Linux GPIO
[Prev Page][Next Page]
- [PATCH] gpio: exar set value handling for hw with gpio pull-up or pull-down,
Sai Kumar Cholleti
- [PATCH v11 00/12] Initial Marvell PXA1908 support,
Duje Mihanović via B4 Relay
- [PATCH v11 02/12] dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible, Duje Mihanović via B4 Relay
- [PATCH v11 01/12] clk: mmp: Switch to use struct u32_fract instead of custom one, Duje Mihanović via B4 Relay
- [PATCH v11 04/12] dt-bindings: clock: Add Marvell PXA1908 clock bindings, Duje Mihanović via B4 Relay
- [PATCH v11 03/12] pinctrl: single: add marvell,pxa1908-padconf compatible, Duje Mihanović via B4 Relay
- [PATCH v11 05/12] clk: mmp: Add Marvell PXA1908 APBC driver, Duje Mihanović via B4 Relay
- [PATCH v11 09/12] dt-bindings: marvell: Document PXA1908 SoC, Duje Mihanović via B4 Relay
- [PATCH v11 07/12] clk: mmp: Add Marvell PXA1908 APMU driver, Duje Mihanović via B4 Relay
- [PATCH v11 06/12] clk: mmp: Add Marvell PXA1908 APBCP driver, Duje Mihanović via B4 Relay
- [PATCH v11 08/12] clk: mmp: Add Marvell PXA1908 MPMU driver, Duje Mihanović via B4 Relay
- [PATCH v11 11/12] arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte, Duje Mihanović via B4 Relay
- [PATCH v11 10/12] arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform, Duje Mihanović via B4 Relay
- [PATCH v11 12/12] MAINTAINERS: add myself as Marvell PXA1908 maintainer, Duje Mihanović via B4 Relay
- Re: [PATCH v11 00/12] Initial Marvell PXA1908 support, Rob Herring (Arm)
- [PATCH v2 0/3] pinctrl: pinctrl-zynqmp: Add Versal platform support,
Sai Krishna Potthuri
- [brgl:gpio/for-next] BUILD SUCCESS c206d6be8605e9b564ef99a7fd7dcc406e3bda63, kernel test robot
- [PATCH v4] pinctrl: samsung: Add support for pull-up and pull-down,
Vishnu Reddy
- [PATCH libgpiod v2 0/4] Fix issues detected by static analyzer,
Iker Pedrosa
- [PATCH 0/5] Initial preparations for MT6765,
Arseniy Velikanov
- [PATCH] pinctrl: meteorlake: Add Arrow Lake-H/U ACPI ID,
Mika Westerberg
- [PATCH v3 0/7] riscv: sophgo: Add pinctrl support for CV1800 series SoC,
Inochi Amaoto
- [PATCH] pinctrl: renesas: rzg2l: Use dev_err_probe(),
Biju Das
- [PATCH AUTOSEL 6.6 2/9] gpio: prevent potential speculation leaks in gpio_device_get_desc(), Sasha Levin
- [PATCH AUTOSEL 6.10 03/16] gpio: prevent potential speculation leaks in gpio_device_get_desc(), Sasha Levin
- [GIT PULL] gpio fixes for v6.11-rc1,
Bartosz Golaszewski
- [PATCH] dt-bindings: gpio: nxp,lpc3220-gpio: Convert to dtschema,
Animesh Agarwal
- Re: [drivers/gpio] Question about `ljca_gpio_config`: misuse of __counted_by,
Linus Walleij
- [PATCH 0/3] Update Konrad Dybcio's email addresses,
Konrad Dybcio
- [PATCH 05/17] dt-bindings: gpio: mpfs-gpio: Add PIC64GX GPIO compatibility,
pierre-henry.moussay
- [PATCH V2 6/6] dt-bindings: pinctrl: renesas: Document RZ/G2M v3.0 (r8a774a3) PFC support,
Oliver Rhodes
- [PATCH v3] of: remove internal arguments from of_property_for_each_u32(),
Luca Ceresoli
- [PATCH] dt-bindings: gpio: nxp,lpc32xx-gpio: Convert to dtschema,
Animesh Agarwal
- [PATCH] tools/gpio:Fix the wrong format specifier,
Zhu Jun
- [PATCH] pinctrl: renesas: rzg2l: Return -EINVAL if the pin doesn't support PIN_CFG_OEN,
Prabhakar
- [PATCH 0/3] add small improvements to the S32G pinctrl driver,
Andrei Stefanescu
- [RFC v7 0/6] PolarFire SoC GPIO support,
Conor Dooley
- [PATCH V1 resend 6/6] dt-bindings: pinctrl: renesas: Document RZ/G2M v3.0 (r8a774a3) PFC support, Oliver Rhodes
- [PATCH 6/6] dt-bindings: pinctrl: renesas: Document RZ/G2M v3.0 (r8a774a3) PFC support, Oliver Rhodes
- [PATCH v7 0/4] ADP5585 GPIO expander, PWM and keypad controller support,
Laurent Pinchart
- [PATCH] gpio: vf610: add get_direction() support,
haibo . chen
- [PATCH v2 0/7] riscv: sophgo: Add pinctrl support for CV1800 series SoC,
Inochi Amaoto
- [PATCH v6 0/4] ADP5585 GPIO expander, PWM and keypad controller support,
Laurent Pinchart
- [GIT PULL] pin control changes for v6.11,
Linus Walleij
- [brgl:gpio/for-current] BUILD SUCCESS 3ae08e47742eeebf2190900d31ddac53fdd13a5b, kernel test robot
- [brgl:pwrseq/for-current] BUILD SUCCESS 1a8c67a8b21e26843d5641c55f48130b3e323ce8, kernel test robot
- [PATCH v5 0/4] ADP5585 GPIO expander, PWM and keypad controller support,
Laurent Pinchart
- [PATCH] [v2] gpio: virtuser: avoid non-constant format string,
Arnd Bergmann
- [PATCH] gpio: virtuser: avoid non-constant format string,
Arnd Bergmann
- [brgl:pwrseq/for-current] BUILD SUCCESS ed70aaac7c359540d3d8332827fa60b6a45e15f2, kernel test robot
- [brgl:pwrseq/for-current] BUILD SUCCESS a19ce320c379e0519b68178c596e43d1d5dda03b, kernel test robot
- [PATCH libgpiod v3 00/18] dbus: add GLib-based D-Bus daemon and command-line client,
Bartosz Golaszewski
- [PATCH libgpiod v3 01/18] tests: split out reusable test code into a local static library, Bartosz Golaszewski
- [PATCH libgpiod v3 03/18] bindings: glib: add build files, Bartosz Golaszewski
- [PATCH libgpiod v3 06/18] bindings: glib: add examples, Bartosz Golaszewski
- [PATCH libgpiod v3 02/18] tests: split out the common test code for bash scripts, Bartosz Golaszewski
- [PATCH libgpiod v3 04/18] bindings: glib: add public headers, Bartosz Golaszewski
- [PATCH libgpiod v3 05/18] bindings: glib: add core code, Bartosz Golaszewski
- [PATCH libgpiod v3 07/18] bindings: glib: add tests, Bartosz Golaszewski
- [PATCH libgpiod v3 09/18] dbus: add build files, Bartosz Golaszewski
- [PATCH libgpiod v3 08/18] README: document GLib bindings, Bartosz Golaszewski
- [PATCH libgpiod v3 10/18] dbus: add the API definitions, Bartosz Golaszewski
- [PATCH libgpiod v3 11/18] dbus: add a wrapper around the gdbus-codegen generated header, Bartosz Golaszewski
- [PATCH libgpiod v3 13/18] dbus: add gpio-manager code, Bartosz Golaszewski
- [PATCH libgpiod v3 12/18] dbus: add data files, Bartosz Golaszewski
- [PATCH libgpiod v3 14/18] dbus: add tests, Bartosz Golaszewski
- [PATCH libgpiod v3 16/18] dbus: client: add tests, Bartosz Golaszewski
- [PATCH libgpiod v3 18/18] TODO: drop the DBus daemon from the list, Bartosz Golaszewski
- [PATCH libgpiod v3 15/18] dbus: add a command-line client, Bartosz Golaszewski
- [PATCH libgpiod v3 17/18] README: document the DBus API, Bartosz Golaszewski
- Re: [PATCH libgpiod v3 00/18] dbus: add GLib-based D-Bus daemon and command-line client, Bartosz Golaszewski
- Question about gpio-hog,
Bough Chen
- [PATCH 0/2] pinctrl: pinconf-generic: Add "input-schmitt-microvolt" property,
Inochi Amaoto
- [PATCH 0/2] gpio: davinci: improve wakeup capabilities,
Kevin Hilman
- [PATCH v2] of: remove internal arguments from of_property_for_each_u32(),
Luca Ceresoli
- [libgpiod][PATCH 0/4] Fix issues detected by static analyzer,
Iker Pedrosa
- [PATCH v2 0/7] pinctrl: npcm8xx: pin configuration changes,
Tomer Maimon
- [PATCH 0/6] mfd: add adp5585 gpio and pwm support,
Frank Li
- [PATCH 1/6] dt-bindings: mfd: Add i2c device adi5585, Frank Li
- [PATCH 2/6] mfd: adp5585: add ADI adp5585 core support, Frank Li
- [PATCH 3/6] gpio: adp5585-gpio: add adp5585-gpio support, Frank Li
- [PATCH 4/6] pwm: adp5585: add adp5585 PWM support, Frank Li
- [PATCH 5/6] arm64: dts: imx93-11x11-evk: add adi,adp5585 gpio and pwm, Frank Li
- [PATCH 6/6] arm64: dts: imx95-19x19-evk: add i2c2 and adi,adp5585, Frank Li
- Re: [PATCH 0/6] mfd: add adp5585 gpio and pwm support, Rob Herring (Arm)
- Re: [PATCH 0/6] mfd: add adp5585 gpio and pwm support, Krzysztof Kozlowski
- [PATCH] gpio: Drop explicit initialization of struct i2c_device_id::driver_data to 0,
Uwe Kleine-König
- [GIT PULL] gpio updates for v6.11-rc1,
Bartosz Golaszewski
- [PATCH v11 00/38] ep93xx device tree conversion,
Nikita Shubin via B4 Relay
- [PATCH] dt-bindings: pincfg-node: Add "input-schmitt" property,
Inochi Amaoto
- [PATCH] pinctrl: core: Use seq_putc() in three functions, Markus Elfring
- [PATCH v1 0/7] pinctrl: npcm8xx: pin configuration changes,
Tomer Maimon
- [PATCH v1 1/7] pinctrl: nuvoton: npcm8xx: clear polarity before set both edge, Tomer Maimon
- [PATCH v1 4/7] pinctrl: nuvoton: npcm8xx: remove unused smb4den pin, group, function, Tomer Maimon
- [PATCH v1 6/7] pinctrl: nuvoton: npcm8xx: modify clkrun and serirq pin configuration, Tomer Maimon
- [PATCH v1 7/7] pinctrl: nuvoton: npcm8xx: modify pins flags, Tomer Maimon
- [PATCH v1 5/7] pinctrl: nuvoton: npcm8xx: remove unused lpcclk pin, group, function, Tomer Maimon
- [PATCH v1 3/7] pinctrl: nuvoton: npcm8xx: add pin 250 to DDR pins group, Tomer Maimon
- [PATCH v1 2/7] pinctrl: nuvoton: npcm8xx: add gpi35 and gpi36, Tomer Maimon
- Re: [PATCH v1 0/7] pinctrl: npcm8xx: pin configuration changes, Jonas Gorski
- [PATCH 0/2] Cleanup the MAINTAINER's file,
Andi Shyti
- [PATCH 0/3] pinctrl: pinctrl-zynqmp: Add Versal platform support,
Sai Krishna Potthuri
- [brgl:gpio/for-next] BUILD SUCCESS dfda97e37de4c2fa4a079ae77737c6b9ed021f79, kernel test robot
- [PATCH] pinctrl: qcom: x1e80100: Update PDC hwirq map,
Konrad Dybcio
- How to set GPIOs persistently high with libgpiod,
Akash Borde
- [libgpiod][PATCH v3 0/2] bindings: python: fix line request by name with multiple entries,
Bartosz Golaszewski
- [PATCH v2] gpio: mc33880: Convert comma to semicolon,
Chen Ni
- [brgl:gpio/for-next] BUILD SUCCESS WITH WARNING 337049890b8cbbb4fb527c58976ea19f4dc747a0, kernel test robot
- [PATCH] gpio: mc33880: Convert comma to semicolon,
Chen Ni
- [PATCH 0/3] pinctrl: ti: ti-iodelay: Fix some error handling paths + 2 unrelated clean-ups,
Christophe JAILLET
- [PATCH] docs/pinctrl: fix typo in mapping example,
marc . ferland
- [PATCH AUTOSEL 4.19 4/7] gpio: pca953x: fix pca953x_irq_bus_sync_unlock race,
Sasha Levin
- [PATCH AUTOSEL 5.4 06/11] gpio: pca953x: fix pca953x_irq_bus_sync_unlock race, Sasha Levin
- [PATCH AUTOSEL 6.1 13/27] gpio: pca953x: fix pca953x_irq_bus_sync_unlock race, Sasha Levin
- [PATCH AUTOSEL 6.6 18/33] gpio: pca953x: fix pca953x_irq_bus_sync_unlock race, Sasha Levin
- [PATCH AUTOSEL 6.9 23/40] gpio: pca953x: fix pca953x_irq_bus_sync_unlock race, Sasha Levin
- [PATCH 0/4] dt-bindings: pinctrl: convert remaining qcom bindings to yaml,
Rayyan Ansari
- [PATCH 1/4] dt-bindings: pinctrl: qcom,apq8064-pinctrl: convert to dtschema, Rayyan Ansari
- [PATCH 2/4] dt-bindings: pinctrl: qcom,ipq8064-pinctrl: convert to dtschema, Rayyan Ansari
- [PATCH 3/4] dt-bindings: pinctrl: qcom,ipq4019-pinctrl: convert to dtschema, Rayyan Ansari
- [PATCH 4/4] dt-bindings: pinctrl: qcom,apq8084-pinctrl: convert to dtschema, Rayyan Ansari
- Re: [PATCH 0/4] dt-bindings: pinctrl: convert remaining qcom bindings to yaml, Bjorn Andersson
- Re: [PATCH 0/4] dt-bindings: pinctrl: convert remaining qcom bindings to yaml, Linus Walleij
- [PATCH] gpio: virtuser: actually use the "trimmed" local variable,
Bartosz Golaszewski
- [brgl:gpio/for-next 38/38] drivers/gpio/gpio-virtuser.c:400:24: warning: variable 'trimmed' set but not used,
kernel test robot
- [PATCH v2 0/2] pinctrl: qcom: Add the QCS9100 tlmm compatible,
Tengfei Fan
- [PATCH] pinctrl: rockchip: correct RK3328 iomux width flag for GPIO2-B pins,
Huang-Huang Bao
- [brgl:pwrseq/for-next] BUILD SUCCESS 50b040ef373293b4ae2ecdc5873daa4656724868, kernel test robot
- [PATCH v3 0/5] Convert Atmel PIO3 Pinctrl and GPIO bindings to yaml,
Manikandan Muralidharan
- [PATCH v10] gpio: virtuser: new virtual testing driver for the GPIO API,
Bartosz Golaszewski
- [PATCH PULL] pinctrl: samsung: Use scope based of_node_put() cleanups,
Krzysztof Kozlowski
- [libgpiod][PATCH] bindings: rust: tests: set direction when reconfiguring lines,
Bartosz Golaszewski
- [libgpiod][PATCH] bindings: cxx: tests: set direction when reconfiguring lines,
Bartosz Golaszewski
- [PATCH v2 0/5] Add support for Kontron OSM-S i.MX93 SoM and carrier board,
Frieder Schrempf
- [linusw-pinctrl:for-next] BUILD SUCCESS 11eaac6e8e72001c28d2043eb160736187b7977d, kernel test robot
- [brgl:gpio/for-current] BUILD SUCCESS f8d76c2c313c56d5cb894a243dff4550f048278d, kernel test robot
- [GIT PULL] gpio: fixes for v6.10-rc7,
Bartosz Golaszewski
- [GIT PULL] pinctrl: renesas: Updates for v6.11 (take three),
Geert Uytterhoeven
- [brgl:gpio/for-next] BUILD SUCCESS 9d9c1796a6ae70290c2e013fe4d79e99039a1015, kernel test robot
- [libgpiod][PATCH v2] README: list the development packages required to build the library,
Bartosz Golaszewski
- [libgpiod][PATCH] doc: fix sphinx config for rtd,
Kent Gibson
- [libgpiod][PATCH] bindings: python: correct spelling of repetitions,
Kent Gibson
- [PATCH 0/2] pinctrl: Constify read-only struct regmap_config,
Javier Carrasco
- [brgl:gpio/for-current] BUILD SUCCESS f07798d7bb9c46d17d80103fb772fd2c75d47919, kernel test robot
- [linusw-pinctrl:for-next] BUILD SUCCESS e25c349429e481972290d8eca8c6fe00c6e9da49, kernel test robot
- [linusw-pinctrl:devel] BUILD SUCCESS 30b7748b2bc888ac1283a2715119b32d6d50cead, kernel test robot
- [libgpiod][PATCH] README: list the development packages required to build the library,
Bartosz Golaszewski
- [brgl:at24/for-next] BUILD SUCCESS 3a9ba4e32230df6c48cda1fd5cbca6facacc74c2, kernel test robot
- [brgl:pwrseq/for-next] BUILD SUCCESS ba6294d28c428098e99a4139cde12ddb7e77bfa1, kernel test robot
- [PATCH 0/7] riscv: sophgo: Add pinctrl support for CV1800 series SoC,
Inochi Amaoto
- [PATCH v3] pinctrl: samsung: Add support for pull-up and pull-down,
Vishnu Reddy
- [PATCH] gpiolib: of: add polarity quirk for TSC2005,
Dmitry Torokhov
- [PATCH v2 0/2] Add Mobileye EyeQ5 pinctrl support,
Théo Lebrun
- [brgl:gpio/for-current] BUILD SUCCESS 3645ffaf2b334abaf5f53e5ca0f47465d91e69d2, kernel test robot
- [PATCH 00/20] Simplify of_property_for_each_u32(),
Luca Ceresoli
- [PATCH 01/20] of: add of_property_for_each_u32_new(), Luca Ceresoli
- [PATCH 02/20] clk: convert to of_property_for_each_u32_new(), Luca Ceresoli
- [PATCH 03/20] clk: qcom: convert to of_property_for_each_u32_new(), Luca Ceresoli
- [PATCH 04/20] clk: sunxi: clk-simple-gates: convert to of_property_for_each_u32_new(), Luca Ceresoli
- [PATCH 05/20] clk: sunxi: clk-sun8i-bus-gates: convert to of_property_for_each_u32_new(), Luca Ceresoli
- [PATCH 06/20] clocksource/drivers/samsung_pwm: convert to of_property_for_each_u32_new(), Luca Ceresoli
- [PATCH 07/20] bus: ti-sysc: convert to of_property_for_each_u32_new(), Luca Ceresoli
- [PATCH 08/20] lk: clk-conf: convert to of_property_for_each_u32_new(), Luca Ceresoli
- [PATCH 10/20] pinctrl: s32cc: convert to of_property_for_each_u32_new(), Luca Ceresoli
- [PATCH 11/20] irqchip/atmel-aic: convert to of_property_for_each_u32_new(), Luca Ceresoli
- [PATCH 14/20] tty: sysrq: convert to of_property_for_each_u32_new(), Luca Ceresoli
- [PATCH 17/20] ASoC: arizona: convert to of_property_for_each_u32_new(), Luca Ceresoli
- [PATCH 20/20] of: deprecate and rename of_property_for_each_u32(), Luca Ceresoli
- [PATCH 12/20] iio: adc: ti_am335x_adc: convert to of_property_for_each_u32_new(), Luca Ceresoli
- [PATCH 15/20] usb: usb251xb: convert to of_property_for_each_u32_new(), Luca Ceresoli
- [PATCH 19/20] powerpc/xive: convert to of_property_for_each_u32_new(), Luca Ceresoli
- [PATCH 18/20] powerpc/xive: convert to of_property_for_each_u32_new(), Luca Ceresoli
- [PATCH 09/20] gpio: brcmstb: convert to of_property_for_each_u32_new(), Luca Ceresoli
- [PATCH 16/20] mfd: ti_am335x_tscadc: convert to of_property_for_each_u32_new(), Luca Ceresoli
- [PATCH 13/20] pwm: samsung: convert to of_property_for_each_u32_new(), Luca Ceresoli
- Re: [PATCH 00/20] Simplify of_property_for_each_u32(), Rob Herring
- [PATCH 00/47] arm64: qcom: dts: add QCS9100 support,
Tengfei Fan
- [PATCH 02/47] arm64: dts: qcom: qcs9100: Introduce QCS9100 SoC dtsi, Tengfei Fan
- [PATCH 04/47] arm64: dts: qcom: qcs9100: Add QCS9100 RIDE board dts, Tengfei Fan
- [PATCH 01/47] dt-bindings: arm: qcom: Document QCS9100 SoC and RIDE board, Tengfei Fan
- [PATCH 03/47] arm64: dts: qcom: qcs9100: Introduce QCS9100 PMIC dtsi, Tengfei Fan
- [PATCH 07/47] dt-bindings: clock: document QCS9100 GCC compatible, Tengfei Fan
- [PATCH 05/47] dt-bindings: firmware: qcom,scm: document SCM on QCS9100 SoC, Tengfei Fan
- [PATCH 08/47] dt-bindings: mailbox: qcom-ipcc: Document the QCS9100 IPCC, Tengfei Fan
- [PATCH 06/47] dt-bindings: interconnect: qcom: document the interconnect compatibles for QCS9100, Tengfei Fan
- [PATCH 09/47] dt-bindings: phy: Add QMP UFS PHY comptible for QCS9100, Tengfei Fan
- [PATCH 10/47] dt-bindings: crypto: ice: Document QCS9100 inline crypto engine, Tengfei Fan
- [PATCH 11/47] dt-bindings: crypto: qcom,prng: document QCS9100, Tengfei Fan
- [PATCH 15/47] dt-bindings: usb: dwc3: Add QCS9100 compatible, Tengfei Fan
- [PATCH 12/47] dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QCS9100, Tengfei Fan
- [PATCH 13/47] dt-bindings: ufs: qcom: document QCS9100 UFS, Tengfei Fan
- [PATCH 16/47] dt-bindings: clock: qcom: describe the GPUCC clock for QCS9100, Tengfei Fan
- [PATCH 14/47] dt-bindings: phy: qcom,qmp-usb: Add QCS9100 USB3 PHY, Tengfei Fan
- [PATCH 18/47] dt-bindings: phy: describe the Qualcomm SGMII PHY for QCS9100, Tengfei Fan
- [PATCH 20/47] dt-bindings: interrupt-controller: qcom,pdc: document pdc on QCS9100, Tengfei Fan
- [PATCH 17/47] dt-bindings: arm-smmu: Document QCS9100 GPU SMMU, Tengfei Fan
- [PATCH 21/47] dt-bindings: thermal: qcom-tsens: document the QCS9100 Temperature Sensor, Tengfei Fan
- [PATCH 19/47] dt-bindings: cache: qcom,llcc: Add QCS9100 description, Tengfei Fan
- [PATCH 25/47] dt-bindings: watchdog: qcom-wdt: document QCS9100, Tengfei Fan
- [PATCH 22/47] dt-bindings: soc: qcom,aoss-qmp: Document the QCS9100 AOSS channel, Tengfei Fan
- [PATCH 23/47] dt-bindings: pinctrl: add qcs9100-tlmm compatible, Tengfei Fan
- [PATCH 27/47] dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCS9100 compatibles, Tengfei Fan
- [PATCH 24/47] dt-bindings: soc: qcom: add qcom,qcs9100-imem compatible, Tengfei Fan
- [PATCH 28/47] dt-bindings: power: qcom,rpmpd: document the QCS9100 RPMh Power Domains, Tengfei Fan
- [PATCH 29/47] dt-bindings: net: qcom,ethqos: add description for qcs9100, Tengfei Fan
- [PATCH 26/47] dt-bindings: clock: qcom-rpmhcc: Add RPMHCC bindings for QCS9100, Tengfei Fan
- [PATCH 30/47] dt-bindings: PCI: Document compatible for QCS9100, Tengfei Fan
- [PATCH 31/47] dt-bindings: PCI: qcom-ep: Add support for QCS9100 SoC, Tengfei Fan
- [PATCH 33/47] interconnect: qcom: add driver support for qcs9100, Tengfei Fan
- [PATCH 34/47] clk: qcom: add the GCC driver support for QCS9100, Tengfei Fan
- [PATCH 32/47] dt-bindings: phy: qcom,qmp: Add qcs9100 QMP PCIe PHY, Tengfei Fan
- [PATCH 36/47] phy: qcpm-qmp-usb: Add support for QCS9100, Tengfei Fan
- [PATCH 37/47] clk: qcom: add the GPUCC driver support for QCS9100, Tengfei Fan
- [PATCH 35/47] phy: qcom-qmp-ufs: Add QCS9100 support, Tengfei Fan
- [PATCH 40/47] pinctrl: qcom: add the tlmm driver support for qcs9100 platform, Tengfei Fan
- [PATCH 41/47] clk: qcom: rpmh: Add support for QCS9100 rpmh clocks, Tengfei Fan
- [PATCH 38/47] phy: qcom: add the SGMII SerDes PHY driver support, Tengfei Fan
- [PATCH 39/47] soc: qcom: llcc: Add llcc configuration support for the QCS9100 platform, Tengfei Fan
- [PATCH 00/47] arm64: qcom: dts: add QCS9100 support, Tengfei Fan
- [PATCH 01/47] dt-bindings: arm: qcom: Document QCS9100 SoC and RIDE board, Tengfei Fan
- [PATCH 02/47] arm64: dts: qcom: qcs9100: Introduce QCS9100 SoC dtsi, Tengfei Fan
- [PATCH 03/47] arm64: dts: qcom: qcs9100: Introduce QCS9100 PMIC dtsi, Tengfei Fan
- [PATCH 05/47] dt-bindings: firmware: qcom,scm: document SCM on QCS9100 SoC, Tengfei Fan
- [PATCH 06/47] dt-bindings: interconnect: qcom: document the interconnect compatibles for QCS9100, Tengfei Fan
- [PATCH 04/47] arm64: dts: qcom: qcs9100: Add QCS9100 RIDE board dts, Tengfei Fan
- [PATCH 07/47] dt-bindings: clock: document QCS9100 GCC compatible, Tengfei Fan
- [PATCH 12/47] dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QCS9100, Tengfei Fan
- [PATCH 10/47] dt-bindings: crypto: ice: Document QCS9100 inline crypto engine, Tengfei Fan
- [PATCH 13/47] dt-bindings: ufs: qcom: document QCS9100 UFS, Tengfei Fan
- [PATCH 14/47] dt-bindings: phy: qcom,qmp-usb: Add QCS9100 USB3 PHY, Tengfei Fan
- [PATCH 15/47] dt-bindings: usb: dwc3: Add QCS9100 compatible, Tengfei Fan
- [PATCH 19/47] dt-bindings: cache: qcom,llcc: Add QCS9100 description, Tengfei Fan
- [PATCH 18/47] dt-bindings: phy: describe the Qualcomm SGMII PHY for QCS9100, Tengfei Fan
- [PATCH 21/47] dt-bindings: thermal: qcom-tsens: document the QCS9100 Temperature Sensor, Tengfei Fan
- [PATCH 17/47] dt-bindings: arm-smmu: Document QCS9100 GPU SMMU, Tengfei Fan
- [PATCH 09/47] dt-bindings: phy: Add QMP UFS PHY comptible for QCS9100, Tengfei Fan
- [PATCH 23/47] dt-bindings: pinctrl: add qcs9100-tlmm compatible, Tengfei Fan
- [PATCH 20/47] dt-bindings: interrupt-controller: qcom,pdc: document pdc on QCS9100, Tengfei Fan
- [PATCH 11/47] dt-bindings: crypto: qcom,prng: document QCS9100, Tengfei Fan
- [PATCH 08/47] dt-bindings: mailbox: qcom-ipcc: Document the QCS9100 IPCC, Tengfei Fan
- [PATCH 24/47] dt-bindings: soc: qcom: add qcom,qcs9100-imem compatible, Tengfei Fan
- [PATCH 25/47] dt-bindings: watchdog: qcom-wdt: document QCS9100, Tengfei Fan
- [PATCH 28/47] dt-bindings: power: qcom,rpmpd: document the QCS9100 RPMh Power Domains, Tengfei Fan
- [PATCH 29/47] dt-bindings: net: qcom,ethqos: add description for qcs9100, Tengfei Fan
- [PATCH 27/47] dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCS9100 compatibles, Tengfei Fan
- [PATCH 22/47] dt-bindings: soc: qcom,aoss-qmp: Document the QCS9100 AOSS channel, Tengfei Fan
- [PATCH 16/47] dt-bindings: clock: qcom: describe the GPUCC clock for QCS9100, Tengfei Fan
- [PATCH 26/47] dt-bindings: clock: qcom-rpmhcc: Add RPMHCC bindings for QCS9100, Tengfei Fan
- Re: [PATCH 00/47] arm64: qcom: dts: add QCS9100 support, Krzysztof Kozlowski
- Re: [PATCH 00/47] arm64: qcom: dts: add QCS9100 support, Dmitry Baryshkov
- Re: [PATCH 00/47] arm64: qcom: dts: add QCS9100 support, patchwork-bot+netdevbpf
- [PATCH 1/1] dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,ls1046a-gpio,
Frank Li
- [PATCH 0/7] Add support for Kontron OSM-S i.MX93 SoM and carrier board,
Frieder Schrempf
- [linusw-gpio:b4/asoc-tas-gpios] BUILD SUCCESS 3af06073a9474b89fd1d92ba0d338781305af34a, kernel test robot
- [PATCH v2] gpiolib: of: fix lookup quirk for MIPS Lantiq,
Dmitry Torokhov
- [GIT PULL v2] pinctrl: renesas: Updates for v6.11 (take two),
Geert Uytterhoeven
- [PATCH v13 0/8] Turris Omnia MCU driver,
Marek Behún
- [brgl:gpio/for-next] BUILD SUCCESS 3550b5db3af4d0ff7f2ad07367af6427534620f0, kernel test robot
- [brgl:gpio/for-current] BUILD SUCCESS b440396387418fe2feaacd41ca16080e7a8bc9ad, kernel test robot
- [linusw-pinctrl:for-next] BUILD SUCCESS 0cd9f140389bcd876e23aa3c06eea07f42892ad4, kernel test robot
- [linusw-pinctrl:b4/imx-scmi-generic] BUILD SUCCESS ecf749cdb24eb1c205705e43c12a27fae61cf4d2, kernel test robot
- [PATCH RESEND libgpiod v2 00/18] dbus: add GLib-based DBus daemon and command-line client,
Bartosz Golaszewski
- [PATCH RESEND libgpiod v2 01/18] tests: split out reusable test code into a local static library, Bartosz Golaszewski
- [PATCH RESEND libgpiod v2 03/18] bindings: glib: add build files, Bartosz Golaszewski
- [PATCH RESEND libgpiod v2 02/18] tests: split out the common test code for bash scripts, Bartosz Golaszewski
- [PATCH RESEND libgpiod v2 04/18] bindings: glib: add public headers, Bartosz Golaszewski
- [PATCH RESEND libgpiod v2 05/18] bindings: glib: add core code, Bartosz Golaszewski
- [PATCH RESEND libgpiod v2 06/18] bindings: glib: add examples, Bartosz Golaszewski
- [PATCH RESEND libgpiod v2 08/18] README: document GLib bindings, Bartosz Golaszewski
- [PATCH RESEND libgpiod v2 07/18] bindings: glib: add tests, Bartosz Golaszewski
- [PATCH RESEND libgpiod v2 10/18] dbus: add the API definitions, Bartosz Golaszewski
- [PATCH RESEND libgpiod v2 09/18] dbus: add build files, Bartosz Golaszewski
- [PATCH RESEND libgpiod v2 11/18] dbus: add a wrapper around the gdbus-codegen generated header, Bartosz Golaszewski
- [PATCH RESEND libgpiod v2 12/18] dbus: add data files, Bartosz Golaszewski
- [PATCH RESEND libgpiod v2 14/18] dbus: add tests, Bartosz Golaszewski
- [PATCH RESEND libgpiod v2 13/18] dbus: add gpio-manager code, Bartosz Golaszewski
- [PATCH RESEND libgpiod v2 16/18] dbus: client: add tests, Bartosz Golaszewski
- [PATCH RESEND libgpiod v2 17/18] README: document the DBus API, Bartosz Golaszewski
- [PATCH RESEND libgpiod v2 18/18] TODO: drop the DBus daemon from the list, Bartosz Golaszewski
- [PATCH RESEND libgpiod v2 15/18] dbus: add a command-line client, Bartosz Golaszewski
- Re: [PATCH RESEND libgpiod v2 00/18] dbus: add GLib-based DBus daemon and command-line client, Sverdlin, Alexander
- [PATCH] gpiolib: of: fix lookup quirk for MIPS Lantiq,
Dmitry Torokhov
- [PATCH 0/2] Add Mobileye EyeQ5 pinctrl support,
Théo Lebrun
- [PATCH libgpiod v2 00/18] dbus: add GLib-based DBus daemon and command-line client,
Bartosz Golaszewski
[Index of Archives]
[Linux SPI]
[Security]
[Linux ARM]
[Fedora ARM]
[eCos]
[Linux MIPS]
[Bugtraq]