Linux Kernel I2C
Thread Index
[
Prev Page
][
Next Page
]
Re: [PATCH v3] i2c: designware: add reset interface
From
: Arnd Bergmann <arnd@xxxxxxxx>
[PATCH] i2c: print correct device invalid address
From
: John Garry <john.garry@xxxxxxxxxx>
[PATCH] i2c: core: helper function to detect slave mode
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
Re: [PATCH v7 05/12] mux: support simplified bindings for single-user gpio mux
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH v5 6/7] i2c: designware: enable SLAVE in platform module
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v2] i2c: do not enable fall back to Host Notify by default
From
: Pali Rohár <pali.rohar@xxxxxxxxx>
Re: [PATCH v5 6/7] i2c: designware: enable SLAVE in platform module
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
[PATCH] i2c: exynos5: fix arbitration lost handling
From
: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
[PATCH] i2c: i2c-cadence: Don't register the adapter until it's ready
From
: Mike Looijmans <mike.looijmans@xxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
[PATCH v8 3/5] ARM: dts: stm32: Add I2C1 support for STM32F429 SoC
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v8 1/5] dt-bindings: Document the STM32 I2C bindings
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v8 0/5] Add support for the STM32F4 I2C
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v8 2/5] i2c: Add STM32F4 I2C driver
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v8 4/5] ARM: dts: stm32: Add I2C1 support for STM32429 eval board
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v8 5/5] ARM: configs: stm32: Add I2C support for STM32 defconfig
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Pali Rohár <pali.rohar@xxxxxxxxx>
[PATCH v2] i2c: do not enable fall back to Host Notify by default
From
: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
[PATCH v2 3/5] i2c: mux: pca954x: Add interrupt controller support
From
: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
[PATCH v2 5/5] i2c: mux: pca954x: Add irq_mask_en to delay enabling irqs
From
: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
[PATCH v2 0/5] i2c: mux: pca954x: Add interrupt controller support
From
: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
[PATCH v2 1/5] i2c: mux: pca954x: Add missing pca9542 definition to chip_desc
From
: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
[PATCH v2 2/5] dt: bindings: i2c-mux-pca954x: Add documentation for interrupt controller
From
: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
[PATCH v2 4/5] dt: bindings: i2c-mux-pca954x: Add documentation for i2c-mux-irq-mask-en
From
: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
Re: [PATCH 5/5] i2c: mux: pca954x: Add irq_mask_en to delay enabling irqs
From
: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
Re: [PATCH] i2c: do not enable fall back to Host Notify by default
From
: kbuild test robot <lkp@xxxxxxxxx>
Re: [PATCH] i2c: do not enable fall back to Host Notify by default
From
: kbuild test robot <lkp@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
[PATCH] i2c: do not enable fall back to Host Notify by default
From
: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Jean Delvare <jdelvare@xxxxxxx>
Re: [PATCH] iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
From
: Jacob Pan <jacob.jun.pan@xxxxxxxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Pali Rohár <pali.rohar@xxxxxxxxx>
Re: [PATCH v3] i2c: designware: add reset interface
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v3] i2c: designware: add reset interface
From
: Arnd Bergmann <arnd@xxxxxxxx>
Re: [PATCH 3/5] i2c: mux: pca954x: Add interrupt controller support
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH 2/5] dt: bindings: i2c-mux-pca954x: Add documentation for interrupt controller
From
: Rob Herring <robh@xxxxxxxxxx>
Re: [PATCH 2/5] dt: bindings: i2c-mux-pca954x: Add documentation for interrupt controller
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH 3/5] i2c: mux: pca954x: Add interrupt controller support
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH 5/5] i2c: mux: pca954x: Add irq_mask_en to delay enabling irqs
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH 4/5] dt: bindings: i2c-mux-pca954x: Add documentation for i2c-mux-irq-mask-en
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH 1/5] i2c: mux: pca954x: Add missing pca9542 definition to chip_desc
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH 5/5] i2c: mux: pca954x: Add irq_mask_en to delay enabling irqs
From
: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
[PATCH 4/5] dt: bindings: i2c-mux-pca954x: Add documentation for i2c-mux-irq-mask-en
From
: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
[PATCH 1/5] i2c: mux: pca954x: Add missing pca9542 definition to chip_desc
From
: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
[PATCH 0/5] i2c: mux: pca954x: Add interrupt controller support
From
: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
[PATCH 2/5] dt: bindings: i2c-mux-pca954x: Add documentation for interrupt controller
From
: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
[PATCH 3/5] i2c: mux: pca954x: Add interrupt controller support
From
: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
[PATCH v7 06/12] iio: inkern: api for manipulating ext_info of iio channels
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v7 03/12] mux: minimal mux subsystem and gpio-based mux controller
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v7 07/12] dt-bindings: iio: iio-mux: document iio-mux bindings
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v7 09/12] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v7 10/12] i2c: i2c-mux-simple: new driver
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v7 04/12] dt-bindings: simplified bindings for single-user gpio mux
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v7 05/12] mux: support simplified bindings for single-user gpio mux
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v7 11/12] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v7 08/12] iio: multiplexer: new iio category and iio-mux driver
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v7 12/12] mux: adg792a: add mux controller driver for ADG792A/G
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v7 02/12] dt-bindings: document devicetree bindings for mux-controllers and mux-gpio
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v7 00/12] mux controller abstraction and iio/i2c muxes
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v7 01/12] devres: trivial whitespace fix
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Pali Rohár <pali.rohar@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Pali Rohár <pali.rohar@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Pali Rohár <pali.rohar@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Pali Rohár <pali.rohar@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
Re: [PATCH v4 00/14] ARM: dts: r8a779x: use demuxer for I2C
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Jean Delvare <jdelvare@xxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Jean Delvare <jdelvare@xxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Pali Rohár <pali.rohar@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
[Patch V1] i2c: imx-lpi2c: add VLLS mode support
From
: Gao Pan <pandy.gao@xxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Pali Rohár <pali.rohar@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Pali Rohár <pali.rohar@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Re: [PATCH linux 5/6] hwmon: occ: Add hwmon implementation for the P8 OCC
From
: Rob Herring <robh@xxxxxxxxxx>
Re: [PATCH] iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Pali Rohár <pali.rohar@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Pali Rohár <pali.rohar@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
RE: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: <Mario.Limonciello@xxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Pali Rohár <pali.rohar@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Re: [PATCH] iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
From
: Jacob Pan <jacob.jun.pan@xxxxxxxxxxxxxxx>
Re: [PATCH 4/5] mfd: axp20x: Drop wrong AXP288_PMIC_ADC_EN define
From
: Lee Jones <lee.jones@xxxxxxxxxx>
Re: [PATCH 3/5] mfd: axp20x: Fix axp288 PEK_DBR and PEK_DBF irqs being swapped
From
: Lee Jones <lee.jones@xxxxxxxxxx>
Re: [PATCH 2/5] mfd: axp20x: Add missing axp288 irqs
From
: Lee Jones <lee.jones@xxxxxxxxxx>
Re: [PATCH 1/5] mfd: axp20x: Use IRQF_TRIGGER_LOW on the axp288
From
: Lee Jones <lee.jones@xxxxxxxxxx>
Re: [PATCH v7 3/4] arm64: dts: marvell: Add I2C definitions for the Armada 3700
From
: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Pali Rohár <pali.rohar@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
Re: [PATCH v6 8/9] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH v6 8/9] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
From
: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v6 8/9] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH v6 9/9] misc: mux-adg792a: add mux controller driver for ADG792A/G
From
: Jonathan Cameron <jic23@xxxxxxxxxx>
Re: [PATCH v6 8/9] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
From
: Jonathan Cameron <jic23@xxxxxxxxxx>
Re: [PATCH v6 8/9] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH v6 7/9] i2c: i2c-mux-simple: new driver
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [Intel-gfx] [RFC 3/4] drm/i915: valleyview: Make intel_set_rps get FORCEWAKE_MEDIA
From
: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Re: [Intel-gfx] [RFC 3/4] drm/i915: valleyview: Make intel_set_rps get FORCEWAKE_MEDIA
From
: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Re: [Intel-gfx] [RFC 3/4] drm/i915: valleyview: Make intel_set_rps get FORCEWAKE_MEDIA
From
: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Re: [Intel-gfx] [RFC 3/4] drm/i915: valleyview: Make intel_set_rps get FORCEWAKE_MEDIA
From
: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Re: [Intel-gfx] [RFC 3/4] drm/i915: valleyview: Make intel_set_rps get FORCEWAKE_MEDIA
From
: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Re: [RFC 1/4] x86/platform/intel/iosf_mbi: Add a mutex for punit access
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [RFC 1/4] x86/platform/intel/iosf_mbi: Add a mutex for punit access
From
: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Re: [Intel-gfx] [RFC 3/4] drm/i915: valleyview: Make intel_set_rps get FORCEWAKE_MEDIA
From
: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Re: [PATCH v7 2/5] i2c: Add STM32F4 I2C driver
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
Re: [Intel-gfx] [RFC 3/4] drm/i915: valleyview: Make intel_set_rps get FORCEWAKE_MEDIA
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [Intel-gfx] [RFC 3/4] drm/i915: valleyview: Make intel_set_rps get FORCEWAKE_MEDIA
From
: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Re: [PATCH v6 9/9] misc: mux-adg792a: add mux controller driver for ADG792A/G
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH v5 5/6] i2c: designware-baytrail: Fix race when resetting the semaphore
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v5 5/6] i2c: designware-baytrail: Fix race when resetting the semaphore
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH v5 5/6] i2c: designware-baytrail: Fix race when resetting the semaphore
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v6 2/9] misc: minimal mux subsystem and gpio-based mux controller
From
: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v6 2/9] misc: minimal mux subsystem and gpio-based mux controller
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH v2 4/5] i2c: designware-baytrail: Force the CPU to C1 state while holding the punit semaphore
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [Intel-gfx] [RFC 3/4] drm/i915: valleyview: Make intel_set_rps get FORCEWAKE_MEDIA
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [Intel-gfx] [RFC 3/4] drm/i915: valleyview: Make intel_set_rps get FORCEWAKE_MEDIA
From
: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
[PATCH v5 6/6] i2c: designware-baytrail: Add support for cherrytrail
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH v5 5/6] i2c: designware-baytrail: Fix race when resetting the semaphore
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH v5 4/6] i2c: designware-baytrail: Disallow the CPU to enter C6 or C7 while holding the punit semaphore
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH v5 3/6] i2c: designware-baytrail: Only check iosf_mbi_available() for shared hosts
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH v5 2/6] i2c: designware-baytrail: Pass dw_i2c_dev into helper functions
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH v5 1/6] i2c: designware: Rename accessor_flags to flags
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[RFC 4/4] drm/i915: valleyview: Take punit lock when modifying punit settings
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[RFC 3/4] drm/i915: valleyview: Make intel_set_rps get FORCEWAKE_MEDIA
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[RFC 2/4] i2c: designware-baytrail: Take punit lock on bus acquire
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[RFC 1/4] x86/platform/intel/iosf_mbi: Add a mutex for punit access
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[RFC 0/4] Coordinate pmic i2c bus and i915 punit accesses
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH v6 7/9] i2c: i2c-mux-simple: new driver
From
: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
[PATCH] i2c: designware-baytrail: Fix race when resetting the semaphore
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH 0/1] i2c: designware-baytrail: Fix race when resetting the semaphore
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH v6 0/9] mux controller abstraction and iio/i2c muxes
From
: Jonathan Cameron <jic23@xxxxxxxxxx>
Re: [PATCH v6 9/9] misc: mux-adg792a: add mux controller driver for ADG792A/G
From
: Jonathan Cameron <jic23@xxxxxxxxxx>
Re: [PATCH] iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH v6 8/9] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
From
: Jonathan Cameron <jic23@xxxxxxxxxx>
Re: [PATCH v6 7/9] i2c: i2c-mux-simple: new driver
From
: Jonathan Cameron <jic23@xxxxxxxxxx>
Re: [PATCH linux 5/6] hwmon: occ: Add hwmon implementation for the P8 OCC
From
: kbuild test robot <lkp@xxxxxxxxx>
Re: [PATCH v5 5/7] i2c: designware: add SLAVE mode functions
From
: kbuild test robot <lkp@xxxxxxxxx>
Re: [PATCH v2 4/5] i2c: designware-baytrail: Force the CPU to C1 state while holding the punit semaphore
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH v6 5/9] iio: multiplexer: new iio category and iio-mux driver
From
: Jonathan Cameron <jic23@xxxxxxxxxx>
Re: [PATCH v6 2/9] misc: minimal mux subsystem and gpio-based mux controller
From
: Jonathan Cameron <jic23@xxxxxxxxxx>
Re: [PATCH v6 1/9] dt-bindings: document devicetree bindings for mux-controllers and mux-gpio
From
: Jonathan Cameron <jic23@xxxxxxxxxx>
Re: [PATCH v6 4/9] dt-bindings: iio: iio-mux: document iio-mux bindings
From
: Jonathan Cameron <jic23@xxxxxxxxxx>
Re: [PATCH v6 3/9] iio: inkern: api for manipulating ext_info of iio channels
From
: Jonathan Cameron <jic23@xxxxxxxxxx>
Re: [PATCH linux 2/6] hwmon: occ: Add sysfs interface
From
: Guenter Roeck <linux@xxxxxxxxxxxx>
Re: [PATCH linux 1/6] hwmon: Add core On-Chip Controller support for POWER CPUs
From
: kbuild test robot <lkp@xxxxxxxxx>
Re: [PATCH] iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
From
: Jacob Pan <jacob.jun.pan@xxxxxxxxxxxxxxx>
[PATCH linux 3/6] hwmon: occ: Add I2C transport implementation for SCOM operations
From
: eajames.ibm@xxxxxxxxx
[PATCH linux 1/6] hwmon: Add core On-Chip Controller support for POWER CPUs
From
: eajames.ibm@xxxxxxxxx
[PATCH linux 2/6] hwmon: occ: Add sysfs interface
From
: eajames.ibm@xxxxxxxxx
[PATCH linux 5/6] hwmon: occ: Add hwmon implementation for the P8 OCC
From
: eajames.ibm@xxxxxxxxx
[PATCH linux 6/6] hwmon: occ: Add callbacks for parsing P9 OCC datastructures
From
: eajames.ibm@xxxxxxxxx
[PATCH linux 4/6] hwmon: occ: Add callbacks for parsing P8 OCC datastructures
From
: eajames.ibm@xxxxxxxxx
[PATCH linux 0/6] drivers: hwmon: Add On-Chip Controller driver
From
: eajames.ibm@xxxxxxxxx
Re: [PATCH] iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
From
: Jonathan Cameron <jic23@xxxxxxxxxx>
Re: [PATCH v7 3/5] ARM: dts: stm32: Add I2C1 support for STM32F429 SoC
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
Re: [PATCH v7 3/5] ARM: dts: stm32: Add I2C1 support for STM32F429 SoC
From
: Linus Walleij <linus.walleij@xxxxxxxxxx>
[PATCH] i2c: fix spelling mistake: "insufficent" -> "insufficient"
From
: Colin King <colin.king@xxxxxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Pali Rohár <pali.rohar@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Michał Kępień <kernel@xxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Pali Rohár <pali.rohar@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Michał Kępień <kernel@xxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Pali Rohár <pali.rohar@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Michał Kępień <kernel@xxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Valdis.Kletnieks@xxxxxx
Re: [PATCH v7 2/5] i2c: Add STM32F4 I2C driver
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
Re: [PATCH v7 2/5] i2c: Add STM32F4 I2C driver
From
: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Re: [PATCH v5 6/7] i2c: designware: enable SLAVE in platform module
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
Re: [PATCH v5 6/7] i2c: designware: enable SLAVE in platform module
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v5 6/7] i2c: designware: enable SLAVE in platform module
From
: Carlos Palminha <CARLOS.PALMINHA@xxxxxxxxxxxx>
Re: [PATCH v5 6/7] i2c: designware: enable SLAVE in platform module
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
Re: [PATCH v5 6/7] i2c: designware: enable SLAVE in platform module
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v5 5/7] i2c: designware: add SLAVE mode functions
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
Re: [PATCH v5 6/7] i2c: designware: enable SLAVE in platform module
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
Re: [PATCH v5 7/7] i2c: designware: style changes in existing code
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v5 6/7] i2c: designware: enable SLAVE in platform module
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v5 5/7] i2c: designware: add SLAVE mode functions
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v5 2/7] i2c: designware: refactoring of the i2c-designware
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
Re: [PATCH v5 4/7] i2c: designware: introducing I2C_SLAVE definitions
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v5 2/7] i2c: designware: refactoring of the i2c-designware
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
[PATCH v5 6/7] i2c: designware: enable SLAVE in platform module
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
[PATCH v5 5/7] i2c: designware: add SLAVE mode functions
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
[PATCH v5 3/7] i2c: designware: MASTER mode as separated driver
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
[PATCH v5 2/7] i2c: designware: refactoring of the i2c-designware
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
[PATCH v5 0/7] i2c: designware: add I2C SLAVE support
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
[PATCH v5 7/7] i2c: designware: style changes in existing code
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
[PATCH v5 4/7] i2c: designware: introducing I2C_SLAVE definitions
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
[PATCH v5 1/7] i2c: designware: Cleaning and comment style fixes.
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Pali Rohár <pali.rohar@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Pali Rohár <pali.rohar@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Valdis.Kletnieks@xxxxxx
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [PATCH v3 resend] i2c: designware: add reset interface
From
: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
[PATCH v3 resend] i2c: designware: add reset interface
From
: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Pali Rohár <pali.rohar@xxxxxxxxx>
[PATCH] i2c: i801: Register optional lis3lv02d i2c device on Dell machines
From
: Pali Rohár <pali.rohar@xxxxxxxxx>
Re: [PATCH v2 4/5] i2c: designware-baytrail: Force the CPU to C1 state while holding the punit semaphore
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH v2 4/5] i2c: designware-baytrail: Force the CPU to C1 state while holding the punit semaphore
From
: Len Brown <lenb@xxxxxxxxxx>
[PATCH v3] i2c: designware: add reset interface
From
: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx>
Re: [PATCH v2] i2c: designware: add reset interface
From
: zhangfei <zhangfei.gao@xxxxxxxxxx>
Re: [PATCH v7 3/5] ARM: dts: stm32: Add I2C1 support for STM32F429 SoC
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
Re: [PATCH v7 2/5] i2c: Add STM32F4 I2C driver
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
Re: [v1] i2c: busses: i2c-designware-pcidrv:- Unmap region obtained by pcim_iomap_regions
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [v1] i2c: busses: i2c-designware-pcidrv:- Unmap region obtained by pcim_iomap_regions
From
: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
Re: [v1] i2c: busses: i2c-designware-pcidrv:- Unmap region obtained by pcim_iomap_regions
From
: kbuild test robot <lkp@xxxxxxxxx>
Re: [v1] i2c: busses: i2c-designware-pcidrv:- Unmap region obtained by pcim_iomap_regions
From
: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Re: [PATCH v2] i2c: designware: add reset interface
From
: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
[v1] i2c: busses: i2c-designware-pcidrv:- Unmap region obtained by pcim_iomap_regions
From
: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
Re: [PATCH v7 2/5] i2c: Add STM32F4 I2C driver
From
: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Re: [PATCH v7 3/5] ARM: dts: stm32: Add I2C1 support for STM32F429 SoC
From
: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Re: [v1] i2c: busses: i2c-designware-pcidrv:- Handle return NULL error from pcim_iomap_table
From
: arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
[PATCH] i2c: mv64xxx: add suspend/resume support
From
: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
Re: [PATCH v4 3/5] i2c: designware: Add slave definitions
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v4 3/5] i2c: designware: Add slave definitions
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
Re: [v1] i2c: busses: i2c-designware-pcidrv:- Handle return NULL error from pcim_iomap_table
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
[PATCH v7 2/5] i2c: Add STM32F4 I2C driver
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v7 3/5] ARM: dts: stm32: Add I2C1 support for STM32F429 SoC
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v7 1/5] dt-bindings: Document the STM32 I2C bindings
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v7 4/5] ARM: dts: stm32: Add I2C1 support for STM32429 eval board
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v7 5/5] ARM: configs: stm32: Add I2C support for STM32 defconfig
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v7 0/5] Add support for the STM32F4 I2C
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
Re: [v1] i2c: busses: i2c-designware-pcidrv:- Handle return NULL error from pcim_iomap_table
From
: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
[v1] i2c: busses: i2c-designware-pcidrv:- Handle return NULL error from pcim_iomap_table
From
: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
Re: [PATCH] i2c: uniphier[-f]: fix bool logic calculation
From
: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
Re: [PATCH] i2c: uniphier[-f]: fix bool logic calculation
From
: Joe Perches <joe@xxxxxxxxxxx>
Re: [PATCH] i2c: uniphier[-f]: fix bool logic calculation
From
: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
Re: [PATCH] misc: eeprom: implement compatible DT probing
From
: Linus Walleij <linus.walleij@xxxxxxxxxx>
[PULL REQUEST] i2c for 4.10
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: interface to trigger a bus recovery sequence
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
interface to trigger a bus recovery sequence
From
: Jorge Ramirez <jorge.ramirez-ortiz@xxxxxxxxxx>
Re: [PATCH] i2c: mux: mlxcpld: fix i2c mux selection caching
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
[PATCH] i2c: mux: mlxcpld: fix i2c mux selection caching
From
: Peter Rosin <peda@xxxxxxxxxx>
RE: [PATCH] i2c: mux: mlxcpld: fix i2c mux selection caching
From
: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
Re: [PATCH] i2c: mux: mlxcpld: fix i2c mux selection caching
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH V5] i2c: designware: fix wrong Tx/Rx FIFO for ACPI
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH V1] i2c: xgene: Fix missing code of DTB support
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH] i2c: mux: pca954x: fix i2c mux selection caching
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH 3/4] i2c: octeon: thunderx: Limit register access retries
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH 4/4] power: supply: axp288_fuel_gauge: Drop platform_data dependency
From
: Sebastian Reichel <sre@xxxxxxxxxx>
Re: [PATCH 3/4] power: supply: axp288_fuel_gauge: Read 12 bit values 2 registers at a time
From
: Sebastian Reichel <sre@xxxxxxxxxx>
Re: [PATCH 2/4] power: supply: axp288_fuel_gauge: Read 15 bit values 2 registers at a time
From
: Sebastian Reichel <sre@xxxxxxxxxx>
[PATCH] i2c: mux: pca954x: fix i2c mux selection caching
From
: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
Re: [PATCH] i2c: mux: pca954x: fix i2c mux selection caching
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: i2c: xiic: Strange clk_prepare_enable() in xiic_i2c_remove()
From
: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxx>
Re: [PATCH] i2c: mux: pca954x: fix i2c mux selection caching
From
: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
i2c: xiic: Strange clk_prepare_enable() in xiic_i2c_remove()
From
: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
Re: [PATCH] i2c: i2c-mux-pca954x: only reset last channel on error
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH] i2c: mux: pca954x: fix i2c mux selection caching
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH] i2c: i2c-mux-pca954x: only reset last channel on error
From
: Vivien Didelot <vivien.didelot@xxxxxxxxxxxxxxxxxxxx>
[PATCH] i2c: mux: pca954x: fix i2c mux selection caching
From
: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
Re: [PATCH v4] i2c: designware: Cleaning and comment style fixes.
From
: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
[PATCH v4] i2c: designware: Cleaning and comment style fixes.
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
Re: [PATCH v2] i2c: designware: add reset interface
From
: zhangfei <zhangfei.gao@xxxxxxxxxx>
Re: [PATCH v2] i2c: designware: add reset interface
From
: zhangfei <zhangfei.gao@xxxxxxxxxx>
[PULL REQUEST] i2c for 4.10
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH v6 2/5] i2c: Add STM32F4 I2C driver
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH v6 2/5] i2c: Add STM32F4 I2C driver
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH v6 2/5] i2c: Add STM32F4 I2C driver
From
: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Re: [PATCH V5] i2c: designware: fix wrong Tx/Rx FIFO for ACPI
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v2] i2c: designware: Cleaning and comment style fixes.
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH v2] i2c: designware: Cleaning and comment style fixes.
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
Re: [PATCH v2] i2c: designware: add reset interface
From
: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
Re: [PATCH 5/5] mfd: axp20x: Fix axp288 volatile ranges
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH v2] i2c: designware: add reset interface
From
: Ramiro Oliveira <Ramiro.Oliveira@xxxxxxxxxxxx>
Re: [PATCH v6 2/5] i2c: Add STM32F4 I2C driver
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v3] i2c: designware: Cleaning and comment style fixes.
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
Re: [PATCH v2] i2c: designware: Cleaning and comment style fixes.
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
[PATCH v2] i2c: designware: Cleaning and comment style fixes.
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
Re: [PATCH v2] i2c: designware: add reset interface
From
: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
Re: [PATCH v2] i2c: designware: add reset interface
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
[PATCH v2] i2c: designware: add reset interface
From
: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx>
Re: [PATCH] i2c: designware: add reset interface
From
: zhangfei <zhangfei.gao@xxxxxxxxxx>
Re: [[RFC V3] 1/1] i2c: imx: add slave support
From
: "Frkuska, Joshua" <joshua_frkuska@xxxxxxxxxx>
Re: [[RFC V3] 1/1] i2c: imx: add slave support
From
: "Frkuska, Joshua" <joshua_frkuska@xxxxxxxxxx>
Re: [PATCH] i2c: designware: add reset interface
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH 1/4] power: supply: axp288_fuel_gauge: Fix fuel_gauge_reg_readb return on error
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
[PATCH 3/4] power: supply: axp288_fuel_gauge: Read 12 bit values 2 registers at a time
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH 2/4] power: supply: axp288_fuel_gauge: Read 15 bit values 2 registers at a time
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH 4/4] power: supply: axp288_fuel_gauge: Drop platform_data dependency
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH 1/4] power: supply: axp288_fuel_gauge: Fix fuel_gauge_reg_readb return on error
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH 5/5] mfd: axp20x: Fix axp288 volatile ranges
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH] iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
From
: Chen-Yu Tsai <wens@xxxxxxxx>
Re: [PATCH 5/5] mfd: axp20x: Fix axp288 volatile ranges
From
: Chen-Yu Tsai <wens@xxxxxxxx>
Re: [PATCH 4/5] mfd: axp20x: Drop wrong AXP288_PMIC_ADC_EN define
From
: Chen-Yu Tsai <wens@xxxxxxxx>
Re: [PATCH 3/5] mfd: axp20x: Fix axp288 PEK_DBR and PEK_DBF irqs being swapped
From
: Chen-Yu Tsai <wens@xxxxxxxx>
Re: [PATCH 2/5] mfd: axp20x: Add missing axp288 irqs
From
: Chen-Yu Tsai <wens@xxxxxxxx>
Re: [[RFC V3] 1/1] i2c: imx: add slave support
From
: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
Re: [PATCH 1/5] mfd: axp20x: Use IRQF_TRIGGER_LOW on the axp288
From
: Chen-Yu Tsai <wens@xxxxxxxx>
[PATCH] iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH 5/5] mfd: axp20x: Fix axp288 volatile ranges
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH 4/5] mfd: axp20x: Drop wrong AXP288_PMIC_ADC_EN define
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH 3/5] mfd: axp20x: Fix axp288 PEK_DBR and PEK_DBF irqs being swapped
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH 2/5] mfd: axp20x: Add missing axp288 irqs
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH 1/5] mfd: axp20x: Use IRQF_TRIGGER_LOW on the axp288
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [[RFC V3] 1/1] i2c: imx: add slave support
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH V5] i2c: designware: fix wrong Tx/Rx FIFO for ACPI
From
: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Re: [PATCH V5] i2c: designware: fix wrong Tx/Rx FIFO for ACPI
From
: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
[PATCH V5] i2c: designware: fix wrong Tx/Rx FIFO for ACPI
From
: Tin Huynh <tnhuynh@xxxxxxx>
Re: [PATCH V4] i2c: designware: fix wrong Tx/Rx FIFO for ACPI
From
: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
[PATCH V1] i2c: xgene: Fix missing code of DTB support
From
: Tin Huynh <tnhuynh@xxxxxxx>
[[RFC V3] 1/1] i2c: imx: add slave support
From
: Joshua Frkuska <joshua_frkuska@xxxxxxxxxx>
[[RFC V3] 0/1] i2c: imx: add slave support
From
: Joshua Frkuska <joshua_frkuska@xxxxxxxxxx>
Re: [PATCH V4] i2c: designware: fix wrong Tx/Rx FIFO for ACPI
From
: Tin Huynh <tnhuynh@xxxxxxx>
Re: [PATCH 3/4] i2c: octeon: thunderx: Limit register access retries
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH] i2c: designware: add reset interface
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH] i2c: designware: Cleaning and comment style fixes.
From
: Joe Perches <joe@xxxxxxxxxxx>
Re: Re: [PATCH] i2c: designware: Cleaning and comment style fixes.
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
Re: [PATCH] i2c: designware: Cleaning and comment style fixes.
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
[PATCH] i2c: designware: Cleaning and comment style fixes.
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
Re: [PATCH v4 5/5] i2c: designware: Cleaning comments and formatation
From
: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
Re: [PATCH v4 3/5] i2c: designware: Add slave definitions
From
: Rob Herring <robh@xxxxxxxxxx>
Re: [PATCH v4 5/5] i2c: designware-baytrail: Add support for cherrytrail
From
: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
Re: [PATCH v4 4/5] i2c: designware-baytrail: Disallow the CPU to enter C6 or C7 while holding the punit semaphore
From
: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
Re: [PATCH V4] i2c: designware: fix wrong Tx/Rx FIFO for ACPI
From
: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
Re: [PATCH v4 4/5] i2c: designware-baytrail: Disallow the CPU to enter C6 or C7 while holding the punit semaphore
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v4 4/5] i2c: designware-baytrail: Disallow the CPU to enter C6 or C7 while holding the punit semaphore
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH V4] i2c: designware: fix wrong Tx/Rx FIFO for ACPI
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
RE: [PATCH v4 3/5] i2c: designware: Add slave definitions
From
: Luis de Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
Re: [PATCH V3] i2c: designware: fix wrong tx/rx fifo for ACPI
From
: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Re: [PATCH v6 5/5] ARM: configs: stm32: Add I2C support for STM32 defconfig
From
: Alexandre Torgue <alexandre.torgue@xxxxxx>
[PATCH V4] i2c: designware: fix wrong Tx/Rx FIFO for ACPI
From
: Tin Huynh <tnhuynh@xxxxxxx>
Re: [PATCH v6 4/5] ARM: dts: stm32: Add I2C1 support for STM32429 eval board
From
: Alexandre Torgue <alexandre.torgue@xxxxxx>
Re: [PATCH v6 3/5] ARM: dts: stm32: Add I2C1 support for STM32F429 SoC
From
: Alexandre Torgue <alexandre.torgue@xxxxxx>
Re: [PATCH v4 4/5] i2c: designware-baytrail: Disallow the CPU to enter C6 or C7 while holding the punit semaphore
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v6 2/5] i2c: Add STM32F4 I2C driver
From
: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Re: [PATCH v4 3/5] i2c: designware: Add slave definitions
From
: Rob Herring <robh@xxxxxxxxxx>
[PATCH v4 5/5] i2c: designware-baytrail: Add support for cherrytrail
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH v4 4/5] i2c: designware-baytrail: Disallow the CPU to enter C6 or C7 while holding the punit semaphore
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH v4 3/5] i2c: designware-baytrail: Only check iosf_mbi_available() for shared hosts
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH v4 2/5] i2c: designware-baytrail: Pass dw_i2c_dev into helper functions
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH v4 1/5] i2c: designware: Rename accessor_flags to flags
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH v3 1/5] i2c: designware: Rename accessor_flags to flags
From
: Takashi Iwai <tiwai@xxxxxxx>
Re: [PATCH v3 4/5] i2c: designware-baytrail: Disallow the CPU to enter C6 or C7 while holding the punit semaphore
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH V3] i2c: designware: fix wrong tx/rx fifo for ACPI
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH V3] i2c: designware: fix wrong tx/rx fifo for ACPI
From
: Joe Perches <joe@xxxxxxxxxxx>
Re: [PATCH V3] i2c: designware: fix wrong tx/rx fifo for ACPI
From
: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Re: [PATCH V3] i2c: designware: fix wrong tx/rx fifo for ACPI
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
RE: [PATCH v4 3/5] i2c: designware: Add slave definitions
From
: Luis de Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
Re: [PATCH v4 3/5] i2c: designware: Add slave definitions
From
: Rob Herring <robh@xxxxxxxxxx>
Re: [PATCH 3/4] i2c: octeon: thunderx: Limit register access retries
From
: Jan Glauber <jan.glauber@xxxxxxxxxxxxxxxxxx>
[PATCH v6 1/5] dt-bindings: Document the STM32 I2C bindings
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v6 2/5] i2c: Add STM32F4 I2C driver
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v6 5/5] ARM: configs: stm32: Add I2C support for STM32 defconfig
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v6 4/5] ARM: dts: stm32: Add I2C1 support for STM32429 eval board
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v6 3/5] ARM: dts: stm32: Add I2C1 support for STM32F429 SoC
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v6 0/5] Add support for the STM32F4 I2C
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
Re: [PATCH v3 3/5] i2c: designware-baytrail: Only check iosf_mbi_available() for shared hosts
From
: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
Re: [PATCH v3 2/5] i2c: designware-baytrail: Pass dw_i2c_dev into helper functions
From
: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
Re: [PATCH v3 1/5] i2c: designware: Rename accessor_flags to flags
From
: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
Re: [PATCH v6 4/9] dt-bindings: iio: iio-mux: document iio-mux bindings
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH v3 5/5] i2c: designware-baytrail: Add support for cherrytrail
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v5 1/2] i2c: aspeed: added driver for Aspeed I2C
From
: Kachalov Anton <mouse@xxxxxxx>
Re: [PATCH v5 1/2] i2c: aspeed: added driver for Aspeed I2C
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH v3 5/5] i2c: designware-baytrail: Add support for cherrytrail
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH v3 4/5] i2c: designware-baytrail: Disallow the CPU to enter C6 or C7 while holding the punit semaphore
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v3 5/5] i2c: designware-baytrail: Add support for cherrytrail
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v3 3/5] i2c: designware-baytrail: Only check iosf_mbi_available() for shared hosts
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
[PATCH V3] i2c: designware: fix wrong tx/rx fifo for ACPI
From
: Tin Huynh <tnhuynh@xxxxxxx>
Re: [PATCH v5 2/5] i2c: Add STM32F4 I2C driver
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
Re: [PATCH v5 1/2] i2c: aspeed: added driver for Aspeed I2C
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH] i2c: core: don't try to OF populate DDC i2c buses
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [Patch V1] i2c: fsl-lpi2c: read lpi2c fifo size in probe()
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH 4/4] i2c: octeon: thunderx: Add I2C_CLASS_HWMON
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH 3/4] i2c: octeon: thunderx: Limit register access retries
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH 2/4] i2c: octeon: thunderx: Remove double-check after interrupt
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH 1/4] i2c: octeon: thunderx: TWSI software reset in recovery
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH] i2c: cadence: Allow Cadence I2C to be selected for Cadence Xtensa CPUs
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH 2/2] i2c: sh_mobile: Add per-Generation fallback bindings
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH v4 i2c/for-next] i2c: rcar: Add per-Generation fallback bindings
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH v5 2/5] i2c: Add STM32F4 I2C driver
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH v4 4/5] i2c: designware: Add slave mode as separated driver
From
: kbuild test robot <lkp@xxxxxxxxx>
[PATCH v3 5/5] i2c: designware-baytrail: Add support for cherrytrail
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH v3 4/5] i2c: designware-baytrail: Disallow the CPU to enter C6 or C7 while holding the punit semaphore
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH v3 3/5] i2c: designware-baytrail: Only check iosf_mbi_available() for shared hosts
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH v3 2/5] i2c: designware-baytrail: Pass dw_i2c_dev into helper functions
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH v3 1/5] i2c: designware: Rename accessor_flags to flags
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH v2 4/5] i2c: designware-baytrail: Force the CPU to C1 state while holding the punit semaphore
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH v2 4/5] i2c: designware-baytrail: Force the CPU to C1 state while holding the punit semaphore
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH v2 3/5] i2c: designware-baytrail: Only check iosf_mbi_available() for shared hosts
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH v6 4/9] dt-bindings: iio: iio-mux: document iio-mux bindings
From
: Jonathan Cameron <jic23@xxxxxxxxxx>
Re: [PATCH v2 5/5] i2c: designware-baytrail: Add support for cherrytrail
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v2 3/5] i2c: designware-baytrail: Only check iosf_mbi_available() for shared hosts
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v2 4/5] i2c: designware-baytrail: Force the CPU to C1 state while holding the punit semaphore
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v2 1/5] i2c: designware: Rename accessor_flags to flags
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
[PATCH v2 5/5] i2c: designware-baytrail: Add support for cherrytrail
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH v2 4/5] i2c: designware-baytrail: Force the CPU to C1 state while holding the punit semaphore
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH v2 3/5] i2c: designware-baytrail: Only check iosf_mbi_available() for shared hosts
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH v2 2/5] i2c: designware-baytrail: Pass dw_i2c_dev into helper functions
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH v2 1/5] i2c: designware: Rename accessor_flags to flags
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH 2/2] i2c: designware-baytrail: Add support for cherrytrail
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH 2/2] i2c: designware-baytrail: Add support for cherrytrail
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH 1/2] i2c: designware-baytrail: Pass dw_i2c_dev into helper functions
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
[PATCH 1/2] i2c: designware-baytrail: Pass dw_i2c_dev into helper functions
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH 2/2] i2c: designware-baytrail: Add support for cherrytrail
From
: Hans de Goede <hdegoede@xxxxxxxxxx>
[PATCH 4/4] i2c: octeon: thunderx: Add I2C_CLASS_HWMON
From
: Jan Glauber <jglauber@xxxxxxxxxx>
[PATCH 3/4] i2c: octeon: thunderx: Limit register access retries
From
: Jan Glauber <jglauber@xxxxxxxxxx>
[PATCH 2/4] i2c: octeon: thunderx: Remove double-check after interrupt
From
: Jan Glauber <jglauber@xxxxxxxxxx>
[PATCH 1/4] i2c: octeon: thunderx: TWSI software reset in recovery
From
: Jan Glauber <jglauber@xxxxxxxxxx>
[PATCH 0/4] i2c octeon & thunderx bug fixes
From
: Jan Glauber <jglauber@xxxxxxxxxx>
Re: [PATCH] misc: eeprom: implement compatible DT probing
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH] misc: eeprom: implement compatible DT probing
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH] misc: eeprom: implement compatible DT probing
From
: Linus Walleij <linus.walleij@xxxxxxxxxx>
Re: [PATCH] misc: eeprom: implement compatible DT probing
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH] misc: eeprom: implement compatible DT probing
From
: Linus Walleij <linus.walleij@xxxxxxxxxx>
Re: [PATCH] i2c: rk3x: keep i2c irq ON in suspend
From
: "David.Wu" <david.wu@xxxxxxxxxxxxxx>
Re: [PATCH v5 2/5] i2c: Add STM32F4 I2C driver
From
: kbuild test robot <lkp@xxxxxxxxx>
Re: [PATCH v5 2/5] i2c: Add STM32F4 I2C driver
From
: kbuild test robot <lkp@xxxxxxxxx>
Re: [PATCH v5 2/5] i2c: Add STM32F4 I2C driver
From
: kbuild test robot <lkp@xxxxxxxxx>
[PATCH] i2c: cadence: Allow Cadence I2C to be selected for Cadence Xtensa CPUs
From
: Jan Kotas <jank@xxxxxxxxxxx>
Re: [PATCH v5 4/5] ARM: dts: Add I2C1 support for STM32429 eval board
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
Re: [PATCH v5 5/5] ARM: configs: Add I2C support for STM32 defconfig
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
Re: [PATCH v5 4/5] ARM: dts: Add I2C1 support for STM32429 eval board
From
: Alexandre Torgue <alexandre.torgue@xxxxxx>
Re: [PATCH v5 5/5] ARM: configs: Add I2C support for STM32 defconfig
From
: Alexandre Torgue <alexandre.torgue@xxxxxx>
[PATCH v5 0/5] Add support for the STM32F4 I2C
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v5 1/5] dt-bindings: Document the STM32 I2C bindings
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v5 3/5] ARM: dts: Add I2C1 support for STM32F429 SoC
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v5 4/5] ARM: dts: Add I2C1 support for STM32429 eval board
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v5 5/5] ARM: configs: Add I2C support for STM32 defconfig
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v5 2/5] i2c: Add STM32F4 I2C driver
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
Re: [PATCH v4 4/5] i2c: designware: Add slave mode as separated driver
From
: kbuild test robot <lkp@xxxxxxxxx>
Re: [PATCH v4 5/5] i2c: designware: Cleaning comments and formatation
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v4 4/5] i2c: designware: Add slave mode as separated driver
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v4 3/5] i2c: designware: Add slave definitions
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v4 4/5] i2c: designware: Add slave mode as separated driver
From
: Mark Rutland <mark.rutland@xxxxxxx>
Re: [PATCH v4 2/5] i2c: designware: Master mode as separated driver
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v4 1/5] i2c: designware: Refactoring of the i2c-designware
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
[PATCH v4 1/5] i2c: designware: Refactoring of the i2c-designware
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
[PATCH v4 2/5] i2c: designware: Master mode as separated driver
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
[PATCH v4 3/5] i2c: designware: Add slave definitions
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
[PATCH v4 4/5] i2c: designware: Add slave mode as separated driver
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
[PATCH v4 5/5] i2c: designware: Cleaning comments and formatation
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
[PATCH v4 0/5] i2c: designware: Add slave support
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
[PATCH v4 4/5] ARM: dts: Add I2C1 support for STM32429 eval board
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v4 1/5] dt-bindings: Document the STM32 I2C bindings
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v4 3/5] ARM: dts: Add I2C1 support for STM32F429 SoC
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v4 5/5] ARM: configs: Add I2C support for STM32 defconfig
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v4 2/5] i2c: Add STM32F4 I2C driver
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v4 0/5] Add support for the STM32F4 I2C
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
Re: [PATCH] i2c: rk3x: keep i2c irq ON in suspend
From
: Grygorii Strashko <grygorii.strashko@xxxxxx>
Re: [PATCH V1] rtc: ds1307: Add ACPI support
From
: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
Re: [PATCH 2/2] i2c: sh_mobile: Add per-Generation fallback bindings
From
: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Re: [PATCH 1/2] i2c: sh_mobile: List rmobile fallback compatibility last
From
: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
[PATCH 2/2] i2c: sh_mobile: Add per-Generation fallback bindings
From
: Simon Horman <horms+renesas@xxxxxxxxxxxx>
[PATCH 1/2] i2c: sh_mobile: List rmobile fallback compatibility last
From
: Simon Horman <horms+renesas@xxxxxxxxxxxx>
[PATCH 0/2] i2c: sh_mobile: fallback enhancements
From
: Simon Horman <horms+renesas@xxxxxxxxxxxx>
Re: [PATCH V2] i2c: designware: fix wrong tx/rx fifo for ACPI
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH] i2c: rk3x: keep i2c irq ON in suspend
From
: "David.Wu" <david.wu@xxxxxxxxxxxxxx>
Re: [Patch V1] i2c: fsl-lpi2c: read lpi2c fifo size in probe()
From
: Vladimir Zapolskiy <vz@xxxxxxxxx>
Re: [PATCH v5 1/2] i2c: aspeed: added driver for Aspeed I2C
From
: Vladimir Zapolskiy <vz@xxxxxxxxx>
Re: [PATCH v5 2/2] i2c: aspeed: added documentation for Aspeed I2C driver
From
: Vladimir Zapolskiy <vz@xxxxxxxxx>
Re: [PATCH v6 4/9] dt-bindings: iio: iio-mux: document iio-mux bindings
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [RFC v2 2/2] i2c: Pass i2c_device_id to probe func when using DT ids through ACPI
From
: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Re: [PATCH] i2c: rk3x: keep i2c irq ON in suspend
From
: Doug Anderson <dianders@xxxxxxxxxxxx>
[PATCH v4 i2c/for-next] i2c: rcar: Add per-Generation fallback bindings
From
: Simon Horman <horms+renesas@xxxxxxxxxxxx>
Re: [PATCH] i2c: rk3x: keep i2c irq ON in suspend
From
: "David.Wu" <david.wu@xxxxxxxxxxxxxx>
[PATCH V2] i2c: designware: fix wrong tx/rx fifo for ACPI
From
: Tin Huynh <tnhuynh@xxxxxxx>
Re: [PATCH v6 4/9] dt-bindings: iio: iio-mux: document iio-mux bindings
From
: Rob Herring <robh@xxxxxxxxxx>
Re: [PATCH v5 2/2] i2c: aspeed: added documentation for Aspeed I2C driver
From
: Rob Herring <robh@xxxxxxxxxx>
Re: [PATCH 09/39] Annotate hardware config module parameters in drivers/i2c/
From
: One Thousand Gnomes <gnomes@xxxxxxxxxxxxxxxxxxx>
Re: [PATCH] i2c: rk3x: keep i2c irq ON in suspend
From
: Heiko Stuebner <heiko@xxxxxxxxx>
[PATCH] i2c: rk3x: keep i2c irq ON in suspend
From
: David Wu <david.wu@xxxxxxxxxxxxxx>
Re: [PATCH V1] rtc: ds1307: Add ACPI support
From
: Tin Huynh <tnhuynh@xxxxxxx>
Re: [PATCH v3 0/7] mux controller abstraction and iio/i2c muxes
From
: Jonathan Cameron <jic23@xxxxxxxxxx>
Re: [PATCH v4 i2c/for-next] i2c: rcar: Add per-Generation fallback bindings
From
: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
[PATCH v4 i2c/for-next] i2c: rcar: Add per-Generation fallback bindings
From
: Simon Horman <horms+renesas@xxxxxxxxxxxx>
[PULL REQUEST] i2c for 4.9
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
[wsa:renesas/thermal-on-4.10-next 2/4] rcar_gen3_thermal.c:undefined reference to `__divdi3'
From
: kbuild test robot <fengguang.wu@xxxxxxxxx>
Re: [PATCH v3 i2c/for-next] i2c: rcar: Add per-Generation fallback bindings
From
: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
[PATCH v3 i2c/for-next] i2c: rcar: Add per-Generation fallback bindings
From
: Simon Horman <horms+renesas@xxxxxxxxxxxx>
[Patch V1] i2c: fsl-lpi2c: read lpi2c fifo size in probe()
From
: Gao Pan <pandy.gao@xxxxxxx>
[wsa:renesas/thermal-on-4.10-next 4/4] ERROR: "__divdi3" [drivers/thermal/rcar_gen3_thermal.ko] undefined!
From
: kbuild test robot <fengguang.wu@xxxxxxxxx>
Re: [Patch V6 2/2] i2c: imx: add low power i2c bus driver
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [Patch V6 1/2] i2c: imx: add devicetree binding for lpi2c
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v2 1/1] i2c: designware-pcidrv: Add 10bit address feature to medfield/merrifield
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v7 4/4] dt-bindings: i2c: pxa: Update the documentation for the Armada 3700
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v7 3/4] arm64: dts: marvell: Add I2C definitions for the Armada 3700
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v7 2/4] i2c: pxa: Add support for the I2C units found in Armada 3700
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v7 1/4] i2c: pxa: Add definition of fast and high speed modes via the regs layout
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH/RFC v2 i2c/for-next] i2c: rcar: Add per-Generation fallback bindings
From
: Simon Horman <horms@xxxxxxxxxxxx>
Re: [PATCH 09/39] Annotate hardware config module parameters in drivers/i2c/
From
: Jean Delvare <jdelvare@xxxxxxx>
Re: [PATCH/RFC v2 i2c/for-next] i2c: rcar: Add per-Generation fallback bindings
From
: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
[PATCH/RFC v2 i2c/for-next] i2c: rcar: Add per-Generation fallback bindings
From
: Simon Horman <horms+renesas@xxxxxxxxxxxx>
Re: [PATCH/RFC i2c/for-next] i2c: rcar: Add per-Generation fallback bindings
From
: Simon Horman <horms@xxxxxxxxxxxx>
Re: [PATCH/RFC i2c/for-next] i2c: rcar: Add per-Generation fallback bindings
From
: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
[PATCH/RFC i2c/for-next] i2c: rcar: Add per-Generation fallback bindings
From
: Simon Horman <horms+renesas@xxxxxxxxxxxx>
Re: [PATCH 09/39] Annotate hardware config module parameters in drivers/i2c/
From
: David Howells <dhowells@xxxxxxxxxx>
Re: [PATCH 09/39] Annotate hardware config module parameters in drivers/i2c/
From
: Jean Delvare <jdelvare@xxxxxxx>
[PATCH 09/39] Annotate hardware config module parameters in drivers/i2c/
From
: David Howells <dhowells@xxxxxxxxxx>
Re: [PATCH] i2c: core: don't try to OF populate DDC i2c buses
From
: Vladimir Zapolskiy <vz@xxxxxxxxx>
[PATCH v7 4/4] dt-bindings: i2c: pxa: Update the documentation for the Armada 3700
From
: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
[PATCH v7 2/4] i2c: pxa: Add support for the I2C units found in Armada 3700
From
: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
[PATCH v7 3/4] arm64: dts: marvell: Add I2C definitions for the Armada 3700
From
: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
[PATCH v7 1/4] i2c: pxa: Add definition of fast and high speed modes via the regs layout
From
: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
[PATCH v7 0/4] Add basic support for the I2C units of the Armada 3700
From
: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
Re: [PATCH] i2c: core: don't try to OF populate DDC i2c buses
From
: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Re: [PATCH] i2c: imx: add slave support. v2 status
From
: "Frkuska, Joshua" <joshua_frkuska@xxxxxxxxxx>
Re: [PATCH v2 1/1] i2c: designware-pcidrv: Add 10bit address feature to medfield/merrifield
From
: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
Re: [PATCH] i2c: core: don't try to OF populate DDC i2c buses
From
: Vladimir Zapolskiy <vz@xxxxxxxxx>
Re: [PATCH v3 2/5] i2c: Add STM32F4 I2C driver
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v2 1/1] i2c: designware-pcidrv: Add 10bit address feature to medfield/merrifield
From
: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v3 2/5] i2c: Add STM32F4 I2C driver
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v5 1/3] i2c: pxa: Add support for the I2C units found in Armada 3700
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 1/1] i2c: designware-pcidrv: Add 10bit address feature to medfield/merrifield
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v6 1/4] i2c: pxa: Add definition of fast and high speed modes via the regs layout
From
: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
Re: [PATCH v6 2/4] i2c: pxa: Add support for the I2C units found in Armada 3700
From
: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
[PATCH 1/1] i2c: designware-pcidrv: Add 10bit address feature to medfield/merrifield
From
: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxxxxxxxx>
[PATCH v6 2/9] misc: minimal mux subsystem and gpio-based mux controller
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH] i2c: core: don't try to OF populate DDC i2c buses
From
: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
[PATCH v6 0/4] Add basic support for the I2C units of the Armada 3700
From
: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
[PATCH v6 4/4] dt-bindings: i2c: pxa: Update the documentation for the Armada 3700
From
: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
[PATCH v6 3/4] arm64: dts: marvell: Add I2C definitions for the Armada 3700
From
: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
[PATCH v6 2/4] i2c: pxa: Add support for the I2C units found in Armada 3700
From
: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
[PATCH v6 1/4] i2c: pxa: Add definition of fast and high speed modes via the regs layout
From
: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
Re: [PATCH] i2c: core: don't try to OF populate DDC i2c buses
From
: Vladimir Zapolskiy <vz@xxxxxxxxx>
Re: [PATCH] i2c: core: don't try to OF populate DDC i2c buses
From
: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
[PATCH] i2c: core: don't try to OF populate DDC i2c buses
From
: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
[PATCH v6 4/9] dt-bindings: iio: iio-mux: document iio-mux bindings
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH v5 1/3] i2c: pxa: Add support for the I2C units found in Armada 3700
From
: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
Re: [PATCH v6 4/9] dt-bindings: iio: iio-mux: document iio-mux bindings
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH v3 2/5] i2c: Add STM32F4 I2C driver
From
: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
[PATCH v6 3/9] iio: inkern: api for manipulating ext_info of iio channels
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v6 5/9] iio: multiplexer: new iio category and iio-mux driver
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v6 1/9] dt-bindings: document devicetree bindings for mux-controllers and mux-gpio
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH v6 4/9] dt-bindings: iio: iio-mux: document iio-mux bindings
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v6 6/9] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v6 0/9] mux controller abstraction and iio/i2c muxes
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v6 9/9] misc: mux-adg792a: add mux controller driver for ADG792A/G
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v6 8/9] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v6 7/9] i2c: i2c-mux-simple: new driver
From
: Peter Rosin <peda@xxxxxxxxxx>
RE: [Patch V5 2/2] i2c: imx: add low power i2c bus driver
From
: Pandy Gao <pandy.gao@xxxxxxx>
[Patch V6 1/2] i2c: imx: add devicetree binding for lpi2c
From
: Gao Pan <pandy.gao@xxxxxxx>
[PATCH V1] rtc: ds1307: Add ACPI support
From
: Tin Huynh <tnhuynh@xxxxxxx>
[Patch V6 2/2] i2c: imx: add low power i2c bus driver
From
: Gao Pan <pandy.gao@xxxxxxx>
[PATCH v5 2/2] i2c: aspeed: added documentation for Aspeed I2C driver
From
: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
[PATCH v5 1/2] i2c: aspeed: added driver for Aspeed I2C
From
: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
[PATCH v5 0/2] i2c: aspeed: added driver for Aspeed I2C
From
: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
Re: [PATCH v4 1/2] i2c: aspeed: added driver for Aspeed I2C
From
: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
Re: [v6,1/2] i2c: qup: add ACPI support
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [v6,2/2] i2c: qup: support SMBus block read
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [Patch V5 2/2] i2c: imx: add low power i2c bus driver
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v5 1/3] i2c: pxa: Add support for the I2C units found in Armada 3700
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v2 0/3] i2c: octeon: thunder: Fix i2c not working on Octeon
From
: "Steven J. Hill" <Steven.Hill@xxxxxxxxxx>
Re: [PATCH 1/1] i2c: designware: Consolidate default functionality bits
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v3] i2c: i2c-mux-gpio: update mux with gpiod_set_array_value_cansleep
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v2 0/3] i2c: octeon: thunder: Fix i2c not working on Octeon
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH V5] i2c: mux: pca954x: Add ACPI support for pca954x
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v2 0/3] i2c: octeon: thunder: Fix i2c not working on Octeon
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v2 0/3] i2c: octeon: thunder: Fix i2c not working on Octeon
From
: "Steven J. Hill" <Steven.Hill@xxxxxxxxxx>
RE: [Patch V5 2/2] i2c: imx: add low power i2c bus driver
From
: Pandy Gao <pandy.gao@xxxxxxx>
Re: [PATCH V5] i2c: mux: pca954x: Add ACPI support for pca954x
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH v3 0/7] mux controller abstraction and iio/i2c muxes
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH v5 4/9] dt-bindings: iio: iio-mux: document iio-mux bindings
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH V5] i2c: mux: pca954x: Add ACPI support for pca954x
From
: Tin Huynh <tnhuynh@xxxxxxx>
[PATCH v5 7/9] i2c: i2c-mux-simple: new driver
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v5 5/9] iio: multiplexer: new iio category and iio-mux driver
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v5 2/9] misc: minimal mux subsystem and gpio-based mux controller
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v5 0/9] mux controller abstraction and iio/i2c muxes
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v5 6/9] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v5 8/9] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v5 1/9] dt-bindings: document devicetree bindings for mux-controllers and mux-gpio
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH V5] i2c: mux: pca954x: Add ACPI support for pca954x
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH V5] i2c: mux: pca954x: Add ACPI support for pca954x
From
: Tin Huynh <tnhuynh@xxxxxxx>
[PATCH v5 9/9] misc: mux-adg792a: add mux controller driver for ADG792A/G
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v5 4/9] dt-bindings: iio: iio-mux: document iio-mux bindings
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v5 3/9] iio: inkern: api for manipulating ext_info of iio channels
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH V1] i2c: designware: fix wrong tx/rx fifo for ACPI
From
: Tin Huynh <tnhuynh@xxxxxxx>
Re: [PATCH V1] i2c: designware: fix wrong tx/rx fifo for ACPI
From
: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Re: [PATCH v2 0/3] i2c: octeon: thunder: Fix i2c not working on Octeon
From
: Jan Glauber <jan.glauber@xxxxxxxxxxxxxxxxxx>
Re: [PATCH V1] i2c: designware: fix wrong tx/rx fifo for ACPI
From
: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Re: [PATCH V3] i2c: mux: pca954x: Add ACPI support for pca954x
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH V4] i2c: mux: pca954x: Add ACPI support for pca954x
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH V4] i2c: mux: pca954x: Add ACPI support for pca954x
From
: Tin Huynh <tnhuynh@xxxxxxx>
[PATCH V3] i2c: mux: pca954x: Add ACPI support for pca954x
From
: tnhuynh@xxxxxxx
[PATCH V1] i2c: designware: fix wrong tx/rx fifo for ACPI
From
: Tin Huynh <tnhuynh@xxxxxxx>
4.9-rc7: WARNING in driver_probe_device (i2c-amd756?)
From
: Meelis Roos <mroos@xxxxxxxx>
Re: [PATCH v2 0/3] i2c: octeon: thunder: Fix i2c not working on Octeon
From
: "Steven J. Hill" <Steven.Hill@xxxxxxxxxx>
Re: [PATCH v2 0/3] i2c: octeon: thunder: Fix i2c not working on Octeon
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v3 0/7] mux controller abstraction and iio/i2c muxes
From
: Jonathan Cameron <jic23@xxxxxxxxxx>
Re: [RFC PATCH v2 5/7] iio: multiplexer: new iio category and iio-mux driver
From
: Jonathan Cameron <jic23@xxxxxxxxxx>
Re: [PATCH v4 1/2] i2c: aspeed: added driver for Aspeed I2C
From
: Vladimir Zapolskiy <vz@xxxxxxxxx>
[PULL REQUEST] i2c for 4.9
From
: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH v4 0/7] mux controller abstraction and iio/i2c muxes
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH] Revert "i2c: designware: do not disable adapter after transfer"
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: Getting at gpio- and pinctrl-devices as a consumer
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH] Revert "i2c: designware: do not disable adapter after transfer"
From
: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
Re: Getting at gpio- and pinctrl-devices as a consumer
From
: Linus Walleij <linus.walleij@xxxxxxxxxx>
Re: Getting at gpio- and pinctrl-devices as a consumer
From
: Peter Rosin <peda@xxxxxxxxxx>
Getting at gpio- and pinctrl-devices as a consumer
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: Getting at gpio- and pinctrl-devices as a consumer
From
: Linus Walleij <linus.walleij@xxxxxxxxxx>
[PATCH v3] i2c: i2c-mux-gpio: update mux with gpiod_set_array_value_cansleep
From
: Peter Rosin <peda@xxxxxxxxxx>
RE: [patch v9 1/1] i2c: add master driver for mellanox systems
From
: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
Re: [PATCH v2] i2c: i2c-mux-gpio: update mux with gpiod_set_array_value_cansleep
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
[PATCH v4 7/7] i2c: i2c-mux-simple: new driver
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v4 1/7] dt-bindings: document devicetree bindings for mux-controllers and mux-gpio
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v4 0/7] mux controller abstraction and iio/i2c muxes
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v4 2/7] misc: minimal mux subsystem and gpio-based mux controller
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH] Add IDT 89HPESx EEPROM/CSR driver
From
: Serge Semin <fancer.lancer@xxxxxxxxx>
Re: [PATCH v2] i2c: i2c-mux-gpio: update mux with gpiod_set_array_value_cansleep
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v4 6/7] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v4 5/7] iio: multiplexer: new iio category and iio-mux driver
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v4 3/7] iio: inkern: api for manipulating ext_info of iio channels
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v4 4/7] dt-bindings: iio: iio-mux: document iio-mux bindings
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH v2] i2c: i2c-mux-gpio: update mux with gpiod_set_array_value_cansleep
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 2/2] i2c: designware: fix rx fifo depth tracking
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 1/2] i2c: designware: report short transfers
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v5 6/6] i2c: use an IRQ to report Host Notify events, not alert
From
: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
Re: [PATCH v5 6/6] i2c: use an IRQ to report Host Notify events, not alert
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [patch v9 1/1] i2c: add master driver for mellanox systems
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
i2c /i801_smbus bug/issue
From
: Piotr Kasprzak <piotr.kasprzak@xxxxxxxxxx>
Re: [PATCH V2] i2c: mux: pca954x: Add ACPI support for pca954x
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH v4 1/2] i2c: aspeed: added driver for Aspeed I2C
From
: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
Re: [PATCH v4 1/2] i2c: aspeed: added driver for Aspeed I2C
From
: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
Re: [PATCH v3 0/7] mux controller abstraction and iio/i2c muxes
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH 1/1] i2c: designware: Consolidate default functionality bits
From
: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v3 3/5] i2c: designware: Add slave definitions
From
: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
Re: [PATCH 1/1] i2c: designware: Consolidate default functionality bits
From
: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
Re: [PATCH 2/2] i2c: designware: fix rx fifo depth tracking
From
: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
Re: [PATCH 1/2] i2c: designware: report short transfers
From
: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
[PATCH v2] i2c: i2c-mux-gpio: update mux with gpiod_set_array_value_cansleep
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH V2] i2c: mux: pca954x: Add ACPI support for pca954x
From
: tnhuynh@xxxxxxx
Re: [PATCH v3 0/7] mux controller abstraction and iio/i2c muxes
From
: Lars-Peter Clausen <lars@xxxxxxxxxx>
[PATCH] i2c: i2c-mux-gpio: update mux with gpiod_set_array_value_cansleep
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [PATCH v4 1/2] i2c: aspeed: added driver for Aspeed I2C
From
: Kachalov Anton <mouse@xxxxxxx>
Re: [PATCH v2 0/3] i2c: octeon: thunder: Fix i2c not working on Octeon
From
: Jan Glauber <jan.glauber@xxxxxxxxxxxxxxxxxx>
Re: [PATCH v2 0/3] i2c: octeon: thunder: Fix i2c not working on Octeon
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v5 6/6] i2c: use an IRQ to report Host Notify events, not alert
From
: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v4 1/2] i2c: aspeed: added driver for Aspeed I2C
From
: Cédric Le Goater <clg@xxxxxxxx>
[PATCH] i2c: designware: add reset interface
From
: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx>
[Patch V5 1/2] i2c: imx: add devicetree binding for lpi2c
From
: Gao Pan <pandy.gao@xxxxxxx>
Re: [RFC PATCH v2 2/7] misc: minimal mux subsystem and gpio-based mux controller
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [RFC PATCH v2 3/7] iio: inkern: api for manipulating ext_info of iio channels
From
: Peter Rosin <peda@xxxxxxxxxx>
Re: [RFC PATCH v2 3/7] iio: inkern: api for manipulating ext_info of iio channels
From
: Lars-Peter Clausen <lars@xxxxxxxxxx>
Re: [PATCH v3 5/7] iio: multiplexer: new iio category and iio-mux driver
From
: kbuild test robot <lkp@xxxxxxxxx>
[PATCH v3 2/7] misc: minimal mux subsystem and gpio-based mux controller
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v3 1/7] dt-bindings: document devicetree bindings for mux-controllers and mux-gpio
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v5 0/3] Add basic support for the I2C units of the Armada 3700
From
: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
[PATCH v5 3/3] dt-bindings: i2c: pxa: Update the documentation for the Armada 3700
From
: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
[PATCH v3 5/7] iio: multiplexer: new iio category and iio-mux driver
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v3 6/7] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v3 7/7] i2c: i2c-mux-simple: new driver
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v3 4/7] dt-bindings: iio: iio-mux: document iio-mux bindings
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v5 1/3] i2c: pxa: Add support for the I2C units found in Armada 3700
From
: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
[PATCH v5 2/3] arm64: dts: marvell: Add I2C definitions for the Armada 3700
From
: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
[PATCH v3 0/7] mux controller abstraction and iio/i2c muxes
From
: Peter Rosin <peda@xxxxxxxxxx>
[PATCH v3 3/7] iio: inkern: api for manipulating ext_info of iio channels
From
: Peter Rosin <peda@xxxxxxxxxx>
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Scanner]
[Linux SCSI]
[Samba]
[Yosemite News]