The clock divider has 12 bits, splitted into a 10 bit field and a 2 bit field. The extra 2 bits aren't used currently. Change this to use the full 12 bits and warn if the requested frequency is too low. Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx> Acked-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx> --- v2: - added Acked-by --- drivers/i2c/busses/i2c-meson.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c index 5e243efa..a5764be5 100644 --- a/drivers/i2c/busses/i2c-meson.c +++ b/drivers/i2c/busses/i2c-meson.c @@ -35,7 +35,9 @@ #define REG_CTRL_STATUS BIT(2) #define REG_CTRL_ERROR BIT(3) #define REG_CTRL_CLKDIV_SHIFT 12 -#define REG_CTRL_CLKDIV_MASK ((BIT(10) - 1) << REG_CTRL_CLKDIV_SHIFT) +#define REG_CTRL_CLKDIV_MASK GENMASK(21, 12) +#define REG_CTRL_CLKDIVEXT_SHIFT 28 +#define REG_CTRL_CLKDIVEXT_MASK GENMASK(29, 28) #define I2C_TIMEOUT_MS 500 @@ -136,8 +138,15 @@ static void meson_i2c_set_clk_div(struct meson_i2c *i2c) unsigned int div; div = DIV_ROUND_UP(clk_rate, i2c->timings.bus_freq_hz * 4); + + /* clock divider has 12 bits */ + WARN_ON(div >= (1 << 12)); + meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIV_MASK, - div << REG_CTRL_CLKDIV_SHIFT); + (div & GENMASK(9, 0)) << REG_CTRL_CLKDIV_SHIFT); + + meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIVEXT_MASK, + (div >> 10) << REG_CTRL_CLKDIVEXT_SHIFT); dev_dbg(i2c->dev, "%s: clk %lu, freq %u, div %u\n", __func__, clk_rate, i2c->timings.bus_freq_hz, div); -- 2.12.0 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
