Am Montag, den 14.04.2008, 22:10 +0800 schrieb timf: > Hartmut Hackmann wrote: > > Hi > > <snip> > Just to be sure: > > - you are aware that you can't use analog and dvb simultanously? > > - you are aware that after stopping a dvb application it takes about a > > second before the dvb driver releases the card and the analog tuner > > can be used? > > - did you mix up the antenna inputs? > > > > Hartmut > > > > OK, start completely new again. > > This is exactly as it was when I asked for your help: > need to start analog-tv before can use dvb-t > > timf@ubuntu:~$ hg clone http://linuxtv.org/hg/v4l-dvb > timf@ubuntu:~$ cd v4l-dvb > timf@ubuntu:~$ make > timf@ubuntu:~$ sudo make install > > -> shutdown > -> power-cycle (1 hour no power) > > timf@ubuntu:~$ sudo -s -H > root@ubuntu:/home/timf# tzap -r "TEN HD" > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > tuning to 788500000 Hz > video pid 0x0202, audio pid 0x0000 > status 00 | signal ffff | snr 0000 | ber 0001fffe | unc 00000000 | > status 1f | signal ffff | snr 0000 | ber 000117e6 | unc ffffffff | > FE_HAS_LOCK > status 1f | signal ffff | snr 0000 | ber 00011902 | unc ffffffff | > FE_HAS_LOCK > status 00 | signal ffff | snr 0000 | ber 0001fffe | unc 00000000 | > status 00 | signal ffff | snr 0000 | ber 0001fffe | unc 00000000 | > status 00 | signal ffff | snr 0000 | ber 0001fffe | unc 00000000 | > status 1f | signal ffff | snr 0000 | ber 00012076 | unc ffffffff | > FE_HAS_LOCK > status 00 | signal ffff | snr 0000 | ber 0001fffe | unc 00000000 | > status 1f | signal ffff | snr 0000 | ber 000120d6 | unc ffffffff | > FE_HAS_LOCK > status 00 | signal ffff | snr 0000 | ber 0001fffe | unc 00000000 | > status 1f | signal ffff | snr 0000 | ber 00011abe | unc ffffffff | > FE_HAS_LOCK > status 1f | signal ffff | snr 0000 | ber 00011938 | unc ffffffff | > FE_HAS_LOCK > status 00 | signal ffff | snr 0000 | ber 0001fffe | unc 00000000 | > status 1f | signal ffff | snr 0000 | ber 0001198a | unc ffffffff | > FE_HAS_LOCK > status 00 | signal ffff | snr 0000 | ber 0001fffe | unc 00000000 | > status 01 | signal ffff | snr 0000 | ber 00011e5c | unc ffffffff | > status 1f | signal ffff | snr 0000 | ber 00011a14 | unc ffffffff | > FE_HAS_LOCK > status 1f | signal ffff | snr 0000 | ber 00011962 | unc ffffffff | > FE_HAS_LOCK > status 1f | signal ffff | snr 0000 | ber 00011cf4 | unc ffffffff | > FE_HAS_LOCK > status 1f | signal ffff | snr 0000 | ber 00011906 | unc ffffffff | > FE_HAS_LOCK > status 00 | signal ffff | snr 0000 | ber 0001fffe | unc 00000000 | > status 1f | signal ffff | snr 0000 | ber 000118f2 | unc ffffffff | > FE_HAS_LOCK > status 1f | signal ffff | snr 3030 | ber 00013348 | unc ffffffff | > FE_HAS_LOCK > > -> start tvtime -> viewing SBS -> stop tvtime > > root@ubuntu:/home/timf# tzap -r "TEN HD" > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > tuning to 788500000 Hz > video pid 0x0202, audio pid 0x0000 > status 00 | signal 9b9b | snr 6060 | ber 0001fffe | unc 00000000 | > status 1f | signal 9b9b | snr fdfd | ber 00000248 | unc ffffffff | > FE_HAS_LOCK > status 1f | signal 9a9a | snr fefe | ber 00000294 | unc 00000000 | > FE_HAS_LOCK > status 1f | signal 9a9a | snr fefe | ber 000002f6 | unc 00000000 | > FE_HAS_LOCK > status 1f | signal 9a9a | snr fefe | ber 000002a0 | unc 00000000 | > FE_HAS_LOCK > status 1f | signal 9a9a | snr fefe | ber 00000264 | unc 00000000 | > FE_HAS_LOCK > status 1f | signal 9a9a | snr fefe | ber 0000024a | unc 00000000 | > FE_HAS_LOCK > status 1f | signal 9a9a | snr fefe | ber 0000027a | unc 00000000 | > FE_HAS_LOCK > status 1f | signal 9a9a | snr fefe | ber 0000020c | unc 00000000 | > FE_HAS_LOCK > status 1f | signal 9a9a | snr fefe | ber 00000218 | unc 00000000 | > FE_HAS_LOCK > status 1f | signal 9b9b | snr fefe | ber 000001c6 | unc 00000000 | > FE_HAS_LOCK > status 1f | signal 9b9b | snr fefe | ber 00000188 | unc 00000000 | > FE_HAS_LOCK > > > Regards, > Tim Hi, I have no idea yet, same goes for Frederic reporting the same kernel 2.6.24 once working and after a distribution upgrade not anymore. For sure the gpio antenna and mode switching for me works on both type of cards. tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision 29 -- ok saa7133[0]/dvb: setting GPIO21 to 0 (TV antenna?) saa7133[0]/dvb: setting GPIO21 to 1 (Radio antenna?) saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision 29 -- ok saa7133[1]/dvb: setting GPIO21 to 1 (Radio antenna?) saa7133[1]/dvb: setting GPIO21 to 0 (TV antenna?) saa7133[1]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[1]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[1]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[1]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[1]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[1]: gpio: mode=0x0200000 in=0x0000000 out=0x0200000 [Radio] saa7133[1]: gpio: mode=0x0200000 in=0x0000000 out=0x0200000 [Radio] saa7133[1]: gpio: mode=0x0200000 in=0x0000000 out=0x0200000 [Radio] saa7134 ALSA driver for DMA sound loaded saa7133[0]/alsa: saa7133[0] at 0xe8000000 irq 19 registered as card -1 saa7133[1]/alsa: saa7133[1] at 0xe8001000 irq 18 registered as card -1 saa7133[2]/alsa: saa7133[2] at 0xe8002000 irq 17 registered as card -1 Cheers, Hermann _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
