Hi, folks In my personal repository at http://linuxtv.org/hg/~hhackmann/v4l-dvb/ there are 2 changes that affect all DVB-S cards with tda10086 - The reference frequency (crystal) of the tda10086 now is an option of the tda10086_config struct. This is necessary i.e. for cards with the SD1878 tuner. I adapted the driver for these boards: - TT Budget-S-1401 - Pinnacle 400e / Technotrend USB - Lifeview Flydvb Trio - Medion MD8800 - Lifeview Flydvbs LR300 - Philips Snake - MD7134 (Bridge 2 - works now) - The bandwidth of the tda826x baseband filter is now set according to the expected symbol rate. The boards with this tuner now should work with transponders providing a higher symbol rate than usual. This patch was provided by Oliver Endriss. I tried to make the changes backward compatibe but since i can't test these cards, i need your feedback. Oliver: there was no signature in your patch. But of corse i mentioned you in the log. I hope that's ok for you. Have fun Hartmut _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
