On Mon, Oct 21, 2024 at 04:04:13PM GMT, Melody Olvera wrote: > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8750-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8750-tlmm.yaml [..] > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + tlmm: pinctrl@f100000 { > + compatible = "qcom,sm8750-tlmm"; > + reg = <0x0f100000 0x300000>; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&tlmm 0 0 211>; I know it's just an example, but I think this number should be 216. Please also correct it in the dtsi, where you made it 220. Regards, Bjorn > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > + > + gpio-wo-state { > + pins = "gpio1"; > + function = "gpio"; > + }; > + > + uart-w-state { > + rx-pins { > + pins = "gpio60"; > + function = "qup1_se7"; > + bias-pull-up; > + }; > + > + tx-pins { > + pins = "gpio61"; > + function = "qup1_se7"; > + bias-disable; > + }; > + }; > + }; > +... > -- > 2.46.1 >