On 08.03.2017 21:05, Javier Martinez Canillas wrote:
> Hello Andrzej,
>
> On 02/22/2017 08:04 AM, Andrzej Hajda wrote:
>> In case of arbitration lost adequate interrupt sometimes is not signaled.
>> As a result transfer timeouts and is not retried, as it should. To avoid
>> such cases code is added to check transaction status in case of every
>> interrupt.
>>
>> Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
>> ---
> This patch causes regressions on Exynos5 boards (at least I noticed it in
> Exynos5800 Peach Pi board). I see transmission timeouts when accessing I2C
> device registers, i.e:
>
> $ cat /sys/class/rtc/rtc0/time
> [ 25.924594] exynos5-hsi2c 12e10000.i2c: rx timeout
> [ 65.028365] max77686-rtc max77802-rtc: Fail to read time reg(-22)
> cat: /sys/class/rtc/rtc0/time: Invalid argument
Hmm, at 12e10000 Exynos5 has hsi2c_9, and on this bus I have found only
infineon,slb9645tt TPM module. At least on mainline kernel.
What kernel do you use? Any additional changes to kernel?
Do you observe it on mainline kernel?
Regarding the issue, how often it happens?
Please verify that this is not just coincidence.
>
> Doing a partial revert of $SUBJECT (reading I2C_TRANS_STATUS register when
> it was before) "fixes" the problem [0].
That look crazy, the only difference for non-Exynos7 variant (which is
in Exynos5 boards) is that with your change HSI2C_TRANS_STATUS is read
only when HSI2C_INT_I2C happens, am I right?
Anyway I have realized that in case of Exynos5 the device HSI2C driver
works with is named "Universal Serial Interface" and has slightly
different set of registers than HSI2C device present in Exynos52[56]0,
but I do not know if it matters.
If [0] really fixes the issue I think you can create real patch and send
for testing, but it looks very suspicious.
Regards
Andrzej
>
> I've read the Exynos5800 and Exynos5433 SoC manuals and couldn't figure out
> what's causing it. I first thought that the solution was to make I2C core
> to retry when the TRANSFER_DONE_AUTO field isn't set [1] but that only makes
> the issue less frequent, it still fails. I also tried to increment the retry
> count [2] but it also didn't help.
>
> Any ideas about what could be happening here?
>
> [0]:
> diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
> index cbd93ce0661f..736a82472101 100644
> --- a/drivers/i2c/busses/i2c-exynos5.c
> +++ b/drivers/i2c/busses/i2c-exynos5.c
> @@ -457,7 +457,6 @@ static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id)
>
> int_status = readl(i2c->regs + HSI2C_INT_STATUS);
> writel(int_status, i2c->regs + HSI2C_INT_STATUS);
> - trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS);
>
> /* handle interrupt related to the transfer status */
> if (i2c->variant->hw == HSI2C_EXYNOS7) {
> @@ -482,11 +481,13 @@ static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id)
> goto stop;
> }
>
> + trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS);
> if ((trans_status & HSI2C_MASTER_ST_MASK) == HSI2C_MASTER_ST_LOSE) {
> i2c->state = -EAGAIN;
> goto stop;
> }
> } else if (int_status & HSI2C_INT_I2C) {
> + trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS);
> if (trans_status & HSI2C_NO_DEV_ACK) {
> dev_dbg(i2c->dev, "No ACK from device\n");
> i2c->state = -ENXIO;
>
> [1]:
> >From 3c60d3a0356563b33b739d309a4f64c003d83053 Mon Sep 17 00:00:00 2001
> From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
> Date: Mon, 6 Mar 2017 19:35:44 -0300
> Subject: [PATCH] i2c: exynos5: Make transaction to retry if isn't successfully completed
>
> After commit 7999eecb7e56 ("i2c: exynos5: fix arbitration lost handling"),
> some I2C transactions are failing because the TRANSFER_DONE_AUTO field is
> not set in the I2C_TRANS_STATUS register so the i2c->status value is left
> to -EINVAL causing the i2c->msg_complete completion to never be signaled.
>
> For example, when reading the time of an I2C rtc on an Exynos5800 machine:
>
> $ cat /sys/class/rtc/rtc0/time
> [ 25.924594] exynos5-hsi2c 12e10000.i2c: rx timeout
> [ 65.028365] max77686-rtc max77802-rtc: Fail to read time reg(-22)
> cat: /sys/class/rtc/rtc0/time: Invalid argument
>
> To avoid this, set i2c->state to -EAGAIN if TRANSFER_DONE_AUTO is not set to
> allow the I2C core to retry if the transaction wasn't successfully completed.
>
> Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
> ---
> drivers/i2c/busses/i2c-exynos5.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
> index cbd93ce0661f..d294fb61520c 100644
> --- a/drivers/i2c/busses/i2c-exynos5.c
> +++ b/drivers/i2c/busses/i2c-exynos5.c
> @@ -506,6 +506,10 @@ static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id)
> } else if (trans_status & HSI2C_TRANS_DONE) {
> i2c->trans_done = 1;
> i2c->state = 0;
> + } else {
> + dev_dbg(i2c->dev, "Transaction was not completed\n");
> + i2c->state = -EAGAIN;
> + goto stop;
> }
> }
>
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
