][ T113] __sata_set_spd_needed, target=0x1
[ 18.357543][ T113] __sata_set_spd_needed, spd=0x0
[ 18.362624][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 18.367549][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 18.373589][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 18.379911][ T113] __sata_set_spd_needed, target=0x1
[ 18.385790][ T113] __sata_set_spd_needed, spd=0x0
[ 18.390870][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 18.396900][ T113] resume, do loop
[ 18.623935][ T113] resume, after do loop
[ 18.632578][ T113] debounce, SCR=0x123
[ 18.641735][ T113] debounce, SCR=0x123
[ 18.650715][ T113] debounce, SCR=0x123
[ 18.659695][ T113] debounce, SCR=0x123
[ 18.668654][ T113] debounce, SCR=0x123
[ 18.677614][ T113] debounce, SCR=0x123
[ 18.686575][ T113] debounce, SCR=0x123
[ 18.695535][ T113] debounce, SCR=0x123
[ 18.704496][ T113] debounce, SCR=0x123
[ 18.713456][ T113] debounce, SCR=0x123
[ 18.722438][ T113] debounce, SCR=0x123
[ 18.731421][ T113] debounce, SCR=0x123
[ 18.735365][ T113] resume, return at end of function
[ 18.739256][ T113] hardreset, Offline=>Online
[ 18.748820][ T113] hardreset, after check_ready
[ 18.749041][ T113] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

Marius Dinu





[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux