Re: [PATCH v2] dt-bindings: pinctrl: convert pinctrl-mcp23s08.txt to yaml format

[Krzysztof Kozlowski <krzk@xxxxxxxxxx>]

On 26/10/2024 17:02, Tarang Raval wrote:
> Hi Krzysztof , Himanshu
> 
>>>> +
>>>> +    i2c {
>>>
>>> Keep one complete example for i2c and one for spi. This was not in
>>> previous patch and change log does not explain why you need three
>>> examples.
>>
>> Okay, I will drop one example of I2C
> 
> In ex1: use when you only need basic GPIO and interrupt capabilities 
> without additional pin control and in ex2: use when you need pull-up 
> resistors on specific GPIO pins or a reset line.
> 
> Original bindings state that this node can be implemented in two 
> different ways, so we should maintain both examples for reference.

Example is not the binding. If you claim conversion is incomplete, it
must be done through the binding, not example.

> 
> But it's up to you, I trust your expertise on this, Krzysztof
> 
>>>> +        #address-cells = <1>;
>>>> +        #size-cells = <0>;
>>>> +
>>>> +        mcp23017: gpio@21 {
>>>
>>> Drop unused label
>>  
>> May I know how its unused, AFAIK, Since it's an I/O expanded, it’s referenced elsewhere, so keeping it is necessary for >functionality.
> 
> I agree with Himanshu. 
> It's definitely used for reset GPIOs, LED pins, or something similar.

So point to the specific line in this file. Really, it's no different
than every other binding. If it is different, provide some arguments why
this is different.

Best regards,
Krzysztof